Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

I have a HP Officejet Pro 8500A.   I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded.    The paper is 5X7 when folded, 10X7 laid flat.

shgilljx,
Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.  
Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
Text template: The text will be printed on number 2.  That means your wording must be within the bottom half of the page.
Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
Print the text template. Insert side #3 into the printer. The text should print on side #2.
Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
When folded, all should be correct, if I did it right.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

  • I can only figure out how to debug on the flex side

    I am calling CFC methods from my flex applications but I can
    only figure out how to debug on the flex side. Is it possible to
    debug on the CFC methods begin called from flex? I don't think this
    is possible but you may prove me wrong :)

    Thanks.
    As a workaround I tried returning the thing that I suspect
    the problem lies:
    <cffunction name="updateField" access="remote"
    returntype="String">
    <cfargument name="field" required="true"
    type="string">
    <cfargument name="currencyName" required="true"
    type="string">
    <!--- <cfargument name="currencyID" required="true"
    type="Numeric"> --->
    <cfargument name="value" required="true"
    type="Numeric">
    <cfquery name="q" datasource="#datasource#">
    update tbale
    set <cfqueryparam value="#arguments.field#"
    cfsqltype="cf_sql_varchar"> =
    <cfqueryparam value="#arguments.value#"
    cfsqltype="cf_sql_float">
    where currencyName =
    <cfqueryparam value="#arguments.currencyName#"
    cfsqltype="cf_sql_varchar">
    </cfquery>
    <cfset flash.result="update RATES #arguments.field#" >
    <cfreturn flash.result>
    </cffunction>
    but the following line does not return the correct string:
    <cfset flash.result="update RATES #arguments.field#" >
    I do I add arguments to the string?

  • When I open Safari, I always type command-plus to enlarge the view.  However, I can't figure out how to permanently set the Safari screen to this view setting in the preferences.  Any ideas?

    When I open Safari, I always type command-plus to enlarge the view.  However, I can't figure out how to permanently set the Safari screen to this view setting in the preferences.  Any ideas?

    Sorry, but you must Command + for every page. It's not permanent.
    If you haven't tried yet, check out Zoom in Safari > Preferences > Accessibility

  • I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form".  I can't figure out how to get to the page that you choose which form you want

    I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form".  I can't figure out how to get to the page that you choose which form you want. How would I do that?

    Pct,
    In the Numbers spreadsheets window where all your documents are shown as icons, tap the Plus Sign.
    Choose Create Spreadsheet
    Select the template you want to use
    Jerry

  • How do i get the phone to ring when someone calls, it seems to only vibrate and I can't figure out how to turn on the ringer

    how do i get the phone to ring when someone calls, it seems to only vibrate and I can't figure out how to turn on the ringer

    look in settings:sounds and be sure you have a ring tone set, and both vibrate buttons are off.  Also be sure the volume slider id as far right as is comfortable.

  • I have  a iphone 5 and i can not figure out how to turn on the LED notification light. is this even possable? if not how do i know if i missed a call when i was not there to answer it visualy

    I have  a iphone 5 and i can not figure out how to turn on the LED notification light. is this even possable? if not how do i know if i missed a call when i was not there to answer it visualy

    If you were not there, how would you see the led?
    Anyway missed calls will appear on your Lock screen under the Missed tab.
    Or a small red numbered badge will appear on the Phone App icon when you have missed calls. You can then access the Recents Tab in the Phone App to see whcih calls were missed.
    Missed Calls are shown in red there

  • HT4085 I can't figure out how to turn on the rotation.  How can I do that

    I can not figure out how to turn on auto rotation.  How can I do that?

    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.

  • How can i download something and then open it to use? I can not figure out how to successfully download the new iTunes.

    I can not figure out how to download the new version of itunes and open it on my mac. Might be a simple solution i just cant get it to work.
    Thanks for your help!    
              Amber Rose

    Did it not show up in yoour Software Update (in System Preferences)?
    You can directly download 10.5.2 from Apple from here.  And if that doesn't work (it didn't when I just tried it -- something wrong with the apple itunes site I assume) download it through macupdate from here.

  • #*$!%! Can't figure out how REALLY to set the printing defaults so they STICK for everything

    PLEASE DON'T REPLY HERE.  PLEASE REPLY TO MY IDENTICAL POST AT 
    http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348
    On our 6-month old HP OfficeJet Pro 8500 Wireless A909g, we can't seem to figure out how to set the DEFAULT printing parameters so they really apply to all docs (unless we designate otherwise for a particular doc, of course).  When we set them, sometimes they work for the next doc, and sometimes they revert back to an earlier setting.
    There seem to be three ways to set parameters for the printer: Properties, Printing Preferences or Printing Defaults on the Advanced tab.  (We really thought Printing Defaults on the Advanced tab would do it, since it's so hard to find, but ... NOT.)
    My partner thinks it's an HP conspiracy to sell more ink because the reversion is to General with Color (the most ink-intensive, as far as I can figure out).  We are trying to fix the machine to start always with Fast-Economical/Black Ink Only.  Sometimes it's there and sometimes we have to re-jigger first.  We still have to check every time.
    Also, I want to fix every job to "Print Back to Front" because the printer shoots out the pages face up.  Again, sometimes it's there, and sometimes we have to re-set before the job.
    Also, whether we get the default we had set or we re-jigger first, the settings don't stick for every worksheet in an Excel workbook.  Or sometimes not even every page. 
    So, who out there has the 100% foolproof guide to NAILING DOWN THOSE SETTINGS FOR EVERYTHING?
    PLEASE DON'T REPLY HERE.  PLEASE REPLY TO MY IDENTICAL POST AT 
    http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348

    Locking this accidental double post and directing people to the linked original thread.
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • I can't figure out how to ask if the size of the arraylist is equal to sqrt

    This is what I have so far. I need to cofirm that the size of the array is equal to a square root. But I don't know enough to figure out how to do that. Maybe I shouldn't use an if?
    Help?
    Thank you
    import java.util.ArrayList;
    import java.util.Scanner;
    public class SquareTester
    private ArrayList <Integer> magic;
    * Constructor for objects of class SquareTester
    public SquareTester()
    magic = new ArrayList<Integer>();
    public static void main(String[] args)
    Square magicSquare = new Square();
    Scanner in = new Scanner(System.in);
    System.out.println("Enter value for magic square: ");
    int input = in.nextInt();
    ArrayList<Integer> magic = new ArrayList<Integer>();
    boolean continueLoop = true;
    while (continueLoop)
    magic.add(input);
    System.out.println("Enter the value 000 when you are through ");
    System.out.println("Enter next value ");
    input = in.nextInt();
    if(input == 000)
    continueLoop = false;
    double magicSize = Math.sqrt(magic.size());
    if (??)
    magicSquare = new Square();
    magicSquare.add(input);
    else
    System.out.println("Not enough values ");
    System.out.println("to make the magic square!");
    }

    if (mySqRoot == listsize) { ... }

  • I can't figure out how to buy at the app store

    There doesn't seem to be any button to press to actually buy mountain lion. I upgraded to 10.6.8 by using software upgrade on my menu. Then to get Mountain Lion I went to app store but could figure out how to actually buy it.
    I am desperate to get this resolved. I have upgraded my Office for Mac and cannot format any numbers in Excel. I am hoping that once I get my OS totally upgraded I will be able to use excel again.

    It's a large download - about 4.5GB - so it may take some time via a satellite connection. If the download is stalled, you should be able to just 'continue' the download. However, if it looks as if it's going to take some time, heading to the Apple Store might be your best bet.
    Good luck,
    Clinton

  • Changed my apple ID on computer and can't figure out how to make iPad the same

    Recently changed my ISP and changed my Apple ID and password on my computer to work with new provider.  However my Ipad is stuck with the old ID and I can't find anything about how to change it.  Any ideas of what to do or where to look?

    Sign out of old and sign in with new.
    Settings>Store>Apple ID

  • I use Firefox at work and home. I have different screens on thee two computers. I can't figure out how to make them the same even though all settings match.

    At home the address bar etc is grey but my settings are for rose. At work using the colour settings the address bar is rose. I have a different setup with icons on the two screens. At home I have the refresh icon between the search bar and address bar, at work I can't find the refresh icon. I have tried customizing and all I still can't the same screens. Both computers are running Windows XP. I believe I am running the same version of Firefox in both computers.

    At home the address bar etc is grey but my settings are for rose. At work using the colour settings the address bar is rose. I have a different setup with icons on the two screens. At home I have the refresh icon between the search bar and address bar, at work I can't find the refresh icon. I have tried customizing and all I still can't the same screens. Both computers are running Windows XP. I believe I am running the same version of Firefox in both computers.

  • When typing in the location bar i get a bunch of garbage and can't figure out how to get ONLY the history.

    just want to get a simple url when i type in the location bar, not the rest of the garbage.
    == This happened ==
    Every time Firefox opened
    == always

    Hello Carl.
    See this article:
    http://support.mozilla.com/en-US/kb/Location+bar+autocomplete
    I hope it helps. If it doesn't, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • If I open a photo in "preview", multiple photos open. I just want to open one, but can't figure out how to do it.

    I keep multiple photos in a desktop folder to be quickly accessed by using Preview. But when I try to open ONE photo, it opens multiple photos. Can't figure out how to display just the single one that I select.  OS 10.7.2

    This is the resume feature of Lion. The last state of the application is saved when quitting (i.e last pictures viewed in Preview, last videos viewed in Quicktime etc).
    You can switch it off for Preview by copy and pasting the following in to the terminal application
    defaults write com.apple.Preview NSQuitAlwaysKeepsWindows -bool false

Maybe you are looking for