Can't control location of graphics when printing to 11x17.

I have a brand new HP 7500A and I have a problem printing from PDFs and DWGs.  For PDFs, the graphics never fit on the page.  I choose 11x17 as the sheet size, select Shrink to Fit (the original size is 24x36), select Print Borderless, etc. and the graphics are pushed to the top and to the right and off the page.  The graphics are there, just not scaling to fit.  It's almost like the printer thinks a larger paper is being used.  The on-screen preview looks great but it is not what comes out of the printer.
DWGs are similar but not as bad.  I can locate the graphics scaled to fit and centered on the page but I really want to push them to the right side so I can have additional space on the left for binding.  Any pushing to the right and the graphics start disappearing.  I've downloaded an updated driver for the 7500 and also tried the 7000 driver, too, but neither solve the problem.  The 7000 driver prints VERY slow too.
The big problem is I can't seem to control to my satisfaction what the printer does.  I've used HP printers for more years than I can count and I've never had this much frustration. 

What DVI adaptor?
You are outputting what is visible on your screen...what is being fed TO your COMPUTER monitor. This is not a very good way to do it to say the least.
The reason the output from your companies system is much better is that it is being output properly, via the capture card. Now, if you send the signal out via firewire thru a camera or deck or Digital Video converter (firewire to S-VHS) then you wouldn't see this.
Hmm...the matrox MXO is a DVI adaptor...how does it not do this I wonder?
Shane

Similar Messages

  • How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

    How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

    Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
    iPhoto is not the program to be doing that in and I don't think it even has that option.
    So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image.

  • Can we control order of cycling when use same access key in multiple locations

    Hi,
    I'm using Jdev 11.1.1.6, IE 9, Firefox 24.0.
    I have created simple jspx page having two buttons, named Add and Close. Close button has got access key as C. When click on Add button I'm calling a <af:popup> and that popup contains two buttons Submit and Cancel. Cancel button has got access key as C. Basically in one jspx file I have got two button using same access key. At runtime those buttons will display one in page and one in popup. 
    In IE: it works fine. When I do access key on popup it will close down the popup.
    In Firefox: it will first focus to the button on the page. When I access the same key for the second time it will set the focus to button on popup and will not execute the action.
    If I'm using different letters it will perform the action in firefox and IE both. In my requirement I need to use the same letter.
    I read in oracle documentation "If the same accessKey appears in multiple locations in the same page of output, the rendering user agent will cycle among the elements accessed by the similar keys.". So it seems to be an expected behaviour.
    My question is: Can we control the order of cycling. i.e. If we do access key on popup, can we first focus on the button in popup instead of button on the page in firefox.?
    Greatly appreciate your ideas.
    Thanks.

    Hi,
    unfortunately yes, the cycling behavior is up to the browser.
    Frank

  • Acrobat 10.1.5 extra graphics when printing to pdf

         When printing from MS Project to Acrobat, I get extra lines(thin blue/purple, see attached image) on the last half of the document. It looks fine in my coworkers, she is running Acrobat 9 though. Any thoughts?

    Starting with the image itself, what kind is it? Where is it located, locally or on a network? How is it inserted in the FM file, i.e.  by reference or as an OLE object?
    Is this a single file or a book with multiple chapters? If it's multiple chapters, does the graphic behave correctly when PDFing the individual chapter? Are there other images of the same type and location that do print correctly?
    Can you confirm whether either or both systems have had the MS hotfix 952909 applied:
    > here are two links for the hotfix:
    >
    > http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
    >
    > http://support.microsoft.com/kb/952909/en-us

  • Can Reader XI cause program conflict when printing from MS Word?

    Hi There
    I have this machine:
    Intel Core i5-3470 CPU @ 3.20GHz, 8,0GB RAM, Intel HD Graphics
    MS Windows 7 Home Premium 64-bit SP1
    I am using Office 2007, Win2PDF Pro 7, Adobe Reader XI.  My Anti Virus is Kaspersky Internet Security 2014.  I have the latest service pack for Win2PDF Pro 7.
    When I print from Word using Win2PDF Pro 7 I get the first document printed OK but the machine freezes when I try to print another.  This system works perfectly when printing from Project.Libre, Paint.NET, Excel, and a 148-page printout of my Reference Manager database.
    This problem occurs only when printing from Word, and has appeared since I upgraded to Reader XI.
    Can you help?
    Thanks

    Was already running latest version 11.0.10.  Tried the re-load fix; tried uninstalling and installing a new one from the web.  Problem still exists -- cannot print any document from Adobe Reader XI.  Computer freezes when the print file is being prepared at 0%.
    Jamesk71259086

  • Can I specify font size=1 when printing HTML?

    I want print my HTML report in font size = 1. I don't know how to do it?
    When using report builder, there seems no special control for printing HTML?
    Hope experts here broaden my mind
    Richard

    This is possible
    1) In Builder paper layout select the object for which you want to change the font size
    2) In menu
    Format --> Font
    You can change the font and its size
    Then generate to html/htmlcss . I have verified this
    Thanks
    The Oracle Reports Team

  • Can't change tray/paper size when printing photos

    I'm using an HP Photosmart C5200 and I want to print onto 4x6 photo paper, but I can't seem to change from the default tray with 8.5x11 paper. I've played around in the print dialogue box and File>Page Setup but to no avail.

    Not sure if this is the same problem I'm having. I have a HP C5180, and when I go to print I get all the necessary options (by dropping down the traingle as advised above), and all's great..... apart from the Source tray is always set to Main Tray instead of the Photo.
    I can change it each time I print, but it won't stay defaulted to Photo Tray even when I save or 'Save as' a new Preset. I have tried to overwrite the default ones, but no go, and also saved as a new Preset, but it still doesn't come up as the default selection next time I go in to print.
    Sounds easy enough to cope with I know, but I've set it up for a 84 year old to print from and I don't expect she'll manage to do this change every time.

  • Can I include the FILE NAME when printing from Bridge?

    I'm a commercial photographer. I shoot with my camera tethered to a Mac laptop to view images immediately as I shoot. I use Bridge to view these images.
    As I shoot, we save the file by product name, and then print proofs immediately. I need to include the File Name on these prints. Is
    there a way for me to do this directly from Bridge? If not, can you think of a way using Photoshop? Or anything else? Lightroom?

    Guessing you are using Bridge CS4 you could use the Adobe Output module for
    this. It is reachable through a seperate workspace in the top menu right
    side or the left side top menu the icon most right.
    You can create different lay outs as a PDF with this but for you it should
    be one per page and select the filename (with or without extension). Just
    explore the posibilities. For CS4 you could use the updated Output Module.
    If on CS3 you could use the contact sheet script for Photoshop that in
    Bridge can be reached by the menu Tools / Photoshop / contactsheet. This
    contactsheet script is also usable for CS4, it is on the Goodies install
    disk for PSCS4
    As I shoot, we save the file by product name, and then print proofs
    immediately. I need to include the File Name on these prints. Is
    there a way for me to do this directly from Bridge? If not, can you think of a
    way using Photoshop? Or anything else? Lightroom?

  • How can I control the windows behavior when the user hits "Windows key +d"?

    Hi,
    I have an application with 2 top-level windows. Both windows may be open at the same time. One window is a win32 window, and the other is a wpf window. When both windows are open, the wpf window should always be before the win32 window. When the user hits
    "Windows key +d" twice (show desktop and restore all windows), the windows are occasionally restored in a different order.
    How can I force the wpf window to always be before the win32 window?
    Which Windows messages/events are sent when the desktop is restored?
    Yoel

    Hi,
    I tried set the Topmost property on the Wpf window. It didn't help - for some reason, the win32 window still get in front of the Wpf window.
    I was able to get some win32 messages that change the win32 window position. I tried then to bring the Wpf window to the front (using SetActiveWindow, SetForegroundWindow, SetWindowPos) but i does not work as expected.
    Yoel
    Hi Yoelp,
    >> tried set the Topmost property on the Wpf window. It didn't help - for some reason, the win32 window still get in front of the Wpf window.
    It worked well on my side, could you please tell us more details about these two window? What have you done on the WIn32 Window? We need to know the reason
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT201335 can you control video from computer when you airplay

    I just added Appletv and connected my Computer and TV. I now see my TV but how do you control your computer from your tv or maybe you don't the remote does not do anything pertaining to the computer i see on the TV

    You control the computer the same as you would normally. The image is simply being mirrored to the Apple TV, you cannot control it from there using airplay.
    If that is what you are looking for then you need to search for a VNC client.

  • How can I shut down when printer window is locked?

    How can I proceed to shut down when printer window is locked?

    Thank you, i will try this option. Only thing is i did read another person having this problem and he did shut down his computer and now his photo library in unaccessible!!! Ugh. I do have an external back up hard drive. I sure hope that my photos are on there to reload into iPhoto!!!!
    I did try to place my mouse over the iPhoto icon @ the dock and held down the control key with no results in shutting down the application.

  • How to control what VoiceOver says when clicking a radio button in Safari?

    Hello-
    I am developing a web page that I want to work in Safari & VoiceOver. Does anyone know how I can:
    1) control what VO says when it is hovering over a radio button (ideally some alt text or title attribute)
    2) control what VO says when I click a radio button in Safari (right now, it seems to say 'Group').
    I have tried to put the radio buttons in a fieldset, tried tons of attributes in the input tag (including alt, title, desc, description), but nothing seems to change.
    Here is a URL where you can hear what I'm talking about: http://postcalc.usps.gov/
    Turn on VoiceOver (try Cmd+F5), pull up the URL and hover over the 'letter' or 'large envelope' radio buttons, then click one of them. It says 'group'. I'd like it to say 'letter option selected' or something.
    Thanks for any & all help!
    Seth
    PS: I do know about the <label> tag. I've tried surrounding my <input> tag with a label and using <label for="someID">, but it doesn't seem to help.

    Thank you for the suggestion...it does work and fires the event, but it is still not selecting the current record when I try to perform an Update or Delete.
    I had to modify your code a bit in order for it work in JDev 10...used the JUCtrlValueBindingRef instead of the FacesCtrlHierNodeBinding.
    Here is what my af:table tag looks like:
    <af:table value="#{bindings.FeesView1.collectionModel}"
    var="row" rows="#{bindings.Fees001View1.rangeSize}"
    first="#{bindings.FeesView1.rangeStart}"
    emptyText="#{bindings.FeesView1.viewable ? \'No rows yet.\' : \'Access Denied.\'}"
    selectionListener="#{backing_viewFees.tableSelectOne1_attributeChangeListener}"
    binding="#{backing_viewFees.table1}" id="table1">
    If I put back my 2 original attributes, then my Delete and Updates work.
    selectionState="#{bindings.FeesView1.collectionModel.selectedRow}"
    selectionListener="#{bindings.FeesView1.collectionModel.makeCurrent}"
    Here is my code in the backing bean:
    public void tableSelectOne1_attributeChangeListener(SelectionEvent selectionEvent) {
    JUCtrlValueBindingRef binding = (JUCtrlValueBindingRef)this.getTable1().getSelectedRowData();
    if (binding != null) {
    Row currentRow = binding.getRow();
    if (currentRow != null) {
    System.out.println(currentRow.getAttribute("CurrentRecordInd")); // this does print my selected value!!!!
    }

  • When printing graphics are greyed out with an X

    I am probably asking a stupid question here but I am not having any luck figuring it out.  I am a new user so sorry if this is a dumb question! I am trying to print from InDesign and a couple of my linked graphics will print as a grey box with an X going through it. I have tried 3 different printers. It also does the same thing when creating a PDF file. I am using CS4. The graphic that is causing issues was created by another user in CS2. Does anyone know what I have done to cause this problem and how to fix it. Thank you!

    I think I may have stumbled onto something here. First off the linked
    file causing the problem was an Illustrator file not a PDF. Sorry about
    that! The file was created in CS2 in 2008. I was going to make a copy of
    the file and open it up with CS4, save it then relink to the new file. I
    quickly found out I no longer have access to that part of our network. I
    can't even open the file or copy the file to another location. The funny
    thing is the links never showed up as being broken or having any issues
    whatsoever. I am going to pursue this with our IT group. Hopefully by
    Monday when I am back at work I can get this all resolved! Thank you for
    all your help!!

  • HT4356 When printing from the iPad how to control how many pages of the document to print?

    When printing from the iPad, how to control how. Any pages of the document to print?

    You got me curious (even though I've never used coupons.com, and I have an AirPrint printer).  So I checked out coupons.com in the iTunes Store and found the following two reviews that I think explain everything:
    Based on the above, my conclusion is coupons.com is set up to print on wireless HP printers from an iPad.  You could print to a non-AirPrint HP printer as well using an app from the iTunes Store.  But the non-AirPrint printers do offer considerably less compatibility with Apple's iPad applications than the AirPrint ones do.  For example, in the Epson case, non-AirPrint Epsons can print from Safari but not from email.

  • When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

    When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
    I store my PSD files adjacent to the original RAW file from which it was derived.
    If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
    How can I control which Photoshop will open a file I select when opening it through Bridge?.

    Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
    Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
    But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
    Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
    And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

Maybe you are looking for