Can somebody help me in finding a solution or an explanation to the problem I am currently experiencing as well as others wherein we cannot connect to the iTunes store (iTunes could not connect to the store. An unknown error occurred (0x80096004))?

Can somebody help me in finding a solution or an explanation to the problem I am currently experiencing as well as others wherein we cannot connect to the iTunes store. An error message appears and either says "iTunes could not connect to the store. An unknown error occurred (0x80096004). Make sure your network connection is active and try again" or "iTunes could not connect to the store.Make sure your network connection is active and try again." Despite the fact that my network connection is working quite fine, this problem still persists. I can say that my connection is fine because I can surf the internet and furthermore, I used to connect to the iTunes store just before this incident happened which started from April 17, 2014 and persists until today. I tried to solve the problem by following the troubleshoot procedures given in the support section of this site but it really did not solve the problem. I believe that others are experiencing this situation as well very similar to mine when it comes to the time of occurrence as I have read in the discussions in this site. Even though we have different network connections, operating systems and other specifications, we still experience the same problem, so is there really a problem with our computers or is it with the iTunes? And by the way, my computer works under Windows XP. Thanks a lot. God bless.

Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2

Similar Messages

  • When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later

    When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later
    Can anyone help solve this problem?

    I've done a search on here and haven't found any solutions posted for it for windows computers. You could try posting in the iTunes For Windows forum and see if you get any suggestions in there (are you able to download other items from the store e.g. a free app ?) - I use a Mac, the only things that I could think of to suggest trying is see if you get the same error on a different iTunes library :
    creating and/or opening a different iTunes library : http://support.apple.com/kb/HT1589
    or using a different user account on your computer in case it's a problem with that user account.
    But you may want to try the iTunes For Windows forum first, apart from anything else you are likely to get better help for the above

  • TS3297 When trying to purchase music on my MacBook Pro I got this message: Could not purchase "Wish List". An unknown error occurred (5002) in the iTunes store.

    Trying to purchase music and received this message: Could not purchase "Wish List". An unknown error occurred (5002) in the iTunes store. Try again later. I have tryed multiple times and still keep getting this error message. I have the downloaded the latest iTunes version. What is the answer?

    So you already followed these steps?
    This alert is often the result of an issue with verifying your billing.
    Quit iTunes.
    Open iTunes.
    Test the issue.
    If it persists, sign in to store.apple.com using your iTunes account
    Click on Change account information
    Modify or remove your credit card information.
    Click Continue.
    Test the issue.
    If you have I'd try calling AppleCare back and telling the it is error 5002 and already tried troubleshooting steps as listed in TS3297 and that you have already tried to email iTunes support and have yet to recieve a response.

  • ITunes could not copy [song title] because an unknown error occurred (-54)

    For the past month or so I've been unable to sync it with iTunes. When I do, it starts but after a few hundred songs, I get the error that "itunes could not copy [song title] because an unknown error occurred (-54). When I click OK, it then says "synching" but nothing is actually happening, and the only way to even get my browser working again is to restart my pc. I have deleted the song in question, but it will just do it again with a different song. I have uninstalled and reinstalled iTunes to the most recent version, reset the iPod Touch numerous times, As well as deleting the iTunes files off of my computer and reloading all the muisc to it. To make things more interesting, it does all of this on my laptop pc as well as my desktop. Now. all of this may have started before upgrading the software, but that was the last time in months that I tried to sync it, so there may or not be a correlatoin there.
    Any help is greatly appreciated, and thanks in advance.

    Try:
    https://discussions.apple.com/message/18687758#18687758
    https://discussions.apple.com/message/19573110#19573110
    https://discussions.apple.com/message/20050391#20050391

  • Could not restore 1st gen ipod touch unknown error occurred(2003)

    could not restore 1st gen ipod touch unknown error occurred(2003)

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Could not purchase "Wish List". An unknown error occurred (5002).  There was an error in the iTunes Store.  Please try again later.

    I've reset all my info including reentering cc info.  Have been getting this message all day.  Called Apple support.  They could not help.  Said to contact iTunes support, but I can't seem to get any answers there.  Software is up to date: 10.4.

    So you already followed these steps?
    This alert is often the result of an issue with verifying your billing.
    Quit iTunes.
    Open iTunes.
    Test the issue.
    If it persists, sign in to store.apple.com using your iTunes account
    Click on Change account information
    Modify or remove your credit card information.
    Click Continue.
    Test the issue.
    If you have I'd try calling AppleCare back and telling the it is error 5002 and already tried troubleshooting steps as listed in TS3297 and that you have already tried to email iTunes support and have yet to recieve a response.

  • TS3694 Error message "Itune could not copy 'song' because of an unknown error occured"??

    I purchased a couple of albums from Amazon and downloaded to Itunes. I have done this many times in the past. I can play the songs on Itunes but when I try to upload that music to my Ipod I get an error message "Itunes could not copy "song" to the Ipod because of an unknown error has occured. I have purchased many albums and songs from Amazon and even the Apple store and never had this problem. Has anyone had this happened and was there a fix to be able to upload the music to the Ipod??? Any help would be much appreciated!!

    1.Update your Quicktime
    2.If you have local Admin rights righ click Flash and try "Run as administrator"
    When trying to export a MOV file
    Are you importing a mov file and having trouble to export to swf/mov
    or
    do you mean you have an animtion you want to export to Quicktime?

  • Could Not Purchase in I-Tunes. Unknown Error 1008

    Since the day i downloaded Itunes 9, i can't purchase music. I keep getting:
    Could not purchase "Best Remixes". An unknown error occurred (1008). There was an error in the I-Tunes store, please try again later.
    Anyone have a clue? I have tried contacting Apple 3 times, and they can't do squat. It's really frustrating....

    So you already followed these steps?
    This alert is often the result of an issue with verifying your billing.
    Quit iTunes.
    Open iTunes.
    Test the issue.
    If it persists, sign in to store.apple.com using your iTunes account
    Click on Change account information
    Modify or remove your credit card information.
    Click Continue.
    Test the issue.
    If you have I'd try calling AppleCare back and telling the it is error 5002 and already tried troubleshooting steps as listed in TS3297 and that you have already tried to email iTunes support and have yet to recieve a response.

  • I just recently downloaded iTunes and whenever I try to access the store It says "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80096004)

    I just recently downloaded iTunes and whenever I try to access the store It says "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80096004). I have windows xp and it's running on service pack 2. I have downloaded and redownloaded iTunes many times. I'm getting very frustrated!  Please help!

    I have the same error for Windows Vista.  I read all the community posts and followed the suggested fixes including numerous uninstalls and installs, clearing cache, choosing various SSL TL options, turning off all spyware and nothing has worked.  My internet works fine for all my other programs so not sure what is going on with Itunes.  I will not buy anymore products through
    Apple Itunes.

  • TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

    when attempting a restore,  as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

    Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    Trash the Preference file:
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    from: jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    from Karsten S
    Shorter clips than 1,5 sec might be one of the culptrits
    Bengt cont.
    Set-Up might differ
    • Mac OS - most probably X.7 or more
    • iMovie version - more than iM'11 v. 9.0.4
    Action taken
    • Finalizing project - I never do as I never understood the gain to do so
    • Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
    fps - set
    •I only use PAL (25fps)
    Yours Bengt W

  • HT201413 My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error

    My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error (code 9). Any help?

    Found this thread by searching the forum. I hope it helps.
    https://discussions.apple.com/thread/5471311

  • When trying to share my movie i get a error message The project could not be prepared for publishing because an error occurred. (-108)" pls help

    when trying to share my movie on Imovie i get the following error. "The project could not be prepared for publishing because an error occurred. (-108)"
    any idea why this has happened? How do i rectify this?

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

    This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • The project could not be prepared for publishing because an error occurred.

    I have just loaded iLife 09 on my MAC. I've edited a movie and now want to export it, put it in iTunes, whatever I can do to move it beyond my laptop. No matter what option I choose under Share I get the same error message, "The project could not be prepared for publishing because an error occurred. (-2009)". I can find the error message online, but not the (-2009) error code. I'm also a longtime PC person who has just switched to a MAC. Can anyone help?

    I also am having the exact same problem. iMovie '09. I have tried changing permissions on all sharing folders, exporting to desktop, sharing to iTunes in all size files - and yet still get "Unable to prepare project for publishing. error (-2009).
    Mac OSX version 10.6.2 Snow Leopard

Maybe you are looking for

  • G/L Account Line Items/ Profit Centers/ FBL3N/ F.5D/1KEK/KE5Z/BalanceSheet?

    Hi Experts, Am running FBL3N-G/L Line Item Display, and am trying to get PROFIT CENTERS for Balanace sheet type of accounts, but Its not showing up. But, am getting for Profit Loss accounts. 1) Why its so? 2) Then How to get the PROFIT CENTERS for th

  • No data found error on Form on a Table with report

    Hi Everyone, I'm using Application Express 4.1.0.00.32 on Windows 7. I built a Form on a table with report. Earlier I was using rowid as a passing parameter but then I had to change it to primary key column from report to form. So in the "Fetch row p

  • Configuring an external Monitor for Color Correction?

    I currently have my Mac Book Pro 17in connected by the mini DV port and one USB port to a Mac 30" Cinema Display for editing on FCP7. I use it in a two monitor configuration with my Bin on the laptop screen and the FCP interface on the Cinema display

  • Inserting rows in PL/SQl table

    Hi, I have a PL/SQl table which i populated through bulk collect and now i am trying to loop through the table (actually quite a few nested loops) ... Now inside one of my loops i might need to insert a new row by splitting field in the existing row

  • How to extract latest instance of a report using BO Enterprise SDK?

    Using BO Enterprise SDK how to extract latest instance of report from Crystal Enterprise XIR2?. Can anybody help me with explanation or code? Thanks in advance.