Can't connect to websites with any browser. Bookmarks do not work but bookmarks through bookmarks edit works just fine.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Similar Messages

Can't open random websites in any browser

Put some serious hours into finding a solution for this problem last night, just obsessed now.
The two websites in question are www.iphonehacks.com and www.dropbox.com
As per an older post by Linc Davis I booted into recovery mode and had no problem opening the sites in Safari.
By the way, the problem is system wide, all browsers are affected. I can also connect to the sites with my iphone 4s while on my wi-fi
I have systematically removed extensions and attempted to match the Safari preferences I saw while in recovery mode to no avail.
I have run EntreCheck and these are the results if that's helpful.
Hardware Information:
          MacBook Pro (Retina, 13-inch, Late 2012)
          MacBook Pro - model: MacBookPro10,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 7:32:33
Disk Information:
          APPLE SSD SM128E disk0 : (121.33 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    HD (disk0s2) /: 120.47 GB (25.12 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. iPhone
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.versioncueCS3.plist
Launch Agents:
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.google.keystone.agent.plist
User Login Items:
          LaunchBar
          iClipboard
          iTeleport Connect
3rd Party Preference Panes:
          Flash Player
          iClipboard
Internet Plug-ins:
          AdobePDFViewer.plugin
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Google Earth Web Plug-in.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
          VLC Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: NO
          Volumes being backed up:
                    HD: Disk size: 120.47 GB Disk used: 95.35 GB
          Destinations:
                    Ext [Local] (Last used)
                    Total size: 249.72 GB
                    Total number of backups: 1
                    Oldest backup: 2013-10-25 06:42:38 +0000
                    Last backup: 2013-10-25 06:42:38 +0000
                    Size of backup disk: Too small
                              Backup size 249.72 GB < (Disk used 95.35 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               3%          WindowServer
               2%          EtreCheck
               1%          fontd
               0%          MenuTab for Facebook
               0%          coreservicesd
               0%          iClipboard
               0%          notifyd
               0%          loginwindow
               0%          cookied
               0%          warmd
Top Processes by Memory:
          360 MB             mDNSResponder
          147 MB             softwareupdated
          123 MB             com.apple.IconServicesAgent
          106 MB             MenuTab for Facebook
          90 MB              Finder
          90 MB              Dock
          82 MB              mds_stores
          74 MB              WindowServer
          74 MB              Safari
          66 MB              LaunchBar
Virtual Memory Statistics:
          3.97 GB            Free RAM
          2.63 GB            Active RAM
          538 MB             Inactive RAM
          895 MB             Wired RAM
          551 MB             Page-ins
          0 B                Page-outs

Zebcreed
Did u resovle this issue?!?
In Safari, Yahoo.com opens when u start the brower it the Homepage. Also,YouTube opens but gives an error when try to play a video. Firefox will open the "Google" search and that it. Chrome ( just installed it 2day because i thought it was a Safari issue)will open any URL w/ google.com or apple.com in the address.
The problem started after i followed a series of steps given on a link see below:
I have had no success in running an update "Software Update can’t connect to the update server" which i have tryed on two different networks. Both are using a FritizBox Fon Wlan wireless router.
My system is a:
Model Name:          MacBook
Model Identifier:          MacBook7,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MB71.0039.B0B
SMC Version (system):          1.60f6
How to Clean Up/Speed up Your Mac
Regular MaintenanceOne-Off Maintenance
Edited by Andrew, Teresa, Raymond Madison, Charles85 and 6 others
Macs are epic. They are fast, look good, and are high quality. However, they don't like having a full hard drive. This guide will help you to free up that extra space.
Method 1 of 2: Regular Maintenance
1
Delete apps that you do not use. Drag and trash the unused apps. Manually search and remove application-related preference and support files, or try to use uninstaller tools like CleanGenius or AppZapper to uninstall applications.
To make sure that you delete any application bundles or additional, read this article on how to uninstall files on a Mac. You'll need to search Finder and look for File Name in your search criteria.
2
Empty out the trash. It may sound obvious, but clearing out the trash will help your computer run smoother. Don't use the trash as a landing dock for temporary files; only place files in your Trash if you're sure you want to delete them.
3
Use programs like XSlimmer to clean up the obsolete code from apps. Maintenance programs like XSlimmer checks which code your computer needs for a given program and removes the rest.[1] This will reduce the space taken up on your disk and get your computer running faster.
4
Compress and archive your old files. Provided your files aren't already compressed, compressing them will make them dramatically smaller, freeing up extra space on your hard drive. In order to find out how to compress files on a Mac, click here.
Once your files are compressed, move them to an external hard drive to on a CD for storage. Keeping files you don't regularly use on your computer will slow it down.
5
Clean up system logs and temporary files periodically. Your system should automatically run UNIX maintenance scripts, but some earlier versions of Mac OSX only run these scripts between 3 and 5 AM, during which time most computers are either asleep or shut off, depriving your system of regular maintenance.[2]
Download a free app like OnyX to do scheduled maintenance and clean up system logs and temporary files.
If you want to clean up system logs and temporary files manually,
Access terminal by navigating to Applications → Utilities → Terminal
In Terminal, type in "sudo periodic daily weekly monthly" and hit Enter
Type in your Mac admin password
Wait for your system to run the maintenance, after which you'll be returned to Terminal
6
Remove iOS backups that are old and no longer up to date. An iPod, iPhone, or iPad will automatically run a backup on specific files when you plug the device into your computer. Trashing older, obsolete backups will help free up space on your computer.
To access the backups, navigate to Home → Library → Application Support → MobileSync → Backup folder. Locate the newer backups and the older backups. Delete the older backups.
7
Periodically check your ~/Movies/, ~/Music/, and ~/Downloads/ folders. Drag unneeded files to the Trash. Apps like to save here, and this can result in used space, so be vigilant about what gets put in here.
8
Delete any unused or old DMGs, iPhone software bundles (IPSW), and similar files. These files are often unnecessary and take up valuable space on your device. Get rid of them if you no longer need them.
Deleting DMGs: DMG files are disk images. Cnce you've mounted your disk image and installed your app, you're free to eject and trash your DMG. To eject, simply drag the mounted volume to the trash.
Deleting IPSW: Navigate to Library → iTunes → iPhone Software Updates and locate any unused bundles.

OS X 10.6.7 corrupted images uploaded to websites with any browser

Since upgrading to 10.6.7 i have problems uploading images to any website. they end up having only part of their color information. (http://imgur.com/XjojB)
I have tried every browser, multiple web sites, etc, and all are the same. maybe 20% of images upload fine the rest are variations on the above.
I have no problem using iPhoto to email or post pics to flickr though, only when using a browser to upload myself do i have problems. This happens on JPGs, PNGs, and GIFs.
i do not have problems with any other file types.
any ideas?

Your MBP is an exception to the rule that Clinton mentions. Late 2011 MBPs can have Snow Leopard installed but you have to follow this process.
Purchase a retail copy of a Snow Leopard disk and an external HDD.
Borrow a Mac that CAN run Snow Leopard OS (all MBPs early 2011 or earlier for example).
Install Snow Leopard OS on the external HDD.
Update the Snow Leopard OS to 10.6.8 via 'Software Update'.
That version then can be cloned onto your late 2011 MBP from the external HDD.
I have done this with my late 2011 17" MBP.
Ciao.

After 10.9.4 update can't access certain websites from any browser

I just updated to 10.9.4 Saturday evening the 26th.   Sunday morning I noticed that I was unable to get to some websites but they worked from the ipad and other devices in the house so I rebooted thinking something odd was going on post update.   It happened again a few times until I realized a pattern. I can not get to facebook, mail.google.com, google.com or most SSL only websites. Sites that redirect you to an SSL URL just sit there until they eventually time out. I can go to cnn.com but I can't load apple.com
if I try to go to bing.com which surprisingly doesn't force you to SSL it loads every time.   This is reproducible in SafarI, Firefox, and Chrome consistently. Rebooting no longer resolves the issue and I couldn't even come here to post this from the iMac because the discussion website eventually forces you to use SSL. (Actually, while posting this that URL eventually appeared after a very long wait. Other websites eventually time out entirely. Safari fails to load Facebook at all)
EtreCheck version: 1.9.12 (48)
Report generated July 28, 2014 at 12:31:05 AM EDT
Hardware Information:
iMac (27-inch, Late 2012) (Verified)
iMac - model: iMac13,2
1 3.4 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
iMac 2560 x 1440
DELL 2208WFP 1680 x 1050 @ 60 Hz
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 1:9:53
Disk Information:
APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 999.35 GB
Recovery HD (disk1s3) <not mounted>: 650 MB
APPLE SSD SM128E disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 120.99 GB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
Hitachi HDS723020BLA642 disk2 : (4 TB)
disk2s1 (disk2s1) <not mounted>: 66 KB
G-RAID (disk2s3) /Volumes/G-RAID: 4 TB (1.38 TB free)
USB Information:
Seagate Backup+ Desk 3 TB
EFI (disk5s1) <not mounted>: 314.6 MB
disk5s2 (disk5s2) <not mounted>: 3 TB
Boot OS X (disk5s3) <not mounted>: 134.2 MB
Seagate Backup+ Desk 3 TB
EFI (disk4s1) <not mounted>: 314.6 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
SCM USB3.0 CF SD
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
LaCie eSata Hub
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded]at.obdev.nke.LittleSnitch (3883 - SDK 10.8) Support
[not loaded]com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
Startup Items:
ciscod: Path: /System/Library/StartupItems/ciscod
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
ProTec6b: Path: /Library/StartupItems/ProTec6b
Launch Daemons:
[loaded]com.adobe.fpsaud.plist Support
[loaded]com.bombich.ccc.plist Support
[running]com.cisco.anyconnect.vpnagentd.plist Support
[loaded]com.google.keystone.daemon.plist Support
[loaded]com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[not loaded]com.adobe.AAM.Updater-1.0.plist Support
[running]com.adobe.AdobeCreativeCloud.plist Support
[running]com.brother.LOGINserver.plist Support
[running]com.canon.MFManager.plist Support
[loaded]com.cisco.anyconnect.gui.plist Support
[loaded]com.citrix.AuthManager_Mac.plist Support
[running]com.citrix.ReceiverHelper.plist Support
[running]com.citrix.ServiceRecords.plist Support
[loaded]com.google.keystone.agent.plist Support
User Launch Agents:
[loaded]com.adobe.AAM.Updater-1.0.plist Support
[loaded]com.adobe.ARM.[...].plist Support
User Login Items:
iTunesHelper
Arq Agent
VLCStreamer
Dropbox
ImageTransferUtility
WirelessCameraService
AdobeResourceSynchronizer
Internet Plug-ins:
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.6 Support
AdobePDFViewer: Version: 10.1.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
CitrixICAClientPlugIn: Version: 11.7.2 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes:
Citrix ShareFile Sync Support
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
fuse-ext2 Support
Printopia Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
G-RAID: Disk size: 4 Disk used: 2
Destinations:
Seagate Backup Plus RAID [Local] (Last used)
Total size: 5
Total number of backups: 62
Oldest backup: 2014-01-20 04:06:23 +0000
Last backup: 2014-07-28 03:53:23 +0000
Size of backup disk: Too small
Backup size 5 < (Disk used 2 X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
     2%Google Chrome
     2%WindowServer
     1%fontd
     0%firefox
     0%hidd
Top Processes by Memory:
279 MBFinder
275 MBfirefox
221 MBcom.apple.ShareKitHelper
188 MBWindowServer
180 MBcom.apple.IconServicesAgent
Virtual Memory Information:
3.43 GBFree RAM
3.24 GBActive RAM
376 MBInactive RAM
975 MBWired RAM
922 MBPage-ins
0 BPage-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Can't open one website on any browser on mac

I have a MacBook Pro running Yosemite 10.10 (up to date)
I also have Safari 8.0.2 and Chrome 40.0.2214.91 (64-bit).
I have been trying to open a website (home insurance) for months now and assumed the website was just down every time I checked.
Yesterday I had my wifi on my mobile (iPhone 5) switched off and the site loaded which led me to believe the issue is with my wifi and not the website itself.
I have cleared all my website data, deleted my safari cache.db folder, I've turned off and on the mac firewall as well as the one in my routers admin panel.
I don't see any proxy settings.
I'm not sure what else to try?
I get the same problem on Safari and Chrome.
Safari says it can't establish a secure connection and Chrome says the connection was interrupted Error code: ERR_CONNECTION_RESET
Does anyone have any ideas as to what might cause this?

From the menu bar, select
 ▹ System Preferences... ▹ Network ▹ Advanced... ▹ DNS
Under DNS Servers you should have one or more numerical addresses, such as “192.168.1.1” or “10.0.0.1”. What are those addresses?

I can't stream video/audio with any browser

I use firefox and Safari. I tried to listen to 923freefm.com and other streaming radio sites, and i havn't been able to find a browser that will stream.
I'm having this problem with Safari, Firefox, Netscape etc. I just bought a Mac, i havn't had this problem with my old PC.
Can anyone help?

Yes i have it, but i bought a Mac with an intel processer. Flip4Mac doesn't support my computer just yet, i think i'm totally out of luck until that point.
You can force Safari to run in PowerPC emulation mode which will probably allow you to use Flip4Mac in the meantime. To do this, select the Safari application icon in the Applications folder and press command+i to see the program properties. In there should be an option to run in 'Rosetta' mode, check that and then quit and restart Safari.

Updated to firefox 4, and suddenly can't connect with any browser though I am connected. Error message reads "could not read chrome manifest file."

i updated firefox and now I can't access the net on any browser. Wireless router everything is connected and up and running. Just not the browsers. uninstalled it, reinstalled it (didn't work), unistalled it again and internet explorer won't work either (not at anypoint after intial update was run. read several peoples simalr problems with the "could not read chrome manifest file" issue and solutions to no avail. uninstall and system restore did not work either. What did it change on my system, and how can I change it back?

Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

Can't connect to any webpages with any browser

Our Powerbook G4 can not connect to any webpages with any browser (safari, firefox, IE) but other TCP/IP applications work fine. IE, the AOL application can connect via TCP/IP, iChat and skype both work fine.
Any idea?
Thanks,
Alan

It sounds to me like either a DNS server issue, or your Mac is looking for a web proxy and not finding it.
If you don't have the DNS server filled out in your network settings, find out the DNS IP info from an ISP and try inputting it.
Also, click on the Proxies tab in Network Settings to see if you have a proxy configuration listed (either automatic config or manually inputted proxies per port). If you do, disable the proxies and try again. If not, see if you can get the web proxy info for where you are from either your ISP or your work place.

I am unable to connect to websites using Firefox. I can connect to websites with Internet Explorer. Please advsie.

I am unable to connect to websites using Firefox. I can connect to websites with Internet Explorer.
Please advise.
Thank you.

see http://kb.mozillazine.org/Firewalls

TS1398 Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password, so I enter the password there.
Chances are pretty good that the problem is the network configuration of your PC and not the AirPort Extreme Base Station (AEBS). What configuration options you choose will depend on how you set up the AEBS's wireless network, but the following can be used as a guideline:
o Connection Type: Infrastructure
o Wireless Security Type:
AirPort Setting = PC Setting
o WEP = WEP
o WPA Personal = WPA-PSK w/TKIP
o WPA2 Personal = WPA-PSK w/AES

Specific Content Will Not Load With Any Browser

This is something I have never run into and can't solve...
I have a D-Link DPR-1260 wireless multi-function print server. My machines are a MacBook Pro with 10.5.1, an iBook G4 with 10.5, a Mac Mini with 10.4.11, and a Mac Mini with 10.4.10.
Connecting to the printer via LPD is a non-issue and works fine with all the machines.
The strange problem occurs when accessing the web based services of the DPR-1260. Scanning, even using Windows, is not supported by the MFP software (Epson) but is done via the browser. Also network settings, etc.
The good (normal): Using a machine running 10.4.11 or 10.4.10 all the web content loads and works fine using any Safari, FireFox, Camino, or Opera. Even using the beloved IE 5.2.3 everything works but the Scan page. Ditto for Win XP SP2 using IE 7 or FireFox and running under Parallels or booting directly in on the MBP.
The bad (weird): On either the MBP running 10.5.1 or iBook running 10.5 only the "simple" pages will load using ANY browser. I don't normally do all caps for emphasis, but I have never seen an issue like this. I cannot access the Scan, Advanced (settings), or Setup (more settings) pages. Even the simple login page only works on occasion.
This certainly appears to be related to OS X 10.5 but I cannot figure out how.
For reference, I have tried every conceivable combination of browser, wired vs. wireless connection to the unit, disabled firewall, disabled LittleSnitch, watched traffic using tcpdump, and looked for odd ports on the print server using nmap.
Given that them problem occurs using WebKit browsers and browsers not using WebKit, and that it works properly using 10.4.* with any browser, I assuming this is some sort of system level problem.
I can provide even more details, but this post is getting too long. If you think you can help and have any questions please ask.
Please, any help is much appreciated!

Yes.
As I see it, it's clearly not a JS implementation issue as not all these browsers handle JavaScript identically (although as a web developer I wish they did). Obviously Safari and Shiira, the two WebKit based browsers, handle it the same, Opera, FireFox, Camino, iCab, and IE 5.2.3 have different implementations.

I'm having difficulties viewing some content of certain websites using any browser on Maverick!!

Hey,
I can't view some content of certain websites on any browser. I'm running on 10.9.2 and I have tried this on Chrome, Firefox, Opera and Safari and nothing seem to work. For instance, I can't view the videos on 11secondclub.com or login to digitaltutors.com
Any thoughts what the problem might be?
Thanks!

XML parsing error may have to do with a corrupt cache or profile.
*[http://mzl.la/1xKrH3y]
Please make sure that this does not happen in a new profile to make sure that this is not the issue: [[Use the Profile Manager to create and remove Firefox profiles]]

Java(TM) Platform SE binary doesn't work on any website, on any browser

I'm on Windows 7 Ultimate 32bit, everything's working fine, I always keep my system clean, I also keep the registry as clean as possible, I have a problem from at least a couple of months, so "Java(TM) Platform SE binary" doesn't work on any website, on any browser, it always crash, I tried everything, I mean EVERYTHING! I've uninstalled and re-installed java a thousand of times, completely uninstalled, removed all files, all registry entries, nothing seems to work..I always get the same message..
here's the error signature:
Firma problema:
Nome evento problema: BEX
Nome applicazione: java.exe
Versione applicazione: 7.0.400.43
Timestamp applicazione: 521c3bf2
Nome modulo con errori: ntdll.dll
Versione modulo con errori: 6.1.7600.16385
Timestamp modulo con errori: 4a5bdadb
Offset eccezione: 0001d78d
Codice eccezione: c0000409
Dati eccezione: 00000000
Versione SO: 6.1.7600.2.0.0.256.1
ID impostazioni locali: 1040
Informazioni aggiuntive 1: a091
Ulteriori informazioni 2: a0912fac5db1285ab245a51982c0da6c
Ulteriori informazioni 3: 0ef4
Ulteriori informazioni 4: 0ef461fa84dd27e3340858dc9ed3bcb3
and here's a video (made by me) of the problem: Java(TM) Platform SE binary stopped working - YouTube
can anyone help me find a solution?
Thanks

Looks like you have conflict with your java home and you are running 2 different JREs. Keep the latest and try launching EM console again and post the exception if you get any.
Thanks,
Vijay

I downloaded version 3.6.12 and now Firefox can't connect to websites

I had version 3.6.9 installed, then I downloaded version 3.6.12 and now Firefox can't connect to websites. It says "Unable to connect." I followed all the instructions on the help page about checking my firewall and removing then re-adding Firefox to the list of safe programs, but it still won't work. Is there any way I can re-download version 3.6.9? Or does anyone know what else I can try?

I found my problem. I had an expired version of Norton Internet Security that didn't uninstall properly, but I was able to remove it with the Norton Removal Tool and now Firefox works.

I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?

I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?
Thank you.

The Holy Mecha of Wifi
Turn router off then on Try turning your wireless router off then back on.
Change or turn off wireless security You may want to try toggling the settings on your wireless router, switching from WPA to WEP or vice versa, or, as a last resort, turning wireless security off altogether. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
Reset network settings on iPad. On your iPad, open Settings, then navigate to “General” in the left-hand pane. Scroll down and tap Reset, then select “Reset Network Settings.” This will delete any stored WiFi passwords and other information, but may result in a more stable connection.
Adjust brightness upward. Oddly, a number of users have found that they can resolve this issue by simply adjusting the iPad’s brightness level upward and off the lowest setting. To do this, tap Settings, then select “Brightness & Wallpaper” from the left-hand pane. Slide the brightness bar upward, then wait 1-2 minutes and check for an improvement in signal strength. Speculation holds that a power delivery issue associated with the screen brightness affects Wi-Fi.
Change thresholds in router settings. Access your routers configuration screen (for most routers, open a browser and enter the address 192.168.1.1), then change the fragmentation threshold and the CTS/RTS threshold as described here. Some users have found success with the settings Fragmentation= 2048, RTS = 512.
Change 802.11 spec on router. Try changing your router’s wireless spec mode from B, G and N to G only or vice versa. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
Switch routers. Although a far-from-ideal solution, some users have found success with switching to a different wireless router.
Turn off “Ask to Join Networks.” To do so, tap Settings on your iPad, then select “Wi-Fi” from the left-hand pane. Slide “Ask to Join Networks” to off. Speculation holds that leaving this option on causes the iPad to constantly seek networks, resulting in some type of interference with the network to which it is connected.
Forget network then rejoin. Tap Settings on your iPad, then select Wi-Fi from the left-hand pane. Choose the network with which you are experiencing difficulty, then select “Forget this network.” Go back to the previous screen and rejoin the network.
Turn off Bluetooth. Some users report that, perhaps due to interference issues, turning off Bluetooth can boost Wi-Fi signal strength. To do so, tap Settings then tap General in the left-hand pane. Tap Bluetooth in the right-hand pane, then slide to off.

Can't connect to websites with any browser. Bookmarks do not work but bookmarks through bookmarks edit works just fine.

Similar Messages

Maybe you are looking for