Can't find home drive after reinstallation of O.S.X

Dear friends,
I have one ibook G4 and a Macbook Pro. Two days ago, the ibook G4 failed to start up, I tried in safe mode then pass through. Then I run Onyx-automation followed by restart, after that neither my desktop nor the sidebar of the finder window show the home drive icons,( I partitioned the internal hard disk into two drives). But when I run Disk utility and found both are there correctly, including the files and capacity, usage etc. it tested both drives "appears OK". Yesterday, I tried to reinstall O.S.X Tiger 10.4 without removing previous system via a firewire to my Macbook Pro which installed with Leopard( the disc drive of my ibookG4 corrupted last year).
finally, the hard drives are still invisible, I did tick the display options for hard disks from the preference panel of Finder. To the worse, the same problem happened to my Macbook Pro after I restarted it.
It seems a simply software issue, physically the hard disks are ok through the disk verify and permission verify.
Headache! Please advise ASAP.
thank you,
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 6:58 PM in response to: cjunxing
Reply Email
what happens when you enter commandshiftc in finder? that should show all the drives. if it doesn't, maybe the drive has acquired the hidden flag. run the following command in terminal
sudo chflags 0 /
you'll have to enter your admin password which you won't see as you type it. that's normal. see if the drive shows up.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 7:11 PM in response to: V.K.
Reply Email
dear V.K.
When I enter commandshiftc in finder, it only shows up "network", then I followed to input sudo chflags 0 / in terminal and password, but the drives still not show up.
is there any other options to try out?
many many thanks
Junxing
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:01 PM in response to: cjunxing
Reply Email
run the following command in terminal and post the results. this will list permissions flags and acls on the startup drive.
ls -ladeO /
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:03 PM in response to: V.K.
Reply Email
I run the command as follows.
Last login: Tue Nov 3 11:04:49 on ttys000
cjunxing:~ junxingchen$ ls -ladeO /
drwxrwxr-t 38 root admin - 1360 Aug 11 10:25 /
cjunxing:~ junxingchen$
pls advise
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:34 PM in response to: cjunxing
Reply Email
these permissions look fine. sorry, i don't know what the problem is or why the drive would not show in finder. does it happen on all accounts? make a new one and check from there.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 1:11 AM in response to: V.K.
Reply Email
hi, V.K.
after running the two commands, suddenly, The Macintosh HD icon showed up at both desktop and sidebar in finder, but the other drive (I partition into two parts) still not showing. Then I open Onyx and tick the "unhidden those hidden files", I found that drive. So I conclude it was hidden by sth. But I don't know how to unhidden it, the icon always in grey.
Can you please instruct again.
thank you.
Junxing
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 6:41 AM in response to: cjunxing
Reply Email
aha, so it was a hidden flag after all. then run
sudo chflags 0 /volumes/*
you may need to restart after that to make the second drive show up.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 5:33 PM in response to: V.K.
Reply Email
Dear V.K,
I run the command at my Macbook Pro, my second drive show up. So exceited! However, when I tried with my ibook G4, neither drives come out, is there any difference in the commands between Tiger and leopard. just now, I check the hidden files with Onyx, both drives are there.
Pls guide me.
thanks
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 6:46 PM in response to: cjunxing
Reply Email
sorry, I haven't dealt with Tiger in such a long time I don't remember if it respects chflags. ask on Tiger forums.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz

I don't have a source attribute for this (maybe I wrote it myself!):
There are visibility toggling instructions at [this web site|http://www.pinkmutant.com/articles/invisible.html] using Terminal or Applescript.
If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.

Similar Messages

Time Machine can't find external drive after installing Lion

Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

Does the drive work when just directly connected? If so, have you prepped the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

IMac 2007 freezes after sleep and then can't find hard drive after reboot.

I'm having a problem where my mid 2007 iMac (2.4 GHz core duo w/ 6 Gb of ram) freezes after sleep. It seems to happen only when an application was open at the time of sleep. The freeze manifests as the cursor turns into the spinning wheel, but the computer can't do anything. Command-option escape doesn't work. Most of the time after I reboot, the iMac can't find the hard drive. If I leave the computer off for 15 minutes then it will reboot ok. Is my hard drive going out or do I have another problem? I'm running Mountain Lion 10.8.5. I've repaired permissions, verified the hard drive and reset the NVram but I still have the problem.

Here is the console right before the time of the crash.
11/10/13 10:02:13.069 AM SyncServer[18050]: [0x7fe02140bde0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
11/10/13 10:02:13.912 AM com.apple.time[177]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
11/10/13 10:02:16.947 AM iCalExternalSync[18051]: [ICalExternalSync ]Encountered exception: *** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205] withStack: (
          0   iCalExternalSync                    0x000000010186ca60 iCalExternalSync + 125536
          1   iCalExternalSync                    0x000000010185bac9 iCalExternalSync + 56009
          2   iCalExternalSync                    0x000000010186b694 iCalExternalSync + 120468
          3   libdyld.dylib                       0x00007fff8abf17e1 start + 0
          4   ???                                 0x0000000000000005 0x0 + 5
11/10/13 10:02:16.948 AM iCalExternalSync[18051]: [ICalExternalSync ]NSException name:NSRangeException reason:*** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205]
11/10/13 10:02:16.959 AM SyncServer[18050]: [0x7fe02140bde0] |Server|Warning| lost connection 0x7fe021496b30 to com.apple.iCal
11/10/13 10:02:31.511 AM com.apple.time[177]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
11/10/13 10:02:32.786 AM iCalExternalSync[18053]: [ICalExternalSync ]Encountered exception: *** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205] withStack: (
          0   iCalExternalSync                    0x000000010618ba60 iCalExternalSync + 125536
          1   iCalExternalSync                    0x000000010617aac9 iCalExternalSync + 56009
          2   iCalExternalSync                    0x000000010618a694 iCalExternalSync + 120468
          3   libdyld.dylib                       0x00007fff8abf17e1 start + 0
          4   ???                                 0x0000000000000007 0x0 + 7
11/10/13 10:02:32.787 AM iCalExternalSync[18053]: [ICalExternalSync ]NSException name:NSRangeException reason:*** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205]
11/10/13 10:02:32.797 AM SyncServer[18050]: [0x7fe02140bde0] |Server|Warning| lost connection 0x7fe021434b60 to com.apple.iCal
11/10/13 10:04:21.138 AM com.apple.usbmuxd[29]: _SendAttachNotification Device f0:d1:a9:1b:e1:0b@fe80::f2d1:a9ff:fe1b:e10b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
11/10/13 10:04:46.805 AM iTunes[15640]: Entered:_AMMuxedDeviceDisconnected, mux-device:48
11/10/13 10:04:46.805 AM iTunes[15640]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:48
11/10/13 10:04:46.806 AM iTunes[15640]: tid:16dcb - Mux ID not found in mapping dictionary
11/10/13 10:04:46.806 AM iTunes[15640]: tid:16dcb - Can't handle disconnect with invalid ecid
11/10/13 10:11:17.664 AM com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7f8ac9627660> Sun Nov 10 10:47:04 2013 PST (approx)
11/10/13 10:11:17.664 AM com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7f8ac9627660> Sun Nov 10 10:47:04 2013 PST (approx)

Can't find home network after 2.4 update

As the title says, after updating to 2.4 my apple tv cannot see my wireless network. It can see just about every other network in my street. If I restore to 1.0 it connects fine, upgrade to 2.4, no sign of my network. I tried this 3 times now just to make sure it is not a fluke.
Has anyone else had this problem?
I am using a Belkin F5D8631 nothing has changed on this set up, I have 3 macs, 2 phones and a wireless printer all connected to it with no problems.
Any suggestions?

This may not be your problem, but:
Channel 12 and 13 are not used in all countries, it might be that your tv is defaulting to US settings after the update, it might be the case that the tv no longer works on these channels.

MBP Retina can't find USB3 drives after sleep

When waking the MBP-R from sleep, I get a message saying the externally powered USB3 HD was improperly ejected. But the REAL problem is that I cannot then get the MBP-R to see the external HD without rebooting. If I turn off power to the HD and disconnect it from the USB3 port, and then reconnect it to the USB3 port and turn the power back on again, the MBP-R still will not recognize it. Nothing works unless I do a system reboot.
I've done 3 system updates since I received the machine. Each one was said to address USB3 issues but they've missed this one. Anyone know of a fix for this?

I have all the same issues. Not enjoying the new update and hoping for a software solution soon. Restarting every piece of equipment and changing cables to direct hard wiring doesn't help on my setup, so... Hoping for the best. In fact, mine all say they can't connect to the internet even though every other device in our household is connected, either wirelessly or via hard wire, without issue.
I can't stream audio or video. It's awesome. But, I'm sure Apple will fix it. It's definitely a software bug to have so many people working fine and then WHAM...
There appear to be many others with the same issue on here.

VISTA - can;t find device driver for your IPOD - read the solution here!

It would appear that VISTA is rather stupid when it comes to the Ipod - it can't find the driver for itself. Do the normal autmatic way of trying to find the driver (that doesn't find the device) then look in the hardware device list (control panel) you should see you Ipod listed under other devices with a yellow triangle next to it. Right click this line and select "properties". then click "update device driver". Then, DON'T do the automatic find, instead click "I will choose the device from a list". Click on "storage device" and voila! VISTA now finds a USB mass storage device and installs it - JOB DONE! HOORAY!
good luck!
Mark.
Ipod 5G video colour Other OS WINDOWS VISTA ULTIMATE

When you are prompted to look for a driver input
C:\WINDOWS\System32 and browse it will find a generic
volume that fixes it.
I tried this as well. I can find a Generic Volume (I think it lists SD, MMC- neither of which seem correct), but neither of those helps. iPod still isn't recognized as a drive even in disc mode. I started another thread after not finding this one. I'm not sure why USB Mass Storage device isn't one of the options.

T400 Windows 7 64bit Can't Find Printer Driver

Hi all,
Perhaps someone can help with this puzzling problem. Just bought the T400 w/Win 7 64 bit from the Lenovo website. It is great except one thing.
I have a Win2k T22 ThinkPad on the network with a parallel port HP laserjet 6L and a USB port HP DeskJet 970cxi. When I go to add a printer on the T400, Win7 searches the network and finds the printers. For the 6L it downloaded a driver and it works fine. For the 970cxi it tries to find a driver from MS website but can not find a driver.
When I connect the970cxi printer directly to a USB port on the Win7 T400 it finds a driver and it works fine. But not over the network? Even after it found a driver when it was connected locally?
On the network is a Debian Linux computer that can print to both printers. I turned on printer sharing on it. The T400 can find the printers on the Linux box and can print to both the 6L and 970cxi.
I loaded VirtualBox on the T400 and then install Ubuntu Linux. The Ubunu Linux can find the printers and can print to both.
Does anyone know what the heck is going on here? Why can't the T400 find a driver for the 970cxi printer but when it's connected directly it finds the printer driver and works?
Is this a Win7 64 bit issue?
No driver available?
Communication problem w/printer?
Buy a new printer and throw out a perfectly good printer?
Thanks,
Rich
Solved!
Go to Solution.

I did as you suggested but now get a different error: 0x00000214
I googled this and found others with the same problem. Tried the solution and it worked!
Here's the link:
Network Printer Problem Link
In case the link gets broken I cut and pasted it here:
1. Click Start, click Control Panel and double click Devices and Printers.
2. Click Add a Printer.
3. Select "Add a local printer".
4. Select "Create a new port". Choose "Local Port" as the type of the port.
5. In the box "Enter a port name", type the address as the following format.
\\Network address of the host computer\[The Share Name of the printer
Then click Next.
6. Choose the correct driver in the driver list. If no available driver, click the button Windows Update, wait for the process finishes and then look for the driver again.
7. Finish the installation.
Thanks! Your suggection got me to an error I could identify. And a solution. I hope others find this helpful.
Rich

I can't find a driver for HP Officejet Pro L7580.

Updated my system to Windows 7 after years of using Vista. Now I can't use my HP Officejet Pro L7580 because it can't find a driver to install. Every tab says that the device is working perfectly. I have removed all HP software...turned it off everything...rebooted...reloaded and still the message says that driver is missing and can't find it on the HP website. It also said that it doesn't have permission to update drivers. When checking that area....thats' wrong. Updates are always automatic without permission per that tab you open to change settings. I can't see the problem/solution anymore...can anyone else?
This question was solved.
View Solution.

Hey there,
First make sure whether you are utilizing Windows 7 32bit or 64 bit then follow this link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=2512008&
Whether you choose the basic driver or full featured software these are the official HP drivers for the product.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Bonjour can't find installed driver

I am trying to set up in my office at work what I have working at home. At home I have an Airport Extreme Base Station with several Macs and a Dell laptop running without any problem off it. I have an Epson C88 hooked up to the Airport Extreme via USB and I am able to print from the Dell laptop to the Epson. I had to install the driver first with the Dell hooked up directly to the printer, otherwise Bonjour didn't recognize it. So today I tried to do this setup at my office. I have the same Airport Extreme connected to my iMac and also running a Toshiba laptop without a problem. I installed the driver for my HP 2600n Laserjet onto the Toshiba while it was connected to the HP printer. I was able to print to the printer fine. Then I connected the HP 2600n to my Airport Extreme. When I opened up Bonjour the HP 2600n showed up in the window but it says it is unable to find the driver. I reinstalled the driver without success. I tried using generic/postscript without success. I was able to print from my iMac via Bonjour to the HP 2600. And I was able to print from the Toshiba to my Canon MP620 which is connected directly to my iMac via USB. Bonjour recognized my Canon through my iMac but can't find the driver for the HP. What gives?

Thanks for the reply Greg. I'm confused then, because it leads you to believe that you can select a driver by choosing "other" in the add printer dialog.
Again, I already did used the combined updated to get to 10.4.7--that's what gave me the problem in the first place.
I checked the PPDs in the folder you mention and there isn't a single Canon mentioned.
I'm just not understanding why it knows exactly where to look to find "Canon IJ Printer Driver" when I'm hooked up through USB, but has no clue when it's through Bonjour.

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

HT1341 I have a new mac pro with Mountain Lion 10.8.1 but cannot connect to my Canon 6000B printer and can't find a driver download on the net - can anyone help on this?

I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?

dino1335 wrote:
Thanks for getting back. I need help here
1 What do you mean by System Information? Is that System Preferences?
System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
dino1335 wrote:
2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
dino1335 wrote:
3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
dino1335 wrote:
FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's.

Windows 7 can´t find the driver for HP Officejet 5510. (Windows Update is set to automatic.)

Hello everyone, I just installed Windows 7 - 64 bit. Supposedly the driver for the HP Officejet 5510 will install automatically in Windows 7 when connected via a USB, which is not happening.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4063&product=311...
I am getting the message that Windows 7 can't find the driver. I don´t understand why?
My Windows Update is set to automatic.
I see the device under printers. But when I click on it it says driver missing.
Is there any solution? Possibility to get the driver some other way? Unfortunately HP doesn't provide a download on their website.
Can anyone help me, pleease?
Honza

I have the same problem. I spent all this money to get more features, not less so Windows 7 should run all of my XP stuff. Now I see that my HP Officejet 5510 all-in-one won't scan and I can't save in pdf format. C'mon HP....give us a driver! If I wind up having to buy another printer, I swear it won't be an HP if I get abandoned on this one. And I'll also switch vendors for all of the printers I'm responsible for replacing at work too.

New MacBookPro. Where can I find a driver for my Microtek Scanmaker 3600

I recently bought a new MacBook Pro (10.6.8) but to date, haven't been able to find any software/driver to use for my scanner, including the Microtek site. I have a Microtek Scanmaker 3600 that still works perfectly. I have searched forums and online sites for software to use the scanner on the new laptop and hate to think I need to buy a new scanner when the 3600 works fine. I have an HP Deskjet 930C and was able to find the software/driver to use on the new laptop. Does anyone know where I can find the software/driver to get my scanner to work?
Where can I find a driver for my Microtek Scanmaker 3600. Tried VueScan and TwainSane without success. Do not want to buy a new scanner when old one runs great. Please Help?
Thanks!

Thank you for the response.
I downloaded it and it keeps telling me "No Scanner Detected." I looked on their website under supported scanners, found my Microtek ScanMaker 3600 and it says "NO" for Mac.
http://www.hamrick.com/vuescan/microtek_scanmaker_3600.html
I just sent an email to them asking if VueScan does support a my scanner. I hope it does. I have been searching but am not proficient or know enough of what to look for. I just don't want to have to buy another scanner.

I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

Here to help shed some additional light on this case, jdondr. I also own a Maxx. With your phone, if you access the Gallery, there should be a folder named: Messaging. If you look at the upper left hand corner, you should see a drop down box. Is it currently set to Albums?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Where can I find a driver for STLab USB 2.0 to VGA Adaptor for Macbook Air

Where can I find a driver for STLab, USB 2.0 to VGA Adaptor for Mcbook Air

Thank you for the response.
I downloaded it and it keeps telling me "No Scanner Detected." I looked on their website under supported scanners, found my Microtek ScanMaker 3600 and it says "NO" for Mac.
http://www.hamrick.com/vuescan/microtek_scanmaker_3600.html
I just sent an email to them asking if VueScan does support a my scanner. I hope it does. I have been searching but am not proficient or know enough of what to look for. I just don't want to have to buy another scanner.

Can't find home drive after reinstallation of O.S.X

Similar Messages

Maybe you are looking for