Can only see text and image outlines

I am new and got stuck!
When I run the fla, it runs fine. However I have hit some setting and all I can see is the texts and image outlines...
Here are some screen shots:
This is what it looks like when i run it:
Please help! its probably the most fundamental thing ever but I am stuck and it is hot and I'm frustrated. Thank-you

Your timeline is set to outline view. At the top of the timeline, in the section where the names of each layer are shown, there are three icons: an eye, a lock and a box. Click on the box icon to switch between outline and normal view.

Similar Messages

HT1595 Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

I just had this issue. Go into settings and reset the Apple TV after the firmware update. (note just "reset settings" and NOT back to factory settings)

HT1551 Apple TV - can only see Computers and Settings options (no internet)

sine the apple2 tv software was updated last week I can only see options for computers and settings
whilst my internet connection is clearly working, I cannot access youtube or internet radio as there is no internet option
any ideas how to fix this pls?

My ATV3 has worked beautifully for the last week. We woke up this morning to find this problem. Nothing weird happened over night - my entire network has been up all night with no resets or anything strange.
The ATV3 accessing all of my Home Sharing content, so I know the network is fine (wired). Tried resetting and cycling power. Tried changing locations/setting language. Nothing. I even tried resetting my DSL Router, but to no avail.
I've got nothing fancy going on with my location, short of being in Canada.
Update: Oh, and I have a 2nd ATV3 downstairs, also on a wired connection. Just found out that it, too, is exhibiting the same error. Although, I'd left it in 'iTunes Match' last night and the first thing I saw when I started it up was "Error: iTunes is Unavailable. Please try again later". Plugged my old Popcorn Hour in and it, at least, is working fine.

I can only see Inbox and not any other boxes (eg outbox, drafts, sent...)

Thunderbird has been running OK for months but now I can only see my outbox. I cannot see any way to see anything else! I'd really like to get back to the display that shows the whole list of 'boxes' in, out, etc, and my custom name boxes. These usually appear in a column on the left. But I am stuck in Inbox. I can send mails OK. In fact I can access
Get Mail, Write, Chat (not used), Address Book, and Quick Filter... and there's the search box. I could send a screen shot if you had a way for me to send it.
I feel there's a button somewhere that could sort out my problem... but I've tried everything I can think of.
So for now Thunderbird is of little use :( I hope you can help.
Bob

Please post a screenshot.
http://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem

Do i have a bad iphone? can only see movies and no songs, then vice versa!?

How can i fix this? sometimes i can only see the 1 movie i put in, and sometimes i can only see the songs i put in, and no movies at all.. but they are deffenetly in there....
anyone? what should i do?
christiaan

Maybe a syncing issue or a software problem....Have you tried Restoring your iPhone ?
To Restore follow the steps here : http://docs.info.apple.com/article.html?artnum=305744

IOS 7 downloaded fine but I can't back up restored. Tried 3 times. Tried turning off iCloud. Now I can only receive texts and phone messages. I cannot make calls, retrieve phone messages or send any texts. When I try I just get a blank screen. HELP

I initially tried to do this at 11:39pm last night. I cleaned up my apps, backed up to my computer and then took the plunge. It downloaded fine, everything went ok until I tried to restore backup. I received a message that there was an error in iTunes and iPhone could not be restored. I tried this three times giving up at 2:00 am. I tried again at 7:30am. No fix. Now I can open up phone and browse in safari. I can get notifications that a text was received or a phone message left but I can't receive or make phone calls, retrieve phone messages, or access any text features. Also I have NO purchased apps. I use my phone got work and this has ruined my day - please help!!

I would start with going to O2 with the phone and making sure it's set up properly - maybe the SIM they gave you isn't quite right or their network isn't acknowleding it like it should.
Seeing as you've tried restoring to factory settings and resetting network settings, I'm assuming you've tried restoring the phone as new, just to see if that helped at all. If that didn't help, you definitely need to get in touch with O2 and work things out with them.
~Lyssa

Can only see first and last frame of clip in the timeline HELP PLEASE

Hi, my first time and I did look for an answer, but can't find one. I have premiere elements 4 and I am trying out ver. 9. In ver. 4 the clips in the timelin shows all the frames, but in ver. 9 it only shows the first and last frame of the clips. Is there any way to make all the frames show. By "all the frames", I mean the clips fill with frames.I liked to see all the frames in the timeline, it is easier for me to select and trim the bits out.
My specs are Core 2 Duo 6750, Nvidia 8600GTS, 4G Ram, Vista Home Premium. 3 HDD 3TB.
Thank you for answering
Werner

As for the GUI, PrE had one more like PrPro (the early versions), up through PrE 3. With PrE 4, they streamlined the GUI (and some of the operation), and went with the "dark look." PrPro went in that direction starting with CS3, and now, the two programs' GUI looks more alike - darker. Personally, I like PrPro 2.0's brighter GUI. Now, one can alter the brightness, but the contrast can work against doing much of that - give me the lighter GUI....
The look of PrE 4 thru PrE 9 is very similar, though things have moved about some. Still the look is similar. Same for PrPro CS 3 through CS 5.5.
As for the trial, things have changed in PrPro, as of CS 5.5. Once, the PrPro trial was very crippled, but had no watermark. No more. No crippling, and still no watermark. The trial for PrE is far less crippled, but does have the watermark. We do not know what changes might be coming with the trial of PrE10. We will just have to wait and see. One great option that Adobe offers is the 30-day, money-back guarantee. If you buy Premiere (either flavor), and use it for 29 days, but do not like it, then you return it for your money back. This is the full-paid version (both flavors) with nothing crippled, and no watermark. Not that many companies make such an offer. Basically, on can use the trial for 30 days, to see some of the powers of the program, and then buy it, and try it fully for another 29 days. If not completely satisfied, they get their money back - essentially a 59 day trial.
Were I doing AVCHD, I would definitely look at buying PrE 9, and giving it a 29 day shakedown. The only caveat is that AVCHD requires a lot of computer "horsepower," and not all computers (especially if more than a year, or so old) are up to that task. I find it amazing that a consumer format, like AVCHD, requires more computer power to process, than most professional formats, until one gets up to, say RED 2K/4K. However, that is the nature of the H.264 CODEC, and by that, I mean all H.264, not just the AVCHD version.
Good luck and happy editing,
Hunt

When I open 'new' in Yahoo to write a new mail, the page does not show tabs from bold through to indentation. Can only see font and font size tabs

The only tabs on display are '''font''' and '''font size''' - nothing else. Tabs from bold to indentation are not visible.
Moreover the arrows to go '''up''' and '''down''' on emails are 'invisible' too.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

I was able to print my month view from ical, but no longer is "month" an option. I can only see list and day. Please advise!

Just curious...about two weeks ago I was able to print my ical calendar in month view. For some reason, "month view" is no longer an option in print mode. The only two options I have are day or list. Not sure how to print in month view now or retreive that back. Please advise : )

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

My ipad mail is synced to my iMac mail account. On iPad, I can only see my inbox and sent messages. I can't see any of the folders I have created on my iMac. How do I do that? Probably a dumb question, but I know there's a lot of smart people out there!

My iPad mail is synced to my private email account, which I organise on my iMac. On iPad, I can only see inbox and sent messages folders, not any of the other folders in my email account I have created on my iMac. How do I get iPad to show my other folders? Probably a dumb question, but I know there's a lot of smart people out there.

If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

Text and images in the same component?

Ok... a lil help please :
into what component can i put text and images at the same time
as in...
example, what component could contain data like this :
Hello this is me <imageofmyself> and this is my house <imageofmyhouse>... bye all !
thanks in advance,
Jonathan, a.k.a. Kyraz

You could use a Swing HTMLPANE or draw it all onto a
BufferedImage and display that (code posted under 2D graphics thread).
MArk

The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.

When I click "edit" to manage content on a web page, I see code instead of text and images. How can I fix this?

I edit content on www.fomh.org. Until recently, I could sign in as administrator, click "edit" in the editable area of a web page, and proceed to update text and images. I have been using Firefox to do this for several years. Now when I attempt to do this, I see all the html code in the editable area instead of the text and images.
I am using Mac OS 10.6.8

What is the content of that window?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

All of sudden my iphone 4s any picture I take outside I cannot forward via email or text and I can only see it, in the camera roll. When I try to open the picture full screen it is blank. Anyone have any ideas to fix it?

all of sudden my iphone 4s any picture I take outside I cannot forward via email or text and I can only see it, in the camera roll. When I try to open the picture full screen it is blank. Anyone have any ideas to fix it?

Close out of the camera app, double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then check your camera roll again.

When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Can only see text and image outlines

Similar Messages

Maybe you are looking for