Can't access EWS and front printer panel options all locked

The web services icon and Network icons are disabled. All the options on the front panel to connect to the network are locked so I can't do anything from the printer panel.
I printed the Network configuration and obtained the ip address but the EWS does not come up. It says it can't connect.
I tried the ip address that i previously used to connect with and that won't come up either.
How do i get the printer connected to the Network again? HELP!

Thanks for the response.
I tried unplugging the plug but that did not reset the printer.
I found another post that explained how to access a hidden Suppot menu.
I was able to find the option that performs a partial reset and that restored all the functionality
to connect to the network.
The printer is on the network and I can now access the EWS. I also modified the admin settings
to not lock the printer panel again!

Similar Messages

  • I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?

    I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?

    Hello mrmacjohn,
    Verifying that any iCloud account that may be signed in is signed out should resolve this error.
    On your Mac, open iCloud preferences, then click Sign Out.
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Cheers,
    Allen

  • Getting quite frustrated with my iPhone 4S.  Can't access WIFI and/or Bluetooth nor will my computer allow it to be a "hotspot" unless physically tethered to computer.  It started acting up after download....it also has messed up some app

    I've only had this phone since Sept. and have already had to have the speaker replaced.  NOW I can't access wifi and/or bluetooth (both are grey).  I can't use the Personal Hotspot either (and the passcode no longer shows up).  I can only access internet via the phone through the USB.  This started over the past few days (and after I updated to IOS).
    Some of my apps no longer work either...over 100+ hours of audiobooks on Audible can't be accessed as the Audible app just shuts off.
    Any recommendations on how to recify?   I'm pretty rural so downloaded anything takes going to the next town over to get a signal from the library...  and all of my searching is eating into my 5gb limit through ATT....so it is a bit irritating

    called Apple Care this a.m....new upgrade on 12/31/12 is supposed to fix the "bug"

  • How can I access photos and videos saved to the iCloud?

    How can I access photos and videos saved to the iCloud? I backed up my iphone to the Cloud but now the files are nowhere to be found.
    I had to reset all content and settings in order to troubleshoot an issue. Before I did this, I backed up the iphone to icloud. When I reprogrammed the phone, I had to set it up as a new device and individually sync apps and other items from itunes. But by doing this, I somehow lost some videos and can't seem to find where they would have been saved/backed up. Can anyone offer any guidance?

    You can't view photos and videos on icloud (except for shared photo stream pics).  iCloud merely sync photos between devices using the stream.  If you don't have photo stream turned on, then the only place photos in the camera roll are located are in a backup.  You would have to restore from the backup.  But be warned that many users have ended up losing their photos when performing a restore, for whatever reason. 
    What you should do in the future is always sync photos/videos to a computer for storage, don't leave them on a device or trust icloud to somehow store them.

  • I would like to have a storage solution that is accessed wirelessly, can be accessed remotely and is viewable in the finder side bar (mavericks)

    I would like to have a storage solution that is accessed wirelessly, can be accessed remotely and is viewable in the finder side bar (mavericks)
    Is this possible? if so, how? Thanks in advance
    Ini

    You have to pay for online storage, someone has to pay to keep the lights on. As far a getting it on the Finder sidebar, you did something wrong. That is where mine resides, see below.

  • Can't access filter gallery. Checked the Show All Filters in preferences. Reinstalled. Still grayed out.

    Can't access filter gallery. Checked the Show All Filters in preferences. Reinstalled. Still grayed out.

    Make sure you document is in RGM 8 bit color depth.   Some Filters do nt support hings like CMYK or Lat or 32 bit or 16 bit documents. See it Filter gallery is available  when you open a new document RGB 8 bit color.

  • When syncing my ipod, how do I get it to look at external drives for music stored them?  It just tells me it can't find something and gives me no option to tell it where it is located.

    When syncing my ipod, how do I get it to look at external drives for music stored them?  It just tells me it can't find something and gives me no option to tell it where it is located.

    Hi SouthMountainSound,
    It sounds like the tracks may be missing from your iTunes library. When tracks in iTunes display a it means the file cannot be located; it may have been moved or deleted. If it cannot be located, this may cause the issue of not being copied to your iPod. For this issue, we will need to refer to the following article:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • Can't access Keyboard and Mouse panel of System Preferences

    I can't access the Keyboard and Mouse panel of System Preferences. System Preferences starts up fine but when I click to access the Keyboard and Mouse panel, System Preferences indicates in the title bar of the window that it is loading the panel but it never does.
    Does anyone have an idea about how to fix this? Thank you.
    Brian

    Hello Brian:
    I would trash the preference file (com.apple.systempreferences.plist) and then restart the computer.
    Barry

  • Why can I access Internet, and get my email through yahoo, but can't access email when I use the mail icon on the front of my tablet. It just started doing this today.

    Why can I access the Internet, even get my email by going through yahoo, but as of this morning I can not access my email from the mail icon on my tablet screen. It just started doing this today. When I try to get my email by going through the icon, I am asked to enter yahoo password. I do this, then the box just pops up again, and again and again never letting me get signed in. Don't know what I am doing wrong. Need help!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • After installing Yosemite upgrade, can't access documents and files

    I installed the Yosemite upgrade without making a proper backup first, not realizing what a major upgrade this is. During the install, I was prompted to create a new user account. Now that the upgrade is complete, when signed in as the new user, I can see my files and documents listed in a Device called “Guest’s MacBook Pro,” but when I try to access them, I’m told I don’t have permission to see the folders' contents.
    I should add that I bought this machine used, and I have always used it under the name “Guest.”
    Please help me access my stuff! Thanks in advance.
    EtreCheck version: 2.2 (132)
    Report generated 5/2/15, 11:47 AM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 140 - SN = 9G2150ZCUD3MB
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: one day 0:3:24
    Disk Information: ℹ️
        APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (429.05 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. iPhone
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/MacKeeper/AntiVirus.app
        [not loaded]    net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
        [not loaded]    net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        5 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.corestorage.corestoragehelperd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.findmymac.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.installd.plist
        [failed]    com.apple.mtrecorder.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.wdhelper.plist
        11 processes killed due to memory pressure
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [failed]    com.apple.spirecorder.plist
        [running]    com.mackeeper.AntiVirus.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [running]    com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             5%    hidd
             5%    WindowServer
             3%    ClanLord
             1%    Google Chrome Helper(12)
             1%    fontd
    Top Processes by Memory: ℹ️
        1.20 GB    Google Chrome Helper(12)
        488 MB    kernel_task
        164 MB    Google Chrome
        147 MB    ClanLord
        78 MB    mdworker(7)
    Virtual Memory Information: ℹ️
        47 MB    Free RAM
        3.95 GB    Used RAM
        140 MB    Swap Used
    Diagnostics Information: ℹ️
        May 1, 2015, 11:43:03 AM    Self test - passed

    MacKeeper – Do Not Install
    MacKeeper – Do Not Install (2)        See  SDW2001’s post
    MacKeeper Removal
    MacKeeper Removal

  • My wife has a separate User Login. How can she access photos and documents on my User Account?

    What do I need to do under my wife's user login so she can have access to photos and documents on my user account?

    Move the data you want to share to the hard drive level Users/Shared folder and she will be able to access them. You may have to do a Get Info (command - I) on the folder and add her with read/write permissions, then select the gear at the bottom and Apply to enclosed items.

  • Can't access CMC and infoview on BO edge series 3.1

    Hello gurus,
            I have just installed BO edge series 3.1, immediate moment after installation, I can open CMC console, but after I 've done other operation on the computor, CMC can't open now, also I can't open infoview, error shows " can't establish connection to server", but other features work well. how can I resolve this issue?
    Many thanks,

    Hi,
      I will clarify following facts:
    (1) I used "typical installation " for Edge3.1
    (2)  all are installed on windows XP
    (3) I have restarted computor several time, CMC and infoview can't be launched either.
    (4) other features work very well.
    (5) after I installed Edge 3.1, CMC and infoview were reached for one time, after that, I installed crystal report 2008, this report designer can't be started, so unstalled it. then try to access CMC and infovew, it failed.
    Many thanks,

  • Can't access loops and samples

    Hi,
    I have posted this on the regular SoundTrack discussion list and have not received an answer.I am not really sure which list this belongs on since it is SoundTrack Academic. Here's the issue: My computer is shared. I am the administrator and can access SoundTrack and all its features. Other users who are not administrators can not access the loops and samples. I did create another admin account and that account also can not access the loops and samples. How can I make the loops and samples available to who ever uses this computer? Thanks.

    Logged in on one of the other accounts, open STP and under the Search tab, click the Setup... button at the top right. See if you can browse to the folder where the files are located (probably something like: /Library/Audio/Apple Loops/Apple Loops for Soundtrack Pro, and /Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand). If so, just add that/those folder(s) to the Folders Indexed list.
    Try that, then report back.
    tim

  • Can't Access Windows and Storage Paritions

    I've been trying to figure out how to access partitions on my system other than the Arch Linux partition. I am currently using KDE and I suspect the problem my arise from here. If I just boot into a console or open up one with Ctrl+Alt+F2, I can manually mount and access all drives. Additionally, if I am logged into KDE as root, I can still access all drives. The problem only appears when I attempt to access the drives as a user. I have given the user all administrative privileges. When I click on the drive to access it, however, Dolphin prompts me for a password. Naturally, I enter the password I use for the root user but that seems to be the wrong password. After a few more attempts with different passwords, I get an error saying:
    "An error occurred while accessing '60.0 GiB Hard Drive', the system responded: An unspecified error has occurred: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
    I don't know why I would be blocked from accessing this drive especially since I have the root password.

    It's asking for your user password; not the root password.
    Is your user account in the sudo group?

  • Can't access youtube and google docs.

    I can't access some websites, like youtube (I can only see a page with text and links) and google docs (firefox stops downloading like everything is correct, but nothing happens). Allready fully uninstalled (as far as I know, forgot bookmarks, passwords, etc....) firefox from my OSX 10.6. Installed it again and find the same problems. Other browsers have no problem with these websites. thanks. No errors reported by firefox.

    If it works through the Ethernet port on the AirPort Extreme base station (AEBS) it probably has nothing to do with the AEBS. There must be something about the configuration of the computer connecting wirelessly.

Maybe you are looking for