Can't Drag and Drop with a Double Tap using Single Finger in Lion?

I installed the Mac OS X Lion two days. But I can't drag and drop with a Double tap using Single Finger, which I used to do in Snow Leopard.
If I choose Three Finger Move, then Swap Between Pages goes back to "Scroll left or right with Two Fingers" that only works with Safari, but doesn't work with Chrome or Firefox.
I tried literally every setting in Trackpad and also checked if there was a override settings and there is no overrride setting.
Would be thankful, if you guys could suggest me what to do?
======================================
My Machine Configuration:
Macbook Pro 13" (mid 2010)
Intel Core 2 Duo 2.4GHz
4GB Ram
Nvidia Geforce 320m
Mac OS X Lion (Installe on a updated Snow Leopard 10.6.8)

Hey Serge many thanks for telling me how to do. now its working like previously
I just cheked the Dragging under Trackpad option and unchecked Three Finger Moves. now I can drag and drop with a double tap using single finger.
Thank you guys. You are the best

Similar Messages

  • Can't drag and drop images onto PS icon using Snow Leopard

    In general this is minor but frustrating.  You can't drag an image from a document onto the PS 11.0.1 icon anymore to open the image in Photoshop.

    I just read another from another website - http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
    that if you choose delete the prefernce files .plist/.cs and use "SAVE AS" vs "SAVE" the files I referred to above get saved when attempting to open th project again. I tried it and it seems to work for me now. I hope this helps others with the GB *"File Not Found"* dilemma in Leopard and Garageband V5.1
    Message was edited by: Mikeatcaz

  • Can't drag and drop nor copy  and past with iMac with OS 10.8.1.

    Can't drag and drop nor copy and past with iMac with OS 10.8.1.  Not with iTunes, MS Word, nor Pages.  No where.  Reboot or relogging in helps for about an hour.  Hard reset worked for a short time. Per Apple support, most likely will reinstall the operation system.  Just wondered if anybody else has run into this.  Did a disk scan, and that was fine.  And did rebooting, holding down CMD+OPT+R, and P..  Deleted all the start up programs.  Checked the internet, no solutions there.  So it all appears to be OS redo time. 

    Do you subscribe to MLB.tv, and if so, did you install the NextDef plug in? If so, read this…
    https://discussions.apple.com/message/19185556#19185556
    I removed the NextDef plug in over 24 hours ago, restarted and haven't had a single issue with drag and drop or cut and paste since.

  • How do I import music using homeshare with iTunes 11...I can see the shared libraries but I can't drag and drop and there is no import button.  Thanks!

    How do I import music using homeshare with iTunes 11...I can see the shared libraries but I can't drag and drop and there is no import button.  Thanks!

    Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
    If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
    Then, drag the address panel up to wherever you want it.
    You may also want to add it to the New Message window in the same way.

  • I can't drag and drop or add to library for dvd's that I converted with Bootstrap VideoWizard All-in-one app.  hep!

    i purchased Bootstrap VideoWizard all-in-one edition and converted my homemade Dvds, but I can't drag and drop the converted files into iTunes or use iTunes file - add to library to add them to iTunes so I can sync them onto my iPad 1.  What am I doing wrong?  The bootstrap website wasn't any help.

    Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
    If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
    Then, drag the address panel up to wherever you want it.
    You may also want to add it to the New Message window in the same way.

  • HT203128 I can't drag and drop music from iTunes 12 to iOS 8 iPhone 5s. How do I move music now?

    I connect the iPhone to itunes. that works. Everything shows up fine, but I can't drag and drop music from the 'music' section of iTunes 12 on my new mbp or my iMac. I used to be able to. Also, when I slide to delete songs on the iPhone, they still appear as 'ghosts' in the list on iTunes when the phone is connected - if I double click them, a exclamation mark in a circle comes up on the left of the track and it doesn't play. Can anyone help? Kind of need to get this sorted - it's bloody frustrating. I've restarted iPhone, iMac, MBP, downloaded the latest versions of iOS, OS X 10.10.3.

    you iphone does not work like a regular ipod, where you can drag and drop music, you must sync it with itunes. plug it into your computer, click on the icon that is labeled iphone. when you do this there is a section on the top that says music. click on that, then you can select playlists and artists, etc. then click apply. it should work then

  • Can't drag and drop music to iphone5

    I updated to the latest Itunes, plugged my new Iphone5 in and "restore from previous Iphone back up"  It did it fine, then i went to manage music manually and  checked the boxes for all the artists I wanted on my new phone. Sync it to my phone and all seemed ok.  Prior to this I downloaded 250 songs off the cloud so I had some music while I updated my computer so I could run Itunes for Iphone5.  When I sync everything it doubled up the 250 songs that were on there.  then some worked and some just skipped over and went to the next song.  I want to delete the doubles off my phone and re-enstall the music which i can't do from Itunes and when i do it from my phone its gone on the phone but still on the "on this phone" in itunes.  I can't drag and drop any music onto my phone and when i go to "music" on my phone from itunes it says i have to erase all content and sync with this computer.  this is the only computer and only account it has ever seen.

    Tried that, I can get almost all my music except one album (the album I want).  I deleted it off my phone by swiping then hitting delete.  It does not show up on my phone but it does say that it is on my phone when i plug into itunes.  I can't drag and drop it, I checked the box for that album and it didn't transfer.  No idea what to do.  How can I even just use Itunes to delete music off my phone?  Used to be able to highlight and then right click and then delete, not anymore. 

  • Can't drag and drop or import movie clips or ver. 8 projects into iMovie 9

    Hello:
    I just installed Leopard (OS X) with iLife and iWork (although I didn't actually install iWork). I can't drag and drop .mov or .dv files into a project. If I "File-->Import-->Movies", all the types I want to import (.mov & .dv) are grayed-out. I created and saved a project with the older version of iMovie (8) and then tried to import it into iMovie 9. The result is a message in the clips panel that says "No matching video. Choose a different options from the Show pop-up menu at the lower left corner." So far, everything I wanted to do is bust. Can somebody help?
    Thanks.
    Etude.

    annadex wrote:
    I have tuns of .mp4 clips, converted them to .mov clips... .
    How?
    easy way:
    • double-click mp4 to open it in QuicktimePlayer.app
    (does it play the video?)
    • File/Export/choose 720p (if optional, if not 480p)
    • import THAT into iMovie using iMovies import routine, proceed …

  • Can`t drag and drop images into PSE5

    hi,
    i`m from germany, so sorry for my english..
    i use pse5 since a few years and a few month with windows7..today i had to reinstall it and now i can`t drag and drop images from explorer or acdsee to PSE workspace. i get no error-message , only this circle with a diagonal line..
    i CAN drag and drop images from the editor..
    - i reinstalled it and repaired it
    - tried diffferent compatability modes
    - i don`t run the program as a administrator ( tried it- it was the same)
    so can anyone please help me?
    thank you so much!
    mareen

    Try making a direct shortcut to the Organizer and then the Editor.
    You should then be able to drag and drop on to the desktop icon.
    On Windows right click on the desktop and select New >> Shortcut
    Browse to Computer OS C:
    And find the PSE Organizer application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
    Inside the Adobe >> Photoshop Elements Organizer (yellow folder) you are looking for an application file “PhotoshopEementsOrganizer” with six small icons (e.g. representing thumbnails - could be different in PSE5 but look for the exe file)
    Select it and click OK
    Click next
    Rename by taking out Photoshop Elements leaving just the word Organizer
    Then click finish
    You should now be able to launch directly form the desktop by double clicking on the icon.
    You can set up a similar direct link to the Editor application.
     

  • I can't drag and drop iTunes music files into Roxio Jam 6 anymore and, now I have to import music one song at a time by using the " " or "-" buttons on the bottom. What is going on? G5 Dual 2 Ghz and OS 10.4.11

    Hi. I have not used Roxio Jam for quite a long time and I just wanted to make a few CDs. Jam used to work easily and well. I have a problem. I can't drag and drop iTunes music files anymore and, now I have to import music one song at a time by using the "+" or "-" buttons on the bottom. What is going on? I trashed the preferences file and restarted Jam to no avail. I also have selected that Jam should open files with iTunes in the Jam preferences. I have a G5 DP 2Ghz PPC  machine with OS 10.4.11, iTunes 9.2.1 and Quicktime's version is 7.6.4. I have 2 GB of RAM and the machine has dual 1.25 Ghz. processors plus a 500 GB HD. Can anybody give me any suggestions?
    Thanks in advance,
    Larry

    I found an solution.
    Uninstalling AirParrot as well as the two offending AirParrotDriver.kext and APExtFramebuffer.kext files in System>Library>Extensions was the fix. All problems disappeared.

  • Can't drag and drop or copy multiple photos from iPhoto 9.4.2

    I am trying to export multiple edited (not originals) photo files from iPhoto to finder (actually to place in my Dropbox folder to share with friends/family). This used to be (in previous versions of iPhoto?) an easy case of dragging and dropping a selection of photos, or even a whole event, to the desired location in Finder. However, this no longer seems to work. It seems like it will as when you select and drag the photos, the 'green plus' symbol appears and remains when I move to drop the selection into finder, but then nothing happens. The photos dont transfer.  
    I can still drag and drop a SINGLE photo effectively and it saves in the edited form. I also tried selecting the desired photos, chosing copy and then paste in the desired location in finder. But when I chose 'paste' (right click, paste; or edit, paste) in the desired location, it only pastes a limited selection of the photos which I chose to copy. Not all the photos copy across.
    I cant understand why this is no longer possible as it used to be one of the classic examples of intuitive file actions that I love Apple for. The only way I can find now is to chose to export the selection or event (file, export) but this is much less easy and requires various decisions about the file quality etc. Using this option with various compression options, I have not been able to replicated the "original" file size which is displayed under 'info' for each photo in iPhoto.
    Any ideas please?
    Tom

    Thanks LarryHN thats helpful. I've just tried that and the export 'current' option does indeed re-create the edited photo file with exactly the same file size at that shown in iPhoto. I did consider the 'current' option but was put off by the loss of the metadata with this option. But maybe the old drag and drop approach was the same?
    It's curious that the resulting file size from 'export, current' is different (larger in the example I just tried) in comparison to that resulting from 'export, jpeg' (with either the medium or high option selected).
    OK there seems to be a couple of reasonable options available although neither is as nice as the simple 'drag and drop' which used to be available!!! Why would they remove that option?? (and yet not for single files?).
    Thanks
    Tom

  • I can't drag and drop anything

    I was using senuti to put my songs into itunes and all the sudden it stopped working, the import button and the drag and drop feature. I thought it was a problem with senuti but now I can't drag and drop even my downloaded songs into itunes (i have to do it from the file menu) this is ok i guess but it doesn't work for senuti and i want the rest of my songs! what would make itunes stop having this function? Thanks for any advice

    I was using senuti to put my songs into itunes and all the sudden it stopped working, the import button and the drag and drop feature. I thought it was a problem with senuti but now I can't drag and drop even my downloaded songs into itunes (i have to do it from the file menu) this is ok i guess but it doesn't work for senuti and i want the rest of my songs! what would make itunes stop having this function? Thanks for any advice

  • I recently installed iTunes 4.3 and can't drag and drop music into my 'music library' anymore?

    I recently installed iTunes 4.3.5 and can't drag and drop music into my 'music library' anymore. Every time I try to drag the music from a folder into the library, that little circle with the line thru it comes up (not allowed symbol). I've been using iTunes for years and am pretty computer savvy... I have no idea what the problem is. The only way I can add music right now is if I go to File>Add File to Library and that takes way too long, especially when adding 20-30 songs. I am using Windows 7 and I have an iPhone 4. Please help! This is extremely frustrating.

    Francil3n3 wrote:
    I recently installed iTunes 4.3.5
    No, sorry... you did not.  There is no iTunes 4.3.5.
    What did you actually install?  iOS 4.3.5 on your iPhone?  If so, this has NO affect on the ability to manually manage media via iTunes.
    Let's start over... tell us exactly what has been done.

  • I can't drag and drop from a data CD I recorded

    I recently burned some audiobooks files (in mp3 format) as data cd's in Toast 8.0.1. When I go to reload them back onto my 20" 2 Ghz Dual Core Intel I can't drag and drop the files directly into any folder while using the columns view in a finder window. I can do it if I drag onto the music folder and let it spring open down to the level of the folder. I also can drag the mp3's into iTunes and then into the folder. This is not CD related since I used several diff brands.
    I constantly update, backup, repair permissions, and do other maintenance so everything is up to date. I have noticed this behavior just since I started to use the program called Audiobook Builder. I am (and have always used) a non-admin user account. When this started a few months ago it seemed to go away with a restart, permission repair, or a logout but now it seems permanant. I checked user permissions on my home folder - I have not added any software since adding Audiobook Builder. Any idea's? I read something about trashing a com.apple pref but didn't try that.
    I suspect Audiobook Builder since it changes the permissions and filetype to the iTunes Audiobook filetype but have not seen anyone reference this.
    wes

    dj_paige wrote:
    While the programming of course could be done, the idea of a function that performs on original unprocessed images seems to violate the whole idea of what Lightroom was designed to be. At least that's my opinion. Of course, the idea that Adobe should do this programming for a relatively small number of people (you're one of a very few people to ask for this, that I have read) seems to be something that isn't going to happen.
    I agree, I can't see much reason for drag-and-drop to drag the unprocessed image - in other words, an image that isn't the one that you see when you drag and drop.  I can see that just filling this forum with "why the heck does it do that????????" posts.  I could be wrong, but I suspect that Adobe won't do that. 
    But if you do want to drag-and-drop the original unprocessed image, you can do it very easily now.  Right click the image, choose "show in Explorer", and then drag-and-drop from Explorer. 

  • I can't drag and drop my songs from mp3 rocket to my iphone?

    i have my mp3 rocket account linked to my itunes account and some songs get put onto my phone, but some dont. i can't drag and drop and if i try to rename it with correct characters, nothing happens. the mp3 rocket folder is in music under shared libraries and they look like albums with a musical note in the middle. i tried unchecking and checking them again but nothing happens. i've restarted my computer. and i added those songs to "what's new" but i still cant add them to my phone...
    can someone please help?? thank you

    Select the first column before the track title.

Maybe you are looking for

  • Aging Report Problem

    Dear all SAP expert, I have a question about aging report for business partner. I want to know what is the difference between Aging Report with option "display reconciled transaction" check and Aging report with un check option "display reconciled tr

  • Error Console opens each time Firefox starts using latest stable version.

    I open Firefox, it opens and it's Error Console opens. There are a history of information messages, warnings, and errors showing. Why is this happening?

  • FCS on Macbook Pro moving to new Macbook Pro

    Hi folks, I have FCS on a Macbook Pro. I am just about to sell this machine (have reformatted the drive)and wish to install FCS onto my new laptop. Is this going to cause me any problems ? Cheers, Message was edited by: sprintman

  • How do I Label Audio Streams for Playback

    I am working on a DVD with 2 audio streams and the client would like when toggling from one stream to the next for them to be labeled on the DVD player "5.1" or "2.0". I know I have seen it on retail DVD's. Currently it just reads 1 or 2. How do I ch

  • I can't highlight FOI in a circle with mapviewer!

    Excuse me,I came with a question like this: At frist ,I added a basemap:linshi.demo_map; Then,I added a themebasefoi:linshi.cp_u_p; and then I'd like to draw a circle to highlight the foi in it. But when I had finished drawn the circle , an error app