Can't get Macbook to recognise Samsung SE SO84

Hi to you all.
I apologise if this problem has been addressed a thousand times but I have had a good ferret about without success. My optical drive has failed on my macbook and I have purchased a Samsung SE SO84 but can't get the computer to recognise it at all.
I can put a CD or DVD into it and the green light flickers and the disc spins but I then cannot do anything. Does anyone have any idea who to correct this problem as I am trying to get my daughters homework on a CD!
Many thanks
Nick

Hmmm, posted too quickly. Sorry. Just ran a search on this. Going to try other suggestions first.

Similar Messages

  • Can't get macbook past spinning ball at start up.PLEASE HELP

    "Can't get Macbook past spinning ball at startup. PLEASE HELP"
    Older mac book with (??  10.5....  ??) Froze up. Force Quit "Kindle", "Sketch up" and "Safari". Have tried to use safe boot but after 5 min. of holding shift key the SBOD (Spinning Beachball Of Death) was still spinning away. Tried to load Mountain lion by means of disc---Didnt have original disc for this macbook; inherited it from deceased family member 2 yrs ago--- but couldn't get past SBOD there either. I am willing to erase all on mac book in order to get it up and running again since all my vital files are in my Mac (desktop) and primary use of macbook tends to be internet use.

    You could try installing Snow Leopard on the Macbook. Installation DVD is available from Apple:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Are you sure the MB meets the requirements for Mountain Lion?
    http://support.apple.com/kb/ht5444

  • IPhone **** cannot be used because it requires iTunes version 10.6.3 or later - I get this error message yet I have 10.6.4, how can I get itunes to recognise my phone?

    The iPhone **** cannot be used because it requires iTunes version 10.6.3 or later - I get this error message yet I have 10.6.4, how can I get itunes to recognise my phone

    You must be referring to OS X 10.6.4, because there is no iTunes version 10.6.4. You can download iTunes 10.6.3 here:
    http://support.apple.com/kb/DL1575
    Any reason why you have not updated to OS X 10.6.8? If you did, you could then run iTunes 11.0.1.

  • How can i get macbook pro to recognize my samsung fascinate to transfer music?

    I want to transfer the music already on my samsung fascinate phone onto my new macbook pro using the usb mass storage device option.  when i plug the phone into the usb port the computer recognizes that its there, but i am unable to do anything with it.  shouldnt i be able to open the files on the phone and transfer them to the computer?  any help would be great so i can get my music back

    Contact Samsung's tech support and/or read its user manual. 

  • Can't get MacBook to "see" Airport Extreme

    Last week I bought an Airport Extreme to enable me to direct stream NetFlix on my new Samsung DVD player. To save my life I cannot get my MacBook to recognize the Extreme. I've tried Airport Utility with no luck. I go back to Express and everything is hunky-dory. Oh, one time, I almost got it to accept both Express and Extreme but it kept asking Express for a password. I have never put a password on Express. I feel something as plain as the nose on my face is there but can't get it to work. Also, I am using a Comcast modem. Thanks for any help!

    Hmmm, posted too quickly. Sorry. Just ran a search on this. Going to try other suggestions first.

  • Can't get macbook to boot up

    I can't get my MacBook to boot up, Come on and wheel spins. Screen turn  light blue, then dark blue with curser and just keep repeating that pattern.

    Can't help much until you tell us what version of OS X you are using and on what particular Mac model.

  • Can't get iTunes to recognise my iPhone 5S on iMac

    Since I upgraded to Yosemite on my iMac and OS 8.1 on my iPhone 5S, I can't get my iPhone to connect through iTunes using my iMac.  It just comes up with a message saying that iTunes can't connect to this device.  Also every time I connect my iPhone, iPhoto springs into life, asks to import photos from my iPhone 5S but then freezes on "loading...." and nothing else happens.
    I have successfully managed to connect my iPhone to my MacBook Pro since all the upgrades, so this seems to be an iMac specific issue.
    Pity 'cos otherwise it was all going so well........

    Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
    Mac: http://support.apple.com/kb/ts1591

  • IPad mini for Xmas.  Can't get it to recognise or connect to my home network. I'm using a BT Home Hub set up in Jan 2012.  Any suggestions?

    Got an IPad mini for Xmas.  My home network runs off a BT Home Hub.  I can't get the iPad to recognise or connect to the wifi network despite a strong signal. The device recognises the presence of a BT Network but keeps asking lots of nonsene stuff - like IP address etc etc which it ought to be able to pick up automatically.  The BT Network was set up in Janiary 2012.  Any suggestions?

    hello again,
    i didn't really dare to delete the blue home folders before, just in case everything went wrong, but now i think i have so little space that i can't afford to lose 2.25gb!
    one thing that slightly worries me is the fact that the 'proper' library folder (in the home icon) is 2.09gb, whereas the 'wrong' one (from the blue folder forenamesurname) is 2.24gb - this is the one i would be deleting. just seems odd to delete a larger file than the one i presume i'm using.
    "Move everything you want to keep out of the blue folders, and then place both of the folders on your desktop. If everything works properly after a few days, delete both folders. If you are asked for your administrator password at any point or if either folder is copied instead of moved when dragged, don't delete that folder."
    by 'everything you want to keep', does this include the library folder? 'cause there doesn't seem to be much else, and i'm not sure if deleting the library folder would ruin all my preferences.
    i've put both of the folders on the desktop, it didn't ask for the admin password or try to copy them, so i guess that's good news. what kind of things should i be looking out for to act differently?
    are the folders not in use now that they are on the desktop?
    also if i put them in the trash will they have no effect? i.e. the same as permanently deleting them, so i could put them in the trash as a test.
    cheers, stephen.

  • Can't get macbook working

    emptied my files onto external hd erased os mavericks, commenced installing mountain lion 10.7 as there wasn't a mavericks option and now it didn't complete and I can't get my macbook goin (scream) can anyone help me pleeeese?

    Assuming the original OSX was LION (10.7) start the MBP with the COMMAND+OPTION+R keys down.  The display should show a revolving globe.  Follow the instructions.  It will connect you to the Apple servers and install the original OSX on your MBP. 
    Make certain that you have a solid Internet connection.
    Ciao.

  • Can not get  MacBook Pro 10.7.2 connected to Panasonic LCD projector to work

    Any suggestions on how to get MacBook Pro 10.7.2 working with a LCD Panasonic Projector Model # PT-LB10NTU?

    Thanks for the replys.
    After spending an hour plus, uninstalling and reinstalling drivers and still not able to print, my husband, sits down, plugs in an ethernet cable, reinstalls the printer with the ip, and it prints. !!! I'd already done that , but that was before I deleted the preferences and installed the Gutenprint driver. I think it was the new Gutenprint driver that did it.

  • How can I get iTunes to recognise 2 different iPads?

    Just bought a new iPad2 but when I connect to iTunes, it thinks it's another iPad we have in the family (we share the usic library). How can I get iTunes to realise it's a different device?

    That is one of the most bizarre things that I have seen reported, but nothing is impossible.
    Quit iTunes, restart your computer, reboot your iPad and then connect it again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HELP I can't get macbook air to boot!!

    Help!! I am traveling around the world right now and I can't get my MBA to boot up.  I shut it down by selecting shut down, after closing all windows.  A few hours later went to turn it on and nothing!  I am so frustrated! When I press the start button I get the chime, but the screen doesn't light up.   I can feel something whirring, and the logo on the back lights up but that is it.  I have tried repeatedly starting it and turning it off, nothing. Have tried holding the alt button and the start button at the same time, nothing.
    I am getting on a plane in the morning and going to Nicaragua so I can't call Apple nor can I go to a service center.  Right now it is 7:45 PM in Santo Domingo, Dominican Republic and the computer service centers are closed.
    I purchased the MBA in January of 2014 so it is less than 1 year old.  I purchased extended warranty recently.  I have the latest OS system installed, I have no USB sticks to start from.  All I have is the MBA.  Slapping it doesn't help Neither does yelling at it .  Any suggestions as to what I can do? This is the first time this has happened. I haven't dropped the computer.
    Thanks so much!

    The easiest thing to do is to reset the SMC:
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light may cycle off / on once.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.

  • I have had to change my email address/Apple ID. my iPad recognisIes the change of id but on my MacBook Air, iCloud just keeps asking me for a password for the old email address/account. How can I get iCloud to recognise the new details? Help please!

    I have had to change my email address/Apple ID. My iPad recognises the new detail in iTunes and iCloud but when I go into iCloud through my MacBook Air, it requests a password for the old email account which I can no longer use. There is no Option to be able to change this email/ID detail as I cannot get further than the password request. Can anyone help please - this is driving me insane?!

    Go to System Preferences and click Sign Out, select Delete at all the prompts, then sign back in with the changed ID?   (Your iCloud data will disappear from your Mac when you sign out and choose Delete, but will still be in iCloud.  Provided you are signing back into the same account your data will reappear on your Mac when you sign back in.)

  • Can't connect macbook pro to samsung ue46d8005?

    Hi,
    I just received my new Macbook Pro 13" since my old MBP from 2010 was stolen.
    I'm trying to connect it with my new led-tv Samsung ue46d8005.
    I have a mini-display to hdmi adapter and from there a hdmi cable hooked up to the tv. But no matter how I do the tv or the MBP doesn't recognize each other. I have scrolled through the entire internet for a solution and tried several tips from people.
    The adapter and hdmi cable worked just fine with my old MBP and panasonic tv so there's nothing wrong with it.
    I've tried all the four different HDMI inputs.
    I've tried to rename the "label" of the HDMI to PC/DVI.
    I've tried to shut down the tv and MBP, and then start them up at the same time.
    But there's no luck with anything!
    What I've learned from googling around is that Samsung and Macs seem to have problem connecting with each other.
    Today I took my computer and the adapter to my friend's house. There we connected it to his Sharp lcd and it worked just fine! But it just won't work with my samsung tv!
    But please, is there anyone out there who can help me?
    / Ted

    The mirror setting appears in the 'Arrangement' tab in the Displays preference pane once the two devices are communicating, so the Samsung support person was not being particularly helpful.  Besides, I would recommend against using mirroring as it forces the TV to operate at the resolution of the MBP and not at it's native resolution thereby compromising image quality.  Extended desktop mode with an external display ensures that the TV will use its full native resolution of 1080p (or 1920x1080) and also gives you the flexibility of having two screens with different applications visible on each.
    Interesting that you've found that it doesn't work with a second Samsung TV!  I guess that means suspicion now falls on the MBP.  Like I said earlier, I'm not aware of any incompatibility and mine worked first time!!!  I'm busy at the mo' but I'll have a bit of an investigation later and see if I can turn anything up and get back to you.
    By the way, did you try resetting the PRAM and the SMC?  It's especially worth a try now that suspicion lies with the MBP.
    http://support.apple.com/kb/HT1379?viewlocale=en_US&locale=en_US
    http://support.apple.com/kb/HT3964

  • Can't Get MacBook Pro and Mac Pro to Network

    I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
    Thanks in advance for any ideas you might have on  how to fix this.

    I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

Maybe you are looking for

  • Starting Reader problem (edited by host)

    Shortly after opening Adobe reader a window pops up and says, "were sorry Adobe reader has encountered a problem and needs to close".  What can I do to fix this problem??

  • ITunes 64 will not install: says needs Quicktime, which *is* installed

    This is what I've done: Deleted temp directory Restarted Uninstalled iTunes and Quicktime, through Windows Add/Remove programs Deleted temp dir Restarted Installed Quicktime (from QuickTimeInstaller.exe,  v7.69.80.9) Deleted temp dir Restarted Ran iT

  • PDF won't open in iBooks after latest software update

    I have a large pdf file (biology textbook) that I would read on my iPad. It worked flawlessly until the latest software update (4.3.1). Now I can only see the first page and it only shows page 1 of 1, even though it is taking up all 450MB of space. I

  • Crystal Reports 10 - SQL Server

    Hi We have Crystal Reports 10 currently in our organization and we want to know if it is compatible with SQL Server 2005 or SQL Server 2008? Does anybody have any idea on this? Any help as in white paper, links etc is appreciated. Thanks.

  • Downloading photos from ipad

    my photos appear as ithumb files not as microsoft pictures? is this right?