Can't Activate ADOBE PHOTOSHOP CS4 UPG

Hello,
I have been using Photoshop ever since version 7 (having switched over from Corel's software, used previously for about 10 years) and had success with it.
I upgraded to ADOBE CREATIVE SUITE when it became available through the Adobe upgrade option and used that with equal pleasure.
In 2010 I upgraded to ADOBE PHOTOSHOP CS4, again by means of an upgrade version with no trouble.
I have switched to a newer, faster computer last week, but I have been unable to re-install my Photoshop CS4 on my new computer because I am not able to activate the program.
When I tried to install the program it refused to activate based on the serial number of my Creative Suite, stating that it was not a valid serial number for this product.
I have successfully installed this product in the past, more than once, using that same CS serial number with no problem arising until now.
I am requesting your assistance to get back to being able to use ADOBE PHOTOSHOP CS4, which after all I did purchase in good faith.
I am now retired and living on a fixed income which does not allow me the flexibility to purchase replacement software indiscriminately and I really need your help to solve this problem.
Please advise me of a solution or a workaround so that I can still use my software.
Thank you very much for your kind assistance.

it's not clear in your post, but it appears you may own a stand-alone ps version (cs4) and some creative suite version.
if your ps cs4 is part of a suite, you need to use the suite installation files and suite serial number. if your ps cs4 is a stand-alone, you need to use the stand-alone ps cs4 installation files and stand-alone serial number.
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Download and installation help for Adobe links https://helpx.adobe.com/download-install.html
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Similar Messages

Where can I download Adobe Photoshop CS4 Ukrainian version?

Where can I download Adobe Photoshop CS4 Ukrainian version? I can't found any download link in my account, only product key available.

Privjet!
You can download the old versions here: Download and Installation Help | Download and Installation Help (Scroll the page) but there is no Ukrainian version.

Can I use Adobe Photoshop CS4 Extended on my brand new iMac? I had PS on my old Mac using the student licensing.

About four years ago, I purchased Adobe Photoshop CS4 Extended while I was in undergrad. I downloaded it to my Mac. Since then, I've purchased a brand new iMac. Can I use this same software? I know it's been four years so the software is very updated, AND my new iMac does NOT have a cd drive. This may all be in vain. I'm just clueless! Thanks!

Emalexander89 you are welcome to install Photoshop CS4 on your new Mac. You can download a fresh copy of the installation files at Download CS6 products.

I can't install Adobe Photoshop CS4 extended at all

I downloaded Adobe Photoshop CS4 Extended (Trial Version) from the Adobe.com website through Akamai downloader. Well, i tried to install it clicking on the set up, but it started to install and a few minutes later stopped and displayed a error message. The message, without error code identifications, just informed that there was an error during the instalation and Adobe bridge and another one could not be installed.
I tried again and it started, but when it was almost finishing another message appeared warning that "there was an error during the instalation(again no code error identification) and that Photoshop could not be installed.
I follow some tips like shutting down the firewall, AV, but it didn't work. I used the system restoring so that i could completely clean up remaining files and tried to reinstall it, but again nothing.
Has anybody any idea?
Thanks
lucyniccio

Hi again.
John Joslin wrote:
There is a difference between being the Administrator on the computer and right-clicking on the Setup file and choosing "Run as Administrator".
I know that John, when i said that i usually run the system as administator, i meant that i logged on as administrator. Sorry if i caused a misunderstood.
I decided to format the computer again. Perhaps, some problem during the system instalation may have caused this problem. After that, i'll try to install it and see what's gonna happen. I've decided to do it because If it is caused by an instalation error of the main system, it may also cause hassles when using other softwares. But if it is not caused by an instalation error i'll come back to get help.
Thanks for responding
lucy

Can I activate Adobe Photoshop Elements without Internet?

I bought three versions of Adobe Photoshop Elements for my high school class. We don't have internet where our production studio is. Can I activate without the Internet, and if so, how?

Yes by completing the offline activation process. You will still need a smartphone or some other Internet connected device to complete the offline activation process.

Can Adobe Photoshop CS4 be used for 3d modeling?

hello, I know Adobe Photoshop Extended can be used for 3d modeling but can just the normal Adobe Photoshop CS4 be used in the same way because i dont feel like buying it for $1000 but I need Photoshop for my 3d models for texturing. So can the normal Photoshop be used the same way as the Extended can and will not make a difference? Thanks
Stephen

I know Adobe Photoshop Extended can be used for 3d modeling
No - it can't do 3d modelling - what it can do is 3D rendering, to some extent. Photoshop CS4 extended only has primitives (cubes, rhombus etc) and these are not editable. So full 3d rendering is not possible. You have to load in models created in other software,
Extended's 3D capabilities are in the process of development - meaning that they decided to INTRODUCE it into CS3 and 4, but its far from the finished article. Both in terms of interface and capabilities. Now the rendering, animation capabilities, and ease of use is better than most people realise - but it sill has efficiency, and design problems, which need to be reassessed. Its more like BETA2 than finished product.

I can't install the adobe photoshop CS4

Hello. I've a problem. I installed adobe photoshop CS2 a few days ago. So, today I wanted to install adobe photoshop CS4, but I can't. The program reports "fault install, Internal Error 2739 ". I don't know what does it mean and what I do. Please, give me some advice. Thank you for your help.

It's working. I don't know how to say thank you. Thank you very much.

Is there a store in HongKong where you can buy Adobe Photoshop CS4 Extended?

Um... Does anyone know where in HongKong I can buy Adobe Photoshop CS4 Extended? And how much does it cost there?

I would think that Adobe would have a list of authorized re-sellers. If not, then contact their International Sales Dept., and inquire. That should get you a list.
Happy shopping,
Hunt

Adobe Photoshop CS4 won't open in Yosemite. Anything I can do about this?

After installing Yosemite I was told that in order "To open Adobe Photoshop CS4 you need to install the legacy Java SE 6 runtime.
Unfortunately I was also told that I needed to upgrade to Java 8 update 25...which I did thinking it would also resolve the Photoshop issue.
Silly me!
It probably made things worse as far as the possibility of opening Photoshop CS4.
Now what do I do?
I don't want to go back to Java 6. Are there any other options?
Thanks.

Thanks Rikk. Now the problem is installing legacy.
Every time I select the "install" option I get a blank screen.
I've been reading other posts about this and it may have something to do with Safari.
I'll try another browser and see what happens

Where can I download Adobe photoshop extended CS3 from the internet - I need to reinstall on a new computed that does not have a CD drive!

My new computed does not have a CD drive and transferring software onto a jump drive does not seem to work even after deactivating the software on the old computer. Can I download Adobe photoshop extended CS3 from the internet?

Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
Here is an alternate download... You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Error in VBA reference for Adobe Photoshop CS4 Object Library

Hello,
I'm using Windows 7 Pro, MS Office 2010 Pro and Creative Suite CS4 (with all updates).
I will automate Photoshop via Visual Basic for Applications in MS Access.
Befor using there the Adobe Photoshop CS4 Object Library I must reference it in VBA.
But when I will du this, I get the message "Error loading DLL".
When I will manually reference to the WIASupport.8LI File, I get the error: "Cannot reference this file"
Can you give a tip, how I can solve this problem?
Regards

I have the same problem! I have photoshop cc2014 (which we own) and the object library shows, but not for cs 5.1 (30 day trial).
Does registering unlock something?
Help please!!

Adobe Photoshop CS4 Installation Error

I'm new to this site and my computer has Vista Home Premium Service Pack 1.
After I installed Photoshop CS4 trial, it failed to install Photoshop, but the rest were successful. I went to get more information and this is the message:
Adobe Fonts All
Error:
Error 1603. Error 1907.Could not register font . Verify that you have sufficient permissions to install fonts, and that the system supports this font.
Adobe Photoshop CS4 English Language Pack
Error:
Error 2.
If there is a topic similar to this one, then I shouldn't be here!

I have been using Adobe Photoshop CS4 for a few months now without any problems or errors.
But last week.. i had a virus problem and decided to do a Clean Installation of my Operating System.
I was not too worried because I have done this millions of times already... and know the process like the back of my hand.
Well.. after the clean installation was complete, i started to load my applications.
To my surprise.. Adobe Photoshop CS4 would not install. Nor would Adobe Illustrator CS4.
It would get to the screen "Adobe is beginig the installation process" and would stall ..
At first... i thought it would eventually complete on it's own.. but after a few attempts and hours of the same screen with no progress.. it was obvious Adobe was no longer responding at that stage.
I searched high and low, night and day, over a few days trying to figure out the problem.
I was trouble-shooting everything.
In the middle of trouble-shooting, i took a break to surf the Net and see if i could find any suggestions when i ran into this Forum.
Someone mentioned disabling your Internet Security & Windows Defender.. and i thought.. no way.. it can't be that easy.
Well.. what do you know.. it was my Internet Security (Kaspersky Internet Security 2010)
After disabling Kaspersky Internet Security 2010, Adobe flew right pass the part where it was stalling, and finished installation without incident.
Adobe Illustrator CS4 also installed without any problems ...
I just wanted to share my experience as i know how frustrating it can be when software refuses to install.
Good Luck to everyone.. be patient.. trial & error. .. and im sure you'll figure it out.
========================================================================================== ===============
ApologetX wrote:
"downloaded Photoshop CS4 here and i tried to install as trial (30 days), Error: "Please insert Photoshop C4 into drive E:/ to continue instalation" what's wrong? What should I do? To install free trial? Tks"
@ ApologetX
I had a similar problem when i extracted the contents of my Adobe DVD and made an ISO file out of it so i would no longer need the DVD for installation.
But what i realized is that.. Adobe will not install if it's installed from the ISO.. and during installation.. an error would pop up.. and ask for the DVD
You probably have done something similar.
Here's what i did to fix:
- Extract the contents of Adobe Photoshop CS4 into a Folder
- and install from that ..
After i extracted the contents and installed from "setup.exe" .. the installation completed without error ..
DVD
- If you're having problems from the DVD .. then try to extract the Contents of the DVD on to your Desktop..
and install from there ..
Trial Installer
- As for the Trial you are referring to .. im not familiar with it ..
but try to extract the contents of it to your Desktop .. and go from there ..
Good Luck

Problem installing Adobe Photoshop CS4. Please help me.

Hi Geeks,
I am stuck with Adobe Photoshop CS4 (Trial) installation since last two days. I am desperately looking for help to get rid of this problem.
My Problem:
At the end of installation of Adobe Photoshop CS4 (Trial) i was prompted with en error
message stating some of the components were not installed. When I check the more information button provided in the error message window, it showed below error.
“Adobe Photoshop CS4 English Language Pack Error: Error 2.”
Still I could find the installed Photoshop in C:\Program files\Adobe\Adobe Photoshop CS4\Photoshop.exe
When I executed above file; application showed below error message and close it.
“Some of the application components are missing from the application directory, Please reinstall the application.”
I just try to run Adobe Device Central CS4 which was installed along with it. It showed below error message.
“The Localized resource files for this application could not be loaded. Please reinstall or repair the application and try again.”
So My Problem is I am unable to open Photoshop CS4 after its unsuccessful installation.
I spent more than a day in different ways as I explained below in more info section. I am desperately looking for helping hands to fix this problem.
I ever find this kind of difficulty with any other components installation in my 10 years of development experience. Please help me.
More info:
(1) I have downloaded Adobe Photoshop CS4 (Trial) in this month (July 09) from adobe official site.
(2) My PC OS Windows XP SP3.
(3) Prior to install Photoshop CS4 I had Acrobat reader 8 and Adobe DW CS4.
(4) After I read some stuff on net, I downloaded both Windows install Clean up and CS4InstallerDatabaseUtility.exe.
(5) First I uninstalled all DW CS4 and Photoshop CS4 using add/remove then rebooted.
then ran CS4InstallerDatabaseUtility.exe (which really did not removed as it did not
find any Adobe component), then installed Photoshop CS4. No luck. same error.
(6) This time I ran CS4InstallerDatabaseUtility.exe and removed DW CS4, Photoshop CS4 and flash and rebooted. Then I ran Photoshop CS4 as Administrator. Same thing repeated at the end of installation and when I tried to open the photoshop. Finding a real hard time with it.
Any kind of help to get rid of this problem would be highly appreciated.
Thanks in advance.
Regards,
R Sunil.

PS CS4 software itself has to be installed as Admin. Put the downloaded folder on the desktop (if not there already). Open the folder and right click on the .exe file and choose run as Admin.
Install on C drive is the best stable choice.
Before you do all this make the anti-virus is turned off. If windows defender is running turn that off too. If Adobe reader is installed renove that. Ensure no other adobe products are running in the background.
During install the process will hang at 90 percent for about 10 to 15 mins. This is normal.
After the software is installed reboot computer.
After reboot go to start, All Programs and right click on PS CS4. Click on properties, Compatibility and check run as Admin. Hit Apply and OK to close. Run PS CS4 and update to 11.0.1
Be Advised:
Now the biggest problem you might run into is that the trial install went too far and failed. If this happened you cannot re-install PS CS4 trial because of the DRM that is hidden in the registry hive. The hidden DRM prevents people from installing the trial more then once and limits the trial at 30 days. There is nothing you can do other then nuking the hard drive and a fresh install of your operating system.

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Lr 4.1 won't "Edit in Adobe Photoshop CS4" properly

Hello,
Using Lr 4.1 w/ Camera RAW 7.1 and Photoshop CS4 11.0.2... When I try to edit a RAW file in Ps as I always have in Lr 3.x (Right click film strip >> Edit In >> Edit in Adobe Photoshop CS4) I get the following message:
This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.7 for full compatibility. Please update the Camera Raw plug-in using the update tool available in the Photoshop help menu. [Button options are: Render using Lightroom, Open Anyway, and Cancel.]
Render using Lr just keeps me in Lr, doesn't open Ps.
Open Anyway opens Ps, but not the image.
Using Ps >> help >> updates: says there are no updates.
But help >> About plug-in >> Camera Raw: shows it is only Version 5.7.0.213
Interestingly, if I go back to Lr and hit Edit in Adobe Photoshop CS4 >> "Render using Lr" and then immediately do it again, this time clicking "Open Anyway" it actually DOES open the image in Ps. I can edit and then when I save it takes a long time to write the TIFF format (several times longer than when previously editing through Lr 3.x),
Is there a fix for this so I don't need to do multiple steps to edit from Lr to Ps? And is there a way to update the Camera Raw in Ps from 5.7.0.213 to 6.7 since Ps>>help>>updates doesn't catch it?
Thanks!
Mike
System info from Lr>>system info:
Lightroom version: 4.1 [829322]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Physical processor count: 8
Processor speed: 2.6 GHz
Built-in memory: 12278.9 MB
Real memory available to Lightroom: 12278.9 MB
Real memory used by Lightroom: 1332.3 MB (10.8%)
Virtual memory used by Lightroom: 1365.3 MB
Memory cache size: 724.1 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080

You are going to have to render using lightroom in order to use the latest ACR updates since you can no longer get ACR updates for PS CS4. But when you click on Render using LR, it still should open in CS4 I would think. You might be able to fix this by telling LR that you have another editing program, CS4, and then select it instead of the generic photoshop at the top of the this. But I would not think that you would have to do this.

Can't Activate ADOBE PHOTOSHOP CS4 UPG

Similar Messages

Maybe you are looking for