Can not open CR2 files from a Canon 600D in PSE

Hi
Ok i will put my hand up and say i am very new to PSE, I have updated the software and have the latest camera raw plug in, but for some reason i can not open the raw files created by my 600D.
Can anyone help, or am i going to have to convert them.
Sorry if this has been asked before, but i couldn't find any posts
Chris

The 600D should be supported in ACR 6.4 which is currently in beta so you'll have to wait until it's released, probably within days or weeks, for native support within Elements.
While you're waiting, you can download the beta version of the DNG Converter 6.4 from Adobe Labs and use that to convert your CR2 files to DNGs which will open in older versions of Camera RAW.
http://labs.adobe.com/
Follow the Camera RAW 6.4 RC link and eventually you'll get a link to download the DNG Converter 6.4 RC.
The Camera RAW 6.4 RC installer will only run if you have Photoshop, not Elements, so you can't use that, yet, but you can use the DNG Converter.
Because the DNG Converter and Camera RAW 6.4 are in beta status there could be differences in how the RAW photos look compared to when you get the released version of ACR 6.4 but probably not too much difference.

Similar Messages

  • Had to reload cs3 to my laptop. now I can not open cr2 files from my canon d50

    I think I am thick. I have tried a number of ways but to no avail. I need a step by step tutorial.

    It sounds like you put the zip folder into
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS3\File Formats
    Go to the above folder and move everything out of that folder onto your desktop, then right click on the Camera_Raw_4_6.zip
    and choose Extract All.
    Then when the Extract dialog comes up check Show extracted files when complete
    Then in the next dialog that comes up, right click on the Camera Raw .8bi and choose Copy
    Then go to
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS3\File Formats
    and right click in an empty space and choose Paste
    Now hopefully when you start or restart photoshop cs3, your files will open.

  • Can not open RAW-Files from Nikon D4 in Photoshop cc

    hi. i can not open RAW-Files from Nikon D4 in Photoshop cc. (Camera RAW 6.7) can you help please?

    ACR 6.7 would be for an older product, PS-CS5 or PSE10 or PRE10.
    What does Help / About Plug-ins… / Camera Raw… show in PS-CC for a version for ACR and is there more than one version of ACR in the Help / About Plug-in list.  Help / About Plug-in is what I’d do on Windows; I’m not sure if the menu path is the same on a Mac or not.

  • I can not open NEF files from Nikon Df

    I can not open NEF files from Nikon Df
    Buongiorno a tutti,
    qualcuno mi può essere di aiuto per utilizzare Camera RAW con i file NEF della nuova Nikon Df ?
    Grazie infinite .
    Hello everyone,
    someone can help me to use Camera RAW NEF files with the new Nikon Df?
    Thank you very much.

    This thread has instructions for importing Nikon Df raw files in Lr5.3RC (by making them look like Nikon D4 raw files):
    http://forums.adobe.com/message/5920044#5920044

  • Can't open RAW files from a Canon 70D

    Can't open RAW files from a Canon 70D with Photoshop Elements 12.  Is there an upgrade / download available.  Current RAW plug in is version 8.0.0.137

    What operating system are you using?
    The newest version of camera raw for pse 12 is version 8.4, which should open the canon 70D files.
    Have you tried Help>Updates from within the pse 12 editor?

  • I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

    I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273

  • Can't open cr2 files from my 5D but can from my 20D

    i just got a new computer (windows vista) and on my old computer i could open cr2 files from both my 20d and my 5d just fine. but now on my new computer i can't open the cr2 raw files from the 5d but can from the 20d. I have photoshop cs2. I am not planning to upgrated to cs3 anytimes soon, do I just need to install a plug in? Please help.

    Kristen,
    No, no, no. The DNG Converter is a stand-alone executable program. You can even put it on your desktop. You would need it only if your camera model is NOT supported by ACR 3.7, which is the latest version you can use with Photoshop CS2.
    In that case, you would use the DNG Converter to convert your raw images to DNG files first and then opening the DNG files in ACR 3.7.
    Now, the ACR 3.7 plug-in has to be installed in the correrct location, which is where the old ACR plug-in resides. You will be replacing that old, obsolete ACR plug-in (while Photoshop is NOT running).
    [The default Photoshop installation comes with and installs that obsolete ACR plug-in.]
    Read the instructions on the download page very carefully, and refer to the FAQs of this forum on the same page where you added this topic.

  • Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi

    I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
    I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
    I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
    The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
    In OS, when the image is selected no preview:
    Lightroom error:
    Bridge, no preview:
    Photoshop error:
    Ideas, suggestions?
    66 views on this discussion so far and no replies...
    Please help.
    Thanks in advance,
    Arthur

    Something appears to be wrong with your files.
    Are most of your images approx. 3.7 MB?
    This is very small for a 12 MP image.
    If you go back to the original file on your laptop, what is the file size?
    Also the fact that the Mac OS is not showing the preview is unusual.
    Perhaps these files got corrupted when they were moved to your new computer.
    Can you open these files OK on your old laptop?
    Is the OS showing the previews on your old laptop?
    Also compare the file sizes between old and new computer.
    Have you tried repairing your permissions?
    Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
    Good Luck!

  • Need camera raw 6.7 so I can open CR2 files from my Canon 5d mark iii

    I purchase PS CS5 and says my camera is compatible and it will not open up the CR2 camera raw files from my canon 5D Mark iii camera. I used it in the past, and up graded my hard drive to MAC OSX 10.9, purchased new PS CS5 and Adobe will not update the Camera Raw 6 to 6.7 which using my files...

    Hi redtulips54,
    There you go. Download the one you need, depending on your operating system.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Hope that Helps.
    Cheers!
    ~ Arpit

  • Downloaded adobe photoshop elements 10 editor from Mac app store onto my mac book pro, set i photo preferences to APE 10 Editor, but can not open any files from my library, error saying " program error". What else do I need to do?

    Have downloaded Adobe Photoshop Elements 10 Editor from the Mac App Store onto my Mac Book Pro, set i photo preferences to Adobe PSE 10 editor, but when I try to open a file from my photo library, the following message appears: "could not complete your request because of a program error". What can I do to resolve this issue?

    Hi..
    Post your topic in the iPhoto community here. That way you can get feedback from iPhoto users.
    This community is primairly for issues with the App Store.

  • Can't import Cr2 files from my Canon 60D into LR5

    I took a trip to New Zealand and I shot in Raw +low res jpeg.  I uploaded the files to my little Asus tablet I had purchased right before my trip because I was running out of SD cards.  This is the only place I have quite a few images as I formatted the cards to reuse them.  I have transferred them to an external hard drive with no problem and then to my main PC which has LR5.  It doesn't seem to 'see them' when I try to import.  Any ideas? I tried opening one of the images directly into Photoshop CS6 and then I saved it as a jpeg file - then I was able to import it into LR, but I have 100's of photos and not sure I can do a bunch at a time, but at least all is not lost.  Thanks for any help anyone can offer.

    When you say "grayed out" do you mean a gray area instead of a thumbnail as can happen when the monitor profile is bad or do you mean the thumbnail is dim and washed out to indicate an image that cannot be selected as they would be if they had already been imported into the catalog?
    You talk about shooting RAW+(low-res)JPG but no where to you talk about what happened to those JPGs.   Did the JPGs remain on the tablet when you transferred things to the external hard drive prior to attempting to import or are they on the external hard-drive, too?  Are you importing them along with the raw files, but have Treat RAW+JPG as separate files unchecked, so the JPGs have become the sidecar file to the CR2s?   The size of the companion JPGs shouldn't matter as far as what happens with the CR2 files when you work with them.  They take up space on the card and the tablet memory but I guess you wanted them so you could review your pictures on the tablet since the CR2 files are not processable on the tablet so wouldn't be visible.
    Have you imported your camera's raw files into LR before?  What is different this time from previous times, the source of the files, or the fact the files were on a tablet, or that there were companion JPGs, or the type of import is different because you usually import direct from the card?   What type of import did you do, Add, because the files are supposed to stay on the external drive as the normal place for your images, or Move (or Copy) because the photos end up on an internal drive, normally?
    When you open the JPGs in Photoshop, do they first open in Camera Raw or do you not see the ACR plug-in and they open straight in Photoshop?
    When you say the saved JPGs out of Photoshop are 1/5th the size, do you mean pixel-dimensions size where a normal 4000x3000 image becomes 800x600, or that the file-on-disk size is of the CR2 files is 25MB but the JPG is only 5MB on disk?  Images don't just become smaller in pixel dimensions without a resize happening, and it is perfectly normal for a JPG file to be much smaller on disk than the original raw file, since JPG files use lossy compression. 
    The imprecision of terms "grayed out" and "size" is confusing to me.  I worry that somehow you don't have any CR2 files, only small JPGs, or that the CR2 files became corrupted because they were put on the tablet since you've never done that before.  Can you provide an example CR2 file, uploading to www.dropbox.com and post a public download link, here--a file that you don't mind others seeing, just so it can be checked for corruption?

  • Will PSE 13 open CR2 Files from my Canon 7D?

    I've just upgraded my camera from a 550d to a 7D Mk II and the new CR2 files will not open in PSE 10.  Before I upgrade to PSE13 I want to check that the files will open.  Any advise gratefully received.
    Thanks
    Bob

    Hi,
    Yes, well it reads mine.
    You can always check it out by downloading the trial version from here
    https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html
    Once you have downloaded and installed PSE 13, you will need to go to the Help menu and select Updates as you will need the camera raw to be updated.
    Brian

  • Can not open PDF-files from the internet...

    Hi,
    I migrade my data to my new mac. But the old user xxx is now yyy. On the old imac I can download PDF-Files with the mozilla firefox. There was a copy from the pdf at the desktop!
    Now with the new mac mini and the new user, I get an error, because the firefox (safari too) can not oper the folder Users/xxx/Desktop....
    Where can I change this settings to yyy???
    Please help...
    Thanks!
    ULLI

    It sounds like you copied your firefox profile across from your other computer and just need to change the destination for downloaded files. Under Firefox->Preferences, look in the Main tab under downloads where it says "Save files to" and click "Choose" to change the destination directory. That ought to fix it.

  • Bridge can't open CR2 File from 5D Markii

    I'm unable to view RAW/CR 2 image files shot with a Canon 5D Mkii in Bridge. I have no problem with CR 2 files from other cameras just this new one. I can view them on Canon's Browser, so I know the info's there, but I need ot work in Bridge and PS2.
    Is there a RAW upgrade for Bridge?
    Thanks,
    cB

    seeburt wrote:
    I'm using CS2 and the version of Bridge that came with it...1.0.4.6
    Will 5.4 work with CS2
    No, only with CS4.
    If you are serious, you should upgrade to CS4/ACR 5.4 – you'll be amazed!

  • Can not open .doc files from Finder

    I installed Snow Leopard and now I'm having trouble with .doc files. I use Microsoft Office 2004. When I try to open a .doc file directly from the internet or by clicking on it from Finder or desktop, it won't open. Instead I have to go into Word and click open then browse. Any ideas on how to fix this?

    This works only for files that I know have been created in Mac Office 2004, but any other files I download - for instance, from school - will not open in this way. I followed your suggestion, but Word was already the default application used and the "change all" box was unclickable.
    I tried right clicking on the file, going to the "open with" menu, then clicking "other" and selected Word that way. I made sure that "always open with" was checked, but it still didn't help.

Maybe you are looking for