Can no longer use the Remote app on iPhone 5 or iPad 1

Hi,
I've long used the Remote app to control my iTunes library which I stream through two Airport Expresses. It's been a great solution for some time.
However, since the latest updates, I can no longer do this. The iTunes library does not show up in the app, only a message telling me to turn on Home Sharing in iTunes.
I have turned Sharing off and on on the iPhone, iPad and iTunes but have had no luck getting it to work.
Any suggestions welcome!
Thanks
Phil

Thanks Linc,
well that *****... I guess I am going to have to reach out to the developers. It does not look like they are doing this anytime soon cause the website is pretty old in itself.
Thanks for the info on this,
Paul

Similar Messages

  • Ok...so I can no longer use the ppc app that I loved for so long...but...

    Hi All:
    I am finally at the point where I am finally accepting that I cannot use my favorite ppc app, MacMame. Since upgrading to Lion (with no Rosetta) I can no longer play my favorite arcade games which is fine.
    In reading some online forums and blogs I found that if the developer of the program has a universal or intel version of the dmg that I can use this program on Lion again.
    Does anyone know how I can convert this ppc version to Universal or Intel running app? Is there an App for that to convert?
    Thanks for any help or advice on this.
    Paul
    P.S. - I am not running a partition with SL just to use this program. It is not worth the time.

    Thanks Linc,
    well that *****... I guess I am going to have to reach out to the developers. It does not look like they are doing this anytime soon cause the website is pretty old in itself.
    Thanks for the info on this,
    Paul

  • HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

    The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
    This seem to happen after the update. Any suggestions?

    Dear Apple friends,
    I have the exact same problem with some apps.
    Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
    Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
    I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
    Should I update to the latest firmware and do what raymond73 said?
    Is there a fix for this issue?
    Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
    Is it possible to downgrade to iOS 6?
    Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
    Should I wait or go to the place I bought it and try to get the money back?

  • I used to able to access and listen to my itunes library from my ipad using the remote app but this no longer works.  I am connected but sound thru ipad.  Is this because of they want us to use itunes match

    I used to able to access and listen to my itunes library on my ipad  using the remote app but this no longer works.  I am connected but sound thru ipad- just controls my library on iMac.  Is this because of they want us to use itunes match

    That has nothing to do with iTunes match. The Remote app on iPad can control the computer's iTunes but not play content from iTunes on your iPad.
    To play for example iTunes imusic on iPad
    You need to have Home Sharing On.
    Check Settings > Music > Home Sharing (key in your Apple ID & password here, must be the same on computer's iTunes)
    Start iPad's Music app, tap the ... More (bottom right), tap Shared.
    Choose your iTunes' library and have fun.

  • My husband has paired his phone using the remote app to the TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

    My husband has paired his phone using the remote app to the apple TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

    Yes I believe so. Try it and see you can always delete the Apple TV from a remote if it messes things up.
    But we have three remotes setup to do this. My iPhone and iPad and my wifes iPhone. She has a different iTunes logon but it seems to work fine

  • Can I use the remote app on my iphone to link with the ipad2 ?

    Can I use the remote app on my iphone to link with the ipad2 ?

    This is to control the music library to be more specific.

  • HT1947 After updating My Apple TV to 5.1 I can browse music library using the Remote app on my iPhone and iPad but cannot select a song to play. Is someone else having the same problem?

    I have updated my Apple TV to 5.1. Using the Remote app on my IPhone and iPad I can browse the music library on the Apple TV but I cannot select a song to play. Has someone else the same problem?
    Mats

    I think I found the reason. On my iMac that is hosting the music library a song already was playing. This seems to block out me from selecting another song though my Apple TV.
    Mats

  • TS1702 after upgrading to ios 6 i can  no longer use the app store.

    after upgrading to ios 6 i can  no longer use the app store on my iPhone, i am unable to install new apps. i chose to fill out the security questions and the problem seems to occur since then. what could be a solution to get the app store working again??

    i just contacted apple support and the solution is the following!!!!!
    connect the iphone to your computer  and open itunes
    then click on itunes store at the left side of the screen
    then click at the right top side of your itunes screen on your email address (or id that is displayed there in the black bar)
    choose log out
    then go to the top of the screen with the search option in itunes where you can search in the store and choose an app that you have not yet installed.
    then you get the security questions also in itunes, fill the them out and after you have done that you are asked to log in again
    now when you install an app that works (it is then on your computer still)
    open the app store on your iphone and choose the updates button and install the app from the cloud
    now when you install new apps also from the app store on your iphone it works again!!! and you are no longer asked about the security questions
    (the other option they told me (that i did not have to use)  is: go to settings/general/ all the way at the bottom of the screen choose make new settings restore networksettings and choose yes)

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

    I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • HT1947 Can I use the "Remote" app to turn the Apple TV on and off?

    Can I use the "Remote" app to turn the Apple TV on and off?

    Welcome to the Apple Community.
    The Apple TV doesn't switch on and of, it goes to sleep and wakes up, but yes you can perform these actions using the remote app.

  • How do I use the remote app on a dual band network?

    There are 2 routers in my home. One is dual band (SSID: NETGEAR49-5G). This one is being used as a 5GHz access point while the other (SSID: NETGEAR49) is being used as a 2.4GHz extender. However I can't use the Remote app to control my iTunes library, regardless of which router I connect to. I can't even use a passcode to add my library because I just keep getting an error saying I entered the wrong code. Strangely everything's fine if I turn off the 2.4GHz router, but I don't want to have to keep doing that. Is there any way I can configure the two routers so I can use the Remote app and other network-based services??

    Hi,
    I can tell you how it works on my iPhone.
    I click the Messages icon to open it.
    I click the box with pencil icon top right for New Message
    I start to type the name of the person I want to contact in the "To" spot.
    (Alternatively use the Blue + icon and select direct from Contacts list)
    I select the full name of Contact from any list if there are multiples.
    Once the person and their Contact option is selected I click on the text field at the bottom of screen
    Using the "keyboard" I type the Message and then  the Send button.
    9:45 PM      Saturday; June 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.7.4),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Since iOS 8.1.1 I can no longer use my mail app.

    Since iOS 8.1.1 I can no longer use my mail app on my iPad Mini. The mail app opens and updates, however the screen does not respond to anything. Am rather stuck as to what to do. This is the Mail App that comes with the iPad Mini.
    I have tried to turn the iPad On/Off all to no avail. I don't really want to reset my iPad as this will cause more trouble than it is worth and will ultimately update the iPad to iOS 8.1.1 anyway. Do any of you have any suggestions that don't involve resetting the iPad ?
    Thanks All

    Before you delete your mail accounts, try giving your iPad a reset and force closing the mail app. It may clear up the glitch before you remove and add your info again
    Reset
    Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.
    Force close an app
    Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
    If those don't fix it then try to remove and put your info back in.

  • HT1947 Does anyone else have my problem with atv3? Plays films in iTunes without any problems but on music every time I use the remote app on my iPhone 3GS it stops playing after around 5 tracks in. Anyone having this problem?

    Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this is human error on my part?

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Connecting my iPhone using the remote app.

    I am trying to connect my iPhone using the remote app, nothing seems to work. I have been told to go to Preferences > Devices and allow iTunes to search for iPhone ect but there isn't this option when I go there?

    You do not have to dock your iPhone to use an iOS remote app to control your Mac.
    There are both Wifi and Bluetooth style iOS remote apps for both iPhone/iPod and iPad.
    Apple makes the one you are using. I believe that Apple's app can use both WiFi and Bluetooth.
    I use a very exceptional Wifi remote app on iOS that is called Rowmote Pro.
    This app has a really good feature set, plus you can control other aspects of your Mac with it.

Maybe you are looking for

  • SharePoint 2013 Installation on Windows Server 2012 R2

    https://technet.microsoft.com/en-in/evalcenter/hh973397.aspx   the version mentioned in blog ,does it included SP1 ? please confirm.  and also I have downloaded the above and trying to install on Windows Server 202 R2 . I m getting application server

  • YouTube app not working on iPad

    iPad YouTube app and YouTube on Safari not working, just get black screen with spinning icon. Both worked earlier this week. Have no problems with YouTube on my MacBook Pro. All are on same wireless network same distance.

  • How to know file names & version on EBS 12.1.1

    Hi guys Please help I work with EBS 12..1.1 on HP-UX When apply patch no. 8429053 to support financial consultant ,I read the patch read me and as required I must know the file name and version as following . *3. Fixed File Names and versions* *$xla/

  • DB creation failure [RAC, Suse and 9i]

    We have managed to install 9i on a 2 server Linux cluster. All indications are that both nodes and the shared storage are up and running correctly. When we use dbca to create a clustered database, both nodes show up as install options. However, when

  • NATting both ways

    I have a 2811s doing many VPNs to partners and clients. These routers are on my "VPN" network off a PIX 525. I use static routes on the PIX to get the traffic from my networks to the appropriate router and then down the VPN. This has been the setup f