Can not get the agent from rule determination
Dear expert,
We have a PR workflow,for one step, the agent is determined by one rule,In our Q system,everythink is ok to get the agent correctly,and the workflow also can works.but in our P system,can not get the agent from the rule,when we simulate the rule,the agent can be get smoothly,but in workflow,realy can't get the agent(after trace the workflow), so would you like to give me sone suggestion, whant had happen in our workflow?
Many thanks!
Best Regards,
Kerry
Tks!
I have one question,how to check the agent assignment is active?
and also want to say,the rule that determin the responsible agent is used at one step of the workflow,not for possible agent of task ,and the rule's type is RESPONSIBILITIES.
Best Regards
Edited by: Kerry Wang on Jun 25, 2010 3:14 AM
Similar Messages
-
I use Cisco DHCP I can not get the IP from manual binding.
Good day,
I am using a Router Cisco 1841 as DHCP Server and I trying to configure a manual binding but is not working, here is the configuration:
Router#sh run
Building configuration...
Current configuration : 1026 bytes
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot system flash c1841-adventerprisek9-mz.123-11.T10.bin
boot-end-marker
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
ip cef
ip dhcp excluded-address 172.16.12.1
ip dhcp pool Test
host 172.16.12.254
hardware-address 0100.016c.cbaf.31
client-name Test01
ip ips po max-events 100
no ftp-server write-enable
no crypto isakmp ccm
interface FastEthernet0/0
ip address 172.16.12.1 255.255.254.0
speed 100
full-duplex
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface ATM0/0/0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
interface Serial0/1/0
no ip address
shutdown
no fair-queue
clockrate 2000000
ip classless
ip http server
no ip http secure-server
control-plane
line con 0
line aux 0
line vty 0 4
login
end
Router#sh ver
Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 12.3(11)T10, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 03-Mar-06 17:40 by dchih
ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
ROM: Cisco IOS Software, 1841 Software (C1841-ADVSECURITYK9-M), Version 12.4(3c), RELEASE SOFTWARE (fc1)
Router uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c1841-adventerprisek9-mz.123-11.T10.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 1841 (revision 6.0) with 236544K/25600K bytes of memory.
Processor board ID FTX1013W27Q
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 ATM interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Router#
Thank You Very Much
Regards
HGHello Hernan,
The provided MAC address contains an ethernet media type. Try changing the ethernet media type to .66 as per documentation.
hardware-address 0100.016c.cbaf.31
-------------------------------------------^
Alternatively you can remove the last three characters ".31" from the configuration.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hiad_c/ch10/hipdhcps.htm#wp1074511
Use "debug ip dhcp server" to see what happens during DHCP negotiation with client/server.
HTH
--Leon
* Please rate posts. -
Why I can't get the cookie from this web site when I can get it from google
public static void main(String[] args) throws Exception {
// I can get the cookie from "http://www.baidu.com"
// String domain1 = "http://www.baidu.com/";
// String domain2 = "www.baidu.com";
// I can get the cookie from "http://www.google.com"
// String domain1 = "http://www.google.com/";
// String domain2 = "www.google.com";
// I can not get the cookie from "http://www.csdn.net"
String domain1 = "http://www.csdn.net/";
String domain2 = "www.csdn.net";
URL url = new URL(domain1);
HttpURLConnection httpConn = (HttpURLConnection) url.openConnection();
httpConn.setRequestProperty("User-Agent", "Internet Explorer");
httpConn.setRequestProperty("Host", domain2);
httpConn.connect();
String cookie = httpConn.getHeaderField("Set-Cookie");
System.out.println(cookie);
My question is: How can I get the cookie from the web site:http://www.csdn.net?I found it in my computer , the location is: C:\Documents and Settings\zhijun\Cookies\zhijun@csdn[2].txt
and there are many characters, they are:
__utma
17226283.1339458738.1221633513.1223535733.1223539291.58
csdn.net/
1600
786595712
30107528
1029600608
29960677
__utmz
17226283.1223539291.58.57.utmccn=(organic)|utmcsr=baidu|utmctr=VB.NET%B2%BB%C4%DC+%B6%CF%B5%E3|utmcmd=organic
csdn.net/
1600
4189609856
29997389
1029910608
29960677
LastVisitedForum
b7e466c6-291a-4072-acee-15d2be78c647*b5f1380c-f04c-4682-861a-54357b14186a*0a4a010e-8694-4139-b91f-a4ee1374981b*caa7532e-956b-4661-a53f-d46e3f1a8187*8b327318-2c42-4a49-8aed-ef8c33697e7f
csdn.net/
1536
2105548800
29964700
960690608
29960677
userid
2018946
csdn.net/
1536
1900813440
29963485
771368976
29960669
__utmb
17226283
csdn.net/
1600
1849111424
29960681
1029760608
29960677
ABCDEF
X1rZPCiZupWekhlTu78xWhr2Oj5GmFwk0J%252b8COfIv7IvVh2PgEPu2V7ooeZuUnene2j%252fDKJsNnZWYBSQxVkTfunvGq%252fDYuzFALM0ugLUmppZAHgfUWgQ%252bziPRLLJyFdzUpHwfG%252fReU8SfFy588HH02NPWPsO8RjgtHym%252bcJdUOnIH5J%252bkPEj%252b%252bZwlSPb5u0M0mPQRU1gOScfY4b981MifF4ksep8sZp1Ro2ofGHIg6l%252bgJ0P0XFASz2cJU8Objo%252f
csdn.net/
1536
1900813440
29963485
770898976
29960669
QWERTOP
6695
csdn.net/
1536
1900813440
29963485
771058976
29960669
activeUserName
boxiuzhen
csdn.net/
1536
1900813440
29963485
771058976
29960669
UserName
boxiuzhen
csdn.net/
1536
1900813440
29963485
771058976
29960669
PName
542a00960558bf1690fe08696d1245f407130025d59bd14ad6430f
csdn.net/
1536
1900813440
29963485
771368976
29960669
Is this prove that the csdn web site which I can not get the cookie is not using url-rewriting? -
HT1454 why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
-
After having spent EUR 130 on cables from apple, i still can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?
Backing up an iOS device will copy some data to a backup file within iTunes, but this excludes all media. You can also transfer iTunes Store purchases from the iDevice to iTunes but, without using a third-party tool, nothing else. As long as you do not sync the iPod with your new library, the media that's on it will remain ... for as long as it keeps functioning, is not lost, stolen, eaten by the dog, ...
You may also have an option to recover your previous library from your old laptop; as long as its hard drive isn't fried, a computer repair store or technician may be able to extract the drive, mount it in an external enclosure, and copy your data to another PC. Whatever you choose, there is no real alternative to having all your media on your computer, managed by iTunes, and regularly backed up to another device/location. -
I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following: mount -uw / rm/var/db/.AppleSetupDone shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda MarkleYou did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password. -
I just upgraded my iMac to OS 10.8.5 from 10.6.8 and now I can not get the calendars on my Mac and my iPhone 4s (running iOS 8.3) to sync. I already tried replacing the calendars on the phone with those on my computer but nothing happened.
Set up iCloud
Set up iCloud (2) -
My Macbook are from 2012, and i can not get the Airplay to work. Apple-tv3
Hello,
I can not get the Airplay work betwine my Macbook and Airplay.
Have read a lot about it online, and can not understand way its-not work. My mac is from 2012. have dobbel Chek. Also with Serial number on our site.
Do you have any answer for way its not work?Update to Mountain Lion, or higher, which is required.
Troubleshooting AirPlay -
My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.
POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap" -
after restoring the iPhone, the iPhone can not get the high resolution photo from album of iCloud, unless re-share all the photo to the iCloud.
If you plug up both to computer, open itunes, click "back up to computer" on both (not necessary for the one that's being transferred to) then on the one that's sending data click "back up" in the iTunes menu. It will then back up (if not already done in sync). Now plug up the second one (being transferred to) and on the iTunes menu, click "restore from backup" then choose the device you just backed up, and click "ok" or what it says.
Hope this helped
P.S. I am referencing to using iTunes <11. Some features I show here might not be available in iTunes 10 -
can someone please tell me why I do not get the delete from disk option when trying to delete duplicate items
The content must be in the iTunes directory structure for that option to appear.
-
I can not get the 12 days of Christmas to let me get the free gift. I restarted my iPad, I reloaded the app, my iTunes is a Canadian address . The error I get is " it is not available from the Canadian store at this time"
Hi,
See this thread:
https://discussions.apple.com/message/20681369#20681369
Biti -
I can not get the flash player plug in to work with Internet Explorer
I can not get the flash player plug in to work with Internet Explorer
Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. -
Can I get the language from device?
with the adobe packager 3.0 can I get the language from device?
thanksYou can get the devices "Language" setting by looking at the first element of the array returned by Capabilities.languages.
Unfortunately the codes returned don't seem to always match the standard naming convention for language codes.
var languageSettings:Array = Capabilities.languages;
if ( languageSettings.length > 0 )
if ( (languageSettings[0]).toString().toLowerCase() == "en-gb" )
// Do something based on the language being "British English" in this case.
I still need a way to determine if the user is using Canadian English, but the device seems to only have 2 English settings (English and British English).
There is a Canadian "Region Format" setting also under Settings->General->International->Region Format, but I'm not sure how to access that information.
If anyone knows how to access the region format, I'd love to know.
Thanks.
Maybe you are looking for
-
What is the best artical for understanding Data Pump
Hi, What is the best artical for understanding the relationship / dependency of NETWORK_LINK with FLASHBACK_SCN or FLASHBACK_TIME . Why it is manditory to have NETWORK_LINK , when we are using FLASHBACK_SCN or FLASHBACK_TIME. Can some one explain the
-
Apple folks: please read this for AppleTV power management!
I got my AppleTV two days ago and I really enjoy it, but the fact it doesn't have a real "turning off" or "auto-turning off" or "auto-sleeping" feature when not used for a while , it's a real shame. With all the environmental problems we have and nee
-
Full Screen Button won't activate with JAWS screen reader
Hi, I use a JAWS screen reader for testing compliance issues. On some videos I'm testing, when I activate the Full Screen button, the video goes to full screen mode for a second and then returns to normal screen mode. Please, can anyone offer me a
-
My company has added a custom tab to RECN. On this tab we update a custom table containing additional information related to a real estate contract. Everything seems to be working just fine except one little thing: If I change some data on our new
-
When I put a musical CD into the reader (no matter if it is the internal Matshita or an external drive) the system write a message like :" this computer cannot read the disk" (in italian "il disco inserito non è leggibile da questo computer"). I have