Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5

can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
I can hear them running but I can not get them on the computer any more. They did work at one time.
Can any one PLEASE help?

Nothing appear on my desktop. 
I did Repair and Verify the HDDs in Disk Utility>First Aid from the
Utilites App about a dozen times ans they all said everything was good
except for the last time there were erors found and I ran the
Disk Utility from the Start Up Disk and the repairs were made and everything
was subposed to te good and still Nothing on the desk top.
Ginger

Similar Messages

  • Using an external hard drive to connect the camera to the Mac Book Pro

    I am about three weeks away from a 9 to 4 pin firewire cable. In the meantime, I am logging and capturing from my Canon AX HI through my external hard drive. I am not super amazed at the quality of the image, it's noisy.
    I am using HDV tapes, and I don't beleive the lighting should be causing the issue.
    Does anyone know if using the external hard drive to connect the camera to my Mac Book Pro is compromising the quality of the image? Can I expect a beautiful strong image on a lap top?
    Thanks for any help.

    There is ZERO quality loss when you capture via firewire. It is a digital transfer of files...that's it. The issue you have is that you are trying to judge the quality of your image based on what you see with your computer monitors, and that is simply the LAST thing you should be doing.
    And since this is HDV, the only way to monitor that is with an HD card or I/O device, and an HD monitor or TV. Like the Matrox MXO2 mini or AJA I/O Express mini and HDTV.
    Shane

  • How can I use my external hard drive for my iphoto instead of my mac book pro memory?

    i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • I am setting up a time machine backup to a external Hard drive.  I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

    I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days.  I've decided that I want to turn encryption off and partition the disk. So I do I start over?

    With the external drive attached, open Finder>Applications>Utilities>Disk Utility.  Select the external drive from the list in the left side panel of the DU window.  In the main window panel, click Partition in the buttons top center of that panel.
    Select the number of partitions you want and adjust their sizes.
    For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults].  Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup. 
    Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
    Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

  • Can not fine external hard drive for time machine sence lion was installed

    I can not fine external hard drive for time machine sence lion was installed, it don't reconise it at all.

    I have a Mac Mini (late 2009) and I have an iomega 1TB external hard drive connected to my mini via firewire and usb (usb allows me to use the usb ports on the external 1TB drive to daisy chain other devices).  Since I installed Lion, my Time Machine  and this 1TB drive (and its partitions) is finicky.  Sometimes it is mounted and sometimes it is not.   This issue has only surfaced post Snow Leopard and in the Lion era. I am not the first to say this but the whole reason I went Mac was b/c of Vista.  I am beginning to think that Lion is the new Vista.  Sorry for the latter, just venting... b/c this ain't the first issue with Lion.

  • Why can not you thought of improving the design of power adapters for mac book pro from damage so easily?

    why can not you thought of improving the design of power adapters for mac book pro from damage so easily?

    I congratulate you. you are very lucky because I hurt my less than two years taking all possible care. and have found that this has happened to many people more

  • Can i get OS X LION for free if i bought my mac book pro in July 2011?

    i would like to know if i can get OS X LION for free if i bought my mac book pro in July 2011 ? thx

    Apple - OS X Lion - Get up to date.
    If you use an PowerPC apps / Rosetta read here first >  Lion upgrade questions and answers:  Apple Support Communities

  • Help?  Can not find external hard drive after upgrading to 10.6.3

    I upgraded my iMac to Snow Leopard 10.6.8 and now my external hard drive does not appear.  Not sure what to do.

    It is powered (the light is on).  I was uploading photos from the drive yesterday, so it worked perfectly fine before the upgrade to 10.6.8 (which I did during the night).  Is there anything else to try before I move it to another computer to see if it works?  Again, thanks.

  • I back my music and photos from my windows laptop before it broke on a external hard drive . I just got a new mac book can I use the hard drive to put my wave files and JPEG files on to my mac book

    My old lap top broke I save all my music what is wave and my pitches is jpeg on external hard drive
    the old laptop was a window base laptop
    so I got a new mac coming and I been told my hard drive won't won't on the mac and I lose all my photos and music
    any help
    thanks

    If your external drive has the right ports, you should be able to plug it up to your Mac and copy over your photos and wav files. You'll probably (I don't know this for sure as it's been a long, long time since I've dealt with wav files) need to convert the wav files to MP3 or some other format (but I would try opening them directly from iTunes, first - wait a second... yes, iTunes will open wav files).
    There are only a fixed number of ways that Windows drive can be formatted and a Mac can read (though not necessarily write) them all. So you should have no trouble with that.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • How do i format an external hard drive for use on both windows and mac book air?

    how do i format an external hard drive for use on both windows pc and mac book air?

    Use exFAT on the PC.
    (71374)

  • Can i get a free os lion if i have bought my mac book pro 2 weeks after the launch of the os lion

    hi .  i bought a mac book pro from the US . it came witht the older os . offcourse assuming that this would have been packed in china before the launch of os lion . would i have to buy the os lion or is there any way of getting an upgrade without paying for it

    See
    http://www.apple.com/macosx/uptodate/

  • Can't get iPhoto 9.3.4 to update on my new Mac book pro. Keeps saying an error has occurred. Any suggestions

    Can't update new Mac book pro with iPhoto 9.3.4. Any suggestions?  Keeps saying an error has occurred.

    Try using this updater manually: iPhoto 9.4.3
    Or if you're having problems with the App Store you might try this:
    1 - enable the Debug menu in App Store:
    open the Terminal application.
    copy the command below and paste into the Terminal window:
    defaults write com.apple.appstore ShowDebugMenu -bool true
    followed by Enter.
    launch App Store, login.
    2 - select the Debug ➙ Reset Application option:
    3 - try again.
    OT

  • I can't get on to app store or itunes store with my Mac Book Pro after changing to OS X Mavericks, any solutions?

    I doenloaded the Mavericks yesterday and since then, I couldn't get on to itunes store or app store or browse the web by safari since then.
    However, I can use chrome to get on to all the websites, so it's not the connection problem, anyone knows what to do, cos I am really stuck and starting to regret updating to Mavrericks.

    Hello Gambo12,
    It sounds like you are getting the following error in iTunes and the App Store, "iTunes could not connect to the iTunes Store. Make sure your network connection is active and try again," but you are able to connect to the Internet.  I found an article with a few steps you can follow on your Mac:
    If you haven't been able to connect to the iTunes Store, a software conflict or your Internet service provider (ISP) may be blocking your access.
    Update iTunes to the latest version.
    If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. To configure your firewall, please refer to the "Blocked by firewall" section in this article.
    You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Click here to find out how to use Keychain First Aid to resolve any issues with your keychain.
    If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
    If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
    You can find the full article here:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Time Capsule can't backup external hard drives connected to it. Got that.

    Hello Apple Support Communities! This is my first post. Hope this finds you all well My first year as an Apple user. I bought a 2-Tb TC and am running my first backup to my MacBook as I write this.
    Problem statement: TC can't backup external hard drives connected directly to it, but the ones connected to the Macs that are connected wirelessly to it. Duly noted. However, the Spotlight will reindex the hard drives connected to the Mac and that will take hours; the whole backup will take days. Thus, excluding the hard drives at "System Preferences > Spotlight > Privacy tab" will probably help reduce the time of backup, or just ejecting them will do too. That itself has not proven effective coz it's still taking forever (50Gb in 2 days, still going).
    Questions:
    1) Do I wait until my first backup to my MacBook's internal hard drive is done before I connect my hard drives to my MacBook and attempt another backup? If yes, how do I go about the excessive time Spotlight reindexing takes if I intend to backup my hard drives connected to my MacBook?
    2) Is there any other way of speeding up the first-time backup?
    *Note: All versions of OS and firmwares are up-to-date. TC is connected to an external wireless router. TC is intended to be used as backup device and / or file server only.
    P/S: Apologee if this has already been discussed before, thus, a link to previous discussion thread would highly be appreciated)
    - Shook Hashem, Malaysia.

    How do I backup the externel hard drives connected to my MB. I was under the impression that that has already been done, because I've read it somewhere in a discussion that said it's done automatically unless I exclude it from a backup, which I didn't. So it's supposed to backup the external hard drivestoo because I had them connected to my MB the entire time during the backups.
    By default an external drive is excluded.. the list is odd.. if I plug a drive into the mac.. it immediately is listed as excluded.
    This is not the list of included.. this is the list of excluded.. remove it from the excluded list to include it.
    It is kind of reverse polish notation in backups.
    If I want to enter the Time Machine, should I enter it with the TM turned on or off?
    Not sure what the question means. If you use the star wars display and want to recover files then use TM off.. but read up pondini.. how to do restore etc.
    http://pondini.org/TM/FAQ.html
    15A in particular on the how to use TM.
    When do I uplug the ethernet and use the wireless connection instead?
    Once you have finished the main backup you can go back to wireless. The incremental backups are mostly very small.

  • MacBook not showing external hard drive connected to Air Port Extreme

    I have a MacBook 5.2 running Mac OS X Version 10.5.7. I am running a wireless network Air Port Extreme router Version 7.4.2. I have connected a 1 TB Western Digital 10EAVS External hard drive and a printer to the Air Port Extreme router via a USB 2 hub. My MacBook sees and I am able to utilize the printer, but the Western Digital 1 TB External drive does not show up. I can see the 1 TB External drive via the Air Port Application setup, but it is not showing up on my desktop or in Utilities/Disk Utilities. I have connected the External drive directly to the USB port on my MacBook, and the drive showed up on my desktop instantly. I partitioned the External drive into two partitions and ran Time Machine which successfully backed up my MacBook. I then disconnected the External hard drive from my MacBook and reconnected it to another USB port in the hub connected to the Air Port Extreme. Once again, my MacBook does not see the External hard drive. I can see the External hard drive via the Air Port Extreme application right down to the two individual partitions. I even removed the USB hub and plugged the External hard drive directly into the Air Port Extreme router, but my MacBook still did not see the hard drive. I've restored version 7.4 and 7.4.1 on the Air Port Extreme, but it did not help. Does anyone have any insight what settings might need to be changed on my MacBook to allow it to connect to the External hard drive while it is plugged into the Air Port Extreme wireless router?

    Do you have an older "dome" style AEBS or the rectangular model? The former will not work with TM. Early versions of the former may not work until you enable them to see a TM drive by doing the following:
    Open the Terminal application in your Utilities folder. At the prompt paste the following command and press RETURN:
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    The drive should now be accessible via TM.

Maybe you are looking for

  • Uploading data from excel file to a dynamically created internal table

    Hi, I have a requirement where i have to upload data from an excel file into a database table. I would be able to determine the structure of the table only at runtime based on the user input.. so i have created an internal table dynamically. Could yo

  • Select-options in SE51 with problem

    Hi! I´m trying to put select-options in screen by SE51. I create a subscreen: selection-screen begin of screen 9001 as subscreen. select-options: so_matnr for mara-matnr. selection-screen end of screen 9001. And i call this screen in PBO of my screen

  • IE7 and CSS

    I looked the forum for a topic like this but I didn't find it. I've heard that IE7 does not support correctly the CSS. Is it true? Can I tell my customers to install it? Some of them doesn't want to use Firefox-

  • FM - SWX_GET_MANAGER

    I am creating a report for Terminated & Suspended Employees.  These are Action Types T1 & SE on Infotype P0000.  The report must include the Manager's details.  I am using the FM SWX_GET_MANAGER to get the Manager's User ID and it is successful for S

  • Xml gallery problem??

    I´m using a xml gallery with thumbs . I tried several things but can´t get it work. I want to add links in the textfield. The text in the textfield comes from a .txt file and xml file. I dont know if it´s possible to add links in .txt files or if the