Can not export data from form tracker
Hi there,
I have set up a lovely form for collecting data. It all comes into the Adobe Tracker and the Responses file fine.
What i wish to do is export data from the responses file into another format. I should be able to do it from the Export button on the left but it is 'blanked out' and does nothing if I push it. I can't find any details on here or the internet relating to this. And yes, there is data in the file to export .
Hoping you can help.
Many thanks in advance.
I have the same problem but... I created two forms for two separate purposes and have had responses to both.
One of them allows me to export the data and the other does not.
Does anyone out there have an answer for this seemingly random anomoly?
Regards
Sydman
Similar Messages
-
've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?
iPhones require a SIM for activation.
Put the device in DFU mode (google it) and restore via iTunes. -
I can not synchronize data from the prelude livelog
I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
The Prelude can not apply metadata in it.
please can someone help meHi -
When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
Michael -
when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problemIf it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem. -
can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.
Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it. -
Export data from forms to excel
HI
In my application im trying to export data from forms to excel.Everything works fine.First of all im using get_file_name for selecttion of file and passing it to ole2 package as follows
FILENAME := GET_FILE_NAME(File_Filter=> 'XLS Files (*.xls)|*.xls|',dialog_type=>SAVE_FILE);
ARGS:=OLE2.CREATE_ARGLIST;
oLE2.ADD_ARG(ARGS,Filename);
OLE2.INVOKE(WORKSHEET,'SAVEAS',ARGS);
The problem is if i select an existing file the get_file_name itself raises one message ".....file already exists Replace an existing file?"
Similarly the excel also also raises the same message "".....file already exists Replace an existing file?".I want to suppress atleast one of them? Could anyone help for this problem?
appreciate ur help
THANKSLooks like...
ole2.set_property( ex_app, 'DisplayAlerts', false );
where "ex_app" variable Excel Application -
ex_app:= ole2.create_obj('Excel.Application');
and more Question:
When i close excel app - in process viewer i see "excel.exe"
ole2.release_obj don't work :( -
Can not change date from 2011 to 2012 in Elements 9 photoshop
can not change dates from 2011 to 2012 in Elements 9 photoshop
Thanks for the help. That was exactly the fix I needed. With the expense of the photoshop software you'd think the company would fix stuff like this via updates. Merry Christmas.
-
Unable to Export data from Forms in 11.5.10.2
Hi All,
When I am trying to export data from a Form, the output is not appearing on my desktop to save or view for further processing. When I click on File-->Export link, a screen appears for a fraction of second and then disappears automatically.
And it is generating the below error file in my desktop.
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x006e0065, pid=4988, tid=3864
# JRE version: 6.0_29-b11
# Java VM: Java HotSpot(TM) Client VM (20.4-b02 mixed mode, sharing windows-x86 )
# Problematic frame:
# C 0x006e0065
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x033a1c00): JavaThread "AWT-Windows" daemon [_thread_in_native, id=3864, stack(0x00960000,0x00a60000)]
siginfo: ExceptionCode=0xc0000005, reading address 0x006e0065
Registers:
EAX=0x070bf4d0, EBX=0x00000001, ECX=0x034a7a30, EDX=0x00000004
ESP=0x00a5fae0, EBP=0x00a5fb0c, ESI=0x033a1d28, EDI=0x034a7a30
EIP=0x006e0065, EFLAGS=0x00010293
Top of Stack: (sp=0x00a5fae0)
0x00a5fae0: 6d09ccc0 00a5fb74 6d09c780 00000000
0x00a5faf0: 00000000 00000001 033a1d28 00a5fae4
0x00a5fb00: 00a5fb90 6d0c0628 00000001 00a5fb38
0x00a5fb10: 7e418734 001002d0 0000981a 034a7a30
0x00a5fb20: 00000000 6d09c780 dcbaabcd 00000000
0x00a5fb30: 00a5fb74 6d09c780 00a5fba0 7e418816
0x00a5fb40: 6d09c780 001002d0 0000981a 034a7a30
0x00a5fb50: 00000000 00a5fc34 00a5fc2c 005de248
Instructions: (pc=0x006e0065)
0x006e0045:
[error occurred during error reporting (printing registers, top of stack, instructions near pc), id 0xc0000005]
Register to memory mapping:
EAX=0x070bf4d0 is an unknown value
EBX=0x00000001 is an unknown value
ECX=0x034a7a30 is an unknown value
EDX=0x00000004 is an unknown value
ESP=0x00a5fae0 is pointing into the stack for thread: 0x033a1c00
EBP=0x00a5fb0c is pointing into the stack for thread: 0x033a1c00
ESI=0x033a1d28 is an unknown value
EDI=0x034a7a30 is an unknown value
Stack: [0x00960000,0x00a60000], sp=0x00a5fae0, free space=1022k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C 0x006e0065
C [USER32.dll+0x8734] GetDC+0x6d
C [USER32.dll+0x8816] GetDC+0x14f
C [USER32.dll+0x89cd] GetWindowLongW+0x127
C [USER32.dll+0x8a10] DispatchMessageW+0xf
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.awt.windows.WToolkit.eventLoop()V+0
j sun.awt.windows.WToolkit.run()V+52
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x07294400 JavaThread "SysExecutionThead" daemon [_thread_blocked, id=328, stack(0x04830000,0x04880000)]
0x0351e400 JavaThread "AWT-EventQueue-3" [_thread_blocked, id=4484, stack(0x046f0000,0x04740000)]
0x06f3a400 JavaThread "Flush Queue" [_thread_blocked, id=5560, stack(0x0a530000,0x0a580000)]
0x073b5400 JavaThread "Thread-20" [_thread_in_native, id=3872, stack(0x09f40000,0x09f90000)]
0x06dc1400 JavaThread "CursorIdler" [_thread_blocked, id=2808, stack(0x09ef0000,0x09f40000)]
0x07079c00 JavaThread "TaskScheduler timer" [_thread_blocked, id=2824, stack(0x09ea0000,0x09ef0000)]
0x070bc400 JavaThread "Keep-Alive-Timer" daemon [_thread_blocked, id=5280, stack(0x045b0000,0x04600000)]
0x07607400 JavaThread "Busy indicator" daemon [_thread_blocked, id=4924, stack(0x09e50000,0x09ea0000)]
0x034f7c00 JavaThread "Forms-StreamMessageReader" [_thread_blocked, id=3856, stack(0x07960000,0x079b0000)]
0x06d18400 JavaThread "thread applet-oracle.forms.engine.Main-3" [_thread_in_native, id=640, stack(0x07910000,0x07960000)]
0x02ceb400 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=1568, stack(0x04880000,0x048d0000)]
0x034e2c00 JavaThread "thread applet-oracle/apps/fnd/formsClient/FormsLauncher.class-2" [_thread_blocked, id=5788, stack(0x04790000,0x047e0000)]
0x033dac00 JavaThread "Applet 4 LiveConnect Worker Thread" [_thread_blocked, id=4080, stack(0x047e0000,0x04830000)]
0x034d8000 JavaThread "Thread-14" [_thread_in_native, id=5068, stack(0x04740000,0x04790000)]
0x034da000 JavaThread "LPR" [_thread_blocked, id=2720, stack(0x046a0000,0x046f0000)]
0x034dd400 JavaThread "Thread-12" [_thread_blocked, id=5720, stack(0x044e0000,0x04530000)]
0x0345e400 JavaThread "AWT-EventQueue-1" [_thread_blocked, id=4848, stack(0x04650000,0x046a0000)]
0x0345d400 JavaThread "TimerQueue" daemon [_thread_blocked, id=4800, stack(0x04600000,0x04650000)]
0x03413800 JavaThread "thread applet-unitask.localPrint.clientAppletLauncher-1" [_thread_blocked, id=3184, stack(0x043f0000,0x04440000)]
0x033ea000 JavaThread "JVM[id=0]-Heartbeat" daemon [_thread_blocked, id=5900, stack(0x04490000,0x044e0000)]
0x033e6c00 JavaThread "AWT-EventQueue-2" [_thread_blocked, id=3036, stack(0x04440000,0x04490000)]
0x033e4c00 JavaThread "Applet 3 LiveConnect Worker Thread" [_thread_blocked, id=5652, stack(0x03790000,0x037e0000)]
0x033dd800 JavaThread "Browser Side Object Cleanup Thread" [_thread_blocked, id=1008, stack(0x043a0000,0x043f0000)]
0x033d7000 JavaThread "Windows Tray Icon Thread" [_thread_in_native, id=4576, stack(0x03920000,0x03970000)]
0x033d5000 JavaThread "CacheCleanUpThread" daemon [_thread_blocked, id=4136, stack(0x038d0000,0x03920000)]
0x033ae400 JavaThread "CacheMemoryCleanUpThread" daemon [_thread_blocked, id=3632, stack(0x03880000,0x038d0000)]
0x033a8400 JavaThread "SysExecutionTheadCreator" daemon [_thread_blocked, id=4468, stack(0x03330000,0x03380000)]
0x033a5c00 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=4164, stack(0x037e0000,0x03830000)]
=>0x033a1c00 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3864, stack(0x00960000,0x00a60000)]
0x033a0400 JavaThread "AWT-Shutdown" [_thread_blocked, id=2668, stack(0x03640000,0x03690000)]
0x0339f000 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=2840, stack(0x035f0000,0x03640000)]
0x02d84800 JavaThread "Java Plug-In Pipe Worker Thread (Client-Side)" daemon [_thread_in_native, id=5160, stack(0x035a0000,0x035f0000)]
0x02da6000 JavaThread "Timer-0" [_thread_blocked, id=3064, stack(0x032e0000,0x03330000)]
0x02d4d400 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=4168, stack(0x031e0000,0x03230000)]
0x02d39000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=1560, stack(0x02fb0000,0x03000000)]
0x02d34000 JavaThread "C1 CompilerThread0" daemon [_thread_blocked, id=6076, stack(0x02f60000,0x02fb0000)]
0x02d31800 JavaThread "Attach Listener" daemon [_thread_blocked, id=5804, stack(0x02f10000,0x02f60000)]
0x02d30400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1996, stack(0x02ec0000,0x02f10000)]
0x02d29800 JavaThread "Finalizer" daemon [_thread_blocked, id=3760, stack(0x02e70000,0x02ec0000)]
0x02d28000 JavaThread "Reference Handler" daemon [_thread_blocked, id=2708, stack(0x02e20000,0x02e70000)]
0x00888000 JavaThread "main" [_thread_blocked, id=4944, stack(0x00910000,0x00960000)]
Other Threads:
0x02cec000 VMThread [stack: 0x02dd0000,0x02e20000] [id=3156]
0x02d44000 WatcherThread [stack: 0x03000000,0x03050000] [id=5780]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 10048K, used 3925K [0x22990000, 0x23470000, 0x27ee0000)
eden space 8960K, 43% used [0x22990000, 0x22d654f8, 0x23250000)
from space 1088K, 0% used [0x23250000, 0x23250000, 0x23360000)
to space 1088K, 0% used [0x23360000, 0x23360000, 0x23470000)
tenured generation total 21996K, used 13195K [0x27ee0000, 0x2945b000, 0x32990000)
the space 21996K, 59% used [0x27ee0000, 0x28bc2d50, 0x28bc2e00, 0x2945b000)
compacting perm gen total 12288K, used 9062K [0x32990000, 0x33590000, 0x36990000)
the space 12288K, 73% used [0x32990000, 0x332699b0, 0x33269a00, 0x33590000)
ro space 10240K, 51% used [0x36990000, 0x36ebd0b8, 0x36ebd200, 0x37390000)
rw space 12288K, 54% used [0x37390000, 0x37a29570, 0x37a29600, 0x37f90000)
Code Cache [0x00af0000, 0x00d50000, 0x02af0000)
total_blobs=1512 nmethods=1280 adapters=167 free_code_cache=31064896 largest_free_block=320
Dynamic libraries:
0x00400000 - 0x00424000 C:\Program Files\Java\jre6\bin\java.exe
0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f03000 C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll
0x5cb70000 - 0x5cb96000 C:\WINDOWS\system32\ShimEng.dll
0x71590000 - 0x71609000 C:\WINDOWS\AppPatch\AcLayers.DLL
0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll
0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\SHELL32.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll
0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
0x774e0000 - 0x7761e000 C:\WINDOWS\system32\ole32.dll
0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll
0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL
0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.6028_x-ww_61e65202\comctl32.dll
0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll
0x6d7f0000 - 0x6da9f000 C:\Program Files\Java\jre6\bin\client\jvm.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x6d7a0000 - 0x6d7ac000 C:\Program Files\Java\jre6\bin\verify.dll
0x6d320000 - 0x6d33f000 C:\Program Files\Java\jre6\bin\java.dll
0x6d000000 - 0x6d14c000 C:\Program Files\Java\jre6\bin\awt.dll
0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll
0x4fdd0000 - 0x4ff76000 C:\WINDOWS\system32\d3d9.dll
0x00ae0000 - 0x00ae6000 C:\WINDOWS\system32\d3d8thk.dll
0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll
0x6d7e0000 - 0x6d7ef000 C:\Program Files\Java\jre6\bin\zip.dll
0x6d420000 - 0x6d426000 C:\Program Files\Java\jre6\bin\jp2native.dll
0x6d1d0000 - 0x6d1e3000 C:\Program Files\Java\jre6\bin\deploy.dll
0x77a80000 - 0x77b15000 C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000 C:\WINDOWS\system32\MSASN1.dll
0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.dll
0x3d930000 - 0x3da16000 C:\WINDOWS\system32\WININET.dll
0x03050000 - 0x03059000 C:\WINDOWS\system32\Normaliz.dll
0x78130000 - 0x78263000 C:\WINDOWS\system32\urlmon.dll
0x3dfd0000 - 0x3e1bb000 C:\WINDOWS\system32\iertutil.dll
0x6d6a0000 - 0x6d6e6000 C:\Program Files\Java\jre6\bin\regutils.dll
0x6d600000 - 0x6d613000 C:\Program Files\Java\jre6\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x6d620000 - 0x6d629000 C:\Program Files\Java\jre6\bin\nio.dll
0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll
0x77b40000 - 0x77b62000 C:\WINDOWS\system32\apphelp.dll
0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime
0x6d230000 - 0x6d27f000 C:\Program Files\Java\jre6\bin\fontmanager.dll
0x6d780000 - 0x6d788000 C:\Program Files\Java\jre6\bin\sunmscapi.dll
0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll
0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76d60000 - 0x76d79000 C:\WINDOWS\system32\iphlpapi.dll
0x76d40000 - 0x76d58000 C:\WINDOWS\system32\MPRAPI.dll
0x77cc0000 - 0x77cf2000 C:\WINDOWS\system32\ACTIVEDS.dll
0x76e10000 - 0x76e35000 C:\WINDOWS\system32\adsldpc.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76b20000 - 0x76b31000 C:\WINDOWS\system32\ATL.DLL
0x76e80000 - 0x76e8e000 C:\WINDOWS\system32\rtutils.dll
0x71bf0000 - 0x71c03000 C:\WINDOWS\system32\SAMLIB.dll
0x77920000 - 0x77a13000 C:\WINDOWS\system32\SETUPAPI.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x662b0000 - 0x66308000 C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000 C:\WINDOWS\System32\wshtcpip.dll
0x6d1a0000 - 0x6d1c3000 C:\Program Files\Java\jre6\bin\dcpr.dll
0x605d0000 - 0x605d9000 C:\WINDOWS\system32\mslbui.dll
0x49460000 - 0x4986b000 C:\PROGRA~1\MICROS~2\Office14\GROOVEEX.DLL
0x78520000 - 0x785c3000 C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_d495ac4e\MSVCR90.dll
0x78480000 - 0x7850e000 C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_d495ac4e\MSVCP90.dll
0x78e20000 - 0x78e4b000 C:\WINDOWS\WinSxS\x86_Microsoft.VC90.ATL_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_353599c2\ATL90.DLL
0x74980000 - 0x74aa3000 C:\WINDOWS\system32\msxml3.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
VM Arguments:
jvm_args: -D__jvm_launched=6364512386 -Xbootclasspath/a:C:\PROGRA~1\Java\jre6\lib\deploy.jar;C:\PROGRA~1\Java\jre6\lib\javaws.jar;C:\PROGRA~1\Java\jre6\lib\plugin.jar -Dsun.awt.warmup=true
java_command: sun.plugin2.main.client.PluginMain write_pipe_name=jpi2_pid2020_pipe7,read_pipe_name=jpi2_pid2020_pipe6
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=C:\Program Files\PC Connectivity Solution\;C:\Program Files\CA\SharedComponents\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\Core-Static;C:\PROGRA~1\CA\SHARED~1\CAM\bin;C:\Program Files\CA\Unicenter DSM\bin;C:\Program Files\Windows Imaging\;C:\Program Files\Intel\DMIX
USERNAME=aggarwalam
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 4 (4 cores per cpu, 1 threads per core) family 6 model 23 stepping 10, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1
Memory: 4k page, physical 3665072k(2703832k free), swap 5592752k(4834108k free)
vm_info: Java HotSpot(TM) Client VM (20.4-b02) for windows-x86 JRE (1.6.0_29-b11), built on Oct 3 2011 01:01:08 by "java_re" with MS VC++ 7.1 (VS2003)
time: Mon Jul 02 09:18:26 2012
elapsed time: 108 seconds
Can anyone please help me on this.
Thanks in advance.
Regards,
Charls K VWhen I am trying to export data from a Form, the output is not appearing on my desktop to save or view for further processing. When I click on File-->Export link, a screen appears for a fraction of second and then disappears automatically.Please add the application URL to the trusted sites list from the browser.
Also, make sure all pop-up blockers are disabled.
And it is generating the below error file in my desktop.Is this the same error you get in the Jinitiator/JRE console window? -- How to enable tracing and logging for Sun JRE (Native Plug-in) [ID 549423.1]
Please make sure no errors are reported in the database file log.
Also, please see these docs/links.
Troubleshooting Export and Attachment issues in Oracle Applications 11i [ID 338651.1]
How to Troubleshoot Forms Hanging Using Export Functionality [ID 423261.1]
Attachments and Exports, a Troubleshooting Guide [ID 135444.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Export+AND+Troubleshooting&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Export+AND+Disappear&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Exporting Data from Forms to Excel
Hi,
How can I export the data from Forms to Excel like which Export function in the Oracle Applications.
Thank you,
VoonHello,
By using dde package you can export the data from Form to Excel. Here is the sample code which i have used. you can write this code in the when_button_pressed trigger.
declare
appl_name varchar2(255);
channel_id pls_integer;
application_id pls_integer;
x number;
y number;
V_TIME VARCHAR2(30);
begin
if :global.application_id is not null then
message('Application already open');
else
appl_name := 'c:\program files\microsoft office\office\excel.exe';
:global.application_id := dde.app_begin(appl_name,dde.app_mode_normal);
end if;
if :global.channel_id is not null then
message('Communication channel already established.');
elsif :global.application_id is null then
message('Application must be launched first.');
else
:global.channel_id := dde.initiate('excel','book1');
end if;
DDE.POKE(:global.channel_id,'R1C1','Col1 Heading',DDE.CF_TEXT,1000);
DDE.POKE(:global.channel_id,'R1C2','Col2 Heading',DDE.CF_TEXT,1000);
DDE.POKE(:global.channel_id,'R1C3','Col3 Heading',DDE.CF_TEXT,1000);
FIRST_RECORD;
X := No of Records;
for y in 2..x
loop
launch_excel is a program unit--
launch_excel(y,:global.channel_id,:block.item1,:block.item2,::block.item3);
next_record;
end loop;
FIRST_RECORD;
EXCEPTION
WHEN DDE.DDE_APP_FAILURE THEN
MESSAGE('Could not launch application for DDE operations.');
RAISE FORM_TRIGGER_FAILURE;
WHEN DDE.DDE_INIT_FAILED THEN
MESSAGE('Could not initialize DDE communication channel.');
RAISE FORM_TRIGGER_FAILURE;
WHEN DDE.DMLERR_NO_CONV_ESTABLISHED THEN
MESSAGE('Could not establish DDE communication channel.');
RAISE FORM_TRIGGER_FAILURE;
WHEN OTHERS THEN
MESSAGE('Error: '| |TO_CHAR(SQLCODE)| |' '| |SQLERRM);
RAISE FORM_TRIGGER_FAILURE;
END;
LAUNCH_EXCEL
PROCEDURE LAUNCH_EXCEL(
y in number,
channel_id pls_integer,
param1 varchar2,
param2 VARCHAR2,
param3 varchar2) IS
v_rowno varchar2(20) := 'R'| |y;
BEGIN
dde.poke(channel_id,v_rowno| |'C1',col1,dde.cf_text,2000);
dde.poke(channel_id,v_rowno| |'C2',col2,dde.cf_text,2000);
dde.poke(channel_id,v_rowno| |'C3',col3,dde.cf_text,2000);
EXCEPTION
when others then
message('Error --'| |sqlcode| |sqlerrm);
message('Error --'| |sqlcode| |sqlerrm);
raise form_trigger_failure;
END;
null -
Can not get data from database
hi all,
there is a problem , when i write like below :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
p_bukrs , p_hkont are all on the selection screen , and p_bukrs = 1200 another is eq blank. i can not find any data , but with the same condition i can find some data in database , when i debeg i found that p_hkont is initial.
when i write like this :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs .
this time i can find the data like the database.
so , does someone know where the problem is , why i can not get data ?
kind regards
kevinhi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM -
I prepared a GUI user connection application in NebBeans 5.5 accessing mySql database in the company server. The application run very well in desktop.
However, when I post it to the company server web, it gets nothing from the database.
Can any one give advice???
Thank you in advance.
The following is my application
import java.util.Vector;
import java.awt.event.*;
import java.awt.*;
import java.awt.event.*;
public class UserConnection extends javax.swing.JFrame {
//constants for database
private final String userName = "labmanage";
private final String password = "labmanage";
private final String server = "jdbc:mysql://svr.corp.com/labmanage";
private final String driver = "com.mysql.jdbc.Driver";
private JDBCAdapter data = new JDBCAdapter(server, driver, userName, password);
//variables
private String user, pwd;
private Vector<Vector<String>> userTable = new Vector<Vector<String>>();
private Vector<String>colUserNames = new Vector<String>();
* Creates new form UserConnection
public UserConnection() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
userLabel = new javax.swing.JLabel();
pwdLabel = new javax.swing.JLabel();
userTextField = new javax.swing.JTextField();
passwordField = new javax.swing.JPasswordField();
submitButton = new javax.swing.JButton();
statusLabel = new javax.swing.JLabel();
jScrollPane1 = new javax.swing.JScrollPane();
statusTextArea = new javax.swing.JTextArea();
changePwdButton = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("User's Connection");
setBackground(new java.awt.Color(153, 204, 255));
setCursor(new java.awt.Cursor(java.awt.Cursor.DEFAULT_CURSOR));
setFont(new java.awt.Font("aakar", 1, 12));
userLabel.setText("User Name:");
pwdLabel.setText("Password:");
submitButton.setText("Submit");
submitButton.addMouseListener(new java.awt.event.MouseAdapter() {
public void mouseClicked(java.awt.event.MouseEvent evt) {
submitButtonMouseClicked(evt);
submitButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
submitButtonActionPerformed(evt);
submitButton.addKeyListener(new java.awt.event.KeyAdapter() {
public void keyTyped(java.awt.event.KeyEvent evt) {
submitButtonKeyTyped(evt);
statusLabel.setText("Status:");
statusTextArea.setColumns(20);
statusTextArea.setEditable(false);
statusTextArea.setLineWrap(true);
statusTextArea.setRows(3);
statusTextArea.setText("Initial assigned password is \"dime\".");
statusTextArea.setWrapStyleWord(true);
jScrollPane1.setViewportView(statusTextArea);
changePwdButton.setText("Change password");
changePwdButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
changePwdButtonActionPerformed(evt);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(userLabel)
.add(pwdLabel)
.add(statusLabel))
.add(35, 35, 35)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(submitButton)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(changePwdButton))
.add(passwordField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(userTextField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jScrollPane1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(userLabel)
.add(userTextField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(pwdLabel)
.add(passwordField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(statusLabel)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(15, 15, 15)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(submitButton)
.add(changePwdButton))
.addContainerGap(27, Short.MAX_VALUE))
pack();
}// </editor-fold>
private void submitButtonKeyTyped(java.awt.event.KeyEvent evt) {
if(evt.getKeyCode() == KeyEvent.VK_ENTER) {
submitButton.doClick();
submitButton.requestFocus();
changePwdButton.requestFocus();
private void changePwdButtonActionPerformed(java.awt.event.ActionEvent evt) {
String command = evt.getActionCommand();
if(command.equals("Change password")) {
passwordField.setText("");
//Get connection to the changing password panel
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new ChangePassword().setVisible(true);
private void submitButtonActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String command = evt.getActionCommand();
if(command.equals("Submit")) {
user = getUser();
pwd = getPwd();
data = new JDBCAdapter(server, driver, userName, password);
data.executeQuery("SELECT * FROM USERTABLE");
colUserNames = data.getColumnNames();
userTable = data.getDataTable();
if(colUserNames.elementAt(0).equals("")) {
statusTextArea.setText("Can not connect to database");
boolean checkUser = false;
int i = 0;
while(!checkUser && i<userTable.size()) {
if(user.equalsIgnoreCase((String) userTable.elementAt(i).elementAt(0))) {
//Find the user in database
checkUser = true;
//Check user's password
if(pwd.equals((String)userTable.elementAt(i).elementAt(1))) {
//Check for initial default password. The user is requested
//to change his password
if(pwd.equals((String) "dime")) {
statusTextArea.setText("You are requested to change your " +
"initial assigned password. Click 'Change password' please.");
else {
//Set UserConnection Panel to invisible
setVisible(false);
dispose();
//Get connection to the table
if(userTable.elementAt(i).elementAt(2).equals("0")) {
//Get connection to non-editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReportNonEdit rackReport = new PVRackReportNonEdit();
rackReport.createAndShowDialog();
else {
if(userTable.elementAt(i).elementAt(2).equals("1")) {
//Get connection to editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReport rackReport = new PVRackReport(user);
rackReport.createAndShowDialog();
//PVRackReport rackReport = new PVRackReport();
else statusTextArea.setText("You do not get approval for viewing data. " +
"Please contact the administrator for details.");
else {
passwordField.setText("");
statusTextArea.setText("Please enter corrected password or" +
"the administrator for details.");
i++;
if(!checkUser) {
passwordField.setText("");
statusTextArea.setText("Not find such user's name." +
"contact the admistrator for details.");
private void submitButtonMouseClicked(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new UserConnection().setVisible(true);
public String getUser() {
return userTextField.getText();
public String getPwd() {
return passwordField.getText();
// Variables declaration - do not modify
private javax.swing.JButton changePwdButton;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JPasswordField passwordField;
private javax.swing.JLabel pwdLabel;
private javax.swing.JLabel statusLabel;
private javax.swing.JTextArea statusTextArea;
private javax.swing.JButton submitButton;
private javax.swing.JLabel userLabel;
private javax.swing.JTextField userTextField;
// End of variables declaration
Here is my JDBCAdapter
package rackdemo2;
* This is an adaptor which transforms the JDBC interface
* to the PVRackTableDialogue
import java.util.Vector;
import java.sql.*;
import javax.swing.table.AbstractTableModel;
import javax.swing.event.TableModelEvent;
public class JDBCAdapter {
Connection connection;
Statement statement;
ResultSet resultSet;
Vector<String> columnNames = new Vector<String>();
Vector<Vector<String>> rows = new Vector<Vector<String>>();
ResultSetMetaData metaData;
public JDBCAdapter(String url, String driverName,
String user, String passwd) {
try {
Class.forName(driverName);
connection = DriverManager.getConnection(url, user, passwd);
statement = connection.createStatement();
catch (ClassNotFoundException ex) {
System.err.println("Cannot find the database driver classes.");
System.err.println(ex);
catch (SQLException ex) {
System.err.println("Cannot connect to this database.");
System.err.println(ex);
public void executeQuery(String query) {
if (connection == null || statement == null) {
System.err.println("There is no database to execute the query.");
return;
try {
resultSet = statement.executeQuery(query);
metaData = resultSet.getMetaData();
int numberOfColumns = metaData.getColumnCount();
// Get the column names and cache them.
// Then we can close the connection.
for(int column = 0; column < numberOfColumns; column++) {
columnNames.addElement(metaData.getColumnLabel(column+1));
// Get all rows.
while (resultSet.next()) {
Vector<String> newRow = new Vector<String>();
for (int i = 1; i <= columnNames.size(); i++) {
String tempString = resultSet.getString(i);
if(!tempString.equals("null")) {
newRow.addElement(tempString);
else {
newRow.addElement("");
rows.addElement(newRow);
//Modify dataTable to add empty row to separate chassis
if(numberOfColumns>1) {
int nRow = rows.size();
Vector<String> row = new Vector<String>();
for(int i=0; i<numberOfColumns; i++){
row.add("");
if(nRow>0 || numberOfColumns>0) {
//Adding blank row to separate chassis
int i = 0;
while(i<nRow) {
if(!rows.elementAt(i).elementAt(0).equals("")) {
if(i>0) {
rows.add(i, row);
i++;
nRow = rows.size();
i++;
close();
catch (SQLException ex) {
System.err.println(ex);
public void close() throws SQLException {
resultSet.close();
statement.close();
connection.close();
// MetaData
public Vector<String> getColumnNames() {
return columnNames;
public Vector<Vector<String>> getDataTable() {
return rows;
public int getColumnCount() {
return columnNames.size();
// Data methods
public int getRowCount() {
return rows.size();
}Thank you for your answer.
I'm very new to mySql as server. When I was assigned
to write the application, the administrator has set
up mySql database in the company web server for my
application. My program runs very when using my
workplace desktop with java web start or with java
web start in netbeans (all paths should be link to my
desktop hard disk, i.e. users/application/). I can
not run the application at home because I can not
access to the company intranet server (for security
purpose). The problem happens when I post the
application in the company web page (I have to modify
all paths in jnlp file to the company web address).
The program then runs without exception except it
seems that it gets no data from the database (for
example, when I type my username, it returns that
"There is no such user name. contact.." as what I
code in the application for not correcting user name)
It happens for not only using my company desktop but
also for others.
Please help me.
Thank you in advance.And all this could have been answered yesterday, in your other thread, when I asked you "Is the DB configured to allow that user to connect to the DB from where that user is attempting to connect from?"
Seeing as how you get that error, the obvious answer was, "No." At which point we could have continued.
Configure the needed users into the DB, without forgetting to allow them access from the machines from which they are going to access from.
Although, I agree with Rene, that you should set up a server of some sort, located on the same machine as the DB, for communicating with the DB. -
Can not read data from URL!
Hello,
I want to read data from URL (http://84.100.130.82:8000/;stream.nsv). But can not do it. Because when try to call function openDataInputStream() shows this error: java.io.IOException: response does not start with HTTP it starts with: ICY. How I can fix this bug?
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
StringBuffer b = new StringBuffer();
String response,
responseLitle;
c = (HttpConnection)Connector.open(“http://84.100.130.82:8000/;stream.nsv”);
os = c.openOutputStream();
os.flush();
is = c.openDataInputStream(); // ERROR CODE HERE
int ch;
// receive output
while ((ch = is.read()) != -1)
b.append((char) ch);
response = b.toString();Regards, RamunasHi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot! -
Can not get data from actionscript db operation class?
DBOperation.as:
import flash.events.*;
import flash.net.NetConnection;
import flash.net.ObjectEncoding;
import flash.net.Responder;
import mx.collections.ArrayCollection;
import mx.controls.List;
import mx.rpc.events.ResultEvent;
import mx.collections.ArrayCollection;
public class DBOperation
private var nc:NetConnection;
private var responder:Responder;
public var list:ArrayCollection;
public function DBOperation():void{
nc = new NetConnection();
nc.objectEncoding = ObjectEncoding.AMF0;
nc.connect("rtmp://localhost/ins");
public function getSolutionData(sql:String):Boolean
responder=new Responder(getSolutionList,null);
nc.call
("dbo.getSolutionData",responder,sql);
return true;
public function getSolutionList
(solution:Object):void{
var solutionList:Array = new Array();
for(var items:String in solution)
solutionList.push
({label:items,title:solution[items].title,owner:solution
[items].owner,submitTime:solution[items].submitTime,image:solution
[items].image,imgInstruction:solution[items].imgInstruction});
list = new ArrayCollection(solutionList);
datagrid.mxml:
<mx:Script>
<![CDATA[
import DBOperation;
import mx.collections.ArrayCollection;
[Bindable]
private var solutionList:ArrayCollection;
private function initDG():void{
var dbo:DBOperation=new
DBOperation();
dbo.getSolutionData("some sql
strings");
solutionList=dbo.list;
]]>
</mx:Script>
my problem is I can get the data using DBOperation class,but
I can not
assign it to solutionList by "solutionList=dbo.list;"
The debug information says dbo.list=null, however inside
DBOperation
the "list" is full of data.
What's wrong with it??
Thanks!hi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM -
Can we export DATA from all tables in a schema?
Hi,
I have a question; Can we export all the DATA from all the tables present in the schema to any source (eigther CSV, TXT, DAt, etc..)?
Or
Can I have a PL/SQL procedure to display DATA from all Tables in a schema?
With Best Regards,
- NaveedHi,
This is pretty much what you need.
DECLARE
V_COUNT NUMBER;
v_sql varchar2(1000);
IN_OWNER_NAME VARCHAR2(100) := 'AP' ; -- SCHEMA NAME
TYPE T_COL_NAME is table of varchar2(1000) index by binary_integer;
v_col_tbl t_col_name;
BEGIN
FOR i in
(SELECT object_name
FROM dba_objects
WHERE owner = IN_OWNER_NAME
AND object_type ='TABLE'
and rownum < 2)
LOOP
v_sql := 'SELECT COUNT(*) FROM ' || i.object_name ;
EXECUTE IMMEDIATE v_sql INTO V_COUNT;
if v_count > 0 then
v_sql := 'SELECT * FROM ' || i.object_name ;
select column_name
bulk collect
into v_col_tbl
from DBA_TAB_COLUMNS
WHERE TABLE_NAME = I.OBJECT_NAME
AND OWNER = IN_OWNER_NAME;
-- start selecting the column and exporting using the column names selected.
end if;
if v_col_tbl.count > 0 then
for i in v_col_tbl.first .. v_col_tbl.last
loop
DBMS_OUTPUT.PUT_lINE(v_col_tbl(i));
end loop;
end if;
DBMS_OUTPUT.PUT_lINE( i.object_name || '-' || v_count);
END LOOP;
END;
- Ronel -
Can not delete data from table which is queried in my stored procedure
Hi,
Anyone knows how to fix it:
I have a table. In a stored procedure, I have a simple query running on this table.
When I want to delete one record from that table, I got error message:
ORA-04091: table *** is mutating, trigger/function may not see it.
Thanks first.Rick, the only time you should get a mutating table error is when a trigger is involved. FK problems have separate error codes (and would be a different problem than the one that started this thread). Using a DBA id check all the tables subject to DML by your function and by whatever calls your function for triggers. Only the owner or a DBA can see the existence of triggers on a non-owned table. This has caused some of the developers I work with to think tables that had triggers do not have them since they do not work under the owning or a DBA ID.
By your description of what you are trying to do in the function we do that all the time without problem.
How large is the function? How/When is it called?
Mark D Powell
Maybe you are looking for
-
Oracle Import errors IMP-00098, IMP-00028 , IMP-00008
Hi all I have successfully exported a schema called ahc from Database 10g Enterprise Edition Release 10.2.0.1.0 on linux. but when i imported in test db server running the same OS and Oracle Versions.it returnd errors . i took the export three times
-
Granting system privileges DEBUG ANY PROCEDURE and CONNECT SESSION in 10gXE
I am using Oracle DB 10g Express Edition and trying out SQL Developer. Whenever I want to debug a procedure I got the error: This session requires DEBUG CONNECT SESSION and DEBUG ANY PROCEDURE user privileges. But I don't see these privileges to gran
-
Hi there: I found one material in co06, rec/reqd qty is 1596, but *** ATP qty is 6, so i failed to create outbound delivery, why those two quantity are not same? It is supposed to be same, help.
-
Greetings! I am authoring my first dvd and would like that when ever the viewer press the eject buttom a short "goodbye" video track plays. It is similar to the first play, but inverse; a kind of last play. Is there any script or command for it? Than
-
How to back up and reinstall Snow Leopard
My computer keeps crashing. It's mainly to do with items that are flash based, like double clicking flvs, flash being on a website. Sometimes even mail crashes too though. I have tried rebuilding the directory with diskwarrior but it is still doing i