Can not set date and time on a new Apple TV

can not set date and time in a new appletv

Hello lfsalas55,
You may need to verify that TCP port 123 on your router is open and available for use by your Apple TV.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen

Similar Messages

Can not set date and time

i can't not set date and time i live in florida and i am visiting hawaii.Brought my apple tv and airport express , created my own network to watch my apple tv but unable to set date and time on my apple tv.Pleas help.

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

I bought my apple tv in USA and use in Indonesia, but I can't set date and time.

How to set date and time so I can Home sharing with apple tv .

Call the shop in NYC and find out.

HT3180 Can't set date and time on apple tv

I cannot set date and time. Help!

It is having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic (settings - general - network). If on wifi try ethernet. Reboot ATV and router.

Can't set date and time automatically thru Airport Extreme

We have an Airport Extreme that serves as the router for our home network. No computer using the Airport (wirelessly or via ethernet) can set it's date and time automatically. If I bypass the Airport and hook a computer directly to the ISP's modem via ethernet, date and time works fine. The Airport is up to date (v7.4.2) This has been a problem for quite a while now and it doesn't matter what OS is used (current is 10.6). I don't have any firewalls set up that I know of.
Any help or advice would be greatly appreciated.
dhf

+No computer using the Airport (wirelessly or via ethernet) can set it's date and time automatically.+
It's done with AirPort Utility, not your computer.
Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Then click the Base Station tab below the icons
There is a check box +Set Time Automatically+ and choose a region and Time Zone
Click Update to save your changes

Can't set date and time, stuck on that screen. Also don't have ANY apps at all.

Whats up Apple? My Apple TV is only a few months old. Can't set the date and time and now have ZERO apps. All that shows is the "Computer" and "Settings" after staring at that spinning wheel for an hour and finally clicking menu.

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

I lose my internet connection on my ATV2 with the last update the network works but the ATV´2 can´t set Date and Time

Since friday I update my ATV 2 trough my Mac on that day, the device show me that it is connect to the network, all my anothers devices are working well with my wifi connection, I made some test, enter to my router config as another forums talkking about of the same trouble with the ATV, I´m so fustated than after made everythig that is possible to do I can´t fix the trouble, I can´t don´t back to the previus ATV version, when I try to enter to the Home Sharing or Itunes store the message are that I not conected to the internet and I have to setup date and time, I check the data and time on my dlink router and everything are ok there, ANY IDEA I´M TIRED to try to fix it all the day, reading blog making resets and everything possible, maybe I jump some stage.
By the way the Aiplay is working on my network.
Best Regards

Ok thanks again
Yes I try Ethernet cable from the ATV to the router
I check the signal using the istumbler and the internet speed that I have on my anothere devices likes iphone, Ipad and my MacBook Pro the levelo istrubler screen is high.
This is something that I doesn´t ry how I can configurate the port 123 on my router that is a DLINK, I set the time on my router tool page 192.168.0.1 and unchek the firewall as recomended on anothers old post.

System Preferences can't set date and time and other odd behaviour

I have a 2008 Macbook Air, which is beginning to show signs of age, but now appears to have taken on a terminal problem. I can't set the date and time in the system preferences, even when connected to the internet - the pane just comes up as faded out and I am unable to do anything. The problem started after I accidentally allowed the battery to run down without having shut down the computer and it automatically assumed a date of 1 Jan 2001. I am unable to perform any updates on the machine until the issue is resolved, according to software update.
Other strange things that have happened are that the trackpad no longer responds to the 'tap to click' function or 'two finger' click. In system preferences, I cannot edit energy saver, network (advanced) or account settings - attempting to do so brings up more faded panels or an error message after failure to load.
Has anyone seen similiar behaviour on their mac or have suggestions as how I might resolve the problem?
Thanks!

If this is recent, what has changed since the last time D&T worked correctly?
I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " Using iPhone " where it may get a more rapid response from your fellow users.
ÇÇÇ

HT1600 appleTV not setting date and time

cause of why apple TV not able to identify itunes to set date & time, gen 2 ?

Morning bmrug,
Thanks for using Apple Support Communities.
make sure your router isnt blocking ports.
For more information on this, take a look at this article:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/ht2463
TCP port 123 is used to communicate with a network time server.
Best of luck,
Mario

HT1595 Stuck on Setting Date and Time

Will not set Date and Time (just keeps trying).

I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
https://discussions.apple.com/message/20008613#20008613
In case that message disappears, here's my translation:
1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
2. Download the older 5.0.2 firmware from Apple here:
5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
4. In the dialog that opens select the firmware that you downloaded.
5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

"RT Set date and time" does not set seconds in UTC mode

Hallo,
I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
Can anybody help me with that problem???
Thanks
Florian
Solved!
Go to Solution.

Hi Andreas,
well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
I suspect that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
Thanks so far
Florian

Is there a way to force time can only be set to "Set date and time automatically"?

I am using OS X 10.9 .5 , and here is what I want to do.
When you click "Open Date & Time Preference", you will find an option that states "Set date and time automatically". And of course you can chose not to do that, and adjust the time.
But can you remove that option? So your OS X is forced to chose the mode "Set date and time automatically" no matter what you do? (aka you can't adjust the time by yourself now.)
Is that possible? Is there an app that can achieve this goal or can you do that at Terminal?
Thanks in advance.

There's a similar setting in iPhoto preferences (in iLife '08 versions and later), or in Image Capture preferences (if you're using iLife '06 or earlier). Check those settings as well.

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

Welcome to the Apple Community.
Along with the things you have tried, some have had success setting the location to the US.

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

How do I change the "Set Date and Time Automatically" server

Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?

sig wrote:
The menu has a drop down. But if you know the address of another time server I would think you can type it in.
Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
charlie

Can not set date and time on a new Apple TV

Similar Messages

Maybe you are looking for