Can't get in the internet (no problems with explorer) it says untitled and when I click on abokkmark it says loadind for about one splitsecond and back to untitled

I cannot open any site with firefox, but have no problems with explorer. on the tabbar ontop it says untitled and when I click on ant bookmarsite or click on a link in an email from outlook, the untitled will change into loading (for only one split second) and right back to untitled.

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

Similar Messages

I am in process of unlocking my iphone and need to restore my phone backed it up already but ituenes will not let me restore keeps telling me ituenes can not get on the internet no connection with is not true cause otherwise you would not have gotten this

I have contacted at&t and they did what was nessary to unlock my phone was told to backup my phone and did that so know I just need to restore my phone with ituens which ituenes will not let me do cause I get message can not connect to cause of no internet connection wich is not true cause other wise you would not have gotten this

Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards.

Just updated to the new beta 3 version, now I can't get on the internet at all, I am using my girlfriends computer to send this

just updated to the new beta 3 version, now I can't get on the internet at all, I am using my girlfriends computer to send this to you. Just gives me a blank tab and WILL NOT DO ANYTGHING!!!

Try to create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

My wi fi is connecting up fine on my ipod but i can't get onto the internet

My wi fi is connecting up fine on my ipod but i can't get onto the internet. My ipod has been working fine until now and i have tried re- setting the network settings and all the other options that have been given but nothing seems to make any difference. If i try to get onto internet at all on my ipod, for instance, facebook and safari it will just come up no internet connection, even when the bar is full at the top. Can anyone help ?

Despite the WiFi sign at the top you may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If this problem continues you should test your iPod on some other networks. Since you say your iPod was "working fine" either it or your router may have developed a hardware problem. If the iPod works OK on other networks your router may have a problem.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

I installed updates now I can't get on the internet, why?

I installed updates (itunes 10.5, Safari 5.1.1 and Security update 2011-006 1.0) now I can't get on the internet, Why???

Well if it doesn't see the network in the WiFi drop down... then we got problems. Move it closer to the router...

I can't get onto the Internet. Have tried everything

HP Pavilion Slimline Windows 7 64 bit 3GB Desktop 08861112106 Can't get onto the Internet. Have tried, Google, Yahoo, Frontier, nothing works. Hope someone can help me.

Hi,
How do you connect your machine to the Internet ? Wired or wireless ? Please try this:
1. Click Start, type cmd on the Search box then press enter,
2. Type ping www.google.com then press enter. Can you get something like this (ie 0% loss)
3. Type Exit then press enter
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPad can't get in the internet via a WPA2 Enterprise setup

I've seen some similar posts and no real answers. My Office just got set up with Wireless, it's cisco gear and using RADUIS to authenticate. What they told us to do on the windows boxes was this:
Connect to the SSID
use WPA2 Enterprise Authentication
TKIP Encryption
Use PEAP Authentication
Uncheck the "Validate Server Certificate"
Authentication Method is EAP-MSCHAP v2 on the PEAP properties screen
Following these instructions on Windows 7 I can get on the network.
I tried this on my iPad:
connected to the network
selected WPA2 Enterprise
It Prompted my for my login/password
I entered them....
Then I got a certificate and it asked me to accept/install it, and I did
Then it connects to the access point and gets a signal
Even though I am connected and authenticated I can't get on the internet, and I get no IP address. Not a DHCP issue since other devices work.
Any ideas on alternate configurations, or what I'd need to do with the iPhone Configuration Utility to get this working?

"Unsupported" device - I've heard that before, too many times... =)
So after thinking on everything you've tried, it's safe to say that your AP is running PEAPv0 with EAP-MSCHAPv2 for Authentication. This is good news - as it is probably the most widely used Enterprise WiFi configuration, iOS devices should absolutely be compatible with this. Getting a non-domain XP PC connected was a great idea, as I have discovered that Windows XP is kind of "loose" in the way it handles PEAP certificates - it will accept any certificate given to it by a RADIUS server without question. Undoubtedly a big security hole, but it does have the advantage of being "user friendly." I don't think Apple's implementation is quite as loose, so even though you are manually accepting one certificate, you probably need more to complete the chain of trust required for your device to authenticate the server. This is a requirement for PEAP to function.
So at this point, I think your best bet would be to migrate over to the Credentials tab. If you're running the iPhone Config Utility on a PC which connects to the AP, you already have the certificates in your trusted certificate store - so simply hit the add button and add any relevant certificates. For example, if your domain is named "corporate", import any certificates bearing that domain. Once you've done this, head over to the Trust tab under WiFi and check off your newly imported certificates as being trusted for your connection.
In addition, if you can figure out what the name of the RADIUS server on the other end of the AP is doing the authentication, add it under "Trusted Certificate Names" - if you don't know it, you can also add a wildcard like "*.corporate" to trust any servers in your domain. This shotgun approach is probably your best bet for making it go initially.
You will know this is all working when you no longer get the dialog on your iPad to accept the certificate, and hopefully, you get an IP address.
We're truly in the thick of it now, and this is my last idea - so if this does not work, we will need to call on those stronger than I with iOS networking... or, you can call up your IT department and start the conversation off with the words "I bet you can't figure this out" - that always gets IT people going =)
Best of luck!
Sources:
http://howto.techworld.com/mobile-wireless/3451/use-peap-for-wireless-authentica tion/
http://images.apple.com/ipad/business/pdf/iPadDeploymentScenarios.pdf

I can't get onto the internet. How do I reconfigure my Ipad?

I can't get onto the internet on my new Ipad. How can I reconfigure it. I have Motorola and when it asks for my p/w it won't let me get on.

I can't get onto the internet on my new Ipad. How can I reconfigure it. I have Motorola and when it asks for my p/w it won't let me get on.

HT4600 Airport Express light is solid green but I can not get on the internet. Any clues as to what is wrong?

Airport Exopress light is solid green, but I can not get on the internet. Does anyone have a suggestion how to fix this?

Would you please provide some more information about your current network so that we can help you? For example, is your AirPort Express the only router in your current network configuration? That is, is it connected directly to a broadband modem or to another router upstream of it? Regardless, what is the make & model of this modem?
When changing network equipment or when setting it up for the first time, it is always a good idea to perform a completer power recycle of your networking equipment. Please check out the following AirPort User Tip for the details.

I have a ipad 64GB Wifi 3G and i can not get onto the internet, i have set up wifi but it wont get on the net

i have a ipad 64GB Wifi 3G and i can not get onto the internet, i dont have a data plan yet & i have set up wifi but it wont conect to the internet

From your description above I conclude that the WiFi transmitter and receiver of your iPad appear to be working, but I abviously cannot tell how well they are working.
Have you reset your iPad already?
Press the Home and sleep/wake buttons simultaneously until only the white Apple logo appears on the screen - usually 10 to 15 seconds - ignore anything else.
Genius Bar: http://www.apple.com/retail/geniusbar/

Can't connect to the internet on a wireless system at school, but fine when I'm at home.

Can't connect to the internet on a wireless system at school, but fine when I'm at home. All semester, there was no problem getting on the wireless system at school. I had a problem, put in my school log-in and password and saved it in keychain. Since, that time I have been unable to connect to the wireless system at school. I delete this action out of "Keychain" and went to "Preferences" and deleted the "Keychain" action, but today at school I couldn't log in. Any suggestions would be appreciated. MacBook; OS 10.5.8

I think your best bet is to go to technical support at your school (hopefully you have one) and they will help you out. The only reason I can come up with as to why you are not getting wireless access is that your settings are wrong (need to turn airport on) or your computer is not registered into the university.
Good luck.

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I just bought a new computer and when i click on itunes it says i need to install ASL.dll, but i'm scared if i instal it or reinstall itunes i will lose all the music i've bought from itunes, what do i do?

HHHHHEEEEEEEEEELLLLLLLPPPPPPPPPPPP!!!!!!!!!!!!!!!!!!i just bought a new computer and when i click on itunes it says i need to install ASL.dll, but i'm scared if i do or re-install itunes i will lose all the music i have bought from itunes, what do i do?

Welcome to the Apple Support Communities
The music is stored on the iTunes library. This library isn't deleted when you uninstall or reinstall iTunes, so you will keep everything. Anyway, it's better to make a backup of the library. Apart from that, you can download the purchased music as many times as you want

HT202159 Pixlemator had less than a minute to finish downloading, then stopped. I go to the purchase page and it says install. When I click on install it says there was an error and tells me to go to purchase page.

Pixlemator had less than a minute to finish downloading, then stopped. I go to the purchase page and it says install. When I click on install it says there was an error and tells me to go to purchase page.

Try deleting the cache associated with the App Store.
Quit the App Store if it's open.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go then move the Cache.db file to the Trash.
Relaunch the App Store and try re downloading the app.
If that didn't help, open Sysem Preferences > Security & Privacy then select the General tab.
Select: Mac App Store and identified developers
If that area is greyed out, click the padlock icon to make changes. You may be prompted for your admin password.
Then try downloading the app.

Can't get in the internet (no problems with explorer) it says untitled and when I click on abokkmark it says loadind for about one splitsecond and back to untitled

Similar Messages

Maybe you are looking for