Can't connect to internet after automatic update

Firefox had an automatic update this morning and ever since then I always get the page "The connection was reset". Msn messenger still works so the internet connection isn't the problem. This is on my laptop(I'm currently on my PC) and it's on Windows XP, it's firewall is ESET Smart Security. I checked Error Console and there's one that appears, "Livemark Service: feed processor received an invalid channel for http://en-us.fxfeeds.mozilla.com/en-US/firefox/headlines.xml"
== This happened ==
Every time Firefox opened
== Automatic update on June 27, 2010

nvm i just had to change connection settings to auto-proxy
the auto update must have changed the settings

Similar Messages

Can't connect to internet after software update to iBook G4

I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

I am experiencing the exact same problem with my sister's laptop. iBook G4 10.3.9 I just installed Security update 2007-008 and quicktime update. After the reboot her airport connected to the house router, but will not acquire an IP address. The other computers in the house have remained connected to the router without change. I have a another iBook G4 running on 10.4.11 with the same network settings and I have no trouble whatsoever. I re-enetered the WAP password, reorganized the network connection priorities and repaired permissions, but cannot get the computer to acquire an IP address.
Any ideas??

Can't connect to internet after software updates to ibook g4

I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

You might have better luck posting in the OS X forum. This forum is for the iPhone.

Can't connect to internet after firmware update?

well last night i did a firmware update and now i can't connect to my network at home. i have a server running dhcp. so i gave the extreme a static ip in the range. dns and router ip are set to the servers ip. this all was working fine till last night. what am i doing wrong? i can't even log onto the server from my MBP. the APE is connected directly by ethernet to the server.
thanks

HI and welcome......
On your iPad...
Tap Settings / General / Reset / Reset Network Settings.
That resets to factory default. You may be prompted for your network password.
Hope that helps...
Carolyn

Can't connect to internet after software update

I just downloaded todays (3-1-2006) security update from apple. Once I rebooted my ibook I wasn't able to connect to the internet anymore. Any ideas why?
My internet connect is still good as I am typing this on my wifes ibook just fine.
thanks

Mike,
Check my post on the "Customization" thread in reply to "Onthegomike." I experienced a similar problem with my desktop and was able to resolve it. I have not yet downloaded the Security Update to my laptop; however, I'm sure I'll have to go through hoops again once I do that. Repairing permissions before and after sometimes helps, however, I often have to go through the disconnection of my airport express before I'm up and running on the iBook.
eMac, iBook Mac OS X (10.3.9) 1 Ghz G4, 768 mb ram

Can't connect to internet after latest update

Help.... ipad won't connect to the internet despite having full signal and being connected to home broadband, i know its not the connection as both iphones and macbook work fine..... was ok till i updated the software, anyone suggest anything?

HI and welcome......
On your iPad...
Tap Settings / General / Reset / Reset Network Settings.
That resets to factory default. You may be prompted for your network password.
Hope that helps...
Carolyn

IPad Air can not connect to internet after updating to iOS8.

Safari CAN NOT OPEN ANY PAGES because the iPad is not connected to internet. I updated to iOS8 last night and have been trying to reset my ipad as well. However, the problem is still there. It even says my Apple ID incorrect. GUYS! DO NOT UPDATE YOUR iPAD TO iOS8 UNTIL FURTHER NOTICE!!!!!!!! Luckily, I did not do anything with my phone. PHEW

Other threads I've read have had people note that the following solutions have worked for them:
If you have a 5 GHz wi-fi router, turn off 5 GHz support and let it fall back to 2.4 GHz.
Change wi-fi router to auto-select channels, or manually select a different channel than what it's on now.
Disable iCloud Drive.
I'm not saying that that any of these will work, but it's something to try (one at a time).

Can't connect to Internet after sleep mode

Hi,
Most times after put my iBook in sleep mode and reopen it, I can't connect to Internet. I use a normal cable connection by ethernet, but at these times, when I check the network status, it says I don't have any cable connected. The modem apears to be OK, with the computer's light on. I plug off and plug in the cable and it doesn't change and it happens the same when I click in DHCP renew - it just doesn't give any IP adreess. I need to restart the computer to get the connection again.
Ibook G3 700 Mac OS X (10.4.7)

I am trying other solutions today.
It can not change to another wifi network without switch off the wifi.
That's mean I have switch off and re-open the wifi signal every time when it show like this capture.
I waiting for more than 5 mins and it will search another wifi network automatically but it still "No internet connect".
My MacBook Pro is no any WiFi issues.

Cant connect to internet after ios6 update

cant connect to internet after ios6 update

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I cannot connect to internet after I update system.

Hi,
I update my system a few day ago (use systemd to replace rc.d) and I cannot connect internet. I guess my router table is broken, but I cannot find any problem.
I use ping to try some IP. And I find I connect to local machine only.
Do I miss some configuration ?
[~]ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2000ms
[~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[ ~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
[ ~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
--- 172.27.13.254 ping statistics ---
41 packets transmitted, 0 received, 100% packet loss, time 40131ms

Hi,
I have 2 network interface.
The eth1 is for test only. It is connected to a 8 port LAN switch, and there are 2 NAS connected to this switch.
I use eth2 to connect to internet, for example, update system. I try to disable eth1, but it is still not work.
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
inet 10.10.12.50/24 brd 10.10.12.255 scope global eth1
inet6 fe80::2e0:81ff:fe27:3261/64 scope link
valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
inet 172.27.12.23/23 brd 172.27.13.255 scope global eth2
inet6 fe80::207:e9ff:fe01:a136/64 scope link
valid_lft forever preferred_lft forever
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:60 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
Last edited by guardkuo (2012-12-22 10:52:35)

My brand new Macbook PRO i5 can't connect to internet after sleep? It works fine after reboot.

I have a brand new Macbook PRO with the latest OS and the latest EFI. I haven't installed any 3'rd party products except Moneywell for my private finances. After a couple of days it couldn't connect to internet after sleep. I run the network diag and it says the connection is OK. Log out/in doesn't help. I have to reboot everytime it wakes up after sleep. Any clue?
br,
DAVID

I am having the exact same problem. It started with 10.7, was fixed with 10.7.1, then came back again with 10.7.2.

Can't connect to Internet after update

I've had this issue before but I was atleast able to get on iTunes & firefox. After this update my comp can't connect to the Internet period. I called my cable company & everything was working fine on their end. My modem communicates that it's linked my comp by a flashing light. In network prefrences my Ethernet says connected. I do not use a wireless router. I went to the Apple store & managed to get a connection smoothly. After I did the update was when my comp was unable to connect to the Internet, firefox, safari, iTunes NOTHING. I don't have any anti virus programs on my comp.
Help anyone?

Anyone???? This all happened after the 10.6.8 update...at the Apple store my Internet worked fine. Once I get this resolved I'm never updating again!

Can't connect to internet after updating new Firmware wrt54g Help please!

So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

I am having the exact same problem.. I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help.. It says if you can't access the web based page then to use the TFTP utility to re-flash the router’s firmware but it seems it cannot make a connection to the router.. I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router.. I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well.. So what gives? I followed the directions but the only thing I seemed to accomplish was to brick my router.. Does anyone have a clue on how to go about fixing this problem? Any help is appreciated..

HT4623 My iPad is not connecting to internet after software update what can i do

Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
what to do to correct this issue? Please

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

Can't connect to internet after interrupted Windows update.

I can't connect to our wireless or LAN network with my Wife's Satellite L505-S59903 running Windows 7 32 bit. I'm not sure exactly what she did, but I think she did a hard shutdown during a Windows update. Now when I try to connect I get an error message that there might be a problem with the driver for the wireless adaptor and LAN adaptor. I've tried reinstalling the both drivers with no luck. Everything else seems to work fine. She had system restore off. Any help would be great.
Rich

Hello,
Try doing a system restore on the laptop.
Click Start>Programs>Accessories>system tools>System Restore.
Choose a date where the NB was working fine.

Can't connect to internet after automatic update

Similar Messages

Maybe you are looking for