Can't connect MBP to LCD projector using DVI-TO-VGA adapter

I am trying to connect my MacBookPro to a Hitachi CP-X885 projector, which I normally connect an IBM Thinkpad to at 800x600 or 1024x768. I also use my MBP and the VGA adapter to connect to other LCD projectors and monitors (so my adapter works, as well as both systems, projector, cables, etc.). Problem is, that when I connect my MBP to the projector (I have to connect it via VGA as there is a 250 foot cable that goes to the front where the rear-projection takes place). When I do the "detect displays" nothing is detected. I also connected directly to the projector using a shorter cable, same thing (doesn't detect it). So, is the projector not supplying some type of signal to the output, that the MBP wants to see?)... is there a way to FORCE the MPB to have output? I know that if there is signal, it will display (we have LOTS of notebooks that display to the projector just fine, BUT have SEVERAL MBP's, and NONE of them will detect, and we've tried several adapters (just to be sure)... HELP!... is there some way to FORCE output from the MBP instead of it having to DETECT IT???
Thanks!

Sorry Walter, but according to the Terms of Use (which you agreed to the first time you logged in to the Discussions and can be found if you click on the "Help" link to the right):
Do not post a URL unless it directly answers a user's question.
The URL you post does not answer David's original question. Also, it could potentially void his warranty because a firmware hack (and this is indeed a link to a "hack") is an unauthorized alteration to the hardware of his computer. ("Software" can only be installed on the hard drive and that hack is not installed on the hard drive, it's installed on the firmware on a chip inside the logic board.)
I don't want to take this thread off-topic, but your reply does NOT help David's situation. I would, however, value your input and anyone else's to this and any other topic in the Discussions as long as it is pertinent to the original subject.
-Doug

Similar Messages

I can not connect to projector using Thunderbolt to VGA adapter

When booting on Windows 7 using Boot Camp I am not able to connect to projector. I have a Thunderbolt to VGA adapter. It works fine when booting on Mac OS. Do i need to update any drivers or am i using wrong adapter? I have Boot Camp version 4.0.

If this is you home wifi try resetting the router. Turn if off at the wall wait a minute and turn it back on. Are you sure you have the right password?

My DVD player now quits whenever I attach a projector using Displayport to VGA

hHe player works fine if I disconnect the Displayport from the projector cable-- I can watch the DVD on my computer screen. But can't use a projector. MacBook Pro with Maverick. Is this an OS bug? Is there a fix? I need to be able to project my DVD's!

Hi--thanks for the suggestion to change users. When I did that the same problem happened--the DVD Player quit as soon as I attached the Displayport to the VGA connector for the Projector.
This seems to be clearly an OS problem--or at least a bug in the DVD Player.
When I use the VLC Player instead, I am able to play my DVD's without a problem thru the same projector using the Displayport VGA adapter.
Does Apple know about this bug?--it is not insignificant. I am a teacher and using the computer to play DVD's for my students using an overhead projector is part of the job. This should be a no-brainer for a Mac.
I had no problems with the DVD Player before I did the Maverick Update--it had worked fine. So this seems to be a Maverick problem, and needs to be fixed. Does anyone know if Apple is working on this....?

I can't connect MacbookPro to Infocus projector IN32IN34 (with USB). Do you have any suggestions?

I can't connect MacbookPro to Infocus projector IN32 IN34 (with USB).
Does anyone have any suggestions?
Thank you!

Which problems do you have on that website?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

[Servlet Error]-[Can't connect to X11 window server using ':0.0&#39

i m using repot engin to disply report its running in windows well in my local machine but whn i deployeed it to test server (AIX) it gave me this error server is websphere
E SRVE0026E: [Servlet Error]-[Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.]: java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:175)
     at java.lang.Class.forName1(Native Method)
     at java.lang.Class.forName(Class.java(Compiled Code))
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:91)
     at java.awt.Font.initializeFont(Font.java:333)
     at java.awt.Font.<init>(Font.java:368)
     at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.handleFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.closeObjects(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.endElement(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.startParsing(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.ReadTemplateFromBytes(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
     at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
     at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
     at ccrmsweb.actions.PrintRpts.execute(PrintRpts.java:129)
Please tell me wht exactly i have to do, i men exactly its very urgent

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.

Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.(Font.java:298)
     at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

A Java AWT, X11 problem posted in the weblogic ejb newsgroup. I haven't been in here for long, but
that has to be a first.
If you have the DISPLAY env variable set to :0.0, you have to be at the console on a Solaris box
running the XServer. 'xdm' I think is the code that has to be running. Also, I think the format is
<hostname:0.0> or better <hostname:0> unless you are on a multi-headed workstation. Something like:
export DISPLAY=hostname:0
where hostname is the name of the host running an XServer and the .xhosts file allows access to the
XServer from the display client.
Apparently, you are not at the console?
Anyway, I don't think there is a newsgroup here that I could even recommend to cross-post this to as
it is not a WebLogic question. I think I would try the Discussion Forums at http://java.sun.com.
Bill
"D. Alvarado" wrote:
Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Font.initializeFont(Font.java:264)
at java.awt.Font.(Font.java:298)
at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY

i try to use jfreechart to create a piechart on a aix os with jdk1.3.1 and the aix system does not have a xwindow installed
and the found the following error
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:77)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java(Compiled Code))
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:72)
at java.awt.Font.initializeFont(Font.java:285)
at java.awt.Font.<init>(Font.java:319)
at org.jfree.chart.plot.PiePlot.<clinit>(PiePlot.java:230)
i got the tip of passing -Djava.awt.headless=true to vm to disable system graphic calls but after restart weblogic i still get the same error
i am wondering if this case has something to do with jdk 1.3.1, and perhaps newer versions of jdk can take the parameter and operate correctly
is that right?

is headless option supported in jdk1.3.1?No,
It was added in JDK 1.4:
http://java.sun.com/j2se/1.4.2/docs/guide/awt/AWTChanges.html#headless
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4281163
Kaj

Can't connect to X11 window server using

java.lang.InternalError: Can't connect to X11 window server using "Ip" as the value of the DISPLAY variable.
I get the above error when I try to create an instance of the JProgressBar.
I have not been able to create a workaround.
One suggestion that I had was to use the following system command.
System.setProperty("java.awt.headless","true");
That gave me a null pointer exception.
I also tried setting the compiler parameters to make this process headless, but it did not make any difference.
I am running this code in a Unix environment.
Any ideas?

Hi
Generally in Unix environment the server should accept the connections from clients. Run the xhost + command on the server to which you are trying to connect and then try your application.
Thanks
Srinivas

Can't connect to X11 window server using ':0.0'

I tried to deploy a sampel BIBean application (JSP+BIBean) to standalone OC4J( install on AIX).
When I launch the jsp from windows browser,I got the following error message.
And I export DISPLAY=IP address:0.0 and bounce the OC4J, the IP address is the machine which I launch the browser and JSP. The I can lanuch the BIBean sample application successfuly (I can see the crosstab, grap...).
But this means that only my machine's browser can access application, not others.. Is ther anything wrong with my configurations.. Please help!!!
500 Internal Server Error
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method) at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:77) at java.lang.Class.forName1(Native Method) at java.lang.Class.forName(Class.java:142) at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:72) at java.awt.Font.initializeFont(Font.java:285) at java.awt.Font.<init>(Font.java:319) at oracle.dss.dataView.managers.ViewStyle.<clinit>(ViewStyle.java:6600) at oracle.dss.thin.beans.dataView.BaseTitle.<init>(BaseTitle.java:50) at oracle.dss.thin.beans.dataView.Title.<init>(Title.java:31) at oracle.dss.thin.beans.dataView.Title.<init>(Title.java:42) at oracle.dss.thin.beans.dataView.ThinDataview.<init>(ThinDataview.java:131) at oracle.dss.thin.beans.gridView.ThinGridView.<init>(ThinGridView.java:123) at oracle.dss.thin.beans.crosstab.ThinCrosstab.<init>(ThinCrosstab.java:216) at java.lang.Class.newInstance0(Native Method) at java.lang.Class.newInstance(Class.java:262) at oracle.dss.persistence.persistencemanager.client.DefaultObjectFactory.getObjectInstance(DefaultObjectFactory.java:199) at oracle.dss.persistence.persistencemanager.client.DefaultStateHandler.recreatePersistableFromStateAgent(DefaultStateHandler.java:357) at oracle.dss.metadataManager.client.handlers.persistence.PersistenceMetadataHandler.getObjectInstance(PersistenceMetadataHandler.java:242) at oracle.dss.metadataManager.client.MetadataManager.getUserObject(MetadataManager.java:3168) at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:355) at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:539) at oracle.dss.addins.thin.common.BaseThinSession.loadView(BaseThinSession.java:110) at oracle.dss.addins.thin.common.BasePresentationHandler.createBIThinObject(BasePresentationHandler.java:806) at oracle.dss.addins.jspTags.PresentationTag.createThinObject(PresentationTag.java:102) at oracle.dss.addins.jspTags.BIBaseTag.getThinObject(BIBaseTag.java:72) at oracle.dss.addins.jspTags.PresentationTag.doStartTag(PresentationTag.java:162) at viewerJSP.jspService(_viewerJSP.java:84) [SRC:/viewerJSP.jsp:7] at com.orionserver[Oracle9iAS (9.0.3.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:512)

Hi, Kelly
Thanks for your kind response.
The X-server should work, when I export DISPLY to a remote X-server.
How about ImageServlet.. It seems that the ImageServlet has more advantages than X-server or XVBF
I tried to configure OC4J using ImageServlet follow UIX developer's guide. But I was not able to force OC4J to use ImageSevlet. But OC4J is stll try to find X-sever..
I modified the web.xml file for the sample application I deployed.
Is this a right configuration? What is the different
<servlet>^M
<servlet-name>uix</servlet-name>^M
<servlet-class>oracle.cabo.servlet.UIXServlet</servlet-class>^M
<init-param>^M
<servlet-name>uix</servlet-name>^M
<servlet-class>oracle.cabo.image.servlet.ImageServlet</servlet-class>^M

Java.lang.InternalError: Can't connect to X11 window server using ':0.0'

Hi all,
I am getting the following error while running the JSP program.
Actually we are running our applications in REMOTE LINUX SERVER (Redhat 7.0).
Installed Softwares : jdk1.3.1_02 & Resin-2.1.0
500 Servlet Exception
java.lang.InternalError: Can't connect to X11 window server using ':0.0'
as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.<init>(Font.java:298)
     at CreateImage.create(CreateImage.java:22)
     at send2trinity_jsp._jspService(/sms/send2trinity.jsp:136)
     at com.caucho.jsp.JavaPage.service(JavaPage.java:74)
     at com.caucho.jsp.Page.subservice(Page.java:485)
     at com.caucho.server.http.FilterChainPage.doFilter(FilterChainPage.java:181)
     at com.caucho.server.http.Invocation.service(Invocation.java:291)
     at com.caucho.server.http.CacheInvocation.service(CacheInvocation.java:132)
     at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:341)
     at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:271)
     at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
     at java.lang.Thread.run(Thread.java:484)
After getting this error i have logged in from local and set the DISPLAY varible as ':0.0'.
But there is no improvemnt and getting the error like,
java.lang.NoClassDefFoundError
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.<init>(Font.java:298)
     at CreateImage.create(CreateImage.java:22)
     at send2trinity_jsp._jspService(/sms/send2trinity.jsp:136)
     at com.caucho.jsp.JavaPage.service(JavaPage.java:74)
     at com.caucho.jsp.Page.subservice(Page.java:485)
     at com.caucho.server.http.FilterChainPage.doFilter(FilterChainPage.java:181)
     at com.caucho.server.http.Invocation.service(Invocation.java:291)
     at com.caucho.server.http.CacheInvocation.service(CacheInvocation.java:132)
     at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:341)
     at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:271)
     at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
     at java.lang.Thread.run(Thread.java:484)
How should i solve this problem? Have anybody faced the same problem ?
Please help.
Thanks in advance.
Bye.

Hi all,
Thanks a lot for ur reply. It worked me atlast.I have installed JDK1.4 and try to run my program.But it was creating some junk value instaed of creating picture. Actullay my programme needs some third party fonts , it was not loading after i have upgraded. But what i did is , copied the fonts file in to <Java_home>/jre/lib/fonts/ directory. Now it's working fine.
I have done another thing .I am using resin-2.1.0 to serve my JSp pages . So i have added $JAVA_ARGS="-Djava.awt.headless=true"; in wrapper.pl . If u will not add this line then iot will not work for you.
Thank u once again.
Bye.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

I can not connect to the internet while using my ipad I get a message saying Safari could not open the page because the server stopped responding need help thank you

I CAN NOT CONNECT TO THE INTERNET WHILE USING MY IPAD I KEEP GETTING A MESSAGE SAYING SAFARI COULD NOT OPEN THE PAGE BECAUSE THE SERVER STOPPED RESPONDING PLEASE HELP THANK YOU

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

Error: Can't connect to X11 window server using '172.16.1.254:0.0'

Dear all,
i am installing sap4.7 in hp-ux, after installing CI, i start DI, in 17 th step it asking to install oracle by executing RUNINSTALLER.....just i open new termenal (xshell) with orasid user i executed RUNINSTALLER but after some time it will show like this---- 172.16.1.254 is my local machine 80.0.0.151 is server
/oracle/stage/920_64/Disk1/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.8848: Done
Initializing Java Virtual Machine from ../../stage/Components/oracle.swd.jre/1.3.1.0.0a/1/DataFiles/Expanded/bin/java. Please wait...
$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using '172.16.1.254:0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:58)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:53)
     at java.awt.Window.<init>(Window.java:183)
     at java.awt.Frame.<init>(Frame.java:310)
     at java.awt.Frame.<init>(Frame.java:289)
     at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
     at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
     at oracle.sysman.oii.oiif.oiifm.OiifmMainFrame.<init>(OiifmMainFrame.java:296)
     at oracle.sysman.oii.oiic.OiicInstaller.<init>(OiicInstaller.java:231)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:599)
How to resolve this issue, what is the problem.
Regards,
satish-k

If you logon to the console with a user, only that user is permitted to "send" the display to the screen. If you do an "su - ora<sid>" that user must be enable to do so too.
- logon as root
- open a terminal windows (a new one)
- execute "xhost +"
- use another terminal window
- execute "su - ora<sid>"
- execute "setenv DISPLAY <ip>:<port>"
- then execute ./RUNINSTALLER in the SAP subdirectory of Disk1 (NOT runInstaller)
Markus

Can't connect to unc path, UNC using port 80 instead port 445

Can't connect to unc path, UNC using port 80 instead port 445,
Please advise me,
Regards,
Lior

Hi,
Can you successfully ping the UNC server? If the ping fails , it means that the UNC server is down, in this case, you should find the UNC server and check the running status.
If you can successfully ping the UNC server, the port number you specify should not be 80, because the 80 port is already used by default, So, in this case, you should ask the UNC server administrator to change to the default port number 445.
Regards
Wade Liu
TechNet Community Support

I can not connect to the app store using my iphone 5

I can not connect to the app store using my iphone 5. When I first got it I was able to-but not since???
Please help

Come on guys. Help me out. When I click on the app store icon, it'll just go to a blank screen. The only time there is anything on the screen is under the updates tab. Then it just says no updates found. I can not browse apps or search for them. It just goes to blank screen

Can't connect MBP to LCD projector using DVI-TO-VGA adapter

Similar Messages

Maybe you are looking for