Can't access Raw files in Bridge CS3

I have recently had to purchase a new computer (Acer) and have re installed CS3. When I open Bridge none of RAW files are showing and bridge doesn't say I can open any images in RAW. I use windows XP
I have dowloaded the ACR4.6 from the Adobe and believe I have installed it correctly.
The Acer machine is a Veriton M670 and has a Intel Core 2 processor.
I hope someone can help me.

rufflesian wrote:
I moved the old version to a separate file I created as suggested.
I assume you mean folder (directory), not "file".
Make sure that folder is completely out of the way of the path to Photoshop, nowhere near your application directory. Either put it in your Documents folder or delete it.

Similar Messages

I can't delete raw files in bridge

I can't delete raw files in bridge anymore. I used to and it worked. Now if I click delete button, nothing happens.

Adobe doesn't support CS5, an when I spoke to Apple, I was told that this is a known issue with OS 10.8.5 and that they're working on a patch. In the meantime I'm using Adobe's DNG as a workaround.
Have not heard before of this Known Issue, also find it hard to believe being true. But can't test my self because I only have CS6 and CC installed and always use Photodownloader to convert to DNG upon import. I have just installed the 10.8.5 update and checked in Bridge CC pointing to an attached card reader. no problem in showing the CR2 thumbs, it works as always and as expected.
To my knowledge Bridge CS5 is already 64 bits and I can't think of any valid reason why an OS update would cause this problem so suddenly (but I'm not a technician I have to confess…)
However, I would first try a check and repair permissions from Apple Disk Utility and also try Cocktail (good and cheap 3th party maintenance application for Mac) to clear caches and check permissions.
Also try a new user account just for testing to rule out your current account as the culprit.

Can't preview RAW files in Bridge CC, administrator issue?

Can't preview RAW files in Bridge CC.
When i try to upate Bridge, it says:
Bridge is unable to check for updates, cause it can't connect to the internet or user is logged in as a non-administrative user.
So then i have to log in as a administrative user to the Bridge...and update..
Can't it be done easier???
I must also say i have also Bridge CS6 installed on pc and there everything is working fine.
Thx.

1/ Adobe Bridge should be possible to open without administrator issue.
By default it does, something seems wrong with your install
2/the images DO appear first for 2 or 3 seconds , then it turns to a RAW file icon.
Again indicating a wrong install, you see the embedded jpeg previews briefly but then the Raw thumbs should be build. When you see the generic Raw icon this means you don't have the correct version of the ACR plug in installed to match your camera or no converter at all.
Try this page:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
3/i only succeed in openening Bridge descently , so with ableing to see RAW files , WHEN i go to c:/progamfiles/Adobe/AdobeBridhecc/Bridge.exe
When, If i copy the exe file for opening Bridge CC and i put it on the Desktop, it DOES NOT Preview the RAW files.
Here you have lost me. As a Mac user I'm afraid I don't know nor understand anything about .exe, I download the .dmg file for an application which then automatically opens and I just click on the install icon, provide admin password and serial number once and then start using it without bothering about install ever again

Opening RAW files with Bridge CS3

When I try to open a RAW file from Bridge CS3 it defaults to Mac Preview and does not open Photoshop Elements 6 RAW converter. If I open a RAW file outside of Bridge it work fine. What did I do wrong?? Using a iBook G4 with OS 10.5.8 and Photoshop Elements 6 and new Camera RAW plugin for my Panasonic LX3 camera. hjz62

Bridge requires the latest version of Adobe Camera Raw to be installed. http://www.adobe.com/support/downloads/detail.jsp?ftpID=4581 Adobe states that this is the latest version of camera raw compatible with PSE-6 Mac. Others may have additional information.
As to the issue of defaulting to Apple software, this issue is usually a configuration problem wherein certain file extensions are granted permissin to be summarily opened by a given program. ((Right clicking any given file, then choosing "open with", and selecting a given program is a work around, but to avoid this step, you need to reconfigure your program settings.)) This is the Windows file path/solution, I am not familiar with Mac. I am confident that the issus is the same

I can't preview RAW files in Bridge CS5 or open them in Camera Raw

I've been using Photoshop CS5, Bridge and Camera Raw 6.7 with no problems whatsoever. I recently upgraded the OS on my MacBook Pro to 10.8.5 and can no longer preview RAW files in Bridge, or open them in Camera Raw.
I've downloaded the Adobe DNG converter, but would much prefer to using my existing workflow if possible.
Any suggestions? Thanks in advance for any help!

Adobe doesn't support CS5, an when I spoke to Apple, I was told that this is a known issue with OS 10.8.5 and that they're working on a patch. In the meantime I'm using Adobe's DNG as a workaround.
Have not heard before of this Known Issue, also find it hard to believe being true. But can't test my self because I only have CS6 and CC installed and always use Photodownloader to convert to DNG upon import. I have just installed the 10.8.5 update and checked in Bridge CC pointing to an attached card reader. no problem in showing the CR2 thumbs, it works as always and as expected.
To my knowledge Bridge CS5 is already 64 bits and I can't think of any valid reason why an OS update would cause this problem so suddenly (but I'm not a technician I have to confess…)
However, I would first try a check and repair permissions from Apple Disk Utility and also try Cocktail (good and cheap 3th party maintenance application for Mac) to clear caches and check permissions.
Also try a new user account just for testing to rule out your current account as the culprit.

Can't open raw files in bridge from canon 70d

I am a windows user, and I've updated my camera raw to the most current available...6.7. But when trying to open raw files in Bridge it says that my camera model is not supported by the current software. What else should I do?

Which version of Camera Raw do you use (Photoshop > About Plug-In > Camera Raw) and which one is needed for that camera?
Camera Raw plug-in | Supported cameras

Couldn't open RAW files in Bridge Cs3

Hi,
the RAW files (CR2) cannot be opened/developed with using Bridge CS3. When I double click the file (CR2) in Bridge, it just gave this prompt in Photoshop, "Could not complete your request because Photoshop does not recognize this type of file."
I used to be able to open Raw files in my friend's G5 using Bridge. When I double click the file, it will automatically open the Canon Camera Raw with settings for me to adjust before I develop the picture. However when I tried on my own computer, it came out the prompt I mentioned above.
Please advise what is the problem with my Bridge. Do I need to reintall the whole of Adobe suite?
Thank you so much.

Brian
first check again the right location of (only one!) ACR plug in (see post 3 of this thread for details)
Then quit Bridge, in user library go to preferences and manual trash the plist file for Bridge (com.adobe.bridge2.plist), restart again with option key and again reset prefs.
If this is still not working create a new user account and check if Bridge is working correctly in this new user, if so your user account is corrupt and you should do maintenance for the OS (Archive and install).
If still no luck go again to the user library/cache/Adobe/BridgeCS3/cache. This cache file can grow to the enormous portions, check the size and if you wish make a copy for back up. Then delete this whole cache file by dragging it to the trash. Again delete plist file and again restart option to refresh prefs. By deleting the cache file you will need to recache all your folders so it is a very hard way but it worked for me several times.

Can't Open jpeg files from Bridge CS3 to PhotoShop CS3

This is really weird. I had a trial version of CS3 and bridge worked fine. That ran out, so I tried CS2 to see if I could get by with the older version. CS2's bridge worked just fine.
Then I installed a full version copy of CS3 and removed CS2 (to free up space) and for some bizarre reason, I cannot open any files from bridge into Photoshop. It's the CS3 bridge because I clicked on the Help, About Bridge and it showed CS3.
When I just click "open" under file, it tries to open with Illustrator. When I click, "open with" I get this list: Adobe Illustrator CS3 (default), Firefox 2.0, Internet Explorer 6.00, and Paint 5.1.
I can't figure out a way to change the default to CS3, and it worked fine with the trials.
Please advise.

It was a nice thought. I just did it, and associated all .jpg type files with photoshop, but no such luck in solving issue. I did figure out a way around it that kinda works, but not nearly as convenient. I drag select a group, then hold-click on the group and toggle into Photoshop, then let go. It pastes the group there. However, if I control click to select a group (or deselect within a group), I can't hold-click. So I have to do smaller groups at a time if I want to bypass certain pictures that get grabbed in a bigger group--does that make any sense at all?

Cannot open my G11 raw files in Bridge CS3.

I just downloaded my G11 raw files onto my computer. Usually, I do a quick glance in Bridge CS3 but they do not open. I do have Photoshop CS4, but that doesn't help me, right? What do I need to do to open these? I've already updated my Bridge CS3 to 2.1.1.9.
I am using Mac G5, OS 10.5.x.

But be aware that CS4 comes with ACR 5.0
You will need to update it to version 5.6 for the G11.
It's on this page: http://www.adobe.com/downloads/updates/

Suddenly Can't Open RAW files in Photoshop CS3!

I have never had troubles with photoshop before, but since I installed windows 7 and reinstalled CS3, Photoshop is no longer able to open camera raw files! When I attempt to open one a window pops up stating: Could not complete your request because it is not the right type of document. What on earth is going on?! Any help would be greatly appreciated!
Thank you

Thats Correct. First check if there are two versions or not if there is, then it would be better to delete them and re-download it from this link
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4038&fileID=3755
After the download unzip the files and then copy the Camera raw.8bi in this location
>>> C:\Program Files\Common Files\Adobe\Plug-Ins\CS4\File Formats
PS :: Use Program Files and Program Files(X86) according to your computer.

How can I access RAW files from a Canon 650D on PSE 9 or 10?

We have versions 9 and 10 of PSE to install on two computers, upgrading from version 6 on one of them.
We have two Canon cameras - a 450D and a 650D - and have taken RAWs on both. The 450 works fine with PSE6, but we can't get PSE 9 to take a RAW converter new enough to read the 650 files.
We don't really understand the difference between CR2 and DNG so don't know what we might lose if we used the DNG converter for the 650 RAW files.
Pat & Mike

You'll have to upgrade to PSE11 to get native support for the 650D, or use the DNG converter to make your files compatible with an earlier version.
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?

I can,t open raw files in Bridge/Photoshop CS5 from my Canon Eos 6D. I succeeded in transfering from my camera using Bidge

I need help

Which version of Camera Raw do you use (Photoshop > About Plug-In > Camera Raw) and which one is needed for that camera?
Camera Raw plug-in | Supported cameras

Can anyone help me as to why my raw files in bridge are not showing as thumbnails as they normally do . I can seem to fix it

Can anyone help me as to why my raw files in bridge are not showing as thumbnails as they normally do . I can seem to fix it

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

Sounds like you somehow got the mac version.
Download the windows 6.7 camera raw update from this link:
Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

Inconsistent Previewing Raw Files in Bridge

About two weeks ago, without warning, I was no longer able view my raw files in bridge. The strange thing is, when looking at raw files from a CD in bridge, it will give a preview of about 75% of the files. I am running leopard on my MAC OS X 10.5.4, using CS3, 1) always updating when it needs to be 2) i have reset all my preferences in bridge. Has anyone else run into this problem? Cheers

This sounds to me like you installed the updated plug-in incorrectly.
It's a common mistake to pick the wrong plug-in folder when copying Camera Raw. Unlike Photoshop plug-ins, plug-ins which work in Bridge must be installed in the 'Common Files' directory branch. On my computer, Camera Raw (Camera Raw.8bi) can be found here:
C:\Program Files\Common Files\Adobe\Plug-Ins\CSx\File Formats
Similar Photoshop-only plug-ins are located here:
C:\Program Files\Adobe\Adobe Photoshop CSx\Plug-ins\File Formats
Note that they are similar but different, and consequently quite easy to confuse. Also note that you should ONLY HAVE ONE copy of 'Camera Raw.8bi' installed (or two if you're running 64-bit Photoshop). So, if you previously installed the update in the wrong place, you should remove it, and put it in the correct place.
Hope that helps.

Can't access Raw files in Bridge CS3

Similar Messages

Maybe you are looking for