Can not get Wi-Fi to connect
I have never been able to get my Wi-Fi to connect. It shows my home signal, I enter the pass code and hit join. It says it is "unable to join the network linksys-g". If I go into settings under Wi-Fi Networks is shows my signal there but is no information for it at all under any of the headings. I do not understand this network stuff. Someone else set up my wireless because I dont get it. Can someone help me. It would be great to use the iTunes on my phone but at this rate it will never happen. I would greatly appreciate any advice anyone could give me.
I had similar problem with easy fix after reading SEVERAL discussion boards. Go to you router settings and check your DNS server settings on your router, then manually enter this same DNS address on the iPhone (settings/wifi/touch the name of your home network) I had a similar problem with my Powerbook G4, had to manually enter the DNS settings. Took just a couple minutes and now works just fine. If you use a wireless laptop, you can also check the DNS server settings on the computer versus going to the router. Hope it helps.
Similar Messages
-
Hi I can not get my printer to connect to the internet.
Hi
I can not get my printer to connect to the internet. it is connected to my network according to wifi test printout but my computer can not find it.
When I try to download apps directly from the printer it says that it is not connected to the internet.
I have an airport extreme + 3 airport express a macbook pro and printer is an HP 7510e
I see the printer on the first page in the airport utility when I click on my airport extreme.so it is online but nothing happens when I try to print.
Please help meHi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks -
Can not get my MacPro to connect to iCloud
I can not get my MacPro to connect to iCloud. It tries periodically but returns the message "This Mac can't connect to iCloud because of a problem with [my account]@aim.com." This aim.com address is one I have not used in years. I have tried to purge all references to this address in my system but must have missed some. How do I correct this?
This aim.com address is one I have not used in years.
Is it still functional ? iCloud sends a welcome mail to this adress. Look for it. -
I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
I can not get my Ipod to connect with my computer using a usb cord
I can not get my Ipod to connect with my computer using my usb cord ?
Hi starhalcomb,
I'm sorry to hear you are having issues with your iPod touch. I also apologize, I'm a bit unclear on your exact configuration. If you are having issues with your iPod touch not being recognized in iTunes when you connect via USB, you may find the information and troubleshooting steps outlined in one of the following articles helpful:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden -
I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.
Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks -
I can sign on the the web but I can not get the email to connect?
I can sign on the to the internet yet I can not sign is and get my mail... when i press the mail app on the dock get no responce
Hi Jeff
Thank you for your reply on my request.
Im working on 2 windows 7 computers.
The one at my work downloads fine and fast, the other never ends its "waiting to install" -
IOS 7 I can not get movie shares to connect
Since upgrading to iOS 7 and maverick I have difficulties connecting my iPad movies to my computer via state. Any thought on how to get this working?
Hi starhalcomb,
I'm sorry to hear you are having issues with your iPod touch. I also apologize, I'm a bit unclear on your exact configuration. If you are having issues with your iPod touch not being recognized in iTunes when you connect via USB, you may find the information and troubleshooting steps outlined in one of the following articles helpful:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden -
My phone will not let me connect to any wifi at all what can I do?
I am having the same problem too. It won't even display the wifi names around me, and when i try to connect and enter the password (yes its the correct one), it says failed to connect.
-
I recently had to unplug my router and modem. When I reconnected and rest them my desktop computer connected finr but I am having trouble getting my ipad to reconnect.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
Thx
AgnesHey agnesfromcopenhagen k,
Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M. -
Static NAT pass-through; can not get to work
I am not having any luck getting a static NAT pass-through to work.
BM3.8/NW6.5 all patched to the latest patches (no betas). IPFLT is NOT
loaded.
My internal network on one LAN all have 10.100.xxx.xxx private addresses.
Dynamic NAT works great.
I have secondary public IP addresses bound to my public NIC. Static NAT
mapping between the secondary public IP addresses and the couple of
individual private addresses work just fine. In other words, all has been
working fine.
I need to give one of those internal resources its public IP address
(change it's private to its public).
OK, I went into the NAT table and changed the proper public <-> private to
public <-> public (identical addresses). I changed the internal computer
to it's public address/mask with the same default gateway the server is
using. The internal computer can now only ping itself; can't even ping
it's default gateway. I did reinitialize, and also restarted. I can not
get the pass-through connection to work.
Any thoughts will be well received.
BobRobert,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Can not get my Sungale Tablet to connect to wifi.
Can not get my Sungale Tablet to connect to wifi.
You need to get your wireless settings first. Get the SSID (wireless network name) and security key (password) for your network. Are you using a Linksys router? Follow these instructions to retrieve your wireless network's info: Checking the Linksys router’s wireless settings. Then on your tablet, go to Wifi under Settings. Select your network and type in the password. If your tablet is an Android, here's how: Connecting your Android™ tablet to your wireless network.
-
Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5
can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
I can hear them running but I can not get them on the computer any more. They did work at one time.
Can any one PLEASE help?Nothing appear on my desktop.
I did Repair and Verify the HDDs in Disk Utility>First Aid from the
Utilites App about a dozen times ans they all said everything was good
except for the last time there were erors found and I ran the
Disk Utility from the Start Up Disk and the repairs were made and everything
was subposed to te good and still Nothing on the desk top.
Ginger -
I can not get my Library back on Itouch. Itouch shows not connected to itunes on screen
What do you mean by "Itouch shows not connected to itunes on screen"?
Maybe you are looking for
-
Issue with spamassassin, now mail not working
Hi ! I installed spamtrainer almost two months ago. Been feeding the [email protected] for several weeks now , 700 emails each day at least . There was very little improvement if none at all. Tried to add "@local_domains_maps = (1)" to amavisd.c
-
my ipod screen has been white all day it previously did this before but fixed itself and now it wont . how can i fix it without using my home button because my home button is stuck
-
I am not sure how iphone would handle the mail traffic. I understand that once you open the outlook, all mails goes out of your hand phone. My worry is then how to refer the past mails while not in front of the machine and outlook? I am currently usi
-
GR for Purchase Order for Trading Goods
Hi, I have a query on configuration for accounting entry for purchase orders for Trading goods. When i do the GR for Purchase order for a trading good, the accounting entries are, Inventory Dr GR/IR Cr and Purchase Expenses Dr Purchase Seto
-
Can I use my iMac as Monitor for "dead" iBook Screen
Help My severely aged iBook G3 seems to have lost its visuals. The screen is dead. I hear the hd spool up and everything seems to be working I just can't see... I have a G5 iMac. Can i use the iMac as a monitor so that I can see to back up my iBook H