Can't figure out how to set my midi controler to control the sampler!

I have a Korg Kontrol49 and I want to be able to control the sampler knobs and faders with the ones on my Korg. I have it connected threw USB. It works for the keys but I can not figure out how to program the rest of it. Any help would be great. I tried reading everything I could to get it to work but I cant. Please help!
Thanks
Mac Pro Mac OS X (10.4.8)

Press Command-L. Touch the onscreen control. Twiddle your MIDI knob. Assignment learnt.
Then go read the manual on Controller Assignments...

Similar Messages

I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten.

I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten. I need to download the product and I can't figure out where to begin.

Ask someone at your school... Do you have a Cloud redemption code, or a CS6 serial number?
If Cloud, Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html and
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
If CS6, download at Other downloads and enter your serial number when prompted
Again... your 1st resource is your school

I can't figure out how to set the history to only save 2 days. Is there a way. Thank you

I have tried to figure out how to set my history to only save 2 days. I am sure that in previous version of firefox that this option was available where as in this one I don't see that. So I am either blind that I can't find it in the history option or it doesn't exist. It seems the options are remember history no limit or always to remove when closed. I want the options of setting how many days not the other two. Is there a way to do that? Thank you.

No need to crop your clips. The mask does the cropping of the upper clip.
To use the image mask, you need an image to place into the drop zone in the inspector. In your case you'd want a simple black to white gradient as the image mask and choose Luminance in the Image Mask source luminance pop-up. I'm attaching a sample gradient. The original was 1280x720 to match a 720p movie but the forum shrinks it down. This gradient was created in Photoshop in less than 30 seconds.
You import this gradient file into your event. Click on the Mask Source in the Image Mask effect and then click on the gradient file in your event list and click Apply Clip. Change the Mask Source to Luminance. Change the offset mask parameters to move where the gradient lines up in your movie.

I can't figure out how to set a breakpoint in a SenTestingKit unit test

I'm learning Cocoa after decades of doing other languages. I'm trying to use SenTestingKit for unit tests. One of my unit tests doesn't work, and I want to set a breakpoint to figure out why. So far, I haven't figured out how to do this.
I found Chris Hanson's instructions for how to do this, but he apparently wrote them for an earlier version of Xcode, and I don't know enough to adapt them.
I am writing a tutorial document for writing a simple Cocoa App using Xcode 3.1, git, SenTestingKit, and OCMock. It's at http://xorandor.com/FirstCocoaApp. I've got it up to the point of trying to debug a unit test, and I'm stuck there.
I also couldn't figure out how to have Xcode run the unit tests while building the application. Again, Chris' instructions didn't quite do it, and I don't know enough to figure out the rest.
So, if you know how to do this, please give me some hints. I'll put those into my tutorial, so that the next people who need this can find it.
Thanks,
Pat

I figured out more of my problem, but I haven't solved it yet.
What happens is that, after I create a test case, I try to run it with a breakpoint. After I start the program, Xcode turns the breakpoint from blue (meaning active) to orange (meaning that it can't set the breakpoint).
Several people have said to turn off the Lazy symbol loading preference. I did that, and that didn't fix the problem.
I wrote up a detailed list of steps that I took at http://www.xorandor.com/DebugQuestion.txt
I also put a copy of the project file at http://xorandor.com/MyProject.tar
If anyone has any suggestions on what to try next, please let me know.
Thanks,
Pat

My 3gs screen suddenly enlarged beyond the edges of screen and I can not figure out how to set it back to normal

The font on my 3gs suddenly went oversize, does not fit the screen, and I can figure out how to reduce the size. It is almost impossible to move around let alone type.

Try double tapping with three fingers.
Them go to Settings > General > Accessibility > Zoom OFF.

Can't figure out how to set a frame width

Noob questions I suppose....our instructor has us creating a
site using only framesets. I realize this isn't the best way to go,
but we are leading our way up to CSS.
If you look at my navbar, it needs to be 125 to be able to
fit my buttons, but I can not for the life of me how to set the
width of that frame.
Also, how do I name the site on the index file from "untitled
document" to what I want. I know how to do it on individual
pages... or normal index pages, but here, it does not seem I can
pull up the index file alone without everything being loaded and no
way to edit the index file.
Edit: Forgot to provide the link:
http://www.webrevamps.com/assignment10/index2.html
And the pages should not scroll. Hopefully I did that right.
Thanks!

Your instructor should be relieved of their duties. Nobody
should be
mentioning frames nowadays except to note that they are
antique and should
only be used on special occasions, and that their use will be
left up to the
reader to determine.
> If you look at my navbar, it needs to be 125 to be able
to fit my navbar,
> but
> I can not for the life of me how to set the width of
that frame.
You set the width of a frame the way you'd expect to - in the
frameset page
definition. When you create a framed site, you first create a
frameset page
that defines the width and height of every frame in the
frameset, e.g.,
<frameset rows="80,*" cols="*" frameborder="no" border="0"
framespacing="0">
<frame src="UntitledFrame-112" name="topFrame"
scrolling="No"
noresize="noresize" id="topFrame" />
<frameset cols="80,*" frameborder="no" border="0"
framespacing="0">
<frame src="UntitledFrame-113" name="leftFrame"
scrolling="No"
noresize="noresize" id="leftFrame" />
<frame src="UntitledFrame-114" name="mm_target"
id="mm_target" />
</frameset>
</frameset>
This defines a frameset containing two rows, one of which is
split into two
columns. The top row is 80px tall, and the bottom row is
whatever is needed
to fill the browser's viewport in height. The bottom row
contains two
columns, the leftmost of which is 80px wide, and the
rightmost is whatever
is needed to fill the browser's viewport.
As mentioned, if your instructor hasn't given you this
information they are
doing a double bad job.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"motleyscrewed" <[email protected]> wrote in
message
news:[email protected]...
> Noob questions I suppose....our instructor has us
creating a site using
> only
> framesets. I realize this isn't the best way to go, but
we are leading our
> way
> up to CSS.
>
> If you look at my navbar, it needs to be 125 to be able
to fit my navbar,
> but
> I can not for the life of me how to set the width of
that frame.
>
> Also, how do I name the site on the index file from
"untitled document" to
> what I want. I know how to do it on individual pages...
or normal index
> pages,
> but here, it does not seem I can pull up the index file
alone without
> everything being loaded and no way to edit the index
file.
>
> Thanks!
>

I can not figure out how to set-up my home page so that it starts with Goggle, and then evrytime I open a new tab, it too opens with Goggle. TY 4 any help.

[email protected]

Firefox has always opened a blank new tab, if it opened to anything else that would be caused by an add-on. Check your add-ons to see if any offer this feature, or if any were disabled when you updated to Firefox 4.
The NewTabURL add-on can be used to open a page of your choice in new tabs - https://addons.mozilla.org/firefox/addon/newtaburl

Pearl: can't figure out how to set up email...

I purchased my Pearl about 2 wks ago, and haven't had any luck with email setup. I previously had a bb for work, but that was managed through a work account. I'm trying to view my local IP email via my bb, and not sure it can be done at this point. This is probably pretty basic, but it's confounding for me so far. Any help?

Follow the below procedure to integrate your mail IDs-
Click on the E-mail Settings icon. User will be prompted with BIS Terms and Condition
On click of E-mail Settings user will be prompted with BIS Terms and Conditions
User need to click Yes and also Agree on the mentioned Terms and Conditions
Upon agreeing the Terms and Conditions Email Account Setup prompt will appear. From this part user will be able to integrate his/her existing email accounts
For integrating existing email accounts type in the Email Address and Password as requested
Upon clicking the Next button you’ll receive a notification of successful integration of BlackBerry. Click OK to finish the integration
Right after successful Integration handheld will receive an email from Activation Server. This is an welcome notification for you
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Can't figure out how to change my email and password for the message board...

I did password recovery earlier and ended up with some short (insecure) temporary password. I've wasted WAY too much time looking for a place to update my username and password, but I just can't find it.
Solved!
Go to Solution.

While there is no way to change your username, you can go here to edit your email and password.
http://homesupport.cisco.com/en-us/mysupport/editprofile
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

TS1702 I downloaded the Pages app for Iphone and can't figure out how to unable to upload my documents to the program. Please help!

Please advise. I'm trying to download documents to Pages app on my iphone and can't seem to find the instructions on the help menu. Please help

There's several ways to get access to your documents.
You can email them to yourself from where ever they are presently.
You can use iTunes file sharing to copy the files into the file sharing area of Pages in iTunes.
You can turn on iCloud and go to iCloud.com on your computer to copy files into iCloud which will then copy them to your iPhone.
If you have Pages on your computer you can turn on iCloud on your computer and your iPhone and select those documents to keep synced between the two devices.

I jailbroke a phone and don't really care if it is jailbroke anymore. So i want to go to 5.1 and I can't figure out how to enable bonjour which seems to be the problem

I jailbroke a phone and no longer want it that way I would rather upgrade to 5.1 software and the problem seems to be because it disabled bonjour from i tunes . ,
How do i enable bonjour or just how do I get 5.1 software on a jailbroke phone?

Bonjour has nothing to do with this.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup to get rid of that garbage which removed all built-in secuirty included with iOS on your iPhone.
If your iPhone is not recognized by iTunes, check this link.
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591?viewlocale=en_US

I am trying to connect my new iMac to my Buffalo router. I forgot my router password, so I reset it and it is working. I can't figure out how to reset my router password and lock it on my iMac.

I am connecting my new iMac to my Buffalo router. I forgot my router password so I pushed the reset button and my computer was able to connect. The problem is, I can't figure out how to set my new password and lock the router. I went to the Buffalo website and downloaded the CD, as I can't find that either. I can't open any of it because it says it is Windows and can't open it. I am new to Apple!

kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution.

Can't figure out how to insert an html within my template

I've searched, but perhaps I am not using the correct terminology. I apologize if this has been addressed elsewhere.
We have a vendor who is trying to mimic my webpage for our customers who sign on to her service. My problem is that I don't like having versions of our webpage outside our organization because I'll have to get them to update every time I make a change to our page. I know it will be forgotten at some point. What I'd like to do is set up a page on our site and insert their html content page within my template framework. There is a form that needs to link to their site so it needs to live on their server. I tried inserting an html, but it didn't work. I know in the olden days I used to be able to do this in PageMill. Now, I just can't figure out how to do it. Does anyone know the secret?
Here is a sample page on my site showing what I'm trying to do: http://www.franklinebranch.com/TEST.html. I'm using DW CS5.
Thanks for any suggestions. Anna

That's what I was afraid of. Is IFrame a separate program?
This is the vendor page: https://secure.powerpay.biz/r/fsb.aspx

Can't figure out how to create an update form in a cfwindow tag

I finally was able to figure out how to do an add form inside
of a cfwindow tag yesterday. But I want this form to be
multipurpose, and allow edits as well. But for the life of me, I
can't figure out how to pass a row of data to the form inside a
cfwindow. Normally, I'd pass the primary key via the URL but if I
try to do that here, it basically reloads the page and closes out
the cfwindow since I have the window set to not show by default.
My page has a list of departments. My page is called
departments.cfm. For each row in the department list, there is a
link called edit. When the user clicks this link, I want the
cfwindow to open with the cfform populated with the data from the
department list for the row selected. Sounds simple enough, except
how do I pass the department_id to the form? If my link is <a
href="departments.cfm?id=#department_id#>Edit</a>, the
cfwindow tag displays and I can see the data in it, but then closes
right away. I finally figured out that it was calling the page
again and the cfwindow is closing because I have it set to not
display by default. I'm about ready to drop this cfwindow and just
do real popup windows via javascript. And I'm normally not in favor
of doing popup windows, but the application I'm working on doesn't
have enough real estate on the screen to do a hidden form, so a
separate window containing the form is my best solution.
Anyone have any suggestions?

Well, this is kind of a tough one for me, but it sounds like
the best way will be to launch a JavaScript function everytime the
user clicks the link, like this:
<cfoutput query="getDepartments">
<a href="javascript:showWin(#yourID#)">show
window</a>
<br>
</cfoutput>
the showWin function will both create the window and launch
it, passing in the user chosen var:
function showWin(id) {
var URL = 'editDeptPage.cfm?dept_id=' + id;
var winName = 'deptWin' + id;
ColdFusion.Window.create(winName, 'Edit the Department',
URL,
{x:100,y:100,height:300,width:400,modal:false,closable:true,
draggable:true,resizable:true,center:true,initshow:true,
minheight:200,minwidth:200 })
The following line of code is supposedly to make sure that
the window refreshes each time it is launched, by naming it
something new each time:
var winName = 'deptWin' + id;
However, if it doesn't work, I think there's a Window refresh
function in the Ext library but I'm not sure.
Also, in the showWin function, after the Window is created,
you might need this but I'm not sure:
ColdFusion.Window.show(winName)
Talk to you later,
Peter

I already have chrome as my default browser on my nook hd +, and I want to change it to firefox, but I can't figure out how

I have deleted my browser app, and now I can't figure out how to set it so that when I press the web button, it will automatically use firefox instead if chrome

You can go to '''Tools''' >> '''Options''' >> '''Advanced''' >> '''General''' the last option if you check it, always that you start Firefox, it will check if it is the default browser :
*[https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default?esab=a&s=set+firefox+as+default&r=3&as=s How to make web links open in Firefox by default]

Can't figure out how to set my midi controler to control the sampler!

Similar Messages

Maybe you are looking for