Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "
Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
Thanks
whats the problem?
Aquaphire
---USING LABVIEW 6.1---
Similar Messages
-
Writing to a data file with time stamp - Help!
My program currently asks the user to enter a path to save the data from my virtual channels. What I want is to have a default directory to store my data in and also have the file name that is created to be the date. I tried to use create open or replace but I cant get it to work. Any suggestions would be great. Also and comments to the code would help out a lot.
Thanks
Attachments:
Test.vi 141 KBLook at the attachment. It uses a front panel path control set to only select a new or existing folder (right click and Browse Options). Then, using a Build Path and a Format Date/Time String, a full path to a file is created. Pass this to your Open/Create/Replace File.
Attachments:
Date to File Name.vi 13 KB -
Can someone please tell me if the late Dec. 2012 imac comes with mountain lion or something diffrent? thanks.
AppleMenu > AboutThisMac ...
Mine is 10.6.8 (SnowLeoaprd)
10.7.x is Lion
10.8.x is Mountain Lion -
can someone tell me why a standard microphone doesn't seem to work with a mac-mini? Is there another kind of microphone I need to use?
Most microphone output a low voltage signal that must be put through a preamp.
The computer needs to have a line voltage signal level instead.
Allan -
Tungsten T3 - need to access DAT file with addresses - Please Help
I have an old Palm Tungsten T3. The desktop computer with the synced address data has died and the T3 has lost power (so no addresses anymore).
I have a .DAT file backup with all my addresses. Can anyone advise how I can get access to these.
Reinstalling Palm Desktop 4.1.4e did not help as it doesn't allow me to import .DAT files.
Can I import this file into any other app or open up in Excel etc?
Any advice would be much appreciated.
Thanks in advance.
Post relates to: Tungsten T3
This question was solved.
View Solution.You have to physically copy the .dat file into the User directory over the existing address.dat file. Find the one with your hotsync name abbreviated (i.e. - C:/Program Files/Palm (or PalmOne)/ your Hotsync name /address) and copy the .dat file there.
Be sure you copy the file and keep another one safe in case something goes wrong. The existing blank address.dat file will be only about 2k in size.
Good luck!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee
Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can. -
I can't see the menu bar in PSE 9 Organizer. Where File Edit View Window Help should be
I can't see the menu bar in PSE 9 Organizer. Where File Edit View Window Help should be
Check your Windows Display Preferences, and make sure you're using the default, 100%, smaller screen fonts.
Ken -
How to load unicode data files with fixed records lengths?
Hi!
To load unicode data files with fixed records lengths (in terms of charachters and not of bytes!) using SQL*Loader manually, I found two ways:
Alternative 1: one record per row
SQL*Loader control file example (without POSITION, since POSITION always refers to bytes!)<br>
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode.dat
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001111112234444
01NormalDExZWEI
02ÄÜÖßêÊûÛxöööö
03ÄÜÖßêÊûÛxöööö
04üüüüüüÖÄxµôÔµ Alternative2: variable length records
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode_var.dat "VAR 4"
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001501NormalDExZWEI002702ÄÜÖßêÊûÛxöööö002604üuüüüüÖÄxµôÔµ Problems
Implementing these two alternatives in OWB, I encounter the following problems:
* How to specify LENGTH SEMANTICS CHAR?
* How to suppress the POSITION definition?
* How to define a flat file with variable length and how to specify the number of bytes containing the length definition?
Or is there another way that can be implemented using OWB?
Any help is appreciated!
Thanks,
Carsten.Hi Carsten
If you need to support the LENGTH SEMANTICS CHAR clause in an external table then one option is to use the unbound external table and capture the access parameters manually. To create an unbound external table you can skip the selection of a base file in the external table wizard. Then when the external table is edited you will get an Access Parameters tab where you can define the parameters. In 11gR2 the File to Oracle external table can also add this clause via an option.
Cheers
David -
Want attach the XML data file with layout template in Oracle 10g
Hi All,
I need a help from you genius guys.
I am genrating reports in BI with xml the procedure which I am following is as below.
1. generating XML from the RDF
2. creating a template in .rtf format
3.after that loading the xml to the template then getting the required report.
This all is doing through the given buttons
But now my requirement is to create the gui from user can select the report and get the desire output file so how we would be able to attach the XML data file with layout template in Oracle 10g.
If you require more detail please let me knnow.
Thanks,
HarryI am not using Oracle apps.
I am using oracle 10g reports and I get something in it like one patch I downloded and one java code is having which creates the batch file ...still I am working on it ..
If you will get some please share so that it will be helpful.
Thanks,
Harry -
SQL Loader - CSV Data file with carraige returns and line fields
Hi,
I have a CSV data file with occasional carraige returns and line feeds in between, which throws my SQL loader script off. Sql loader, takes the characters following the carraige return as a new record and gives me error. Is there a way I could handle carraige returns and linefeeds in SQL Loader.
Please help. Thank you for your time.
This is my Sql Loader script.
load data
infile 'D:\Documents and Settings\user1\My Documents\infile.csv' "str '\r\n'"
append
into table MYSCHEMA.TABLE1
fields terminated by ','
OPTIONALLY ENCLOSED BY '"'
trailing nullcols
( NAME CHAR(4000),
field2 FILLER,
field3 FILLER,
TEST DEPT CHAR(4000)
)You can "regexp_replace" the columns for special characters
-
LabVIEW created .DAT file with saving only new data on existing files
I can successfully create and save a .DAT file using LabView and Diadem. The save command I am using (in Labview) only overwrites existing files, I would like it to save only the new data from the last save. Overall I would like to save the data every 1hr and since my test will last for many hours, the further along in the test the longer it would take to save the full file. I know Diadem has the capability to save in such a manner, so I have thought about after I write to Diadem have a small Diadem application save periodically, but I haven't found a way to save the .DAT file, with out any signals coming into the save function. I have attached the example .DAT file creater and saver I am using to figure it out. thanks for your help!
Howdy New Guy -
I am not sure if you are looking to append to a file, or if you would
like to overwrite a file. In either case, you can take a look at
the "Append To File.vi" example for DIAdem.
Either way, you may be experiencing problems because you are only using
the "DIAdem Simple File Write.vi" (found on the DIAdem >> DAT
Files palette). Instead, you can use the "DIAdem File Write.vi"
(located on teh DIAdem >> DAT Files >> DAT Files Advanced
palette). This VI can be set to overwrite or append to file.
I hope this helps in your development!
Andrew W. || Applications Engineer -
Create XML format file in bulk insert with a data file with out delimiter
Hello
I have a date file with no delimiter like bellow
0080970393102312072981103378000004329392643958
0080970393102312072981103378000004329392643958
I just know 5 first number in a line is for example "ID of bank"
or 6th and 7th number in a line is for example "ID of employee"
Could you help me how can I create a XML format file?
thanks alotThis is a fixed file format. We need to know the length of each field before creating the format file. Say you have said the first 5 characters are Bank ID and 6th to 7th as Employee ID ... then the XML should look like,
<?xml version="1.0"?>
<BCPFORMAT xmlns="http://schemas.microsoft.com/sqlserver/2004/bulkload/format"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RECORD>
<FIELD ID="1"xsi:type="CharFixed"LENGTH="5"/>
<FIELD ID="2"xsi:type="CharFixed"LENGTH="2"/>
<FIELD ID="3" xsi:type="CharFixed" LENGTH="8"/>
<FIELD ID="4" xsi:type="CharFixed" LENGTH="14"/>
<FIELD ID="5" xsi:type="CharFixed" LENGTH="14"/>
<FIELD ID="6" xsi:type="CharFixed" LENGTH="1"/>
</RECORD>
<ROW>
<COLUMNSOURCE="1"NAME="c1"xsi:type="SQLNCHAR"/>
<COLUMNSOURCE="2"NAME="c2"xsi:type="SQLNCHAR"/>
<COLUMN SOURCE="3" NAME="c3" xsi:type="SQLCHAR"/>
<COLUMN SOURCE="4" NAME="c4" xsi:type="SQLINT"
/>
<COLUMN SOURCE="5" NAME="c5" xsi:type="SQLINT"
/>
</ROW>
</BCPFORMAT>
Note: Similarly you need to specify the other length as well.
http://stackoverflow.com/questions/10708985/bulk-insert-from-fixed-format-text-file-ignores-rowterminator
Regards, RSingh -
UNICODE data files with SQLLDR
how can i load UNICODE data files with SQLLDR.
my Oracle instance is on UNIX with NLS_CHARACTERSET WE8ISO8859P1.
I have .dat files extracted from SQL Server using bcp utility with -w option.
When i use -c option i'm not getting the european characters correctly like the a and e with 2 dots on top....
when i load UNICODE (-w) file with CHARACTERSET UTF8 in my control file, it doesnt go thru. Any solution for this ? Thanks !I just created a unicode textfile on windows with some westeuropean characters and imported it into we8iso8859p1 database on linux using controlfile parameter CHARACTERSET UTF16.
They got all properly converted.
As Justin mentioned, unicode on windows means generally UTF16 Little Endian.
Best regards
Maxim -
How can I find out the previous service provider my device is still registered with?
When trying to create a BIS account, I received the error message that my device was already registered with a different service provider and that I would have to reregister it. The problem is that I bought it new from cordlessphoneworld.co.uk and it was supposedly "completely refurbished".
My Pearl 8100 is a BT phone, however BT confirmed to me that it was not registered with their network. The seller, cordlessphoneworld.co.uk, told me to contact BlackBerry support, and BB support told me to talk to my service provider (O2 UK) who has already told me I would have to get in touch with the previous service provider.
How can I get my BB released from its current BIS registration, or at least find out who it is registered with, in order to finally enjoy its full functionality and not just the regular phone stuff?
My BB info:
PIN: *********
IMEI: #################
Happy for any help or ideas!!
Thanks.
EDIT: Removed personal information
Message Edited by Andy on 08-30-2009 02:33 PMTheres a high chance it was set up with the original carrier that is was sold with.
To find this out you need to get the vendor id of the device.
Do this by holding down (all at the same time ) the ALT+CAP+H button..
Or
Whilst pressing down ALT, select E Then S then C then R
You should see a little page pop up with random info.
What you are looking for is the vendor ID. a three digit number.
Then I will post a list of all the vendors IDS at the end of this message as i can't remember the link..
Anyhow, find the carrier from the list and call them asking them to release the PIN..
IF... the prev user didn't register it with that carrier (which would mean you phone has possibly been used twice before) then you can call your current Carrier and ask them to escalate the call to RIM who will be able to tell...
Hope this helps..
ALT+CAP+H
OR
ALT+ E,S,C,R
100 T-Mobile US
101 AWS
102 Cingular Wireless
103 Nextel
104 Sprint PCS
105 Verizon
106 Alltel
107 Rogers
109 BWA (Aliant/Sasktel)
111 MM02 DE
113 Telfort
114 T-Mobile DE/AU
115 TIM
116 Hutchison
117 Bouygues
118 SFR
119 Orange_France
120 VODAFONE (UK)
121 Telcel
122 Telstra
123 T-Mobile (UK)
124 Vodafone Germany
125 MM02 UK/IRL/NL
126 Telus
127 SMART
128 Starhub
129 Telefonica
130 Swisscom
131 Cable & Wireless
132 Vodafone (IT)
133 Vodafone (ES)
134 T-Mobile (NL)
135 Cincinnati Bell
136 Telefonica_LAM
137 Vodafone Austria
138 Vodafone Australia
139 Vodafone Ireland
140 Vodafone Sweden
141 CSL
142 Orange UK
143 Vodafone New Zealand
144 SingTel
145 Globe
146 Optus
147 Orange Mobistar
148 Vodafone_HU
149 Bharti
150 KPN
151 TIM_Greece
152 Proximus
153 Vodafone_Portugal
154 TIM_Brazil
155 BT_Mobile
156 Earthlink
158 E-Plus
159 BASE
160 Dobson
161 Vodafone_Egypt
162 Orange_Switzerland
164 Triton
165 Maxis
166 Vodafone_Denmark_(TDC)
167 MobileOne_(Voda_Singapore)
168 Vodacom
169 T-Mobile_PO
170 T-Mobile_CZ
171 T-Mobile_HU
173 MTN
174 Entel
175 Amena
176 SmarTone
177 TCS
178 Avea
179 F100
180 Turkcell
181 Partner
183 Orange_Global
186 Telkomsel
188 Vodafone_Greece
189 USCC
190 Mobilink
194 Voda_Luxembourg
195 Voda_Iceland
198 Vodafone_CZ
204 China_Mobile
205 Movilnet
209 Sympac
210 TIM_Argentina
212 Etisalat
214 AMX
215 Telefonica_Venezuela
217 Orange Romania
218 KTP
222 Mobitel Bulgaria
224 PCCW/Sunday
227 Mobily
229 Eurotel
230 Hutchison Essar
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~ -
Please help with my iPhone I bought from a pawn shop but have no contact with the previous owner so I cannot get past the icloud activation Please anyone help. it would mean a lot, I paid good money for this phone
Return it to the pawn shop and get your money back. The device is permanently locked and with the previous owner to unlock it you can never use it except as a paperweight.
Maybe you are looking for
-
Muse, Transferring from Vista, no Longer supported by adobe to windows 7
My laptop has window 7, my PC with the designed website on it has Vista. I can no longer open vista. THe files for Muse have been found but do not transfer to my PC I have tried drop box and memory stick. MOst of the files do not show a size, IE as
-
Is it possible to boot from usb dvd-drive on Qosmio G20
I have QOSMIO-G20. I'd like to boot from the usb dvd-drive, but in bios i can use only external Floppy-drive :( is it possible to unblock bios or maybe to upgrade it that i can boot from the external dvd?
-
Need help to decompile .SWF
I hope this doesn't break any forum rules, but I desparately need an .SWF decompiled to .FLA. I am the webmaster for a small (not for profit) club, and I've inherited the club website. Naturally, the source for many things are missing, including the
-
Can't Print in iPhoto 6.0.5
I installed iLife '06 then ran Software Update to get to iPhoto 6.0.5. Now I can't print anything in iPhoto. It displays the message "No pages from the document were selected to be printed." I HAVE selected a photo, set up the page size, etc. but not
-
Forefront TMG network policy server and VPN issue.
Hello every one! I have a problem with configuration VPN server on Forefront TMG on Windows Server 2008R2 with latests microsoft updates. I install Forefront TMG on on Windows Server 2008R2 with latest updates. Then, I configure startup wizard where