Can't find instructions for setting a PDF form to allow users to type in the fields and save the form.  Thanks

Can't find instructions for setting a PDF form to allow users to type in the fields and save the form.  Thanks

Hi,
Have a look at this page Acrobat refers to them as "Reader Extended PDF", Adobe Acrobat X Pro * Enable Reader users to save form data
Regards
Bruce

Similar Messages

  • I have been unsuccessful merging serval pdf files into one file.  I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version.  When I open the file I think I have saved, it shows only the original pdf.  Advice would be

    I have been unsuccessful merging serval pdf files into one file.  I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version.  When I open the file I think I have saved, it shows only the original pdf.  Advice would be appreciated.  Thank you.

    wouldnt it be easier if you could do something like this?
    https://discussions.apple.com/thread/3392535

  • Highlighting TEXT - not the field - and clearing the set value for a new one

    I have a form in which various text fields are set with a message to inform the user as to what kind of information I want typed in. My goals are:
    1. Have the text get highlighted so when the user starts typing, the "old" value gets replaced with the "new"
    2. Or, when the user tabs or clicks in the field all of the "old" value is deleted and they can start typing the "new" value from the beginning of the field.
    I am trying to eliminate having to manually highlight the field in order to type in the needed information. But each field needs to start with a value so the user knows what kind of information I am looking for.
    Does this make sense? By the way, I have no JavaScript experience...uh oh!

    Use the Media Manager (under the File menu bar item).
    Link:
    What Can You Do with the Media Manager?

  • Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with a Anritsu make(model-MS710) Rf spectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire from the instrument and save the data in PC.the data

    Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with an Anritsu make(model-MS710) RFspectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire data from the instrument and save it in PC for printing purpose.

    Hello,
    Unfortunately I was unable to find a driver for this instrument. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
    http://www.ni.com/devzone/idnet/other.htm
    We develop drivers in CVI and LabVIEW based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one. While this would not provide you with a QBASIC program, you may be able to create a DLL that you could call from QBASIC.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://www.ni.com/devzone/idnet/development.htm
    We also have a syndica
    te of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
    http://www.ni.com/alliance
    Good Luck,
    Kim L.
    Applications Engineer
    National Instruments

  • Where can I find instructions for the "print edit" add on (after download & installation) ?

    I've downloaded & installed the "print edit" add-on successfully, now I need instructions on how to use it. Is there a type of manual or other support option for this?

    A good place to start is the extension's page on the Add-ons site:
    https://addons.mozilla.org/en-us/firefox/addon/print-edit/
    Unlike many others, the author has posted pretty detailed instructions and lots of screen shots. This isn't the best format for absorbing the information because the text and images aren't integrated, but hopefully with a little flipping back and forth you can get a solid start.

  • Somebody stole my iphone :| .. and i used someone else's apple ID i also have find my iphone but i don't have an apple ID (i use someone else's) So how can I get my phone back?? If i go to the apple store...can they find it for me without hesitation?

    IT WAS AN IPHONE4s

    Apple can't find it for you.  You have to go to icloud.com on a computer and sign into the iCloud account that was used on the phone, then see if you can track it as described here: http://help.apple.com/icloud/#mmfc0f2442.  If you don't know the password for your iCloud account you won't be able to sign in to track it.
    If it was stolen, contact the police and your carrier, and change your passwords.

  • Do you need an additional slot for the RBS and does the RBS count as an additional hard drive in the Sharepoint 2013 Server farm?

    Hello Community
        If you have a clustered Sharepoint 2013 Server farm running RAID 10, on a
    clustered WS2012 R2 server that has 10 hard drive slots:
            (4) drives being part of the Sharepoint 2013 Server farm
            (1) drive for the Web App Server
            (5) are for hot swap if any of the production hard drives fail
        The question(s) is:
            - If the server only has 10 slots for hard drives are you still allowed to add a
    NAS/RBS drive and does the NAS/RBS drive get clustered also, or does this scenario require
    reducing the RAID level down to RAID 5 to allow for NAS/RBS hard drive?
            - Does the NAS/RBS hard drive need a hard drive for hot swap?
            - Does the NAS/RBS drive have to have Sharepoint 2013 Server or WS2012 R2 running on it?
            - Does the Web App Server have Sharepoint 2013 running or just WS2012 R2 running on it?
        Thank you
        Shabeaut

    RAID 10 requires a minimum of 4 hard drives. The LUN for RBS must be attached to the SQL Server, not SharePoint server, as a local drive. You just need to be running the minimum required OS for the version of SQL Server you're using.
    Do you mean Office Web Apps by "Web App Server"? If so, that cannot have SharePoint installed on it. Otherwise, if you're just referring to it as another SharePoint server, yes it would have SharePoint installed on it.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Instructions for setting WRT54GS security to WPA2? Can't find them anywhere.

    Hi,
    I'm an amateur at this, so please excuse this load of ignorant questions.
    I have 2 PC clients, both Dell Dimensions 3.2GHz 1GB RAM, Wireless-G adapters. OS is Windows XP SP2
    The router is a Linksys WRT54GS. I'm using the wireless ports only, at least when I'm not modifying the security settings. Then I use a temporary cable to connect one of the PC's to the router.
    I also have a TiVo DVR series 3 with a wireless adapter.
    The router came with a copy of Linksys Advisor. When I ran this software I was able to set the security level to WPA-Personal. However I could find no option to set the level to WPA2.
    I know the TiVo supports WPA2 because I saw the option when I was configuring it for WPA-personal.
    My question(s):
    Why doesn't EasyLink Advisor have an option to set the security level to WPA2? Is it just deficient, or does it check to see if the client PCs support WPA2 and disable the option if they don't?
    How would I go about checking if my PCs support WPA2?
    Finally, if I have to set the security to WPA2 manually, what is the procedure for doing this?
    It's pretty easy to see how this can be done on the router's little web server pages; but as soon as I set the security to WPA2 there, I'm going to lose wireless connections to the PCs and I won't be able to access the router.
    I know I can get there via a cable connection, but then what do I do? How do I set up my clients for WPA2?
    What's a real pain about all this is that the EasyLink Advisor gives hints on how to optimize performance on secured wireless systems. It advises going to WPA2! But its Wizard doesn't give the option to do that. Its offline help file is minimal - it just says "use the wizard" and that's it.
    The online help describes how to manually configure WPA but not WPA2. And the instructions for WPA are incomplete. They explain how to set up the router, but then do not explain how to use the enccryption keys when reconnecting client PCs. They just say to select the SSID in the wireless icon's connect menu, then click on connect. Where does the key go?
    Thanks for your time in reading this,
    Big Al Mintaka

    First of all, Windows XP SP2 can do WPA2, however it requires a patch.   Go to Microsoft Knowledge base, article ID=917021 and it will direct you to the patch.
    Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
    Additionally, be sure to give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    As to why EasyLink Advisor works the way it does - I just don't know.
    To setup WPA2, you will first need to patch Windows XP, then, using a computer that is wired to the router, go into the router and change the encryption to "WPA2 - personal"  with  "AES".  Reboot modem and router.  You are correct that you will now loose your wireless connections until you update the settings in your wireless devices.
    Next go into your computers and likewise change the encryption to "WPA2 - personal"  (= WPA2 = PSK2 ).   (Note:  You do not necesarily need to specify "AES" in your computers (or Tivo), but if you are given a choice between TKIP and AES, choose AES.)
    To find these settings for your computers, go to the wireless software in your computer, and go to "Preferred Networks"  (sometimes called "Profiles" ).  There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use.  Delete your current network  (this will clear any old settings).  Reboot computer.  Return to "Preferred Networks" and enter your network info (SSID, encryption, and key). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".  Reboot computer.
    You will need to check the Tivo manual for how to change the Tivo to WPA2.

  • Where can I find a complete set of compiled swfs for 2.0?

    Where can I find a complete set of compiled swfs for 2.0?
    I want to place these directly on my website.
    Thanks,
    Ken

    So basically Apple is hiding which networks allow rentals vs. purchase until you buy an ATV2,
    and then find out you can't watch "The Closer", "Men of a Certain Age", "In Plain Sight", etc., etc.
    Or until you spend a bunch of time digging through iTunes show by show...
    Sad...Guess I'm sticking with Cable for a while longer....

  • Is it possible to share my calendar with all my subscription? If so How can i find URL for this?

    Is it possible to share my calendar with all my subscription? If so How can i find URL for this?

    Hi yilmazfromlondon,
    The resource below explains how to share your iCloud calendars publicly.  Is this what you are asking about?
    iCloud: Share a calendar with others
    http://support.apple.com/kb/PH2690
    iCloud: Share a calendar with others
    You can share a calendar both publicly and privately with other people. For specifics about viewing and editing privileges for shared calendars, and how participants can access the calendars, see Calendar sharing overview.
    Share a calendar privately
    Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
    Note: You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.”
    Type the invitee’s email address in the Add Person field and press Return.
    Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only).
    For each person you want to share the calendar with, repeat steps 2 and 3.
    When you’ve invited everyone and set their privileges, click OK.
    Invitation emails are sent from your iCloud email address to the participants you specified.
    Share a calendar publicly
    Click the Share button to the right of the calendar you want to share, then select Public Calendar.
    Note: You can also share the same calendar privately. For instructions, see the previous task, “Share a calendar privately.”
    To invite people to view the calendar, click Email Link.
    Type one or more email addresses in the To field, then click Send.
    The people you specify automatically receive an invitation email that includes the calendar’s URL. An invitee doesn’t need to be an iCloud user to accept an invitation to view a shared public calendar.
    In the sidebar, a shared calendar has a dark Share button.
    You can also resend invitations to one or more invited participants at any time.
    Last Modified: Feb 5, 2015
    Cheers,
    Judy

  • How can I find ringtones for sale in iTunes? I don't see it as a category anywhere.

    how can I find ringtones for sale in iTunes? I don't see it as a category anywhere.

    Ferretbite wrote:
    You could also download the Ringtone Maker all for iPhone in the AppStore and create your own custom ringtones and message tones.
    Not needed.
    Easy enough to do in iTunes.
    Find the song you want and note the start/stop time you want the ring tone.
    Right click - get info, click the Options tab and set the start/stop times as above.
    Right click - Create AAC version. This creates a new file.
    Drag this new file from the iTunes window to the desktop.
    Delete the file from iTunes and also select Delete from hard drive.
    On the desktop, rename the file whateveryouwant.m4r (first part you can change to whatever you want & change the extension to .m4r).
    Drag the file back to the iTunes library at top left.
    Make sure iTunes prefs > General has Tones ticked.

  • Can't find bundle for base....

    Help needed....
    When making a ResourceBundle.getbundle("texter",getlocale())
    from an applet, within Init, I get MissingResourceException with the message Can't find bundle for base name texter....
    Also, to mention is that within Init I set SystemSecuity.addProvider("IAIK")This is removed in destroy SystemSecurity.removeProvider ("IAIK").
    The name on the properties file is texter.properties.
    The above problem only occur the second time the applet initializes.
    The applet is located in a servlets application.
    Operating system is Windows NT, using IE and Netscape.
    Last but not least, this is only a problem when using JRE 1.4 not when using JRE 1.3.

    Hello!
    I am using IBM WebSphere Test Environment as a servletEngine, i put the propertiesfile in a jarfile together with
    the appletpackage. So the servletpage loads everithing in the jarfile to the client. The strange thing is that this works the first time but not the second time.
    Thanksfull for any suggestions!
    /Elena

  • Can't find driver for SB0

    Hello,
    I have an Audigy card (SB0230), and I can't find a driver for it. I tried few solutions, and here are what I done already:
    - I tried to install the newest driver from creative.com for Audigy board, but installer don't recognized my card and stopped.
    - I installed KX Audio driver. Everything went ok, installer recognized my card and I had sound, but I bought this card not only for music, but for games too, so lack of EAX led me to uninstall this driver.
    - I tried from the other side with the official driver. I unpacked it with WinRAR, installed it from Device Manager. It told me that this driver is not compatible with my device, but I ignored it and after restart I heard sound Unfortunetly, as for now I don't have any control over the card. Even Realtek has a control panel, so I figured out, that I must run installer to do something with my card, than just set volume :P Am I right? Where can I find driver for it's
    I have Windows Vista, but in XP everything was the same (and I used KX in XP).

    For Vista try this one,
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=2502

  • I have CS6 in a disk and I can't install it,I get a window with my name and asking for a pass word,the window reads like this:set up wants to make changes type PW to allow this.I type my adobe PW and it doesn't work.I am stake in that step.

    What can I do?I can't install CS6 in a disk.I get a window reading:set up wants to make changes type PW to allow this.
    Type my Adobe PW and is not that.This is frustrating!!!!Downloading, Installing, Setting Up

    Hello ozne,
    as a first step please have a look at these "General infos about the Adobe Account"
    https://www.adobe.com/account.html and http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    Did you purchase your product from these firms like Amazon? If yes, this is not a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
    The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
    Good luck!
    Hans-Günter

  • Where can I find Documentation for Oracle financial installation

    Hi
    Where can I find Documentation for Oracle financial
    installation as which all modules to be downloaded for linuk server etc
    here is what I have found
    ===================================
    Oracle9i Application Server, Version 1.0.2.2.2 CD Pack for Linux x86 [Act as Server][to be installed on main linux server]
    ===================================
    Oracle® Applications 11i Release 9 CD Pack for Linux x86     [Act as client][to be installed on client sean,AJ,Vinod]
    ===================================
    Internet Developer Suite (1.0.2.4.1) CD Pack (with iAS Pack) for Microsoft Windows (32-bit)
    ===================================

    user11872870 wrote:
    Hi Tubby,
    http://www.quest.com/documents/list.aspx?SearchOff=true&ContentTypeID=20&prod=1
    This link has many pdf files but none has the useful information. Those pdf's are just 2 or 3 pages each.Sad Christmas for you then i suppose.
    Perhaps you could contact the vendor (quest) and get them to help you in your search for whatever it is you're looking for. An Oracle SQL and PL/SQL forum is not the venue for this, please mark the question as answered, and good luck in your search.

Maybe you are looking for

  • Problem with hardware acceleration on HBO GO

    I just got a Zotac ZBOX AD02 (AMD E-350 APU w/ Radeon HD 6310) and in general it's working great.  However, I  have a problem with Flash video on HBO GO.  For the first minute or so  of steaming video, everything seems perfect.  Video is high quality

  • Problem while running the report from a form

    Hi, I am able to call a report from forms9i using run_report_object. This report just has a boilertext within it. I did this just to check the functionality of run_report_object built-in. This worked perfectly. But when I am trying to call a report b

  • HT3281 64G iPod Touch sync problem with podcasts

    2 of 6 podcasts didn't load when I sync'd my 64G iPod Touch.  They appear to be in the podcast library on my laptop of purchased podcasts. What do I need to do to get them to sync?

  • Photoshop CS6 crashes at startup

    I have just installed Photoshop CS6 trial and it crashes very often at startup (with windows error reporting message). I disabled plugins, GPU but no luck. What can i do next? (Ps CS5.1 worked fine)

  • How to create Streaming Stars?

    I really like what Macy's is doing with streaming stars on their store signs and bags.  They look like they were created using a scatter brush and the artist is doing a really nice job with the flow and swashes.  I tried it by creating a scatter brus