Can SAP Kernel 640 (linked OCI_9.2) run Ora DB 9.2 via instant client 10g ?

Hello,
One of our old system runs a SAP Kernel 640 OCI_920.
DB server runs Oracle 9.2
We would like to backup it with RMAN to take advantage of backup as saveset with disk_copy_cmd = rman_set
So according to OSS 1101530, we should run at least BrTools 7.00 patch 30 or BRTools 7.10 patch 5.
OSS 849483 and 1060539 state that those Br*Tools can be run with a database server Oracle 9.2 if an Oracle instant client 10g is installed on the Database server.
I wonder if it is possible without upgrading the DB Server to oracle 10g
1) Can SAP Kernel 640 (linked OCI_9.2) run Ora DB 9.2 via instant client 10g ?
2) Or should we go to an SAP Kernel 640_EX2 ?
3) If so, shouldn't Oracle server be upgraded to 10g beforehand ?
I will try to get some clue in the product availibility matrix, but if you already have some piece of information about it, please just shoot !
Thx in advance for you time
Edited by: Emmanuel TCHENG on Mar 30, 2010 12:25 PM

Hi,
Check SAP Note 521230 - FAQ: Client software 9i or lower on UNIX
Thanks
Sunny

Similar Messages

  • Obtaining an ODBC link to an Oracle 9.2 database via Instant Client

    Hi
    Justin Cave, on one of your other forums, has been assisting but as of yet we have not suceeded. He suggested that this forum may be of help.
    We are trying to find a way of linking a Microsoft Access database to an Oracle 9.2 database but as of yet have not suceeded can you please help?
    The database server we are trying to connect to has a full installation of Oracle 9.2. We have a limited number of workstations that have a fully licensed Oracle client installation (required to use our PDM system). On these workstations we can successfully configure an ODBC connection to the Oracle database on the server and link tables in MS Access. However the majority of our PCs do not have any Oracle client installed, nor do we have any further Oracle client licenses to install with (we do have the installation media for both the server and client software).
    We have attempted to use Orcale Instant Client (and ODBC addon) believing that we do not need licenses for this, at both the latest version 11.1.0.70 and at the earliest version we could find 10.1.0.5 but neither was successful in making an ODBC connection to the Oracle 9.2 database. Is this because we are using the wrong version of the Instant Client or is it just because we cannot configure it correctly? Are we correct in believing that we do not need to purchase licenses for Instant Client?
    If we are way off the mark, what can you suggest?
    Many thanks in advance.
    Kevin (and co)

    Hi Laurenz,
    Firstly, thank you for your prompt response.
    Secondly, in answer to some of your questions:
    1. How did you install Instant Client? By extracting the downloaded package to a directory on the local HDD (C:) maintaining the subfolder structure.
    2. What environment variables did you set? We set TNS_ADMIN using the System Properties Dialog (Environment Variables) to be the folder where Instant Client was installed to (extracted to) i.e. C:\InstantClient_11_1. We also amended the PATH to include this folder using a command prompt and typing PATH=%PATH%;C:\InstantClient_11_1. This works but only until the next reboot when the PATH reverts to the previous value.
    3. Did you run the odbc_install script to install the ODBC driver? Yes, we extracted the ODBC add-on into the same folder and ran the ODBC_install.exe script successfully.
    4. Does the driver show up in the list of drivers on your system? Yes.
    5. Do you get any error messages? When we use v11.1.0.70 and hit the test connection button within ODBC admin, we get a noticiable delay followed by 'Unable to connect... TNS could not resolve the connect identifier'. When we use v10.1.0.5 we cannot even complete the System DSN ODBC configuration.
    Our next questions are as follows:
    1. Is the TNS_ADMIN environment variable case sensitive and should it have a \ after the folder name?
    2. How do we amend the PATH permanently, so it does not revert following reboot?
    3. What part does tnsnames.ora play in the configuration. This file currently resides deep within the folder structure on the database server. Should we be copying it to the local C: and placing it in the same folder as Instant Client?
    Once again, many thanks for your help.
    Yours,
    Kevin (and co)

  • Can I tether 9 PowerMac g5's running osx 10.5.6 via FireWire to act as one giant server?

    Hello, I currently have 9 PoweMac G5's and one 1st generation Mac Pro laying around, all running OS X 10.5.8 and I wanted to know I it would be possible to install OS X server on all of them and tether them together via FireWire to run as one server.

    It depends on what you mean by tether and one giant server? One Giant Server is a question that potentially covers a lot of ground and unless you give more specifics on what your thinking is it's not one that's easily answered.
    However using firewire allows connectivity over TCP/IP or Target Disk Mode (TDM). As you know TCP/IP is a network protocol and TDM offers functionality for using the connected computer as an externally connected hard drive and not much else on the active mac the other macs are connected to. I suppose you could 'design' a network that has all 10 macs connected and 'clustered' in a way that harnasses processing power on all of them (think SETI program) to do the limited specific tasks OSX Server supports. Anything more would be dependant on your skills. But then why would you use firewire when ethernet would be the more obvious and faster thing to use anyway.
    I think the 'best' you can do to run them as one giant server over firewire is to TDM them to your most powerful mac (the MacPro) and simply share the hard drives. But why would you do that? It would be more efficient and cost effective to simply load the four drives bays on your MacPro with the largest drives it supports (2TB or 3TB) and use those instead.
    Either way all you'd have would be a single file server and not much else.

  • SAP R/3 ENTERPRISE 4.7 / ORACLE 9i / kernel 640 for AIX 6.1

    Hello,
    We plan to migrate our SAP systems from AIX 5.3 to AIX 6.1.
    We are currently running a SAP R/3 ENTERPRISE 4.7 on ORACLE 9i with a 640 kernel 64 bits UC.
    I would like to know if AIX 6.1 is validated for our system (SAP 4.7, ORCALE 9i and kernel 640).
    Thanks.

    I would like to know if AIX 6.1 is validated for our system (SAP 4.7, ORCALE 9i and kernel 640).
    Read
    Note 1137862 - Using SAP systems with AIX 6.1
    Note 1087498 - Support für AIX 6.1
    The first note will tell you the necessary TL/SP you need to install. The second note tells you about the minimum kernel version.
    What does not work is Oracle 9.2 --> not supported under AIX 6.1 (http://service.sap.com/pam or Oracle Metalink 169706.1).
    Since Oracle 9.2 is out of support already I highly suggest upgrading to Oracle 10.2.0.4 and using the latest 640_EX2 kernel.
    Markus

  • Can SAP run the depreciation for closed Period and posting to diff month?

    My client forgot to run the depreciation for Jan 2011, and now the Jan period has been closed and report also done.
    My solution was to re-open the Jan and does the depreciation, once completed reclassify Jan depreciation posting to Feb 2011 manually.
    I am just wandering whether SAP can handle this different way.
    Can SAP performs Jan (Closed Period) depreciation and post to Feb period automatically or any other suggestions?
    Cheers

    Hi
    Yes, you can do that
    Follow this thread... Unable to post depreciation- Error AA730
    Using ABF1, you can do it
    Br, Ajay M

  • )How can we schedule the info package daily run at 6 AM, with out useing in

    Hi
       Can any one explain 1) what is information broadcasting &how can we use this.
    2)What are the settings we have to do when we use the charts in WAD's
    3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
    Thanks
    Bharath

    Hi,
      Information broadcaster :
          you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
    have a look at the below link.
         http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
    Infopackage scheduling:
         you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
    Regards,
    Siva.

  • Missing IDES ECC5 installation disk for SAP Kernel - MaxDB Version

    Hi,
    Our HQ sent us installation disks for IDES ECC5.  We copied them all onto our server and started installation.  The system is now informing us that it can't find the SAP kernel information.
    I can only assume that we're missing one of the installation disks.
    We're desperate to get this installed and it will take another week for our HQ to send through another disk.  Does anyone know whether we can download this from somewhere?  We have had a look on SAP marketplace but you only seem to be able to download the kernel for Oracle, MSSQL and DB2....no MaxDB.
    Additionally, if there is somewhere in Asia we can download this, then that would be better as we are having internet problems when connecting to Europe and the US.
    Thanks in advance!
    Tristan

    Hello Tristan,
    This is not the correct forum to post your question.
    You was not asked about the database(MAXDB) kernel software.
    You need SAP kernel software
    -> Review the installation guides at service.sap.com/instguides ->
    mySAP Business Suite Applications -> mySAP ERP -> mySAP ERP 2004
    -> SAP ECC 5.0 ->
      Installation Guides of SAP ECC 5.0 SR1
    -> < Please see the steps 'How to Proceed' > ->
    -> MySQL MaxDB
    < Part I: Planning and Preparation
      Part II: Installation and Post-Installation  >
    -> select the documents for the OS of your server.
    And the document from the 'Part I: Planning and Preparation' you will get information that you need the SAP kernel CD & & what is the minimum required version & the reference to the location at the SAP Marketplace to download it, if you don't have the required SAP kernel CD.
    < You could download the CD from service.sap.com/installations ->
    Entry by applicataion group ->
    Installations and Upgrades -> SAP NetWeaver -> SAP NETWEAVER->
    SAP NETWEAVER 04 ->
    Installation and Upgrade ->
    < OS> -> < database > -> CD 'SAP Kernel ... <database><OS>.
    SAP kernel software is database, platform, Unicode specific.   >
    In the 'Part II: Installation and Post-Installation' document you will find the the list of the required DVDs for the SAP system-ABAP installation.
    -> Are you running the installation of the the 'Central Instance', 'Dialog Instance' or 'Database instance' ?
    For the 'Database instance' Installation you need:
    SAP Installation Master DVD
    SAP Kernel DVD
    RDBMS DVD
    SAP Export DVD
    -> What CD/DVD do you have for the installation?
    <  You could download the CDs from service.sap.com/installations ->
    Entry by applicataion group ->
    Installations and Upgrades -> Entry by Application Group
    -> SAP Application Components -> SAP ERP-> SAP ERP 2004 -> Installation and Upgrade -> <OS> ->SAP DB  >
    You could also order the CD, if you have problems with download from the SAP Marketplace.
    Thank you and best regards, Natalia Khlopina
    PS: SAP Note 19466 will give you information about download of SAP Kernel Patches.
    Message was edited by:
            Natalia Khlopina

  • SAP Kernel release - Difference between SM51 and System- Status ?

    Dear SDN colleagues,
    I am a ABAP developer, and have been told by our Basis department that our SAP Kernel is 640.
    When I check the following, I get different values:
    1) System -> Status : SAP_BASIS is 620
    2) Transaction SM51 -> Release Notes: I see SAP R/3 Kernel              640_REL
    Can anyone explain why there is a difference in these informations? (and which is the correct one !)
    Thanks in advance.
    Best regards,
    Jodie

    Hello Jodie,
    First of all there is nothing to be "implemented" as per the note.
    Additionally the poor basis guy is saying the correct thing. Check this part:
    Solution
    The changes are activated with the following patch levels:
    4.6D : 1495
    6.20 : 764
    The paging administration was enhanced.
    The error is no longer passed on to other sessions and the trace outputs to determine the error cause have been improved.
    The patch levels mentioned are kernel patch levels and have nothing to do with your SAP_BASIS release.Since your kernel is 640 this note is no longer applicable.  In my opinion you need to dig for some other note.
    Regards.
    Ruchit.

  • Latest SAP Kernel

    I'm having a problem at Solution Manager and I have to download the latest kernel, accordin to SAP Consultant said: "I see from the attachment that you are currently running kernel 701 withpatch number 117, please see the following note in reation to this
    defective kernel patch and update accordingly thanks.
    - 1555682 Defective stack kernel 7.00 SP23, 7.01 SP08, 7.02 S
    To obtain the latest kernel patches see note 19466."
    I read the note 19466 but I don't know how to identify what is the latest kernel patch for my environment.
    How can I detect this?
    Regards

    Hello,
    Please go to service Marketplace
    http://service.sap.com/patches
    Browse Our Download Catelog
    Additional Components
    SAP KERNEL 701 64-Bit Unicode
    Select your Server OS
    #database independent
    Then you need to:
    first download the latest SAPEXE* and SAPEXEDB* files
    uncar them in a temp folder
    then download disp+work and TP packages ( latest ones ) and uncar them
    in the same folder
    You will see the for TP and disp+work the patch levels are higher than
    117
    This is how you get the files to update your SAP Kernel
    Regards,
    Paul

  • Upgrade from R/3 4.7 (Kernel 640 non unicode)

    Greetings
    In our company we are planning a major upgrade from R/3 Enterprise 4.7 EXT200 (Kernel 640) over Windows 2008 to the latest release available, the thing is i am a little bit confused about what I should suggest since I havenu2019t done much u201Cadvancedu201D stuff besides system copy and ECC installations and some concepts are still unclear to me, like what netweaver means for example.
    This is our scenario, we have a R/3 Enterprise 4.7 Ext2.00 (Kernel 640 non unicode) system with Oracle 10.2.0.4 over Windows 2008 SP2 x64 with Microsoft Failover Clustering (DB and App server per separate)
    Since thereu2019s no java instance Iu2019m guessing I need to do an upgrade to ECC 6.0 Ehp5 ABAP Only and then do a Java Instance install right?
    Whatu2019s the difference between ERP 6.0 EhP5 and Netweaver 7.0 EhP1? Can anyone clear some of this concepts to me?
    I thank you in advance for all your kind replies
    BRu2019

    This is our scenario, we have a R/3 Enterprise 4.7 Ext2.00 (Kernel 640 non unicode) system with Oracle 10.2.0.4 over Windows 2008 SP2 x64 with Microsoft Failover Clustering (DB and App server per separate)
    You need to Upgrade SAP R/3 4.7 to ECC (EHP5 or EHP4) whatever version you would like to go for and Oracle to 11G as oracle 10 has been in extended maintenance support
    Since thereu2019s no java instance Iu2019m guessing I need to do an upgrade to ECC 6.0 Ehp5 ABAP Only and then do a Java Instance install right?
    You don't have to install Java instance, until you have a requirement. If you have other Java system's you can use those systems for ADS and others
    Whatu2019s the difference between ERP 6.0 EhP5 and Netweaver 7.0 EhP1? Can anyone clear some of this concepts to me?
    *SAP Netweaver is the technology platfrom for all SAP-Based Application, From SAP Netweaver 2004 onwards all the SAP present and future SAP Applications based on Netweaver.
    Netweaver has different stacks as follows.
    1. People Integration ( Ex: EP, SAP Mobile)
    2. Information Integration ( Ex: BI , MDM)
    3. Process Integration ( EX: XI )
    4. Application Platform (Ex: ABAB & Java engine)
    ECC6 is an application component, which will work on with the help of this Technology Platfrom -
    formerly SAP Netweaver 2004s and now it is SAP Netweaver 7 which comes with Enhancement packages now*
    Regards,
    Arjun

  • Not able to increase SAP kernel release 6.40 patch level from 43 to 71

    Hi Guru's,
    I have to update SAP kernel release 6.40 patch level from 43 to 71 but not able to do.I am running solution manager 3.2 on Oracle 9i and Win-2003 OS.
    Please provide the solutions .
    I have downloaded kernel patch from Path at Service matket place ---<b>Support Packages and Patches" SAP Technology Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 3.2" Entry by Component" SAP Solution Manager-SAP KERNEL 6.40 32-BIT UNICODE-Windows Server on IA32 32bit-ORACLE-
    SAR SAPEXEDB_71-20000254.SAR Kernel Part II (for Basis 640/620)  71</b>
    I followed following Steps:
    1. Copied the patch into a temporary directory on system.
    2. Unpacked the downloded SAPEXEDB_71-20000254.SAR Kernel Part II (for Basis 640/620)  71 patch .
    3. Stoped the SAP System using MMC.
    4. Saved the kernel directory by backup or by copying into a separate backup directory. (\usr\sap\<SAPSID>\sys\exe\run)
    5. Re-started the server.
    After logging again in SAP client 000 on checking found server patch level coming same as previous one .
    Its not got updated and due to this in Tcode- <b>SPAM</b> I am getting error message :<b>'The OCS package SAPKITL318 requires a kernel with Release 640 and patch number 71. The kernel you are currently using has a lower version.'</b>.
    Help!!!!
    Regards
    Gaurav

    Hi Guru's,
    Output for transaction SM51 enclosed below:
    Application server gauravpc1_GSM_00
    SAP R/3 Kernel information
    SAP R/3 Kernel 640_REL
    Database Client Library OCI_920_SHARE
    created in NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
    created on Nov 4 2004 23:42:53
    Support Level 0
    Kernel Patch number 43
    Source ID 0.043
    DBSL Patch No. 172
    ICU Version 2.6.1 Unicode Version 4.0
    libsapu16 Version 2.0023 Nov 4 2004 20:04:27
    Supported environment
    SAP database version
    610 , 620 , 630, 640
    Database ORACLE 9.2.0..
    ORACLE 10.1.0..
    ORACLE 10.2.0..
    Operating system
    Windows NT 5.0, Windows NT 5.1,Windows NT 5.2
    one more thing I have aloso tried to upload Kernel latest patch level 175 using same procedure but that too was not working.
    HELP!!!!!!!!!!!!!
    Regards

  • Mixed SAP kernel versions on application servers

    Hello.
    I'm looking for a Note asserting that mixed versions of the sap kernel on application servers of a single installation are not supported.
    E.g. the Central Instance has kernel Version 185 and application server 221 ....
    Can anybody help me finding an official source?
    Thanks a lot.
       Dino

    Hi,
    What is the purpose of a confirmation for such an obvious fact ?
    Do you want an official confirmation that you can't run unix executables on a windows server ?
    PS : Don't try to dry your cat in the microwave oven !   There is no official OSS note about it !
    Regards,
    Olivier

  • Requirements for using SAP Kernel 7.20_EXT, e.g. with ERP 6.0 EhP 6

    Dear community,
    we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
    You can find more information here:
    Note 1563102 - Linux Requirements for 7.20_EXT kernel
    SAP Product Availability Matrix for SAP NetWeaver 7.0
    Or directly access the PAM for SAP NetWeaver 7.0 EhP 3  (page 4).
    In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
    Best Regards,
    Alexander Hass.

    Dear community,
    we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
    You can find more information here:
    Note 1563102 - Linux Requirements for 7.20_EXT kernel
    SAP Product Availability Matrix for SAP NetWeaver 7.0
    Or directly access the PAM for SAP NetWeaver 7.0 EhP 3  (page 4).
    In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
    Best Regards,
    Alexander Hass.

  • How can I get the link not to override my style sheet formatting?

    I have an html page with text that has a style sheet applied
    to it. When I insert a link into parts of the formatted text, the
    style sheet formatting is lost in the linked text (the text for
    mylars, shapes and number shapes becomes smaller: see code below).
    How can I get the link not to override my style sheet
    formatting?
    Here is the html code I am referring to:
    <span class="bodyheader20pt">Fall into winter's biggest
    celebration with our New Year's Day <a href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=A4&sc=184&PageNumbe r=1"
    style="text-decoration:none">mylars</a>, <a href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&sc=184&PageNumbe r=1"
    style="text-decoration:none">shapes</a>, and 2-0-0-9 <a
    href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&sc=166&PageNumbe r=1"
    style="text-decoration:none">number
    shapes</a>.</span>
    I am using Dreaweaver CS3 on a Mac running OSX
    10.4.11.

    Show us this rule --> bodyheader20pt?
    Also, having this in your three anchor tags -
    style="text-decoration:none" -
    will prevent your anchors from displaying any stylesheet
    style for
    text-decoration.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ellfwar" <[email protected]> wrote in
    message
    news:geqiph$foq$[email protected]..
    >I have an html page with text that has a style sheet
    applied to it. When I
    > insert a link into parts of the formatted text, the
    style sheet formatting
    > is
    > lost in the linked text (the text for mylars, shapes and
    number shapes
    > becomes
    > smaller: see code below).
    >
    > How can I get the link not to override my style sheet
    formatting?
    >
    > Here is the html code I am referring to:
    > <span class="bodyheader20pt">Fall into winter's
    biggest celebration with
    > our
    > New Year's Day <a
    > href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=A4&
    > sc=184&PageNumber=1"
    style="text-decoration:none">mylars</a>, <a
    > href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&
    > sc=184&PageNumber=1"
    style="text-decoration:none">shapes</a>, and 2-0-0-9
    > <a
    > href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&
    > sc=166&PageNumber=1"
    style="text-decoration:none">number
    > shapes</a>.</span>
    >
    > I am using Dreaweaver CS3 on a Mac running OSX 10.4.11.
    >

  • Adding a new server in the menu of SAP GUI 640

    Hello Everybody,
    While adding a new server to the menu of SAP GUI 640 using Server Tab after entering all details like :
    1] SAP System ID
    2] Hostname where message server is running
    3] SAP ROUTER :None
    After filling all the above details and after pressing the Generate List Button I am getting the following error .Please help me to know why this error is coming and suggest a solutio for adding a new server to my SAP GUI 640.But I am able to add a new server using User defined tab but I want to add a new server using Server tab.
    Below is error details which I am getting:
    Error:service'sapmsSBX'unknown
    Wed Jan 09 06:41:13 2008
    Release 640
    Component NI(network interface),version 37
    rc=-3,module ninti.c,line 463
    Detail NiPGetServByName: service 'sapmsSBX' not found.
    Thanks and Regards,
    Ashish Thakkar.

    Hi,
    check etc/services for sapmsSBX entry. If missing - add it (i.e. sapmsSBX      36XX/tcp - where XX is your instance no.)
    Add an extra [Enter] after last line of etc/services.
    Regs,
    FS

Maybe you are looking for

  • BPC as an accounting model in BI

    Hi experts: I am start hardly working on the BPC solution and I have a I huge question. BPC seems to be based on a accounting model. That means that the account is a crucial dimension. What if I would need to build a planning scenario for a analitic

  • How do you double underline in Pages 5.02?

    I cannot seem to find the double underline function in the new version of Pages.  Does anyone know how to do it or where to find it?  Did it go away with this new version?

  • How do I solve this win xp recovery / install problem?

    Hello I have made a backup of the Vista install that comes with the new laptop onto 3 DVDs. Now I'm trying to launch the Toshiba Product Recovery Media (Win XP Pro) Discs to install Win XP instead. The Toshiba Product Recovery Media consists of a 1 C

  • Adobe 8 printing from office 2010

    I am having trouble with Adobe 8. Recently the issues we are having have been increasing rapidly. We have had trouble with 1 machine and formatted it/replaced it 3 times. We are using more and more 64 bit machines and we still run Adobe 8. We have is

  • My phone contact - phone book number - notifications disappear suddenly

    i  bought a q10 before 3 weeks ago , it was working perfectly, till 2 days ago, i was using the browser to check some pic's on Google, while i was browsing the internet stop, i closed it and tried to check my facebook, it couldn't even load, so i tho