Can't boot from windows 7 install usb drive created in bootcamp

So, my real problem is that my Windows 7 install won't boot after I installed some windows updates. I'm using OSX Lion and the latest version of Bootcamp. I've had Windows installed on my mid 2011 mac mini for only about a day. It had been working flawlessly so far.
Windows automatically downloaded and installed some updates and now it is broken.
When I attempt to boot windows I get a black screen that just hangs forever. No windows logo, no blinking cursor, no nothing.
I thought I could use my Windows 7 Install usb drive to maybe try and do a recovery or repair install but now my USB drive wont boot either. I get the same black screen.
Any ideas on why I can't boot even the install usb drive?
Note: this is the same USB drive I used to install windows the first time so it's definately capable. I've even used my install iso to re-create the usb drive installer and still nothing.

Install ISO means you burned DVD installer and did you reduce burn speed? otherwise it is a bad install.
3rd party updates? for security suite? stick to MS Security Essentials instead.

Similar Messages

  • I can't boot from OS install USB drive Mac Mini Model 1176

    How I can't boot from OS install USB drive, Mac Mini Model 1176

    Thank you Eustace Mendis for your answer.
    I rebooted the Mac Mini holding the Option key down but it doesn't work. I used an USB drive with O.s 10.7 from Apple that I have used previuosly with other computers and I also tried with a CD install O.S 10.6
    It seems that the Mac Mini can't recognize the keyboard inputs and I tried with 3 different keyboards but still didn't work.
    I also reset the SMC and PRAM but I had no luck. Any clues?

  • Can't boot from windows 7 usb installation media

    When trying to boot from windows 7 usb installation media no efi boot option availiable. Using "boot from efi file" option whith each and every .efi file on installation media results in a message saying "The selected boot device failed. Press <Enter> to Continue". 
    USB installation media created using original windows 7 iso image and couple diskpart commands(resulting in clean flash storage with a single active primary partition) plus simple copying of the iso image's contents on usb flash. 
    Enabling/Disabling SecureBoot doesn't have any impact whatsoever. 
    Installation boots from aforementioned media successfully when CSM enabled, though i would really prefer installing Windows 7 in uefi mode. Which microsoft claims Windows 7 supports. 
    Any help or suggestions would be much appreciated. Thanks in advance. 
    PS: my disappointment in this particular HP notebook is unspeakable. Aside from issue of the current topic, It keeps defaulting to windows boot manager when dual-booting windows & linux no matter what i do, and windows 8.1 Pro is constantly BSODing whenever i try to run fullscreen games on high-performance GPU whith every graphics driver i could possibly install (including both hp's own and amd's). Found silly workarounds for both of these issues, however still hate HP treating it's customers that way.

    Booting from USB 2.0 port or DVD with SecureBoot disabled gets me to a screen saying "starting windows", just before the actual setup begins and then system simply hangs. Still unable to install. Thanks for your suggestion though.

  • Changed my iMac but Can't Boot from Windows

    I'm using iMac 21.5 with Mac OS X 10.6.6
    All programs are updated.
    I used to have iMac 24, but i removed it's hard drive and installed it on a new iMac 21.5
    i can't boot from windows 7.
    what should i do ?

    Can you boot into safe mode ..... because if you can you can also reach "repair computer"! so reboot your windows partition, as soon as the bios appears start pressing F8 until you see "Advanced Boot Options" when you get there choose, "Repair your Computer" (1st selection on the page) and go to "Startup Repair" .. selecting that will cause Windows to attempt to repair the boot sector of it's partition, if it succeeds you'll be able to boot, if not no data will have been lost.
    However please understand that without a backup of your windows partition data loss is a possibility under these circumstances. Windows hard drives almost never boot when moved from one installation to another. Read that last bit twice.
    Good luck
    Message was edited by: Csound1

  • BOOT FROM AN EXTERNAL USB DRIVE???

    I know apple has made it clear about booting from an external USB drive
    http://docs.info.apple.com/article.html?artnum=106474
    but I know that there are people who are able to boot from an external drive, does anybody know how to do this?
    It's just that id like to work on final cut studio on an external drive for various reasons:
    1st: my powerbook's HD is small and slow (60gb)
    2nd: my external usb drive is big (160 gb) and fast (7200 RMPS!)
    so a little help would be apreciated
    best regards

    "Actually, USB II is faster than FW 400."
    In theory, probably. In real life Firewire 400 is much faster than USB2, not to speak of Firewire 800:
    "Wee Wiebetech" Portable FireWire/USB2 Drive Challenges The Fastest Competitors.

  • Can't boot from Recovery or USB Install Drive

    Hi Folks,
    My (mid-2011) MacBook Pro [Mavericks (10.9)] is not booting up – not matter what I try.
    I've tried booting into Recovery (using command-R), Internet Recovery, and tonight I finally created a bootable USB install drive – no luck there either (pressing option to get to the startup disk manager). I can select which drive I want to boot from, but after selecting the USB drive and clicking on the arrow, I get to the gray apple screen (with the spinning progress wheel), and then it just stalls on a blank light gray screen (and the fans spin up). I've waited up to 45 minutes in this state, still nothing.
    The same thing happens when I try to boot normally. I have Filevault 2 enabled, so I get to the user account screen – but after selecting my account, the machine goes from the gray apple startup screen to the blank gray screen and hangs.
    I've tried resetting the NVRAM, booting from an install CD, etc., etc., and nada.
    Does anyone have any advice where to go from here? I had hoped the USB install drive would be the answer, but for whatever reason, I'm simply having no luck. Any help would be greatly appreciated – this is my main rig and I can't afford to have it down for much longer…
    Thanks so much!

    What install "CD"?? (sure it's not a DVD disc) did you try.
    Not sure it is related to the Filevault system but if you can't get the Recovery HD partition to boot that may be caused by having Filevault enabled.
    Have you tried the Real Online Internet Recovery system? Hold down the Command + Option/Alt + r keys at startup and keep holding them down until you see a globe on the screen. If after you see the globe, or you never get a globe on the screen, and you get that same Grey color on the screen then you more than likely have a hardware problem. You should make an Appointment with your local Apple store Genius Bar for your Mac to be properly diagnosed.

  • Hard disk errors, but can't boot from the install DVD

    My mini reports disk errors when I run the Disk Utility Verify on the main boot hard drive. However, I have not been able to boot the computer from the install DVD. I try restarting while holding down the C key, and still it boots from the internal drive. I've tried option-restart, and do not get the opportunity to select a boot disk. An external USB drive, on which I periodically clone the main disk, now does not mount. Disk Utility says it too has errors, and it is unable to repair them. A third external USB drive appears to be OK.
    The computer is still operating, apparently normally, otherwise. This computer should still be under warranty. I bought it in April, as I recall.
    Any help will be much appreciated.

    <sigh>
    I've attempted most of these things.
    The drive on which I had the system clone died at essentially the same time as the problem came up with the errors on the main drive. I suspect this was due to the same root cause, or a related problem, just because of the timing. I'd cloned the main drive approximately a week previously with apparently no problem.
    I also have been unable to boot from the install DVD.
    The other external drive, the one that still works, is one I use mostly for rolling backups of my documents, photo and music folders. It is not big enough to hold a clone of the main drive. In any case, I'm assuming that if I attempted to clone it now, it would either not work, or I'd simply copy the errors to the clone.
    I haven't used the Time Machine, since I didn't feel I had an external drive large enough to make it useful.
    What 3rd party software do you recommend? Keep in mind, as I also mentioned earlier, that the computer is still under warranty, and I'm loath to do anything that could be construed as voiding the warranty.
    I'm also on a pretty restricted budget, due to recent car repairs.

  • Can't boot from DVD or external drive

    Because of recent slow performance on my iMac G5 I ran disk utility and repaired permissions, then clicked Verify Disk. It reported minor errors in directory files and said I should repair them. I tried starting up from the MacOS X installation DVD, but I get a spinning beach ball and a symbol with a circle with a diagonal line through it (like a Do Not Enter sign). I had to unplug the computer to reboot.
    Using another computer, I made a startup disk on an external hard drive and tried booting the iMac from that, but I get the same beach ball and symbol. Tried another OS X DVD with the same result.
    I am able to boot from the internal hard drive only, but then I can't do a disk repair. I have already reset the PRAM, but that didn't help.
    Any suggestions ??? Thanks.

    Because of recent slow performance on my iMac G5 I ran disk utility and repaired permissions, then clicked Verify Disk. It reported minor errors in directory files and said I should repair them. I tried starting up from the MacOS X installation DVD, but my G5 still starts from the hard disk and I am therefore unable to repair rthe hard disk.
    Can I create a new startup disk by copying my installation disk, leaving off the installation software, and then start my Mac using Option "C".
    On my previous Macs I always used Norton Utilities to repair my disk and recover files - are ther any similar packages available for OS X (10.4.7)?

  • Can I boot from tiger install disk without wiping my hard drive?

    I have an old mac install disk with tiger on it and I want to be able to boot from it. Can I do that without damaging my hard drive?

    You can boot from it, but if you continue through without stopping eventually it will try to install Tiger. However, if you want to install Tiger on a USB flash drive or HDD, then when you arrive at the screen for selecting a Target device, be sure to select the USB device before clicking on the Install button.
    If the USB device has not been properly partitioned and formatted already, then be sure you do this:
    Clean Install of OS X
         1. Boot the computer using the Tiger Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the USB drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    If you wish you can download any updates using Software Update preference panel.

  • I can not boot from DVD or USB to install

    I have a 27 in iMac with i7 processor. For reasons I wont get into (lets just assume I have the right reason) I want to do a complete fresh install of Snow Leopard and start completely over.
    When I use OPT to select the SL DVD to boot, all I get is the apple logo, no spinning wheel, i let it sit that way all night still didnt work. If I force boot the SL DVD using C, same thing. So I tried formatting an external USB hard drive as a GUID drive and had the install residing on there, when I use OPT when booting the USB is not an option, nor is is listed in startup disks either.
    I can not do a fresh install, and i have followed loads of tutorials online, but my DVD never does boot.

    You need the discs for your computer. No other discs will work.
    The retail copy of 10.6.0 doesn't have the necessary drivers for your computer, nor does 10.5. Your computer should have shipped with 10.6.1.
    I think the inability to boot from USB is due to an invalid operating system being installed on the drive.
    ~Lyssa

  • Can't boot from Windows XP Install DVD

    A couple months ago I wanted to use Boot Camp for the first time to install Windows XP Professional (SP3) on my iMac8,1, but I ran into a lot of trouble. I got a lot of support from you guys but I ended up scratching the mission because of a problem that nobody could help me with at the time (I sought support on IRC, too). I will adduce the links to the threads regarding the issues that were more or less solved at the end of this post.
    Today I decided to make a thread here and hope that this time somebody knows what to do, how to solve the weird problem that I'm having when I try to boot from the Windows XP Install DVD right after I partition the hard drive with Boot Camp Assistant.
    So when the iMac restarts, after I have inserted the disc, and tries to boot from it, I randomly get one of the following three possibilities on the screen (and nothing happens after it):
    http://img689.imageshack.us/img689/6725/p3201160.jpg
    http://img180.imageshack.us/img180/105/p3201161.jpg
    http://img684.imageshack.us/img684/2076/img0472zt.jpg
    I burned the disc myself, so it's not the original disc from Microsoft. I did try re-burning the .iso file multiple times (both with Disk Utility and with the application called Burn), to no avail. The disc works fine with VirtualBox!
    Please let me know if you have a possible solution and I will thank you for it greatly!
    Related threads:
    Weird Behavior After Multiple Failed Partitioning Attempts
    I Can't Partition My Hard Drive (Files Can't Be Moved)
    How should I go about this? (resetting my system with minimal losses?)

    Only thing that comes to mind is did you try multiple types of burn media? Also, did you try burning at the slowest burn speed?
    ~Lyssa

  • Can you boot from an external USB hard drive? (Neo2 Platinum)

    As I'm tempted to get a 160Gb drive for Linux and AMD64 XP installations.  But obviously it needs to beable to boot from it.
    Thanks

    I read a post recently about booting from a usb memory stick - I assume the principal is the same.  You need to make the usb drive bootable, in the same way that you would make a cd or a diskette bootable. In the example given about a usb memory stick, they suggested copying the contents of a win98 startup disk onto the memory stick.  Then, run 'sys.com' on the drive letter of the usb stick from the startup disk. Then, enable usb legacy support in the bios, and access the boot order to tell it to boot from the usb or legacy, I'm not sure which.
    What you're in essence wanting to do is to copy the xpcd to the usb drive, so the format and files, etc., are the same.  Then, follow with the usb legacy stuff, etc....

  • Can't boot from Windows partition or any external drives...?

    My iMac just stopped booting from both my boot camp partition, and any external drives. I tried booting from a bootable flashdrive with drive genius installed, but it just booted OS X. Despite holding TAB, it just boots normally, as if I wasnt even holding it. I also tried installing rEFit, but OS X still ignores it and just boots normally. What's going on?!

    ...wow....nevermind, i just realized that i was hitting tab not option...good lord...ive been running boot camp for a long time too...alright well...thanks anyway lol

  • New HDD + can't boot from anywhere, just Hard Drive

    HI I have a HP Pavilion dv6700 laptop with Windows Vista 32-Bit OS.
    I installed a new harddrive and ordered the original recovery dvds from the hp website for that model, but I can't get it to boot from anything but hdd, even if i change the booting order in bios and I also tried F8 but it only gives me one option to boot from hdd. I even tried a usb external cd drive., nothing works. How do I get the recovery installed on my laptop? Please help.

    Maybe reseat your ODD , also if you disconnect the HDD temporarily can u boot to ODD?
    I am an HP employee.
    "Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button or mark the post that solved your problem as the Accepted Solution. Thanks!"

  • K410: Can't boot from Windows 8 DVD

    I managed to screw up the partitions on my new K410 and when I tried to use the inbuilt recovery software I got the message "Lenovo service partition has been destroyed".  Not to worry I thought.  I'd only just setup the computer and had pretty much reached the conclusion that I'd like to do a clean build using an OEM Windows 8 DVD.
    I obtained an OEM DVD but I cannot boot from it or any other bootable media despite trying pretty much every BIOS setting.  The computer continues to load the Lenovo recovery environment and display the "Lenovo service partition..." message.  I also can't bring up the one-time boot menu (F12) which is odd as I made a Windows recovery DVD when I first got the PC and was able to boot from it at that time.
    I've performed a clean install of Windows on every computer I've ever owned and the fact that I'm having trouble with this computer is driving me nuts.  Can anyone help?
    Solved!
    Go to Solution.

    Hi Solid_Cruver,
    Thanks, for your reply.
    I tried following the steps laid out in the linked post but they did not resolve my problem.  I was beginning to get a little frustrated with the computer booting from the recovery partition so I decided to see if the computer would boot from a DVD if there was no hard disk plugged in!
    I opened the case up and unplugged the SATA lead from the HD.  The computer booted from the DVD first time.  I changed all the BIOS settings back to out of the box settings (i.e. UEFI, Secure boot, etc. enabled) and tried again.  Same result!
    I then connected the hard drive to my laptop using a USB to SATA cable and deleted all the partitions on the drive using DISKPART and the "CLEAN" command (FOR ANYONE READING THIS THREAD, PLEASE TAKE CARE WHEN USING DISKPART!).  I then reconnected the SATA and HD power lead back into the drive and put the side back on the case.
    At this point I started the computer up with a Windows 8 DVD in the DVD drive.  The computer booted from the DVD and I installed Windows 8 without any issues.  It even picked up the OEM key from the BIOS so that I didn't need to use the license that came with the DVD.
    I hope this thread may help others in the future.

Maybe you are looking for