Can't export from FCPX!! (error -1)

Hi, I'm running FCPX 10.0.8 on a late 2012 iMac and I've got to get an edit out urgently for the client but I keep getting an error every time I try to export. I can't do anything with this video if I can't export it!!! I need help urgently.
I get the following message as attached:
The share operation Master File has failed.
The operation could not be completed because an error occurred when creating frame 1328 (error -1).
It's 1440X1080 ProRes 422 original footage AVCHD.
Any help on this?! It's urgent!
Btw I've already located frame 1328 and removed the clip that starts there. Still fails. Also tried copy/pasting it into new project and rendering it all again. Still fails.
Many thaks

Hi saddact,
I, along with many others are having the same problem. I am days behind on delivery of of a master disk for a client and thanks to FCPX 10.0.8, I have not been able to.  I am currently "sharing" a masterfile and as of now it is working, I am at 73% . . .
First  duplicated file, then the below . . .
Here is what seems to be working for me (fingers crossed):
Settings in Preferences set to under Playback / background render unchecked,   under Destinations / Masterfile codec ProRes 422, . . .
Well forget that, just failed!!! "encoding frame error" one of many I have seen over the last few days!!!
I was able to export a codec set to H.264 last night, maybe I try that again. 
Well I did not try deleting preferences this last time . . . try that along with the above.
Come on, lets get the updates right BEFORE releasing them.

Similar Messages

  • Problems exporting from FCPX

    I can not export from FCPX. Get stuck on 95% and I give up after 45 min. It´s about 15 min fotage that I tried to export in Apple TV3 format.

    I've had this issue weekly with a show I produce.  It bugs me for hours.  In my case, I have to wait until the entire timeline is rendered, and then I have to export it to ProRes 422.  Any other codec requires a re-render, which provokes the problem again.  The problem starts when I take a few clips from my P2 and use the stability function along with any color correction topping them off with titles.  It seems as though part of the rendering process involves re-analyzing the entire clip during rendering, and if I don't allow it to completely render the clips, I get missing video with graphics on top.  I have a 12-core machine with 16GB RAM, and yet it still takes about two hours to render my 30 minute show after I'm done.  This doesn't include the hours it takes to analyze the P2 clips as I import them, which also hinders me during editing and causes continual crashes.  I'm hoping this new update I'm about to run addresses some of those issues.

  • Movies have stopped exporting from FCPX?? Urgent

    I have recently done the update to Mavericks and since then my movies wont export from FCPX?
    When I click export nothing happens and when try uploading striaght to youtube it come up with this.
    The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
    Anyone have any solutions got some deadlines to meet need help asap!!!
    Cheers

    http://www.apple.com/finalcutpro/specs/
    This is the page that's probably relevant to you.
    http://support.apple.com/kb/HT4664?viewlocale=en_US&locale=en_US
    The requirements have changed  a bit since the first version two and half years ago. It's also possible the software was simply copied onto the machine without being downloaded from the App Store.

  • I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you co

    I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you confirm this is intended to happen, or is it already in process. While awaiting for this essential development, can you please suggest any way of transferring information either way?

    spicer_the_coalman wrote:
    I cannot export projects from GB in my MacBook into GB on my iPad3
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbxtogbi
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    spicer_the_coalman wrote:
    nor can I export from IPad to my MacBook.
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • As with others I can't export from Lightroom 4 to Elements 10 or any of the Nik products except HDR

    As with others I can't export from Lightroom 4 to Elements 10 or any of the Nik products except HDR Efex pro. Surely this has been fixed? If not it is appalling. It has been going on for too long in a program that has supposed to have some integrity

    I am able edit pictures in PSE (Photoshop elements) 10 BUT i am unable to edit videos in PRE (premiere elements) 10. I will uninstall LR 4.1 RC1 and then install RC2 and use a backup of the catalog. Lets see if that works.

  • Can I export from Muse cc with out java script coding?

    How can I export from Muse CC with out Java Script Coding?
    I'm trying to create an custom email but email won't recognize Java Script, Only HTML.
    How do I export my tample from Muse CC using only HTML coding?
    Thanks in advance.

    Hello,
    It is not possible to selectively export only part of the code for the exported page(s). The pages that are exported, all the code for them is exported, and there's no way to export only the HTML and leave out the rest of it.
    Cheers
    Parikshit

  • What format of photos and videos can i export from my computer to my iphone/ipad?

    Hi,
    what format of photos and videos can i export from my computer to my iphone/ipad?
    Also i have a problem with Imessage from my Iphoe 4S and Ipad that some of my contacts althought they have activated Imessage from their product i cannot send them any Imessage.
    Kind regards.

    Regarding the supported formats for syncing from a computer to the iPhone, the following information is from http://support.apple.com/kb/ht4236
    On a Mac, these file formats will sync from your iPhoto library to your device:
    BMP
    GIF
    JPEG
    JPG
    JPG2000 or JP2
    PICT
    PNG
    PSD
    SGI
    TIFF
    On Windows, these file formats will sync to your device:
    BMP
    GIF
    JPEG
    JPG
    PNG
    SGI
    TIF
    TIFF

  • Export from FCPX to Compressor 4 Failed - Quick time Error:-50

    Hi all,
    Having some trouble exporting a large video (1080p, about 5 gb) after using the Share>send to compressor option.  Footage was shot with a Canon Ti3, and exported fine by itself to an .mov, but when sent to compressor I get the above error. 
    I have so far done the following:
    trashed FCPX and Compressor 4 prefs
    checked for updates
    deleted the projects render files and rerendered
    Any ideas?  Screen shot below.
    Jimmy

    There have been many reports of QT- 50 errors on export at FCPX forum.
    This may sound as though I'm changing the subject, but why not bring your exported movie into Compressor? It's always been a more reliable workflow than Send-to Compressor going back to the FCS days.
    If you are committed to the Send workflow,  try creating a new project and copy and paste from the old project to the new.
    Russ

  • USING DISCOVERER DESKTOP CAN'T EXPORT AND GET ERROR ORA-00000

    we use a win 2000 server to export discoverer reports by command-line methods.In the past ,everything is ok. But from last week , we found some reports always keep in export phase and can't export anything, also with ora-00000 error.
    there are 2 things should be mentioned:
    1. in the past , these reports can export without any error
    2. we can export the same reports normally on another server(but we don't want to change server for some reason)
    I know Oracle suggest we update to discoverer 10g, but it can't tell me why another client can export normally
    so where is the cause?
    Discoverer Desktop version - 4.1.46.08.00
    EBS version - 11.5.9

    Hi
    Presumably you have tried rebooting?
    If you have windows updates set to automatic it is possible that one of the recently applied updates has done this.
    Best wishes
    Michael

  • Can't export from keynote 09 to quicktime

    When I try to export from keynote 09 to quicktime 10 I get an error code there is not enough disk space or error 34.  I have taken off some graphic intensive files and have 30 GB of space left, but that does not seem to help.  Waht can I do?

    Until you receive a specific answer from an expert, I would suggest finding somewhere to put unnecessary (or less important) larger files.
    Macs need 10% free space to work correctly and 15% is much safer. Any less and you could run into all sorts of unpredictable problems. I think you will find that some of the free space is being used to process your exporting request, so that is multiplying the problem.

  • Can't export from Entourage

    Any attempt to export yields an error message saying that it can't continue because an email is corrupted, and that the database needs rebuilding using the database utility.
    Did that. Verified it. Still get the same prob during export.
    Any ideas?

    Every e-mail client has its strengths and weaknesses. For one attachments and HTML support varies by client, and while some newer ones support new web browser info better, plain text is still the only reliable means of sending e-mail. Your idea of doing a year at a time mitigates the risk of data loss, though if you haven't backed up from prior to the data corruption, until you clean up the e-mail you risk loss of data in the e-mail. This is another reason to keep a copy on the server. At least it is not then at the mercy of the application doing e-mail and more at the mercy of the internet provider staying stable. Really depends whom you think is more reliable.

  • MPEG IMX 625/50 export from FCPX

    Hi,
    is there a way to export to IMX 50 (MPEG IMX 625/50) from FCPX directly or by sending it to Compressor 4 ?
    FCPX manual says that it can work with IMX files but I cannot find a way to export to it. I have also looked through Compressor 4 manual and can't see this export option either. Please help.

    Hi Tom,
    maybe I am missing something here but I cannot see an 'export' menu in FCPX.
    I've looked through the entire interface with no luck. I only see that share timeline range button:
    which has really limited options to choose from.
    In the File menu I only have the Export XML... Please don't mind if this is something obvious but I am still learning the whole new interface, which by the way is simply awesome!

  • Can't export because of Error -50 but can't upgrade my final cut because of video card?

    So I updated to mavericks later to find out you can't export in final cut pro unless you upgrade the software, my problem is that when I try to upgrade the software it says "you do not have the required graphics card"
    So I'm stuck. What can I do? I Simply cannot export using any option  as I either get a compressor error -50 or nothing happens at all.
    I can't update the software. I can't export.
    APP NAP IS OFF

    If the problem is with the graphics card then here is a list of compatible cards: http://support.apple.com/kb/HT4664
    What computer are you using? If it is an older Mac Pro 1,1 to 3,1 (early 2008) then the ATI Radeon HD 5770 should work. This is the one I've used and it has 1GB of memory. The more graphics card memory available the better. I read one account where a person had to go to 2GB of memory to avoid the spinning beachball but who knows what other resources he had tied up. For myself, I have a video-only machine and the Internet is disconnected when I'm editing and the 1GB worked perfectly fine. Oh, and with only 8 GB of RAM.
    The 5770 cost $249 with free shipping about two years ago. Recommend not using a "flashed" card.
    As for what to do for the interim, one suggestion would be to copy the Project to an external drive and find someone who would be willing to finish the share process. Other than that, it looks like you'll be dead in the water until the video card issue is resolved.

  • How do I save an imovie project that I can't export from a 4th gen ipod touch?

    My daughter created a movie in imovie.  We can't get it to export.  It says that there isn't enough space left.  I have deleted everything off the touch except for imovie.  When I started there were 1.2 gb free.  For some reason it went down to 110 mb free.  I have it back up to 956 mb free.  I have no idea what is taking up all the space.  Did it partially save another copy of the movie?  I just want to save her movie for her, she's 10 and is extremely upset.  The movie is almost 45 minutes long.  I thought maybe I could cut in half and export it as 2 movies?  I have no clue what I am doing.  If you can either help me export the movie OR free up space on the ipod I would greatly appreciate it.  Thank you.

    Connect the iPod to your computer and launch iTunes. It will show up under Devices on the left part of the screen.
    Click on it in devices and a serries of tabs will appear in the next window. Under the Summary tab you can backup the device to your computer. The other tabs allow you to sync to or from the iPod to the computer or computer to iPod.
    Your goal is to remove apps and data from the iPod until you have enough room on it to finish and export the movie. Once you've shared it to iTunes you can remove it from the device to free up space and restore your data from the backup.

  • I can not export from phosotshop elements 10 and premier elements 10

    I have windows 8, my computer is new and came with photoshop and premier elements 10 installed, but I cannot export anything, I can see the option under files tag, but I cannot select it, it appears in a lighter grey.
    Thank you

    In the PSE10 Editor the Export and Automation menus are grayed out by design. They are intended for use where third party plug-ins, add-on’s or scripts are installed.
    When you have an image open in Full Edit and you have finished your adjustments, simply use:
    File >> Save As
    You can choose from a whole list of file formats.
    You can also export directly from the PSE10 Organizer (windows only) by selecting thumbnails and clicking:
    File >> Export As New Files
    In PRE10 when you have finished editing your video in the timeline, click the Share button to export. There are a variety of templates to export to a folder on your hard drive or to burn a DVD etc.

Maybe you are looking for

  • Problem with client_get_file_name

    Hi, v_filename := client_get_file_name(........); :b_test.test := v_filename; Above is the simple code that I use. But my problem is ... sometimes ( I think 1 out of 10 ), when I select the file in the dialogue and press open button, the dialogue clo

  • Rating images in different formats with Elements 9

    Hi there , I am in my first couple of weeks of using Elements 9 and have a question that hopefully someone can help me out with . I use a Nikon D300 and have the camera set up to shoot in NEF(Raw) & JPEG . On Sunday I shot over 250 images which turne

  • Blobs and refreshing the schema

    Hi all, I have two questions about Kodo 3.3.3. 1) About blobs. A blob is the serialization fof an object. Does Kodo store the hashCode of the class (ir the serialVersionUID of the class) that was used to serialize the object ? Will I have a problem i

  • Invalid xml error for raising events thro EM console

    Hi, I am using soa-suite 11g and was trying chapter 17 (EDN) from the book "Getting Started with Oracle SOA Suite 11g R1 – A Hands-On Tutorial". I created an event and trying to consume it through a mediator and writing it to a file. I read that ther

  • Creating a DLL Driver for Use in VB

    Hi, I am trying to export a dll file for use in VB.  I used the build > dll option within my project to create a dll, but when I try to add the reference to Visual Studio, it says that it is not a valid assembly or COM component and I cannot add it.