Can't create user
My computer shut down for no apparent reason. When I switched it on again, it didn't recognise my password. Luckily, I had another user and could log into that. The main user folder is in the home directory too with everything intact. The user has disappeared altogether from the Accounts pane in System Prefs. I logged in as root administrator to create a user with the same name as the folder. It all went smoothly and asked if I want to use the existing folder with that name as the home folder. I clicked OK but then nothing. No new user was created. I tried it several times. I even tried with a different name. It created a folder but no user. Can anyone shed some light?
user13333117 wrote:
Dear friends,
I have a little problem while i running my Oracle BI 11g. After I install it into my computer Win7 32bit, I tried to create the Analysis , Dash Board and Reports. I have found a problem after i create my testing reports , the problem is " I can't find the User Creation in Admin Tab ". What should I do ? Do I need patch to apply for it?
or Do i need the license for it too?
I hope you can help me....
Thank,
DorangYou don't create user's in the front end. You will need to login into web logic's console and create user's there. Only thing you can create in the analytic's administration page as far as security goes is catalog groups.
Refer to this link to learn how to create users and groups using WLST. ( http://middlewaremagic.com/weblogic/?p=4981 )
It would be easier to use WLST if you were to create a bulk of users, as it would be time consuming to create one by one via front end.
Please mark if helps.
Thanks,
-A.Y
Similar Messages
-
Can't create user with Delegated Administrator Console! Thank you!
I have installed JES2005Q4 (include Deirectory Server、Access Manager、Web Server、Messaging Server、Calendar Server、Instant Messaging、Communications Express and Delegated Administrator) ,
i can create domain and user with "commadmin" command, but can't create user with Delegated Administrator console.
When i checked the logs of the Web Server, found some errors:
[04/Feb/2006:11:55:25] failure (12015): for host 192.168.182.130 trying to POST /da/wizard/WizardWindow, service-j2ee reports: ApplicationDispatcher[da] WEB2649: Servlet.service() for servlet jsp threw exception
javax.servlet.ServletException
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:536)
at jsps.com_sun_web_ui._jsp._wizard._WizardWindow_jsp._jspService(_WizardWindow_jsp.java:559)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:772)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:471)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:382)
at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:340)
at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
at com.sun.web.ui.view.wizard.CCWizard.handleNextButtonRequest(CCWizard.java:730)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
at com.sun.comm.da.WizardWinServlet.service(WizardWinServlet.java:111)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at com.sun.comm.da.LoginFilter.doFilter(LoginFilter.java:128)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
----- Root Cause -----
javax.servlet.jsp.JspException
at com.sun.web.ui.taglib.wizard.CCWizardTag.getWizardPageHTML(CCWizardTag.java:1577)
at com.sun.web.ui.taglib.wizard.CCWizardTag.appendPageletBodyContentHTML(CCWizardTag.java:668)
at com.sun.web.ui.taglib.wizard.CCWizardTag.appendWizardBodyHTML(CCW
[04/Feb/2006:11:55:25] failure (12015): for host 192.168.182.130 trying to POST /da/wizard/WizardWindow, service-j2ee reports: WEB2798: [da] ServletContext.log(): [ERROR] Uncaught application exception
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [javax.servlet.jsp.JspException]
at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:380)
at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
at com.sun.web.ui.view.wizard.CCWizard.handleNextButtonRequest(CCWizard.java:730)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
at com.sun.comm.da.WizardWinServlet.service(WizardWinServlet.java:111)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at com.sun.comm.da.LoginFilter.doFilter(LoginFilter.java:128)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
Root cause:
javax.servlet.jsp.JspException
at com.sun.web.ui.taglib.wizard.CCWizardTag.getWizardPageHTML(CCWizardTag.java:1577)
at com.sun.web.ui.taglib.wizard.CCWizardTag.appendPageletBodyContentHTML(CCWizardTag.java:668)
at com.sun.web.ui.taglib.wizard.CCWizardTag.appendWizardBodyHTML(CCWizardTag.java:658)
at com.sun.web.ui.taglib.wizard.CCWizardTag.getHTMLStringInternal(CCWizardTag.java:469)
at com.sun.web.ui.taglib.common.CCTagBase.doEndTag(CCTagBase.java:114)
at jsps.com_sun_web_ui._jsp._wizard._WizardWindow_jsp._jspService(_WizardWindow_jsp.java:260)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:772)
at org.apache.catalina.co
[04/Feb/2006:11:55:26] failure (12015): for host 192.168.182.130 trying to POST /da/wizard/WizardWindow, service-j2ee reports: StandardWrapperValve[WizardWinServlet]: WEB2792: Servlet.service() for servlet WizardWinServlet threw exception
javax.servlet.ServletException: Uncaught exception
at com.iplanet.jato.ApplicationServletBase.onUncaughtException(ApplicationServletBase.java:1415)
at com.sun.comm.da.WizardWinServlet.onUncaughtException(WizardWinServlet.java:98)
at com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1164)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:639)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
at com.sun.comm.da.WizardWinServlet.service(WizardWinServlet.java:111)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at com.sun.comm.da.LoginFilter.doFilter(LoginFilter.java:128)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
----- Root Cause -----
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [javax.servlet.jsp.JspException]
at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:380)
at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
at com.sun.web.ui.view.wizard.CCWizard.handleNextButtonRequest(CCWizard.java:730)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
at com.sun.comm.da.WizardWinServlet.service(WizardWinServlet.java:111)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at com.sun.comm.da.LoginFilter.doFilter(LoginFilter.java:128)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChainNow i want to update the Delegated Administrator with the 119778-09.jar patch, but the error show:
Unable to open keystore </var/sadm/security/patchadd/trustore> for reading.
Signature invalid on signed patch <119778-09>. -
Can't create user into backend system and contents in portal.
hi expert,
I installed EP(EP,BI-JAVA) as add in installation on existing BI-ABAP system based NW04s.
I can log on portal by abap user. But unubale to create any content and user in ABAP through portal.
What must be done after setup Addin JAVA STACK??
I assign following roles to test user.
Administrators :UME Database
Authenticated Users:Built-in Group Authenticated Users Built-in Groups Adapter
Everyone
but the error message is like "An error occurred in the persistence. The original and possible not translatet message was: "BAPI_USER_CREATE1@BWBCLNT100: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group". Contact your system administrator. "
If anyone can advice me, it would be appreciated very much.
Regards
MASAKIIf this is what you mean "But unubale to create any content and user in ABAP through portal"....
creating users in portal is not possible since your UME is now linked to the ABAP in an add-in installation or a dual stack system users can only be created in the ABAP system and with the roles SAP_BC_JSF_COMMUNICATION_RO /without RO should let you create users in the ABAP stack....
you can only assign roles to users on the Portal for the ABAP users ...
heres the reason...
Combined AS for ABAP + Java installation
If you install an AS for ABAP + Java, UME is automatically set up to use the ABAP user management of the same Web AS installation. This option uses the configuration file dataSourceConfiguration_abap.xml.
AS for Java installation
If you install SAP Net Weaver AS for Java the UME is linked to the java database with users and groups in the Java system database, or if you want to subsequently connect an LDAP directory to the UME. This option uses the configuration file dataSourceConfiguration_database_only.xml -
I'm using 10.5.8, logged in as an Admin, and can't create a specific new user account. The system had this account on it previously, but the account was deleted by another Admin. I'm trying to recreate the account, but it's not working. If the home folder isn't there, OS X does create it, but doesn't add the user to the list of users. Logging out and attempting to login with the account does not work. I can create other accounts, but not recreate the one that was deleted - regardless of which Admin account I'm logged in as. Any suggestions?
Have you run the disk utility program? Press "commandshiftu" to open up the Utilities window and run the disk utility and the directory utility. Also, if you have a copy of "Disk Warrior" sitting around trying running that.
Also, check under Computername/users/deleted users, if your username shows up in that file, or on that path, please trash (back them up if you need them) said files, and empty your trash while holding down the "alt/Option" key.
It may be that parts or all of the user account are still intact, try logging in via the "Terminal" application, press "commandshiftu" to open up the Utilities window then open the program "Terminal"
Type "login USERNAME" where "USERNAME" is the name of the user account.
You will be prompted for a password, enter your password for the account.
If the password is wrong, or the username does not exist, an error message, "Login incorrect" will print on the terminal.
If you log in correctly, the username displayed will change to said username. If that happens, you need to remove the user account before recreating said account, follow instructions below to remove and recreate said account.
If you have your install disk, boot from that and change the password for "root" to something you know, write this down. Boot as normal and open the application called "Terminal"
Type "login root" then enter your root password,
first try removing the user account you are trying to create type "rmuser USERNAME" where "USERNAME" is the name of the user account you are trying to create.
Then use the "adduser" command to add the user account you want to make, type "adduser USERNAME" where "USERNAME" is the name of the user account you want to create, then type "passwd USERNAME PASSWORD" where "USERNAME" is the name of the user account you want to create and "PASSWORD" is the password you want linked to that user account. After you finish all of that, type "logout" and then quit the program.
Try to login to your new user account.
If you get any error messages please post. -
Can you create user accounts in LabWindows applications?
I need to be able to create password protected user accounts for my LabWindows application. I say there was a password control. Are there any other built-in functions in LabWindows to create and maintain user accounts for an application? Any add-ons?
CVI does not integrate native functions to tailor an application based on a user account, you must design and code this section on your own.
As an help in this matter, CVI offers a password control to permit a user to enter a password with the usual, asterisk-masked input field: where and how to store passwords and what to do with them is on your responsibility.
As an additional help, I have created a small sample project to permit hashing a text (e.g. a password): since hash does not permit to decode back the original text, you can safely store the hashed text without special precautions (OK, we're not designing a banking application, aren't we? ); to check a password entered by the user you only need to hash the password and compare the hash with the original, saved one: if they're the same, then you can permit the user to log in. Despite it's quite old (developed in CVI7), that sample still works correctly in newer IDEs: I have tested it in 2012SP1 without problems.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Can't Create User after migration
I recently upgraded a PPC xserver running leopard to a new Power Mac running lion server. Everything seemd to go smoothly but after a more thorough look I am having issues. The main one being I cannot create users in the I go into the server.app and the + is greyed out. The only way I have been successful in adding users is through system preferences.
I am also having a trouble with my web server it appears as though even though the service is running I can't get any pages to load via a web browser.
Last issue I know of at this moment is I am una able to start the VPN service. Everyitme I click on the toggle it turns on then goes back to off.
Instead of doing a clean installation I migrated aftert reading that it would be my best bet.
Can anyone hlep me that may have had this or a simlar problem?The prof_attr file contains the comment:
Can perform most non-security administrative tasks
for System Admin.
In addition I don't see a corresponding entry in exec_attr and without that then you aren't going to be using that role to run any commands. You can try it in SMC to see if it works there but its doubtful.
You'll probably need to create a separate role and add the user to that role.
A grep of exec_attr shows that User_Management is probably what you're after.
alan -
[SOLVED] KDE 4.6 can't create user-places.xbel file
Lately I have been having an issue when I log in to KDE 4.6 for the first time on a user account. A window pops up with the following error:
"Unable to save bookmarks in /home/troy/.local/share//user-places.xbel. Reported error was: Insufficient permissions in target directory.. This error message will only be shown once. The cause of the error needs to be fixed as quickly as possible, which is most likely a full hard drive."
The drive has over 14GB of free space so the suggestion of a full drive seems unlikely.
The permissions of the directories are:
~/.local 700 (drwx------)
~/.local/share 700 (drwx------)
I am listed as the owner of the directories so it would seem that I have appropriate permissions.
When KDE finishes its startup, I can verify that user-places.xbel does not exist. However, when I log off, the files does get created and all seems well. I have discovered that if I create ~/.local/share (with the same permissions) before logging on, then the file gets created and the error never pops up.
So, does anyone have any idea why I would be getting this error and how I could make it stop?
thanks
Last edited by caskale13c (2011-02-04 23:18:06)JokerBoy wrote:You don't have to change anything. It's something normal.. If you are using bluedevil for example, he's trying to modify user-places.xbel but it gives you that error 'cause the file or folder isn't created already..
Perfect, I figured it must be something like that. My next test will be without bluedevil to see if the error goes away. Thanks for the assist. -
Can not create user "OPS$domainname\SAPSERVICEC11" in oracle
Hi all,
I'm installing SAP R3E 4.7 extension set 2 SR1 on Window 2003 , orcle 9.2 (patch 9.2.0.8.0) after finish CI, DB, DI and try to strat SAP with MMC but disp+work.exe didn't run . And the error is "ORA-01017: Invalid username/password; logon denied"
After that i find out solution from SAP Note400241. I need to create user "OPS$domainname\SAPSERVICEC11" but my domain name is 17 charecters long. That make the username is too long (more than 30 characters). So I cann't create this user.
How can i solve this problem?
BR,
Prachya> Hi Eric,
>
> With the note: 400421 I am facing the following
> problems..... Could you please help me out as where I
> am going wrong?
>
> 1. I could connect through " connect /@sid"
<b>-> OK, then the "OPS$" exists</b>
>
> 2. select granted_role from dba_role_privs where
> grantee='ops$_user';
> No Rows found..
>
> 3. select owner from dba_tables where
> table_name=T000
>
> gives me SAPDEV
>
> That means the owner is SAPDEV and what is SAPUSER
> ????
<b>NO, this is telling you that the schema name is SAPDEV, only. We will need it later</b>
>
> general checks:
>
> select owner from dba_tables where table_name=SAPUSER
>
> gives me OPS$DEVADM and OPS$SANDBOX\DEVADM
<b>The name of your server is SANDBOX, but you mentioned before that you had a domain longer than 17 characters. This does not match.
Have you performed a DOMAIN or a LOCAL installation?
For this output it seems that it is local</b>
>
> so if t000 has SAPDEV then should I check the above
> command for SAPDEV instead of SAPUSER???? ..
<b>NO. The table name is SAPUSER</b>
>
> 3. select owner, table_owner, table_name from
> dba_synonyms wghere synonym_name=SAPUSER
> give
> OPS$SANDBOX\SAPSERVICEDEV OPS$SANDBOX\DEVADM SAPUSER
>
> why here SAPUSER is present..
<b>
Do you know what is a synonym? or what have you queried?
Select owner, table_owner, table_name from
dba_synonyms wghere synonym_name=SAPUSER
It is giving you the
-> Synonym OWNER -> OPS$SANDBOX\SAPSERVICEDEV
-> Table OWNER -> OPS$SANDBOX\DEVADM
-> TABLE NAME -> SAPUSER
This data is correct.</b>
>
> Do I need to change the T000 table( update it to
> SAPUSER)???
<b>NOOOOO. Leave teh "normal" tables alone</b>
>
> I you know that have copied the data files (OS level)
> from anpther DEV server to sandbox..( SID same). It
> had in DBA_USER with its hostname like
>
> OPS$HPSERVER\SAPSERVICEDEV
> OPS$HPSERVER\DEVADM
>
> So I thought it must be bcos of this so I run the
> script oradbusr.sql to create
> OPS$SANDBOX\DEVADM user and managed to create it.
> Also managed to get OPS$SANDBOX\SAPSERVICEDEV users.
> The grant to them is also okay.. But then also not
> able to connect through SAP.
>
> Please suggest where I am going wrong and what to
> change...
>
> Regards
> Prashant
<b>So, Looking at the initial error ( ora-1017 ) and the output of the queries I wonder if you have changed the DB password.
I do think so. and I think you did it at DB level ( alter user identified by ... )
Then the problem seems to be that you do not have the password in SAPUSER table in sync with the password you changed.
In SAP ABAP systems you cannot change the password at DB level. You have to use BRCONNECT to do so, it will keep the passwords in SYNC:
brconnect -u system/<password> -f chpass -o <sapowner> -p
<password>
try it. then execute R3TRANS -x and see if it can connect
</b> -
Can not create user in Times Ten 7
Hi All,
I have installed Oracle Times Ten 7.0.4 in my machine. To connect to the databse I have used "connect RunDataCS_tt70_32;" which I found from the ODBC. (I even dont know whether this the correct way to connect or not). Now I have tried to create a user (" create user prashant identified by 'p1'; ") but the command failed saying "15007: Access control not enabled".
Can anybody tell me how can I create a user in Times Ten.
Thanks,
PrashantTo be able to create users and have access control applied you must install TimesTen with Access Control enabled (it is an optional feature). When you did your install you replied no (or took the default) to the question 'Do you want to enable Access Control?' (or you did not tick the relevant check box if you are using Windows).
You can enable Access Control for your installation by running the command
ttmodinstall -enableAccessControl
you need to do this as the instance administrator user (the O/S user who installed the TimesTen instance).
I would strongly advise that you read through the TimesTen QuickStart Guide and other tutorial on the TimesTen OTN site beofre trying to use TimesTen as it will save you a lot of time and many questions to this forum :-)
Chris -
Can't create user with 9iAS(1.0.2.1)
I did a fresh installation of 9ias(1.0.2.1) on a 8.1.7 EE database. Everything works fine until I need to create a Portal user. When I click "Create New users", I got a error window "Error: (WWC-00000)". If I click the "Back" icon on the top of the window, I got the same error window.
Has anyone else has created a new portal user with 9ias(1.0.2.1)?
Thanks for your help!
YoungI AM FACING THE SAME ERROR.
THE PROBLEM IS NOT JUST IN THE "CREATE USERS", I THINK THERE IS SOME SORT OF PROBLEM WITH THE "LOGIN SERVER", BECAUSE IF CONNECT TO " http://hostname/pls/portal30_sso, AFTER I INPUT THE LOGIN INFO I GET THE SAME "WWC-00000" ERROR.
WORKING WITH THE PORTAL ITSELF IS OK. ONLY THE FUNCTIONS RELATED TO THE LOGIN SERVER DO NOT WORK.
THIS IS A NEW INSTALLATION (8.1.7 SE + iAS 1.0.2.1 SE UNDER Windows2000).
ANY HELP WILL BE GREATLY APPRECIATED!!
REGARDS -
Can't created user on installed portal
After install portal i recieve error WC_000 when try to create user by portal30 login. Does anybody know how to repare this problem ?
Yes, Apache is case sensitive and the configuration files have the wrong case.
Have a look on metalink.oracle.com as there are various articles on this. -
Can I create User profile service sync connection for my site without Active directory?
Hi everyone,
Is it possible to use my site without active directory? our AD policy don't allow farm account to have "Replicating directory changes", If I export AD information to SQL and sync profile from SQL is it possible?
Thanks
TanaponPYes, you can use mysites without setting up user profile sync. But you won't be able to sync information from SQL without having a primary sync setup with AD first. Syncing to something like SQL is designed to augment existing profiles. It
won't create new ones.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Can i create user-defined fields that are checkboxes?
I need to create a set of user defined fields on Activities that are a checkboxes. I cant see any options in the manage user fields dialog to set the field as a checkbox, the only options are alphanumeric, Datetime, Units & Totals etc.
Can user defined fields be added that appear as checkboxes? if so, how do i do it?What you need will not be available by UDF. You need SDK programming for any Check Boxes. However, you may use predefined list for UDF to imitate part of functions of the check box.
Thanks,
Gordon -
Can I create user accounts in the Ipad?
I share my Ipad with multiple people and want to keep my emails and docs private.
Thanks.No, the iPad is basically a single user device, and it can only have one set of apps and content on it. Some apps may allow you to protect their content (but most don't), and for Mail there is this work-around.
-
Can not create user with useradd
Hi,
the command is (as root):
# /usr/sbin/useradd -c 'Oracle software owner' -d /u01/oracle -g dba -G ocgroup,ocmaint -m -u 1000 -s /usr/bin/ksh oracle
The output is:
UX: /usr/sbin/useradd: ERROR: Inconsistent password files. See pwconv(1M).
ACTIONS TAKEN:
# pwconv : no changes
bash-3.00# wc -l /etc/passwd /etc/shadow
18 /etc/passwd
18 /etc/shadow
36 total
bash-3.00# cat -ve /etc/passwd
root:x:0:0:Super-User:/:/sbin/sh$
daemon:x:1:1::/:$
bin:x:2:2::/usr/bin:$
sys:x:3:3::/:$
adm:x:4:4:Admin:/var/adm:$
lp:x:71:8:Line Printer Admin:/usr/spool/lp:$
uucp:x:5:5:uucp Admin:/usr/lib/uucp:$
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico$
smmsp:x:25:25:SendMail Message Submission Program:/:$
listen:x:37:4:Network Admin:/usr/net/nls:$
gdm:x:50:50:GDM Reserved UID:/:$
webservd:x:80:80:WebServer Reserved UID:/:$
postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh$
svctag:x:95:12:Service Tag UID:/:$
nobody:x:60001:60001:NFS Anonymous Access User:/:$
noaccess:x:60002:60002:No Access User:/:$
nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/:$
ocadmin:x:1001:107:ON-Center Administrator Account:/export/home/ocadmin:/bin/ksh$
cat -ve /etc/shadow
root:VipMkPKbgRZFs:14859::::::$
daemon:x:14858::::::$
bin:x:14858::::::$
sys:x:14858::::::$
adm:x:14858::::::$
lp:x:14858::::::$
uucp:x:14858::::::$
nuucp:x:14858::::::$
smmsp:x:14858::::::$
listen:x:14858::::::$
gdm:x:14858::::::$
webservd:x:14858::::::$
postgres:x:14858::::::$
svctag:x:14858::::::$
nobody:x:14858::::::$
noaccess:x:14858::::::$
nobody4:x:14858::::::$
ocadmin:Ru2SfqpBfDlSM:14858::::::$
PLATFORM DESCRIPTION
SunOS argenlab 5.10 Generic_139555-08 sun4v sparc SUNW,SPARC-Enterprise-T2000I fixed the problem. Somehow the connection and provider properties are defined in machine.config. I did not have anything in my application's web.config. After I moved provider information to my web.config and gave the appliaiton name I was able to create a user account. I do not know at what point the OraAspNetConString properties were added to machine.config.
Thanks
Maybe you are looking for
-
Lot not show in MMBE quality insspection
Dear expert i make planing for halb material against 04 origin and also active inspection 04 or lot will be generated against 101 movement type. Now lot will be show on QA32 but not shown in MMBE in Quality inspection its quantity show only unrestri
-
I run the database in archivelog mode. I take online back-ups and occasional full backups. I take a full cold backup on day1 and on day 5 i take a hot backup including the control file. After this i create a couple of tablespaces, and usual work but
-
Can I manipulate 3d object (.max, .3ds) in a Flash/AIR video game?
I have written Actionscript since AS1 back in the late nineties up through AS3 a couple of years ago, but I have not been doing any flash since CS4 came out. I want to create a video game that makes use of some 3d objects and am wondering a couple o
-
Hello i have a customer who is extended to 2 sales area 1000/10 Domestic & 1000/30 Deemed Export. If i am selling to the custoemr in 1000/10 he should be charged VAT 5 % and if i am selling in 1000/30 he should be charged CST 0 % Tax conditions are
-
how to write ddl statements in function. give me with example how to to dml statements in function.give me sample code. i am calling one function in sql experession. that function constainf the dml statemsts. how to write that function.