Can not deploy Federation Manager 7.0 (http 500 error)

Hi,
I am trying to install Sun Java System Federation Manager 7.0 on SunOS 5.8 sparc machine, and never get any further after build the federation.war file
Basically, I use standard script to build the war file
./fmsetup install -s fmsilence-template
and install the Sun web server 6.1 with standard installation.
If I then deploy the federation.war file , I will get following error message.
[31/May/2006:14:12:19] info (13892): CORE3276: Installing a new configuration
[31/May/2006:14:12:19] info (13892): WEB0100: Loading web module in virtual server [https-miranda.niss.ac.uk] at [federation]
[31/May/2006:14:12:19] warning (13892): WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[31/May/2006:14:12:19] info (13892): WEB0100: Loading web module in virtual server [https-miranda.niss.ac.uk] at [search]
[31/May/2006:14:12:51] failure (13892): WebModule[federation]: WEB2783: Servlet /federation threw load() exception
javax.servlet.ServletException: WEB2778: Servlet.init() for servlet LoginLogoutMapping threw exception
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:949)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
----- Root Cause -----
java.lang.NullPointerException
at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:72)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[31/May/2006:14:12:51] info (13892): CORE3280: A new configuration was successfully installed
[31/May/2006:14:12:51] info (13892): WEB4202: Closing web application environment for virtual server [https-miranda.niss.ac.uk]
And if I try to access the federation manager console http://host:port/deployment-URI/UL/Login
I will get HTTP 500 Internal server error
Any one know how to solve the problem?
Thanks in advance

I'm getting the same thing. And I do have AM installed and working on the same machine.
Anyone have any ideas?

Similar Messages

Can not deploy: NoClassDefFoundError

Hi,
i want to create a new folder in KM-Content of my Portal. Therefor i have write the following piece of code and import the libraries below. My problem is that i can not deploy my Application.
I get the error message: Caused by: java.lang.NoClassDefFoundError: com/sapportals/wcm/repository/IResourceContext
I have read that i have to add a Sharing reference to "knowledgemanagement" in the portaapp.xml file.
But i use a Java Bean/Web Service (EJB) with a Application (EAR), so i have nothing with <b>dist/PORTAL-INF</b>.
What can i do? How can i deploy my application and solve the problem?
import bc.rf.framework_api.jar
import bc.util.public_api.jar
import com.sap.portal.usermanagement.admin_api.jar
import com.sap.portal.usermanagementapi.jar
import com.sap.security.api.ep5.jar
             try {
                  com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getServiceUserFactory().getServiceUser("cmadmin_service");
               ResourceContext ctxt = new ResourceContext(user);
               IResourceContext rContext = new ResourceContext(user);
               IResourceFactory resourceFactory = ResourceFactory.getInstance();
               RID aRid = RID.getRID("/documents/Test");
               ICollection aCollection =
                    (ICollection) resourceFactory.getResource(aRid, rContext);
               if (aCollection != null) {
                    IResource resource =
                         aCollection.createResource("myFolder", null, null);
          } catch (Exception ex) {
               ex.printStackTrace();
regards,
Sharam

Hi Sharam,
Make sure that you have your sharing reference set properly in the portalapp.xml file. Open portalapp.xml and click on the Application tab. This is what I like to have mine set to:
SharingReference=usermanagement,knowledgemanagement,landscape,htmlb,exportalJCOclient,exportal
Save your changes and the recompile/deploy.
Hope this helps!
-StephenS

URGENT -1 from DCM Command on OBE deploy === can not deploy/

Attempting to complete the OBE "Deploying J2EE and ADF Applications
http://www.oracle.com/technology/obe/obe9051jdev/deployToAppServer/lesson_Deployment.htm
in order to prove to upper management that it is "easy" to develop on JDEV 9.0.5 build 1618 and deploy to Oc4j 9.0.4
Compiles clean
Runs like a champ on the embedded oc4j
When i try to deploy the J2EE Application to oracle 9.0.4 getting a -1 from Oc4jDcmServlet <#### Deployment incomplete. #### >
< see attached >
when i look at the 9.0.4 Instance's XML log i get:
java.lang.Exception: can not deploy/undeploy to a disabled component: home
<see attached >
i have checked the home component. there is no way to enable / disable it just have start and stop and it is in the start state.
please help.
JDEV log
Invoking DCM servlet client...
C:\Java\j2sdk1.4.2_06\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Jdeveloper\jdev\lib\oc4j_remote_deploy.jar http://jstoll-xp-lt:1810/Oc4jDcmServletAPI/ ias_admin **** redeploy C:\Ora10G.9.0.4\InfraEngine C:\Jdeveloper\jdev\mywork\deploySamples\deployment_j2ee\View\deploy\application1.ear hr
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy C:\Ora10G.9.0.4\InfraEngine C:\Jdeveloper\jdev\mywork\deploySamples\deployment_j2ee\View\deploy\application1.ear hr UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = 0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-1)
#### HTTP return code was -1
Exit status of DCM servlet client: -1
Elapsed time for deployment: 48 seconds
#### Deployment incomplete. #### Oct 31, 2005 3:15:43 PM
log.xml
Log Entry: October 31, 2005 3:15:38 PM EST
Component DCM
Message Type Error
Module ID oracle/defaultLogger/ExceptionLogger
User ID SYSTEM
Host Name jstoll-xp-lt
Host Network Address 10.10.10.10
Process/Thread ID null-Thread[Deamon Worker for TaskMaster of iAS instance at: C:\Ora10G.9.0.4\InfraEngine JVM Id = 763f5d.107482d4e1c.-8000,5,main]
Message Level 1
Execution Context ID 10.10.10.10:57042:1130789725003:0
Message Text
Remote Execute failed:
Supplemental Text
java.lang.Exception: can not deploy/undeploy to a disabled component: home
at oracle.ias.sysmgmt.task.TaskMaster.internal_evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.RemoteEvaluate.execCommand(Unknown Source)
at oracle.ias.sysmgmt.task.DaemonWorker.run(Unknown Source)

DCM command did not complete successfully (-1)
DCM command did not complete successfully (-1)

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

Can not login access manager

mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!

javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND.

Can not start Enterprise Manager web page

I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Don

diego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config"

Can not deploy a report using JDBC connection on CR2008 Server

Hi Group,
I have a report created with JDBC connection. When I tried to add it to CR2008 server, it gives an error - "An unexpected error has occurred ". Basically I want to add a report to a public folder via CMC. I am using adminstrator account.
Then I thought I need to add JDBC driver into CR2008 server. so I put oracle jdbc jar into CR2008 server classpath and add JDBC connection info into CRConfig.xml. but I still got the same error.
I also tried:
- Change the report to use native Oracle driver rather than JDBC. The deployment succeeded (but this is not what I want)
- Add a data source connection via Business View Manager, but no luck.
I know how to use/change jdbc connection with programtic way, but I just want to know if I want to use built-in components in CR2008 server without any coding the reports can be deployed and managed.
Thanks in advance.
Dennis

Hello Will,
Crystal Reports supports connections to JDBC/JNDI out of the box, and have done so for a while, whether stand-alone or published to Enterprise.
To specify where the server would search for the JDBC driver jar files, you'd change the classpath tag found in the CRConfig.xml file found on the machine where the Crystal Reports Page or Job Server is running.
For early Crystal Enterprise 10 and before, it used Java Native Interface (JNI) to start the Java process to retrieve the data from the JDBC connection.
For later Crystal Enterprise 10 and later, it starts off a "Java Server" process, and communicates to the Crystal Reports process via CORBA TCP/IP connection.
Commonissues that may arise: (1) CRConfig.xml not configured properly, (2) unable to start or communicate to the "Java Server" because of permissions or firewall.
Note that this is a separate connectivity map from using ADO or ADO.NET.
Sincerely,
Ted Ueda

I can go to every other website except for facebook even if i use other browsers all i can see is 404 Not found or HTTP 500 Error since yesterday I tried reinstalling clearing history and cookies enabling them make sure that my firewall permits me to acce

I can go to every other website except for facebook. I try every other browser in my computer but the only thing I can see is HTTP 500 error and 404 Not Found. I tried clearing cache history and cookies, enabling cookies, checking my modem, make sure my firewall permits me to access this web and even pt 's' in front of 'http' but it still dosent work. I can go to facebook with my dad's laptop and my handphone but not with this computer, why?
== URL of affected sites ==
http://www.facebook.com

Problem Resolved!
          I found out that I had 'http' instead of 'httpd' in the statement where I
          registered my servlet, SqlServlet.
          Now, I am having difficulty with hot deployment. The server is returning
          error 404.

JMStudio Error "Can not create session manager"

Hi,
I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
thanks in advance

Um,maybe the port that you use for transmission is already occupied.
Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port.

Can not locate Workgroup Manager; possibly not installed?

Here's the story:
I'm trying to get my new camera software installed and one of the steps is to launch Image capture.
Image capture gives me an error saying: "No Image Capture Device connected."
Apple says to fix this I need to open Workgroup Manager (in /Applications/Server/) and change some preferences.
But, I can not find Workgroup Manager for the life of me. I used spotlight with no luck. I also don't have a folder in Applications titled Server. This worries me and makes me wonder if the program could have been deleted or not installed at all?
Any suggestions on how to find WgM would be welcome.

Whoa... somebody got confused someplace... I wouldn't guess you are running OSX Server on a MacBook, but the oSX CXlient instead, so no idea how Apple came up wih that solution.
You likely should not have a Server folder there, nor the APP they speak of.
What kind of Camera exactly, and how does it connect?

SOAP to proxy scenarion error An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP

Hi all
My scenario is soap to proxy scenario .while testing using soap to proxy i am getting " An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP: in sxmb_moni sap pi .
Some times this interface is failing and some time its successfully processing.
While testing with successful xml data also i am getting the same error in sxmb_moni.
I modified the proxy inbound code where passing error message and still i am getting the same message.
Please suggestion the same for error solving.
Regards
Ravi.

Hi,
I'm facing the same problem.
I wrote an very easy report. It works as intended, but when i set fillable='X' i get the error FPRUNX 001.
FP_GET_LAST_ADS_TRACE return following:
Begin operation:
Render, elapsed time = 16 ms.
#   End operation: Render, elapsed time = 89 ms.
#   Begin operation: UsageRights, elapsed time = 89 ms.
#   End operation: UsageRights, elapsed time = 97 ms.#
...and the error string of FP_GET_LAST_ADS_ERRSTR is:
ADS: Request start time: Wed Jul 01 14:44:26 CEST 2009(200.101).
Any idea what the problem might be?

Weblogic rdms persistence 5.1.0 can not deploy

hi this is rb
we have the wl5.1 in nt and i am in Defcon 1 since i can not deploy
with the deployerTool an entyty in this moment. The entity is ok,
the fields of the data base are equals to the fields of the ejb,
but i have this error:
Persistence type WebLogic RDBMS Persistence 5.1.0 could not be
initialized. Please report this problem to the vendor.
Could not setup PersistenceType for bean 'null'.
Error occurred while processing persistence type 'WebLogic RDBMS
Persistence'.
Due to the following underlying exceptions:
sessionData
Could anybody help me?
thanks for advance.

just now,I exam the OS firewall,i find it up.after I stop it via "service iptables stop"command,the console can access now!
[root@dldzfp2 ~]# service iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
Chain RH-Firewall-1-INPUT (2 references)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 255
3 ACCEPT esp -- 0.0.0.0/0 0.0.0.0/0
4 ACCEPT ah -- 0.0.0.0/0 0.0.0.0/0
5 ACCEPT udp -- 0.0.0.0/0 224.0.0.251 udp dpt:5353
6 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:631
7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:631
8 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
9 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
10 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
[root@dldzfp2 ~]# service iptables stop
Flushing firewall rules: [ OK ]
Setting chains to policy ACCEPT: filter [ OK ]
Unloading iptables modules: [ OK ]

HT2731 Can not open Itunes on my computer,i get error msg MSVCR80.dill is missing from your computer . What do i do?

Can not open itunes on my computer,I get error msg MSVCR80.dill is missing from your machine. What do I do?

Work through the user tip: https://discussions.apple.com/docs/DOC-6562

I recently restored my computer and now I can not sync my ipod to my computer - the error says "my ipod is synced with anothers itunes libary"

I can not sync my ipod to my computer - the error message says " my ipod is synced with another itnes libary"

Re-installing the OS on your PC has caused your iPod to think it is now syncing with a new/different iTunes library. An iPod can only be synced with one computer/iTunes library at a time. If you try to sync the iPod with a different/new iTunes library it will erase the contents the iPod and replace them with what is in the new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I can not download Adobe reader. I am getting error message 1936. Can you help?

I can not download Adobe reader. I am getting error 1936. Can you help?

What is your operating system? Is there anything else beside the number 1936?

Can not deploy Federation Manager 7.0 (http 500 error)

Similar Messages

Maybe you are looking for