Can SwitchRes X fix the lines?
I have the previous generation 15" PB, not the current one, so I can't try this myself. Since the lines people are seeing are most likely from power supply ripple noise (probably from the inverter board) coupling into the video subsystem, and since the noise is visibly manifested as a difference frequency or beat frequency between the display's scan rate and the frequency of the noise, has anyone tried using a program like SwitchRes X or DisplayConfig X to alter the pixel dot clock (suggest trying ~5% to 10% higher) to see if the beat frequency can be altered enough such that the lines disappear? Just a thought of something to try for those looking for relief outside of any Apple may eventually provide.
Upon further review of this issue, I completely retract my theory that the horizontal lines are related to power supply noise. I should have looked into this more closely before coming to that conclusion. Sorry for false hopes.
Similar Messages
-
all data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ????? What is wrong with it???? How do I fix it????
You aren't attached to a bluetooth headset or other device for some strange reason? Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.
-
Can somebody please fix the mess that is iBooks?
can somebody please fix the mess that is iBooks? lousy metadata, lousy usability, and now fails to read my library until I delete it from the filesystem then rebuild it. reboot, and it's screwed again. do you need someone to run the iBooks development program? please let me know.
For Apple to see your message, best repeat it at
http://www.apple.com/feedback -
Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone) so that person can find their iPad coz the police would of taken mine if I did not show proof of purchase
You are not communicating with Apple by posting here. Everyone here is just a fellow user and cannot fix anything.
The Find My iPad service may have indeed been accurate to the limits of the technology. Unless the iPad was a 3G unit, location is determined based on the nearest WiFi router which in your case could just happened to have been yours. The police may be the ones who need to "fix" their understanding of how the technology works and its limitations.
If you want to provide feedback to Apple on the matter, you can do so via their feedback pages:
http://www.apple.com/feedback/ipad.html
but to be of any good you'll have to provide them with more precise details.
Regards. -
Why can't you fix the theme in iPhone so it's black for exampel? It would be much nice!!! :)
Why can't you fix the theme in iPhone so it's black for exampel? It would be much nice!!! :)
http://www.google.se/imgres?um=1&hl=sv&sa=N&biw=1280&bih=709&tbm=isch&tbnid=xQZ9 2n7EiwlMEM:&imgrefurl=http://iphoneroot.com/t9-for-iphone-cydia/&docid=u4eAIeebp mV7WM&imgurl=http://iphoneroot.com/wp-content/uploads/2009/02/t9.png&w=320&h=480 &ei=2B_OT-vTAqn14QSmtoixDA&zoom=1&iact=rc&dur=462&sig=101681684250595658866&page =1&tbnh=162&tbnw=108&start=0&ndsp=19&ved=1t:429,r:1,s:0,i:74&tx=64&ty=29
i want it to look like that, how do i fix that? -
After trying several times to restore and update the device I keep getting error 1015. Is there anything that I can do to fix the phone even if is were to mean using a older iso?
This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
-
Can you please fix the move and scale when adjusting a wallpaper can you set it up right before iOS 7 update and it aggravates me that every time I try to put a picture of my wallpaper is just Zooms in and you can't see all of the picture it wasn't like this before
Nobody here can change it. We're all just other users like yourself here.
-
How can you tell if the line has errors?
I'll try and keep this as brief as possible.
<background>
For 2years (up to 6months ago) I was on BE ADSL and was very impressed with the quality of the service (low latency, decent bandwidth) on my line. However when I heard that FTTC was being rolled out I switched to Zen internet on the understanding that I could then switch to the FTTC product as soon as it was available.
Immediately after switching to Zen I started to experience problems with VOIP (I use VOIP extensions against an externally hosted PBX) and was seeing CRC errors on the line. In the process (~2months) of getting this diagnosed the FTTC product became available and since I wanted uncapped switched to BT Infinity for Business Option 2.
</background>
I now find that again I get sporadic VOIP problems (but not as bad as on the ADSL2 service via Zen) but very regular BBC iPlayer dropouts listening to the radio.
Due to the previous problems whilst on ADSL2 I suspect I still have a minor line fault but as I can't access any stats on the line have no way to verify. Does anyone have any pointers on where to get line stats to see what is going on on the connection? I can't get any info out of the OR modem.
Regarding my network. I am using a cabled, gigabit connection directly to a Draytek 2820n which is in turn doing the PPPoE through the BT OR modem. I use two different machines and experience the same issues on both. I'm a server & network admin by trade so pretty sure it's not my internal infrastructure at fault.
My IP profile is apparently 38717 Kbps down / 10000 KBps up.
BT Speed tester shows achieved 26581 down and 4912 up thoughjmansford,
I may be wrong about this as I am only refering to my own 2750n settings,but looking at your upload throughput test results some if not all of your problems could be due to a wrongly wieghted QoS setting and/or port capacity setting based on QoS.
As you line profile is ok at 38717 Kbps down / 10000 KBps up it looks like there is no problem on your actual line,but phone line noise test might find some crackle,but I don`t think so.
By your post,you say your are routing PPPoE through the Draytek into the OR modem.?
If so,maybe you could try leaving the OR or Draytek out of the chain as a process of testing where faults [if any] are.?
To sum up a bit imo leaving the OR modem out of the net chain might be a better way as I only use the 2750n on it`s own as the OR modem is not then needed.
Opps! sorry I might be wrong in my above thinking,but is your Draytek just a router or a modem/router combined like the 2750n.?
But either way the QoS setting are still important. -
How Can I listen to the line-in on my T400?
When I am at my desk, I've always had my satellite radio plugged into the line-in on my computer so that I can listen to it through the same speakers. With my new T400, I have the radio's output plugged into the line-in on the Advanced Dock. I know that it's getting a signal because if I record with Microsoft Sound Recorder, it records the radio.
How can I listen live to the signal coming into the line-in?You can thank Microsoft for this one. They disabled the pass-through ability in Vista. Apparently too many people complained about feedback issues when trying to use webcams or VOIP programs and didn't know to mute the Line-In on the mixer. It took me forever to find how to correct it.
The following will enable the input sliders in your playback devices so audio pass through works without having to run through an application like it worked in XP. Remember, always backup your Registry just in case. I had to create new Keys for filter and SpeakerHp but yours may already be there
1) Open regedit (Start->Run, type regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE1031*8}\0000\Settings\filter\SpeakerHp\
3) Create a new Binary Value
4) Give it the name EnableInputMonitor
5) Set it's value to 01
6) Restart your machine
7) Open your Playback Devices (right click on volume control icon in system tray, select Playback Devices)
8) Open the Speakers/Headphones
9) Go to the levels tab
10) Unmute the input monitor
T500 - P8600 2.4Ghz Core 2 Duo, Modded - 4GB Patriot DDR3 and 320GB Caviar Black 7200rpm drive with Ati HD3650 and Catalyst 9.6 modded drivers - Vista Business 32bit stripped down to bare bones with VM's from Ubuntu to Win7RC1 64-bit. -
I want a free upgrade to Intel To fix the line problem
i have the line problem and the new intel MacBook has (i think) a bigger screen but less pizels than the old one so i guessing it will not have the line problem and i want a free upgrade.
do you think apple will do it?Update: After 2 hours on the freeking on with apple care... i got nothing, every person i talked to acted like they have never even heard of the line problem. So yeah there was no way of me getting a MacBook.
They did say i could send my PB in to see if i could get the screen fixed. I really dont want to because i cant live a long long time with out my powerbook and then get it back weeks later and NOTHING fixed.
BTW - it was a little funny with every one using the term MacBook, They would mess it up and stuff and even when one of the person was talking about it i was thinking "Mac Book" as in a book the people look in to look up specs and problems and stuff.
Also one person said they have allready sold over 100,000 and im like "wow they only went on sale a few hours ago and its not shipping for another month. -
Since the new version of Firefox (which I love, esp the reduced menu bars at the top, leaving more web page viewable space), I am unable to use the multi-touch pinch/zoom function to resize pages. the scrolling still works, and all worked fine before.
Is this a bug or is there something I can do to fix it?
Thanks for your time.
MxNot a fix but if it's just a web site here and there that you find yourself using the pinch zoom feature you can use the IE Tab 2 addon to automatically use the ie engine and the zoom works.
You lose the other firefox features on those pages but as I said, if it's just a few sites it's worth a look.
I sure hope the Mozilla community fixes this in their desktop PC version soon. You can't gripe if it's free so I just keep waiting. :)
Their android and iOS version supports it so why not the PC version? -
Can you please fix the iOS 4.3 dropped calls?!
Hi,
There was another forum thread about iOS 4.3 dropping calls, and it must have been taken down because the user mentioned downgrading.
In any case, I need a solution for my dropped calls.
I had no problems with hours of calls on IOS 4.1 on an iPhone 4, and then decided to "upgrade" because I would rather not have my location monitored all the time. I used to make long conference calls too.
Now, I can't make those conference calls without it dropping every few minutes, and sometimes I have problems connecting with people. Today, my call to my father dropped after 2 minutes, and then it dropped every time I called him back (4 times). The other day, I tried to get a conference call going, and it dropped more than 10 times. I NEVER had that problem with 4.1.
Yes, I rebootted it. Yes, I even REFRESHED and gave my iPhone a completely new start (accidentally erasing some pictures I meant to keep along the way). It DIDN'T WORK.
Now, I'm frustrated. Can anyone help me with a legal idea that I haven't tried yet? Or can you developers fix this situation - QUICKLY?Sorry, not refreshed -- I meant restored.
I live in Eugene, OR, but I have read somewhere that people in DC are having problems. What's the deal? -
How can i read all the lines from a text file in specific places and use the data ?
string[] lines = File.ReadAllLines(@"c:\wmiclasses\wmiclasses1.txt");
for (int i = 0; i < lines.Length; i++)
if (lines[i].StartsWith("ComboBox"))
And this is how the text file content look like:
ComboBox Name cmbxOption
Classes Win32_1394Controller
Classes Win32_1394ControllerDevice
ComboBox Name cmbxStorage
Classes Win32_LogicalFileSecuritySetting
Classes Win32_TapeDrive
What i need to do is some things:
1. Each time the line start with ComboBox then to get only the ComboBox name from the line for example cmbxOption.
Since i have already this ComboBoxes in my form1 designer i need to identify where the cmbxOption start and end and when the next ComboBox start cmbxStorage.
2. To get all the lines of the current ComboBox for example this lines belong to cmbxOption:
Classes Win32_1394Controller
Classes Win32_1394ControllerDevice
3. To create from each line a Key and Value for example from the line:
Classes Win32_1394Controller
Then the key will be Win32_1394Controller and the value will be only 1394Controller
Then the second line key Win32_1394ControllerDevice and value only 1394ControllerDevice
4. To add to the correct belonging ComboBox only the value 1394Controller.
5. To make that when i select in the ComboBox for example in cmbxOption the item 1394Controller it will act like i selected Win32_1394Controller.
For example in this event:
private void cmbxOption_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxOption.SelectedItem.ToString(), ref lstDisplayHardware, chkHardware.Checked);
In need that the SelectedItem will be Win32_1394Controller but the user will see in the cmbxOption only 1394Controller without the Win32_
This is the start of the method InsertInfo
private void InsertInfo(string Key, ref ListView lst, bool DontInsertNull)
That's why i need that the Key will be Win32_1394Controller but i want that the user will see in the ComboBox only 1394Controller without the Win32_Hello,
Here is a running start on getting specific lines in the case lines starting with ComboBox. I took your data and placed it into a text file named TextFile1.txt in the bin\debug folder. Code below was done in
a console app.
using System;
using System.IO;
using System.Linq;
namespace ConsoleApplication1
internal class Program
private static void Main(string[] args)
var result =
from T in File.ReadAllLines(Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "TextFile1.txt"))
.Select((line, index) => new { Line = line, Index = index })
.Where((s) => s.Line.StartsWith("ComboBox"))
select T
).ToList();
if (result.Count > 0)
foreach (var item in result)
Console.WriteLine("Line: {0} Data: {1}", item.Index, item.Line);
Console.ReadLine();
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile but do not reply to forum questions. -
How can i check if the lines are the same ?
private bool displayed;
private void PostMessage()
for (int i = 0; i < ScrollLabel._lines.Length; i++)
for (int x = 0; x < WordsList.words.Length; x++)
if (ScrollLabel._lines[i].Contains(WordsList.words[x]) && !displayed)
displayed = true;
lineToPost = ScrollLabel._lines[i];
PostFacebookWall(LongaccessToken, lineToPost + Environment.NewLine + Environment.NewLine + "נשלח באופן אוטומטי כניסיון דרך תוכנה");
I call this method in a timer tick event every second.
But if the variable string lineToPost is
identical it will not send it again. But it might be a situation that the lineToPost may
contain the exact same word inside but the whole line is not the same so i want to send it.
Only if the whole line is the same, then don't make the postFacebookWall
If the whole line is not the same but the same word is the line as in other line(s), then use thePostFacebookWall method.
I'm using a bool variable
so it will not send the same line over and over again.
I would like it to send the line(s) once, regardless if there is only one line or if there are more than one line.
The problem is the way I'm using the bool now,
it will send a line and then will never send any other line at all.
I tried to change the method to this:
// key: line index, value: sent line
private Dictionary<int, string> sent = new Dictionary<int, string>();
private void PostMessage()
for (int i = 0; i < ScrollLabel._lines.Length; i++)
var line = ScrollLabel._lines[i];
if (sent.ContainsKey(i) && sent[i] == line) continue;
sent[i] = line;
if (WordsList.words.Any(line.Contains))
PostFacebookWall(LongaccessToken, line + Environment.NewLine + Environment.NewLine
+ "נשלח באופן אוטומטי כניסיון דרך תוכנה");
numberofposts += 1;
label7.Text = numberofposts.ToString();
But its not good it keep sending many times the same lines.
This is the timer tick event code:
private void timer1_Tick(object sender, EventArgs e)
counter += 1;
if (counter == 10)
scrollLabel1.Reset();
scrollLabel1.Text = " ";
scrollLabel1.Invalidate();
readableRss = RssReader.covertRss("http://rotter.net/rss/rotternews.xml");
this.scrollLabel1.Text = readableRss;
scrollLabel1.Invalidate();
counter = 0;
PostMessage();
Im updating the text/lines every 10 seconds .
And calling the PostMessage method every second.
And when im calling the PostMessage it should it should call inside the method PostFacebookWall only when the whole line is not identical to other lines and if a word in words is exist in any line.
The variable WorldList.words is string[] contain some words(string).
For example if i have this line:
"hello this is a test"
So the word test exist in words so post this line.
Then if i have another line :
"hello this is a test" so in dont post this line since its the same.
But if i have a line: "hi this is a test" the word test exist but the whole line is not the same as above so post this line.
And of course if there is a different line with a word that exist like: "my name"
Then post this line too.Hi Chocolade1972,
C# forum:
Discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools.
I’m afraid that it is not the correct forum about this issue, I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum. Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can I read out the Line-in connector of my PC and process datas in Labview??
I would like to read an analog signal from the line-in connector. Furthermore I would like to process theses data. Are there any VI's or examples concerning this problem?
In LabVIEW the Sound Input VIs will read from whatever device is configured for recording in Windows. If you have the line-in set as the recording device then the Sound Input functions will allow you to read in from line-in. There are some examples that do this that ship with LabVIEW titled:
Sound Card AutoPower Spectrum.vi
Sound Card Simple SpectrumAnalyzer.vi
Hope this helps.
Kevin R
Applications Engineer
National Instruments
Maybe you are looking for
-
Report development for tds deducted on expense GL accounts
Dear Friends, I have to develop one report for the with holding tax deducted on the expense GL accounts. In the select lay out I will enter the expense GL range and company code and posting date range. when I execute it has to show as
-
Importing GroupePartners with dtw : Type of BusinessPartnerGroups
Hello, when i try importing BusinessPartnersGroups (code, name, type) I have to put a GroupType (S for Supplier or C for Customer) but it is not S or C but others value which are not into the SDK object browser. does anyone know these values ? thanks
-
Getting all SQL servers in one dynamic group
Since the release of the SQL 2014 MP there are now 2 SQL server MP's, 1 just for 2014 and one that covers 2005,2008 & 2012. Does anyone know a way to create a dynamic group that includes all servers that have any SQL install on?
-
my wife is taking online classes and has a MacBook...there's a class she takes that has interactive graphs...the graphs will not load properly and says to download the latest version of Java...we've done the software update and her MacBook is up to d
-
I want to remove a few photos from my iPad, but not from my Mac (from-to which I sync). Is this possible? I can get the "delete" button to show on the iPad, but it is not fully lit--i.e. pressing it does no good.