Can not connect to Admin Console FMS 3.5 running separate Apache Server
Hi All! I have installed the FMS 3.5 Server on a separate IP from our main Apache Server: The server is running Redhat Linux 2.6.18-128.1.10.el5
FMS 3.5 running on ***.***.**.138 using ports 1935, 8080 (Admin Server using port 1111)
Apache 2 running on ***.***.**.139 using port 80, 443. (several sites setup on this IP)
However, when accessing the fms_adminConsole.htm in the root directory of one of the domains on ***.***.**.139, all login attempts fail. I am connecting to localhost and using the assigned user and password set up in fms.ini. Using either IP fails as well. The FMS server is set up to listen to all hosts as no specific IPs were set.
/var/log/messages show that FMS and the Admin Server are up an running and listening:
Jul 7 12:15:37 228215-web1 Service[28196]: Server starting...
Jul 7 12:15:37 228215-web1 Service[28196]: Server started (/opt/adobe/fms/conf/Server.xml).
Jul 7 12:15:37 228215-web1 Adaptor[28216]: Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4
Jul 7 12:15:38 228215-web1 Adaptor[28216]: Listener started ( _defaultRoot__edge1 ) : 1935/v4
Jul 7 12:15:38 228215-web1 Adaptor[28216]: Listener started ( _defaultRoot__edge1 ) : 8080/v4
Jul 7 12:16:20 228215-web1 Service[28480]: Server starting...
Jul 7 12:16:20 228215-web1 Adaptor[28480]: Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
Jul 7 12:16:21 228215-web1 Adaptor[28480]: Listener started ( FCSAdminAdaptor ) : 1111/v4
Jul 7 12:16:22 228215-web1 Service[28480]: Server started (./conf/Server.xml).
All other settings for FMS are default. This is my first time setting up FMS as a fresh install on a new unknown server and I am at a loss as to what settings to check or which files I may need to modify to get it to connect properly. It is a managed server is hosted by rackspace.com if that makes any difference.
Sorry if I have not provided enough info... let me know what I missed and I will supply it.
Sorry for the confusion! *I* am the one really confused. But to answer your question (I hope), the webpage is on the same physical server as the FMS server, but I am using an outside network (I am not on the local server network) to browse the webpages.
Both IPs fail when trying to reach:
http://***.***.**.138:1111
http://***.***.**.139:1111
Does that mean the ports are blocked? The /var/log/messages shows:
Jul 7 13:20:37 228215-web1 Service[29862]: Server starting...
Jul 7 13:20:37 228215-web1 Service[29862]: Server started (/opt/adobe/fms/conf/Server.xml).
Jul 7 13:20:37 228215-web1 Adaptor[29882]: Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4
Jul 7 13:20:38 228215-web1 Adaptor[29882]: Listener started ( _defaultRoot__edge1 ) : 1935/v4
Jul 7 13:20:38 228215-web1 Adaptor[29882]: Listener started ( _defaultRoot__edge1 ) : 8080/v4
Jul 7 13:20:51 228215-web1 Service[30144]: Server starting...
Jul 7 13:20:51 228215-web1 Adaptor[30144]: Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
Jul 7 13:20:52 228215-web1 Adaptor[30144]: Listener started ( FCSAdminAdaptor ) : 1111/v4
Jul 7 13:20:53 228215-web1 Service[30144]: Server started (./conf/Server.xml).
Similar Messages
-
I can not connect to the database via C#. The database is showing full path of the database file instead of the database name. See the pic: a database showing only name 'emart' and the other database showing the full path.
: RobbyHi,
According to your post, I know that the database name is showing file path of the database rather than the database name in SQL Server Management Studio. You were not able to
establish a connection to the database using C#.
As Olaf said, was any error message thrown out when the connection failed? How did you create these databases?
You can use the following T-SQL to attach the database and see if the issue persists.
CREATE DATABASE
databasename
ON (FILENAME = 'filepath _Data.mdf'),
(FILENAME = 'filepath_Log.ldf')
FOR ATTACH;
Thanks.
Tracy Cai
TechNet Community Support -
No application showing in planning web & can't connect to admin console
Hi,
Planning web screen showing 'No aApplication available" even though I worked with planning application yesterday also and after that I am sure nobody have deleted that application. Also I can't login into essbase admin console as it is showing "cannot connect to administration server" though I have checked in services console that hyperion administration services is running.
One exception I got is shared services is not running. So I started that but after some time automatically went to stopped mode. Then I stopped all the services and restart the server and restart the services sequentially---- no hope. Same problem still there.
Can you please suggest how to solve the aforesaid?
Thanks & Regards.Hi,
Thanks for your reply. I have tried that but still the same error having in admin console. I have not craeted/modified anything in planning cluster in last some days. The problem is that all services is started properly except 'shared services' service. When I go to start that it is starting and showing started but after some time, automatically stopped. I also tried the following-----
1) Stopped all the other services except OpenLDAP
2) then started the shared services from start-> run-> hyperion-> foundation services-> start shared services
and got the error like---
Driver][Oracle]ORA-12505 Connection refused, the specified SID (xxxxx) was no
recognized by the Oracle server.
Database configuration test failed. Use Configuration Utility to configure the
atabase connectivity
Unable to connect to database. Will try to re-connect after sleeping for 30 sec
nds...
Attempting to connect to database: Retry Count: 1
Unable to connect to database. Will try to re-connect after sleeping for 30 sec
nds...
Don't know what is happening....Any idea about the same? How could the problem be solved?
OR should I reinstall hyperion afresh.....
Regards. -
Can not connect with ADMIN account
Hi,
I've installed HTML DB on 10g, but when I open up http://localhost:7777/pls/ htmldb/htmldb_admin and put in password (which works on sqlplus) it says ID... is wrong?
cheers,
Bernhard
P.S. I couldn't find the correct forum for HTML DB?
Edited by: boffman on 01.10.2008 22:17Hello,
HTMLDB got renamed to APEX.
You can upgrade your HTMLDB version to APEX fairly easily. You find the download here: http://www.oracle.com/technology/products/database/application_express/download.html
Installation instructions are included. You get so much more with the new version of APEX that I think it's really worth your time to do the upgrade.
About your login problem: can you try to login in the INTERNAL account with ADMIN? There's also a reset password available.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/ -
Please do not tell me to Buy a Mac computer. I all ready have 23 in my family and they are all at least 1200 miles from me now.
Try reinstalling iTunes. Or, if you already have iOS 5, you can update from the phone.
About the CPU Usage: if you have an old computer, and you're running the latest version of iTunes, the CPU will go up. -
Can't login to Admin Console after period not using
Hi,
We have portal 3.0P4 on Solaris 8 (gateway and server seperate systems) and have always the same problem.
After a time, not using the admin console, we're not allowed to login anymore.
We get the following message: Your Admininstration Console login session has timed out.
The auth log says: Login Failed Unix initialization LoginExceptionI/O exception trying to
connect to Unix service UserDomain /<domeinname>
Only after restarting the portal, it works fine again. This is not a solution with a production system!
Can someone help ...
Thanks in advance.
Greetings,
Miranda HeesbeenDId you try restarting just the Unix auth helper (doUnix) process instead of the whole ipsserver?
Sometimes even if the process is running it has a problem. -
Can not connect to Cerberus FTP Server with PASV
I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status: Resolving address of domain.com
Status: Connecting to ExternalIP:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS/SSL connection established, waiting for welcome message...
Response: 220-220-Welcome to Cerberus FTP Server
Response: 220 220 Created by Cerberus, LLC
Command: USER test
Response: 331 User test, password please
Command: PASS ***********
Response: 230 Password Ok, User logged in
Command: CLNT FileZilla
Response: 200 Command okay
Command: OPTS UTF8 ON
Response: 220 UTF8 support on
Command: PBSZ 0
Response: 200 PBSZ=0
Command: PROT P
Response: 200 PROT P OK, data channel will be secured
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is the current directory
Command: TYPE I
Response: 200 Type Binary
Command: PASV
Response: 227 Entering Passive Mode (external IP,195,83)
Command: MLSD
Error: Connection timed out
Error: Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.Dan,
Looking at the output,
Status: Resolving address of domain.com
Status: Connecting to ExternalIP:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike -
Servers not visible in admin console
Hello,
we have admin server and one managed server (soa_server1) up and running, but for some reason they are not visible in admin console Environment -> Servers. The list is empty...
Any idea why admin console cannot see these servers?
Can this be fixed any other way than recreating the domain?
As a consequence jdbc datasource cannot be created. Testing the database connection succeeds but after that setting the target cannot be done.
We have weblogic 10.3.3.
regards, MattiHello,
we rebooted the RedHat EL5 machine we have weblogic installed, after reboot Servers are visible as they should and datasource targeting for soa server succeeds.
In the same machine there's Oracle SOA Suite 11g in one domain (AdminServer, soa_server1), and Oracle Service Bus in another domain. It is a mystery why things did not work before reboot.
Thank you for the ideas how to debug and fix the problem.
regards, Matti -
11g node manager reachable but server does not start from admin console
I have a issue with node manager is reachable from admin console and from command prompt it is not connected and could not able to start the managed server.
If i change /config/nodemanager/nm_password.properties plain text and restart it is not reachable in admin console abut can connect from command prompt. I could not able to start the even with this scenario.
i see below error when try to check machine monitor tab.
<Error> <NodeManager> <BEA-300033> <Could not execute command "getVersion" on the node manager. Reason: "Access to domain 'dom_11gint' for user 'Ckr10ycOJN' denied".>
Ckr10ycOJN username in config.xml
node manager and managed servers are not root user process.
Please help me if have any suggestions.Pls. make sure the following points in your environment.
1) Check '*nodemanager.domains*' file in <<WL_HOME>>\commo\nodemanager directory
a) This file should have the entry for your domain 'dom_11gint'.
b) Ensure the path referred in the nodemanager.domains file is correct one.
2) Ensure the following remote server startup parameters are passed properly.
a) In the Admin Console, Navigate Servers --> <<SERVER_NAME>> -->Configuration --> Server Start
b) Pass the required Class Path, Arguments, User Name, Password(User name and Password to boot the managed servers) -
My application can not connect to FMS2
My application can not connect to FMS2
hi,all, Some things block me. Who can you help me? I
appreciate your support.
Server: FMS 2.0
Client : Flash 8 ,Flex 2.0.1
I find Flash 8 code is fine. It can connect to FMS2 with on
error. I can find connect show in FMS console.
But I find AS3 codes can not connect to FMS2. Why? I am very
puzzle...:-(
Error messages is nse.info.code:NetConnection.Connect.Failed
nse.info.level:error...help me please..Thank you very much.
My codes below.
==========Flash 8 code =========
stop();
// Open connection to FlashCom
client_nc = new NetConnection();
// Handle status message
client_nc.onStatus = function(info) {
trace("Level: " + info.level + newline + "Code: " +
info.code);
client_nc.connect("rtmp://127.0.0.1/tutorial_text");
// Initialize the typing stage
TypingStage.text = "";
// Create a remote shared object. client_nc.uri is the URI of
the
// NetConnection the shared object will use to connect to the
// server. I.e., the one just created.
text_so = SharedObject.getRemote("sharedtext", client_nc.uri,
false);
// The following is very important, nothing happens otherwise
text_so.connect(client_nc);
// Each time something changes in the shared object, the
server
// sends out a synchronization message. This onSync handler
// updates the movie based on the information.
text_so.onSync = function(list) {
// Update the textArea in the typing stage with the latest
// text from the shared object. The 'for' loop condition
searches
// through the list of changes, and the 'if' condition
ensures
// that we apply the relevant change only if someone other
than
// this client has changed the value.
for ( var i = 0; i < list.length; i++ )
if ( list.name == "textValue" && list.code !=
"success")
TypingStage.text = text_so.data.textValue;
break;
// Update the shared object every time the user types in new
text
TypingStage.onChanged = function()
text_so.data.textValue = TypingStage.text;
===============Flex2
代码如下====================
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creati>
<mx:Script>
<![CDATA[
import flash.net.*;
import mx.controls.Alert;
import flash.events.SyncEvent;
private var client_nc:NetConnection;
private var text_so:SharedObject;
public function init():void
flash.system.Security.allowDomain("
http://127.0.0.1");
rte.text = "";
public function ioEvent(ioe:IOErrorEvent):void
rte.text = rte.text+"/n"+" io:"+ioe.text;
public function connectStatus(nse:NetStatusEvent):void
//trace("Level: " + nse.info);
rte.text = rte.text+"/n"+" nse.info.code:"+nse.info.code+"
nse.info.level:"+nse.info.level;
public function click():void
client_nc = new NetConnection();
client_nc.addEventListener(NetStatusEvent.NET_STATUS
,connectStatus);
client_nc.addEventListener(IOErrorEvent.IO_ERROR,ioEvent);
rte.text = "connect rtmp://127.0.0.1/tutorial_text ";
client_nc.connect("rtmp://127.0.0.1/tutorial_text");
///tutorial_text
text_so = SharedObject.getRemote("sharedtext",
client_nc.uri, false);
text_so.addEventListener(SyncEvent.SYNC,syncShareObject);
text_so.connect(client_nc);
public function syncShareObject(se:SyncEvent ):void
var list:Array = se.changeList;
var i:int;
for (i = 0; i < list.length; i++ ){
if ( list.name == "textValue" && list.code !=
"success"){
rte.text = text_so.data.textValue;
break;
public function changeRTE():void
text_so.data.textValue = rte.text;
public function disconnect():void{
if (client_nc.connected){
client_nc.close();
]]>
</mx:Script>
<mx:RichTextEditor id="rte" x="23" y="19" width="626"
height="337" cornerRadius="20" change="changeRTE()">
</mx:RichTextEditor>
<mx:Button x="105" y="381" label="Start Connection"
width="204" click="click()"/>
<mx:Button x="317" y="381" label="Disconnect" width="209"
click="disconnect()"/>
</mx:Application>Action Script uses AMF3 format to communicate. However, Flash
Media Server 2 only understands the AMF0 format.....
Do the following:
var client_nc:NetConnection = new NetConnection();
client_nc.objectEncoding = flash.net.ObjectEncoding.AMF0;
client_nc.connect("rtmp:/FLEX");
This should connect .... however, you might run into other
issues like me... I am having issues with NetStream after that ...
however, let me know if this works ... -
Can not connect computer to Cisco Connect -EA3500
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
Reading the manual it says the username is blank, password 'admin'.
-
New member of ora_dba group on server can not connect as sysdba.
We have added a new dba to our staff and have made him a member of the local group Ora_dba on the server (9i windows). He can not connect as sysdba but a long-time dba can.
SQL> connect / @s1 as sysdba
ORA-01031: insufficient privileges
I know this is a very old Oracle challenge so I am sure someone can give us some guidance!
Thanks1) Examine the contents of the file located at:
$ORACLE_HOME/rdbms/lib/config.c
This file lists the operating-system groups that have administrative access, notably the one listed in the line containing "SS_DBA_GROUP". Is t
he UNIX account you are using to connect / as sysdba a member of this OS group?
2) Examine the contents of the file located at:
$ORACLE_HOME/network/admin/sqlnet.ora
Within this file, the line containing the string "SQLNET.AUTHENTICATION_SERVICES" should either be commented out, or be set to SQLNET.AUTHENTICATION_SERVICES = (BEQ,NONE)
3) Check the value of $ORACLE_SID for the UNIX account(s) connecting / as sysdba to ensure it is correct. -
WPA Can Not Connect???
Where I work we have a linksys wifi 54G system. When I try to connect it will show the network name and ask for the WPA password. The problem is when I put in the password it says it can not connect. I also tried an alpa-numeric key that I was given for the network with the same result. We don't have any kind of IT person just a router that someone brought in. I did get the key and password conformed with others that have no problem with there PC's to connect. They did say though that they were asked to put both in when they connect which does not happen for me. I tried to change the type of security to connect with but the drop down menu does not let me do this. I was hoping to get into the router settings to see if there was something I could change with out luck because of a password on that as well. The person who supplied the router is never around just a part timer so it is not easy to get him to find out anything else with the system. Oh and it shouldn't be any kind of signal issue since the router is set up 10ft away from me with out anything in the line of sight.
your linksys should have the user login and password written under the modem, somewhere near serial number.
if you type in the address on your browser: http://192.168.1.1 (for instance), it will give you login windows.
Just type 192.168.1.1 on user and the password (Password or Admin), it should give you the access unless the guy changed the password.
Once you get inside, you can go to wireless setting and see the actuall password in there.
Even if the guy changed the password, you still can reset that by use a pointy device and push to the reset button next to the power adapter hole.
Sometime you don't need to mess up with your lynksys, just type ssid or connection name correctly and type the "hex" or "alpha numeric".
Some user said thay put $ infront of the sequence number and they connect just fine after that.
Good Luck. -
10GR2: API5022:can not connect to the specified repository.
Hi
Today I have started getting the following message when try to connect to the Design Center in 10GR2:
'API5022:can not connect to the specified repository. Verify connection information'
Nothing has changed in the repository for several days, though we were able to login to the Design Center yesterday without any issue. This is happening for all users, so is not a client problem.
Also, we can login to the repository via repository browser, administrator and various query tools. Therefore, the connection details are ok.
Has anyone else encountered this in 10.2? If so, any suggestions would be very much appreciated...
Thanks
GBThe problem might be caused by changing the LOCALE setting to a value that is not recognized.
The selection in the preferences does not allow to reset to an empty value, nor does OWB allow to cancel the selection.
This setting is stored locally outside any database at the following location:
C:\oracle\OWB102\owb\bin\admin\Preference.properties.
where the first part is the OWB homedir
After I changed the content into the following, I was able to start OWB and connect to the repository again without any errors:
#Locally Cached Preferences - DO NOT MODIFY
#Wed Apr 25 21:14:29 CEST 2007
LOCALE=en_US
Even though it says not to modify, remember that the only alternative would be re-installing OWB.
Hope this works for anyone having this problem.
Regards,
Patrick. -
lately, i do not know why my imac can not connect to the app store ... i followed the instructions in "http://support.apple.com/kb/TS5202" except the Edit your Keychain ... there is NO blue + over any certificates icon ... i still can not connect to the app store...
i could have the app store display the front page after doing all instructions according to the web page ... when i click the login button try to log in and it display the empty page with "Can Not Connect To App Store"...
i have tried few times with same result...
any help to resolve this issue...
cheers,Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
FCN Document not created for SO : Message SY499-Urgent
While Saving delivery or doing PGI or while processing billing document i am getting below info message. "FCN Document not created for SO " Message SY499. I dont know why this message started coming now. I have added my country in VI49 settings. I wo
-
Setting Up VLAN and QoS for VOIP on SG200-18
We recently purchased the SG200-18 smart switch to replace a Netgear unmanaged switch. We're moving our phone service to VOIP through our local ISP as well. I've currently got the VOIP phone plugged into Port 17 on the SG200-18 (it's a Grandstream c
-
Reg errors in webdynpro runtime
hi every im new to this webdynrpo n this is my first post my problem when im tying to run the Code Samples in SDN and some Weblogs n SDN Best Practices im getting the following errors. So please guide me what steps to be taken to run the following a
-
Formatting a date like: Friday 24th January
Formatting a date like: Friday 24th January Is there any way using the Java API to get the 'th' or 'st' bits on the numbers. I can't see it in java.text.SimpleDateFormat Thanks.
-
Mac OS 10.3.9, PSE 4.0 I have just spent three hours with the PSE Help learning about layers and fills and while I've come a long way, I still cannot figure out how I create a custom-colored and custom-shaped gradient layer. I have to use a regular l