Can't get ch2 to work with tktds1k2k for Tek TDS 1002.

Why won't the tktds1k2k "Getting Started vi" display ch2? I modified it so that the Vertical.vi gets the same channel source as the "Read wvfrm to array vi". I am using a tds1002. When I set the source to ch2, the Read waveform to array vi times out. It works fine with source set to ch 1. I am using LabView 6.1 and GPIB-USB-B.

Hey Ed,
Looking at the code for the Getting Started vi it doesn't look like you should change any code for the example to work for channel 2. All you have to do is change the control on the front panel when you open the example from Channel 1 to Channel 2. The Source should look like the screen shot.
If the application doesn't work after making this change then I suggest you redownload the instrument driver incase some of the source files were modified or damaged.
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/20152aede3a9e06786256bfe005ff2df?OpenDocument
I hope this helps out.
JoshuaP
National Instruments
Attachments:
panel.bmp ‏1040 KB

Similar Messages

I use incredimail for my email and can not get it to work with foxfire for sending links etc

i will try to email a link and at first it went to outlook but i use incredimail so i need to know how to make it launch incredimail
== This happened ==
Not sure how often
== everytime i try to send a link

See this KB article.
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

How can i get acrobat to work with windows vista

How can I get adobeexportpdf to work with windows vista?

But if, on the other hand you do mean Acrobat, please let us know what problem you are having.

Bought print central app have an impact Lexmark s300 series wireless printer can't get it to work with my I pad , help

I bought the print central app have a Lexmark s300 wireless printer can't get it to work with my I pad any suggestions

To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
Hope this helps.

Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?

Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?

You have to look at the email protocol being used. the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
Does the email system permit delivery receipts to be requested?
Just some of the things one needs to determine from the information provided by the email service provider.

How can I get Lion to work with label printer- Brother QL 570 or Dymo 450 Turbo?

I can't get Lion to work with label printers, either Brother QL 570 or Dymo Turbo 450. I want to uninstall Lion and use Snow Leopard unless there is a way to make Lion work with these devices. Any ideas?

Dymo has released new drivers since Lion came out. Have you downloaded and
installed them from the Dymo website?
Some people have said that their Dymo label printers were set to off line by Lion, but
worked fine after going to Print & Scan, selecting the Dymo printer, and making sure
it was active/on-line. I had to do that with my Dymo 450 Label Writer.
I cannot offer any tips about Brother, but you may wish to check their website
for latest drivers.

My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

If it's not an Airprint enabled printer, you can not natively through your iPad. BUT, there are apps you can purchase in the App Store, like Print Central ($9), which is what I use myself and works well for my needs.

I have Nortons security suite under the old version the Idenity protection worked I kept all my passwords under this which used a master pasword I did not save passwords any were else and now can not get it to work supplying passwords for my l0gon site.

I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.

Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12

HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?

I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???

If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao.

I need help with ISIGHT! I can't get it to work with MSN!

HI,
My issue is this... I have AIM/AOL and I am able to see myself on webcam.. however noone else can unless they HAVE a webcam... My first question is- "DO you have to have a WEBCAM on both ends for both people to see you?" Does the person I am chatting with HAVE to have a webcam to see me? If so WHY? They should atleast be able to see ME if I want them to... Also if they are using windows for PC platform... can they use a pc webcam and still connect with me through my isight although I am on a mac?
My second major ISSUE is.. WHY is the isight only compatible with AOL/AIM? I was told when I bought this it would be compatible with MSN Messenger for windows AND the MAC version... I have both and the isight does not show up on it... CAN ISIGHT be connected to msn messenger for MAC??? PLEASE help me!
I called APPLE tech support and they couldn't even help me! They told me to call Microsoft! Anyhow- one guy did say he was able to get his ISIGHT working with the MSN messenger for MAC platform.. do you have ANY idea how to do that?? The thing is ALL my freinds are on PC's and have MSN messenger..
ALSO- someone on mac rumors told me to look for a guy names RALPH! Said you know A LOT about mac and pc compatibility! PLEASE HELP
Bottom line - I want to use isight with msn so my msn pc friends can share webcam... I also have virtual pc software... is it easier to just get a pc webcam and do it through there? ( i tried that and it didn't work either) i need major TECH SUPPORT!
THANK YOU

Microsoft's Messenger for Mac (MSN) does not support webcams at all.
I have found the best alternative to MSN to be aMSN with macam for the webcam driver (it is a cheap usb webcam). Both are free open source projects. I guess if you use an iSight you will not need macam.
aMSN can be found here: http://amsn.sourceforge.net/
macam can be found here: http://webcam-osx.sourceforge.net/
The speed is substantially faster and it is far more stable than Mercury in my experience.
The only difficulty is the camera is often shown as being "in use by another application". To counter this I start macam, then plug in the camera (or unplug and plug back in). Then I start aMSN.

Can't get iTunes to work with 2 User Accounts

I've tried to find my specific problem on previous threads but it seems that each situation is just a little different. I have two user accounts on my family shared Windows XP Home edition PC. Last week I installed my son's iPod/iTunes using the install disc. I changed the default to C:\documents and settings\user1\My Documents. Life was good. Then I got an iPod of my own. I followed the same install as above only changed the path to user2's account. I went to iTunes and everything was working just fine for user2. The next time user1 tried to access iTunes on his desktop under his Windows user account, he said it just kept searching. (Windows error message with flashlight) He decided to pop the install disc in and see what happens. (yikes!) He took all of the defaults and left both users with nothing working. Infact at that point iTunes was still on the user desktops but only pages and pages of HTML code would display if you tried to launch iTunes. I deleted all traces of itunes and iPod I could locate and went through the same reinstall process as before. I was able to locate user 2's libary and everything worked fine. (That's mine) Poor user1,(my son) we can't get anything installed to his user. The install disk recognizes only my installation and wants to remove everything first. I;ve done that a few times and still can only get user 2 working but not both.

hi Mommatron!
just checking on something. have you ever had any error messages at any stage of proceedings?
b in particular,
have you ever had an 0x80040707?
love, b

HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

I have a hdmi dock connector and can not get it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

With what apps? Not all apps require video output.

Can't get ch2 to work with tktds1k2k for Tek TDS 1002.

Similar Messages

Maybe you are looking for