Can someone help me hook up a 2nd monitor to my iMac 2011 ?
i bought an asus 23" hdmi monitor and would like to connect it to my 2011 i5 iMac
i purchased a minidisplay hdmi cable and plugged it all in and the monitor keeps telling me it isn't getting any hdmi input ... the imac doesn't detect it
i have hooked up the same monitor via the same cable to a current model mac min and the monitor works perfectly
i have reset the pram and that didn't help
is there a step that i am missing ? ... is there a checklist somewhere ?
i have done a fair bit of research and have read apple's support on the issue but can't get anywhere with this ?
can thunderbolt ports be tested ? ... do they go bad ?
is it worth getting an dvi connector (i don't need sound) ?
thanks for any help
Hi, what is the rez of that Monitor?
Supports dual simultaneous displays -- 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with adapter).
Does it work on the HDMI port by itself?
Similar Messages
-
Can someone help me to find a temperature probe for the imac's Hard Disc? I'm tired of looking for but I can't find it.
What you are asking isn't clear. Are you saying that you are not getting any temp readout for the drive? What are you using to see the internal temps? If you aren't getting any output from the drive temp sensor, the drive fan should be revving up full speed. Is this happening?
Get Temperature Monitor and post the results
http://www.bresink.com/osx/TemperatureMonitor.html -
... not sure how to enlarge, can someone help?
Apple doesn’t routinely monitor the discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback -
i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please
Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/ -
I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay -
My Apple TV (2nd Generation) continually requests authorisation, even after my MacBook says I am authorised. Please can someone help?
Welcome to the Apple Community.
Are your Store location and other details set up correctly on the Apple TV. have you tried de/re-authorising your MacBook. -
I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all i have on the screen is the apple logo.I have hooked the phone upto itunes but nothing is happening. What do i do? Can someone help please???
Sorry, due to the Terms of Use problems with jailbroken devices can't be discussed here.
You can only get help from those people who told you to modify the software, only they know what the jailbreak did to the firmware. -
my mother got an iPad air after she thought her old iPad was locked up with voice over anyway it says to hook to itunes i told it to fetch from the iCloud and it wont hook up to iTunes can someone help?
Punctuation would make your post a little easier to read and understand.
What do you mean it won't hook up to iTunes? you mean iTunes does not recognize the device? If that's what you mean, one of these might be helpful.
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X -
My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me? My iphone and other macbook connect and work no problem. What steps can I take?
Ok....
Now go to your router's settings. Not sure who makes your router...
Look at wireless part of it and see how many computers are actually hooked up to it.
Delete your computer from it (in your router).
Restart your router.
After your router has restarted, try to connect to it with your MB and see if you can browse the net. -
I have a router downstairs in my house. When i go downstairs, i have internet. But when i go back upstairs, i lose my internet and my ipod cant connect to the internet untill i go back downstairs. Can someone help me with this dalema?
Have the same problem with one room in my house. The good news; my internet provider told me about a device which boosts the signal through the the houses wiring. You plug the sender into an electrical outlet and your USB output, the receiver / transmitter you plug into an outlet in the room with the poor signal and use Wi-Fi as always. It priced in around $30 to $40. The bad news; I just don't remember what it was called, but I'm sure if contact your provider or local electronics store, discribe what your looking for they can hook you up with the needed hardware. Hope this helps, Good luck.
-
I can not send email from my iPhone 3g using me dot com. Can someone help?
I have had my iPhone 3g for 2 weeks now I believe and in this time have received tons of e mails but when I try to reply or send a new e mail I get the message "The connection to the outgoing server "smtp.mac.com" failed."
I don't see why since my wifi is connected and does everything else, like surf the web, download updates to apps and receive e mail.
Can someone help me figure this out? I also just purchased an iPod touch which will be using wifi only so I'm scared that it too will have the same problemI have a 1st gen iPhone that I just updated the software to 2.0.2
Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
Anyone??? -
When I try to send email from my iPad and iPhone it says that I have the wrong username and/or password, but I know they are correct. Can someone help me?
"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done. -
my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend
I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Hello can someone help me I have an iphone 4 and my daughter has an ipod touch we are on the same email address but somehow with in the last 25hrs all of my contacts are gone and only hers on on my phone is there a way for me to get all my contacts back?
If you need assistance with finding any of your restores or attempting to restore from any that happened prior to his incident follow this article
http://support.apple.com/kb/ht1766
IF you do find a backup that has your contacts; I'd /highly/ recommand turning off your wifi network after the restore is finished because if the issue is with your iCloud your contacts may merge back with her's.
With iCloud you DO NOT want to share the account; bad things happen Evil evil thigns...
But in all seriousness; if two devices have the same iCloud; iCloud is told to merge and sync infomation between hte two and can't tell that it doesn't belong to the same person -
Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Maybe you are looking for
-
How can I error-check multiple pdf files at once?
There are programs online but they're too costly. Isn't there sometime Adobe has built-in where I can hilight an entire list of pdf files and check for errors to see if one of them is giving a font-issue error or etc. I'm using Windows 7 and we have
-
Unable to start subflow in SXMB_MONI_BPE
Hi, Due to a basis problem all interfaces are stopped during six hours. After that when service is restarted i've tryed to reprocess stopped bmp's in SXMB_MONI_BPE transaction. But most of them continue in error and message "Unable to start subflow"
-
My JSF Page not load in firefox3 woodstock4_3.widget is undefined
Hi I am test the jsp page in firefox 3 and the page is loading for a long time, sometimes im refresh de page and load normally, somebody know what happen?. Why in iexplorer is 3 o 4 more slow than firefox 2. Additionali en the errors console i see Er
-
We are searching for best practices for developping secure web applications using uix / struts / bc4j that demonstrates different login scenario and connection pooling with the database. Did somebody find something in documentation ? or a great book
-
[solved] network gone after last update (vmware player)
at boot i get no such interface error from ifconfig i get only loopback dmesg vmxnet: disagrees about version of symbol ... vmxnet: Unknown symbol ... Removed interfaces and added again with same result Let me know if i should file a bug or how to fi