Can't get direct rendering to work

On my notebook with an Intel 945GM card, I can't get direct rendering to work.
I'm using the 'xf86-video-intel' driver.
/etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad" "AlwaysCore SendCoreEvents"
# InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap"
Option "DontZoom"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "GLcore"
Load "record"
Load "dbe"
Load "glx"
Load "dri"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Touchpad"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
DisplaySize 338 211
Identifier "Monitor0"
VendorName "AUO"
ModelName "2174"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
And here is /var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686
Current Operating System: Linux zg6y3zg9f3x 2.6.24.3-ARCH #2 SMP PREEMPT Sun Mar 2 23:22:11 CET 2008 i686
Build Date: 03 February 2008 02:54:48PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 3 00:20:16 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap"
(**) Option "DontZoom"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "Mouse0"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d65c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1025,0090 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1025,0090 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1025,0090 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0090 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0090 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1025,0090 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1025,0090 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0090 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0090 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1025,0090 rev 02 class 0c,05,00 hdr 00
(II) PCI: 05:00:0: chip 8086,4222 card 8086,1000 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:01:0: chip 14e4,170c card 1025,0090 rev 02 class 02,00,00 hdr 00
(II) PCI: 06:04:0: chip 1524,1412 card 1400,0000 rev 10 class 06,07,00 hdr 82
(II) PCI: 06:04:1: chip 1524,0530 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: 06:04:2: chip 1524,0550 card 1025,0090 rev 01 class 08,05,01 hdr 80
(II) PCI: 06:04:3: chip 1524,0520 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: 06:04:4: chip 1524,0551 card 1025,0090 rev 01 class 05,01,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:28:3), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,7), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:4:0), (6,7,10), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0200000/19, 0xc0000000/28, 0xd0300000/18, I/O @ 0x5088/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0280000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[1] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[2] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[3] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[4] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[5] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[7] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[8] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[9] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[15] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[16] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[17] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[18] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[1] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[2] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[3] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[19] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[5] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[6] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[7] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[8] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[9] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[11] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[12] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[13] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[14] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[15] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[22] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[28] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[29] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[30] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[31] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0200000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "AUO", prod id 8564
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "AUO", prod id 8564
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (338, 211) mm
(**) intel(0): DPI set to (96, 154)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0300000 - 0xd033ffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xd0200000 - 0xd027ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xd0000000 - 0xd0001fff (0x2000) MX[b]
[8] -1 0 0xd0100000 - 0xd0100fff (0x1000) MX[b]
[9] -1 0 0xd0544000 - 0xd05443ff (0x400) MX[b]
[10] -1 0 0xd0340000 - 0xd0343fff (0x4000) MX[b]
[11] -1 0 0xd0280000 - 0xd02fffff (0x80000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd033ffff (0x40000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0xd0200000 - 0xd027ffff (0x80000) MX[b](B)
[15] -1 0 0xd0003100 - 0xd00031ff (0x100) MX[b]
[16] -1 0 0xd0003800 - 0xd000387f (0x80) MX[b]
[17] -1 0 0xd0003400 - 0xd00034ff (0x100) MX[b]
[18] -1 0 0xd0003000 - 0xd000307f (0x80) MX[b]
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[22] 0 0 0x00005088 - 0x0000508f (0x8) IS[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x00005420 - 0x0000543f (0x20) IX[b]
[26] -1 0 0x00005440 - 0x0000544f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x00005400 - 0x0000541f (0x20) IX[b]
[32] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[33] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[34] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[35] -1 0 0x00005088 - 0x0000508f (0x8) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "i915"
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(==) intel(0): VideoRam: 262144 KB
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
(II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "VertScrollDelta" "100"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(--) Touchpad touchpad found
(**) Touchpad: always reports core events
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Touchpad)
(II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(--) Touchpad touchpad found
Could not init font path element /usr/share/fonts/Type1, removing from list!
AUDIT: Mon Mar 3 00:21:47 2008: 10765 X: client 7 rejected from local host (uid 1001)
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c80000 (pgoffset 3200)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
(II) intel(0): 0x00640000-0x00c7ffff: front buffer (6400 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00c80000-0x01f3ffff: exa offscreen (19200 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(--) Touchpad touchpad found
Can anyone help me with this?
Last edited by bughunter2 (2008-03-03 01:06:30)

The standard arch kernel includes all the required modules, at most you need to load them explicitly listing them in MODULES in /etc/rc.conf
You need also the hw specific stuff, that is i915 and intelagp. Check lsmod and see if they are loaded. If they are not, inspect dmesg and see if udev tries to load them and fails for some reason.
I remember some cases where intelagp and i915 are not loaded by udev in the right order, if this is your case you can try to list them in the right order in MODULES.
There should be no need to recompile the kernel or to install a particular version of dri (just use the arch packages for mesa, libdrm etc; but I guess you have them already)

Similar Messages

  • How can I get my renders to work in the background?

    Hi,
    I installed After Effects pretty much without changing anything, so the settings are more or less default.
    I'm using a Macbook Pro with OS 10.6.8 and After Effects CS6
    I have enabled media and disk cache, max disc cache is at 100GB and I have an external drive (with 900GB spare) as the volume selected beneath that option. My internal SSD has not much spare on it. I previously had the internal SSD as the disc cache and still had this same problem.
    My project is 1920 x 1080 25fps - And I'm trying to render to Quicktime. I've tried rendering to stills and then outputting to Quicktime (so as to have less computational effort), then running them through but the same problem persists.
    If After Effects is the application in focus the project renders fine.
    If After Effects is not the application in focus - ie. I work with it rendering in the background, the 'FINISHED' sound plays and the render is cut short a short while after I started working in another program.
    The project render time is about an hour, so it's not really convenient.
    I've googled extensively and posted this here before and no solution.
    Please help.
    Toby
    ps. ADOBE: Don't mean to be rude, but is there some fix for this text entry box where the cursor randomly jumps to a previous line? - still broken guys!

    Hi Todd,
    Thanks, I've now installed the updates. Unfortunately the problem persists and furthermore, AME does not go the distance with rendering the full project, dropping the process after around the 5-8% mark (on first and second try).
    I can render the project successfully if AE is left unattended in the 'foreground'
    Please find attached screengrabs of my system profile and current AE settings (Disk and Cache settings were changed recently from having 100GB disk cache on external USB3 drive - still same behaviour).
    I notice there is no error log produced from AE as it seems to think the render is successfully completed. Please advise if I can produce a log to help troubleshoot this problem, as it seems AME does not provide a workaround.
    Thanks in advance.

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • Can't get my TC to work in Bridge mode...

    I installed Time Capsule TC to my exsisting network, that has a Linksys router.  Can't get my TC to work in Bridge mode.  Suggestions?
    I have the TC directly connected to the router and want to use the TC for wireless Time Machine back ups and to share other hardrives via
    the network.  I also have an old airport express for airplay speakers in one room.  And an airport extreme that I thought I had set up to extend
    the network wirelessly.  I have yet to find a concise and clear list of steps to make this happen. 
    Any help would be appreciated.
    Holly

    The problem is the steps changed with the new airport utility..
    I can tell you the steps on a 5.x utility. If you run Lion then download the real tool.
    http://support.apple.com/kb/DL1482
    Go to manual setup.. internet tab.. connection sharing.. select off, bridge mode.. update the TC..
    Wasn't too hard was it.

  • Direct rendering not working after upgrade to Xorg 7.0

    I have aATI radeon 9200 card and although its supposed to be supported in the new xorg, direct rendering doesnt work. I have made the neccesary changes in xorg.conf. I deleted the ati drivers load "dri" and "glx" installed all the needed modules.
    Does xorg 7.0 work with the propritery ATI drivers? My system is generally slow too and not as responsive as before.
    Can some one with a working DRI post their xorg.conf. My PC is a compaq presario.
    thnx

    Did you remove the ATI drivers and install libgl-dri? Without libgl-dri, either you have software GL with libgl-mesa, or some ATI OpenGL lib that runs in fallback mode.

  • I can't get my ichat to work.

    i can't get my ichat to work. I made an aol login but it says my password is incorrect, which i know it is not. I have a MobileMe but i can't remember the password to that. Every time I try to change my password it just changes my msn address on apple id. I have ox s lion operating system but, I couln't get the ichat to work before that either. I can use facetime tho.

    HI,
    If you created an AIM Name here then can you now Login Here > https://settings.aim.com/
    AIM allow some other characters that alphanumeric ones but these are limited to ! @ # and the . (full stop/dot)
    Is it possible that you have used other characters in the password ?
    If you created an AOL Login have you used the full name ([email protected]) in the name in iChat ?
    AIM never tell you directly that it is the Password.
    You can get to infer it is the password when compared to other messages but it does normally refer to  "Name or Password".  (I just want to check that is what you are seeing)
    MobileMe Name
    Checking your Own Computer
    Open Keychain Access in the Applications/Utilities folder
    Have the Login item to left highlighted
    Have the Passwords items listed if using lion lower left
    Check the list on the right for your MobileMe name.  It may possibly listed with an Cloud icon or the "A" created by ther pen brush and ruler icon.
    It may also get listed twice or more if you have tried different passwords and asked for them to be saved.
    Double click one.
    In the new Panel that open change to the Access tab and check iChat is in the list if using Allow Specific items.
    Return to the Attributes tab
    Tick the Show Password box  (Dialogue biox appears needing your Mac User Password and to Allow Once
    If this password is correct then delete any other entries.
    If incorrect then check others and edit one if required.
    (I am hoping you will see one you recognise)
    The iForgot site can be used to change the password.
    It requires you have access to the linked email you used.
    Or that you remember the security questions that you gave for the MobileMe name.
    (Presumably you know your Date of Birth which you also get asked. )
    10:03 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Is there an adapter can i get so square will work with the otterbox i have on my iphone

    Is there an adapter can i get so square will work with the otterbox i have on my iphone, I love the otterbox and want to keep it on all the time. not only does it protect my iphone it, it makes it easy for me to hold because I have trouble with my hands. please help

    That's a good question. The main problem with the Square readers is that the plug is designed to send data to devices, rendering most headphone extension cables useless.
    Reading another forum I saw this: http://www.amazon.com/gp/product/B001BN7XSM
    Give that a try. Claims to work perfectly for Square. NOT headphones.

  • I just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

    i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please

    Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
    But hey thanks for your help,

  • My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address.  I can't get rid of my "work" email address on my iPhone 4S

    My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address.  I can't get rid of my "work" email address on my iPhone 4S

    Hi Sister Kate,
    If you change the Apple ID you are using on an iPhone or other iOS device, there are several places you need to change it on the device. See this article -
    Apple ID: What to do after you change your Apple ID
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Can't get video chat to work outside of LAN...

    Hello,
    I can't get video chat to work.
    All computers, LAN and WAN are running the latest iChat under 10.4 (including latest updates).
    Within our LAN, via Bonjour, everything is fine.
    I'm now trying to set up an offsite Intel iMac (10.4) and I can't connect via video chat with them.
    I've had this problem in the past and eventually gave up (so much for "it just works" - I've spent the last 10+ years dealing with Macs and Mac-based networking, I can't imagine "my dad" figuring this all out). Trying again with fingers crossed...?
    If someone could help, it'd be much appreciated.
    Thanks,
    Kristin.
    The studio router/firewall is a SonicWall TZ 170 Standard.
    This router has a static IP.
    All suggested ports on the SonicWall are set up correctly to allow in/out from our LAN.
    All computers on the LAN have static IP addresses.
    Quicktime streaming settings set as suggested.
    OS X Firewall on all computers = OFF.
    No iChat add-ons on any computers.
    Internet connection speed = 7404 kb/s
    The offside router/firewall is a LinkSys WRT54G
    This router does not have a static IP.
    DMZ is ON and set to the only computer connected to it.
    Computer has a static IP address.
    Quicktime streaming settings set as suggested.
    OS X Firewall on all computers = OFF.
    No iChat add-ons on computer.
    Internet connection speed = 5116 kb/s
    If any more information is required to help you help me, just let me know!

    Does the TZ170 have UPnP or Port Triggering then ?
    I can not see that it does here
    Opening the ports in the manner listed on that link will only allow one computer (IP) to use the open ports.
    The Linksys is router and you have not mentioned what the modem is doing at that end.
    Why not use UPnP here ? The Linksys does it (on the Administration page)
    Most likely this needs the Respond to Anonymous Pings checked on the Security page.
    9:29 PM Thursday; January 17, 2008

  • My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

    My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

    Can you start Firefox in [[Safe mode]] ?
    You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After upgrading to Lion can't get Boot Camp to work! Just get "startup dusk cannot be portioned or restored to a single partition"?

    After upgrading to Lion can't get Boot Camp to work! Just get "The startup disk cannot be partitioned or restored to a single partition". Anytone?

    This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
    Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
    Then partition.
    Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
    You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

  • I recently transferred my ipnone service from at&t to another carrier the phone worked fine until i tried to up it with itunes i now have a frozen itunes logo and a plug on the screens my phone is a iphone 3g how can i get my phone to work again?

    my ipone 3g is frozen with aitunes logo and plug after i tried to update it from apple. the phone worked fine even thou i changed carriers from at&t to Simple celleur. How can i get my phone to work?

    As AT&T has not officially unlocked your phone it must have been hacked to use another carrier.  So when you updated it has relocked itself to AT&T. There is no official unlock so this will happen anytime you update.

  • Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

    Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

    Bose Product Support

  • How can i get my wireless to work on my printer hp officejet pro 8600

    how can i get my wireless to work on my printer hp officejet pro 8600

    You'll get faster help w/this question by posting it in the Wireless forum...here:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/bd-p/Networking
    I am an HP employee.

Maybe you are looking for

  • BI Java and BI ABAP -RSPLAN issue

    Hi All We are working with BI system ,using BI 7.0 Java and BI ABAP as separate systems on same host. Already run the template intaller for BI Java and ABAP integration. But facing some issue ,when going ot BI ABAP and RSPLAN and clicking the Start M

  • How to get blank records at the start of report output for label sheet?

    Hello - What is the best way to get an arbitrary # of blank records at the start of report output? I am writing a report that will be printed out on label sheets -- some of which might already be used. For example, there might be 3 labels per page bu

  • Problem with Keymaps

    Hi, I got a problem with a user-defined keymap. Here is a fragment of my code: for (int i = 0; i <= 1; i++) { keymap[i] = textField.addKeymap("Bindings" + i, textField.getKeymap()); prepare_keymap(i); textField.setKeymap(keymap[actKeymap]); private s

  • Automatic scheduling of Cproject

    Hi All, We have changed the plan finish date of an item from 31.12.2011 to 31.12.2012. Corresponding Cproject project definition is in Released status. As a part of synchronization the dates on the Cproject project definition changes to 31.12.2012. B

  • Use of DSO Before Infocubes

    Hi Experts ,    Its a general practice that i have seen is alwways data is loaded from the source to DSO and then DSO to Infocubes. Why data is generally not loaded directly to infocube?? What are the advantages if we are first loading into DSO and t