Can't get my printer to work with new OSX 10,6?
I upgraded to snow leopard 10.6.3 so I could use the new Touch 4th generation. Everything was great until I tried to use my epson R2880! I keep getting
errors. It also says the printer is not registered. I have downloaded software updates, font updates, etc. no luck? Any ideas? thanks
Since you mention doing an upgrade I would be inclined to reset the printing system and then add the R2880 queue again.
Open System Preferences > Print & Fax
Move your mouse over the Printers list
Hold down the Control button and click the mouse
Click the "Reset printing system ..." popup
Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.
Similar Messages
-
Can't get 4050n printer to work with new Desktop Computer: running XP
I have a new Desktop Computer, dual processor, which is running XP and MS office 2007. I had my 4050N HP Laserwriter hooked up to my old desktop (which failed in the last two weeks, blown capacitor, etc) and it worked fine with XP on that computer.
So I downloaded the drivers I found for HP 4050N running XP, and can't even get a test page. The connectors seem to be ok. I had to buy a parallel port to USB cable and I have that plugged into the USB port at the back of my new desktop.
Any ideas of what else I should try? If I had a computer virus with the old machine, could it have affected my printer somehow?
I'm at a loss.
Thanks!Since you mention doing an upgrade I would be inclined to reset the printing system and then add the R2880 queue again.
Open System Preferences > Print & Fax
Move your mouse over the Printers list
Hold down the Control button and click the mouse
Click the "Reset printing system ..." popup
Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again. -
Can't get out.print to work with XML jsp tags
<jsp:scriptlet>
if(ErrorTrap == true) {
out.println("<tr><td colspan=\"center\" align=\"center\">There was" an error while processing the form</td></tr>");
ErrorTrap = false;
</jsp:scriptlet>
I can't get this script to work with the XML stype jsp tags. It keeps telling me the <jsp> tags are untermintaed. Is there a special trick to fix this or do I have to use the non-XML type tags?Sorry, I didn't mean to put the extra " in the out.println text string. :-/
-
Can't get old scanner to work with new iMAC
I have an old scanner, Epson Perfection 4870 Photo that I can't get my new iMAC to install in PSE6 like I've had in my older computers. I've installed all the software (plus I used my old laptop to transfer files/information when I initially started the new iMAC. When I go into PSE6 it is not under the import area that it used to be. Do I need to go manually drag the file in the hard drive to another folder? Thank you.
Most likely the problem is with the driver. I have the same scanner at work and this is what I had to do to get it to work. Because you are running PSE6 which is a Universal Application on an Intel Mac, in order for the plugin to load within PSE it must also be a Universal plugin which it's not. Epson claims these drivers that were released in 2006 are Intel and 10.5 compatible. What you have to do to get it to work is Open up Epson Scan Utility in order to scan because the Scan Utility will run as a PPC Application. You can call Epson to confirm but if they try and tell you how to run PSE in Rosetta that is not a good solution.
George -
Can't get airport express to work with new wireless router
I just swapped out a linksys wrt54gl for a linksys E1200 wireless router on my home network. My PCs and iPads, and TV all made the switch to the new network fine, but the airport express isn't working. All I want to use it for is to transfer iPad audio to my home speakers. but my iPad AirPlay shows the old Airport as an option, I can switch to the Airport, no sound comes out the home speakers, then the iPad reverts AirPlay back to iPad. This model Airport just has power, USB, and LANA ports, so it doesn't seem like it would be complicated. A CAT 5 cable goes from the airport WAN port to one of the ports on the back of the new wireless router. What did I overlook?
I thought I'd jump in here with you network experts for some help with a related networking problem.
Equipment: iMac 24-inch, Early 2009 2.93 GHz Intel Core 2 Duo; 2 MBP w/Retina Display; AirPort Express version 7.6.4 (Conncected Using: DHCP; Router Mode: DHCP and NAT); Comcast/Xfinity Gateway 1 Modem w/2.4 GHz WiFi.
#1. Comcast forced me to change modems to their Gateway 1 saying mine was at “End of Life.” Previously, my home network was set up with AP Express and worked fine using my iMac as a server. After installing the Gateway 1, I could not get my network to work after repeated calls to their support, online chats, trial and error, reading community chats and articles, etc. I put the Comcast modem in passive mode using the “Bridge” setting and re-established my network with my AP. I’m using my iMac as a server for file sharing with my two MBP’s. The network isn’t recognized in sleep mode and will not wake from sleep and I can’t find it or Connect to Server when the computer is asleep. I’ve tried all combinations within the Energy Saver/Screen Saver/Security preferences. I’ve reset the SMC and other like resetting to factory defaults. How can I fix this and what are the correct settings for my home network to function again with my AP Express?
#2. TimeMachine stops doing backups when the computer is in sleep mode, understandably because I’m not making any changes on the iMac that need to be backed up. But using my laptops on the network, I am making changes in shared files that are hosted on the iMac that I would like backed up. I cannot get the schedule feature to work to wake up the computer long enough to do a backup nightly because, as a security feature, I log out after 30 minutes of inactivity. I understand the schedule doesn’t work unless you’re logged in. Is there a way for me to make this work?
Thanks! -
Can't get my printer to work with Airport Express
I got a new MacBook today, everything is up and running, so is my Airport express with my DSL line, but my printer is not responding to the connection. I plugged in the USB port from the printer to the Airport and the printer and it doesn't work. I restarted things, went to troubleshooting... nothing helped. It's not the printer because if I plug in the printer USB port directly to my MacBook it works. Anyone have any advice? Thank you!
The directiions on your site are for the Printer Setup Utility that was part of OS X 10.3 Panther. There is no optoin for "IP Printing" in the Tiger Printer Setup Utility, so I don't get how everyone was able to follow the intructions successfully. I sure can't. Is it enough to just add the printer normally using the default browser (as a Bonjour printer) and selecting the aformentioned GIMP driver manually? If not, I need help getting instructions that pertain to Tiger IP Printing. Thanks.
Use the process outlined here:
HP Printers (and others) not on compatibility list
and Airport Extreme Printing
http://www.ifelix.co.uk/tech/1300.html
Using the G
imp-Print drivers for the PhotoSmart P1100.
Relevant Thread
http://discussions.apple.com/message.jspa?messageID=26
14748#2614748
MacBook Mac OS X (10.4.7) HP PhotoSmart c3180. WDS w/ AirPort Express & Extreme
2.0 GHz MacBook Mac OS X (10.4.7) HP PhotoSmart c3180. WDS w/ AirPort Express & Extreme -
I can not get my printer to work with my new macbook pro. Help?
I have a printer from Dell that my macbook has recognized and it act as though it is printing but nothing is happening. The computer acts like it sends the doc to the printer but my printer is not doing anything. Any suggestions?
Check the Dell website for compatible printer drivers you can download and install.
Once the drivers are installed, open System Preferences > Print & Scan > Print
Then click + to add the printer.
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information. -
Can't get Epson NX510 to work with new iMac
I am new to Mac, and I apologize if this is the wrong forum to this question, but...
Apple threw in an NX510 scanner/printer/copy/fax when I bought my new iMac a couple of months ago. Printer/copy functions works great. But I cannot get the scanner function to work.
Can anyone help me figure this out? Thanks in advance.Try this from the Epson FAQs
http://www.epson.com/cgi-bin/Store/support/supAdvice.jsp?BV_UseBVCookie=yes&type =highlights¬eoid=142167#can%27t%20scan
For Drivers
http://www.epson.com/cgi-bin/Store/support/SupportSnowLeopard.jsp?BV_UseBVCookie =yes
Message was edited by: WZZZ -
Can't get secure wlan to work with new guest wlan
Dear Support,
I'm having a nightmare! where I can seem to get either one wlan to work or the other but not both together.
I posted previously and reconfigured as per the suggestion, however the problem I get is that the secure wlan client associates, then de-associates after roughly 30 seconds with both a guest (no security) and secure (eap using ms ias as radius server)
my previous post is;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Security%20and%20Network%20Management&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddcfe12
and the log shows the following, obviously the client is set to connect automatically.
*Mar 1 00:04:35.105: %DOT11-6-ASSOC: Interface Dot11Radio0, Station AP-CDC#2 00
13.cefd.48ca Associated KEY_MGMT[NONE]
*Mar 1 00:04:51.391: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 000e.35f8
.5d13 Associated KEY_MGMT[NONE]
*Mar 1 00:04:51.506: %DOT11-4-MAXRETRIES: Packet to client 000e.35f8.5d13 reach
ed max retries, removing the client
*Mar 1 00:04:51.506: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station 000e.35f8.5d13 Reason: Previous authentication no longer valid
*Mar 1 00:05:15.176: %DOT11-6-ASSOC: Interface Dot11Radio0, Station AP-CDC#2 00
13.cefd.48ca Associated KEY_MGMT[NONE]
*Mar 1 00:05:32.703: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station 0013.cefd.48ca Reason: Sending station has left the BSS
*Mar 1 00:05:58.780: %DOT11-6-ASSOC: Interface Dot11Radio0, Station AP-CDC#2 00
13.cefd.48ca Associated KEY_MGMT[NONE]
*Mar 1 00:06:16.141: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station 0013.cefd.48ca Reason: Sending station has left the BSS
*Mar 1 00:06:40.759: %DOT11-6-ASSOC: Interface Dot11Radio0, Station AP-CDC#2 00
13.cefd.48ca Associated KEY_MGMT[NONE]
*Mar 1 00:06:58.145: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station 0013.cefd.48ca Reason: Sending station has left the BSS
*Mar 1 00:07:00.560: %DOT11-6-ASSOC: Interface Dot11Radio0, Station AP-CDC#2 00
13.cefd.48ca Associated KEY_MGMT[NONE]
*Mar 1 00:07:18.020: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station 0013.cefd.48ca Reason: Sending station has left the BSS
*Mar 1 00:07:43.902: %DOT11-6-ASSOC: Interface Dot11Radio0, Station AP-CDC#2 00
13.cefd.48ca Associated KEY_MGMT[NONE]
*Mar 1 00:08:01.254: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station 0013.cefd.48ca Reason: Sending station has left the BSS
*Mar 1 00:08:16.172: %DOT11-6-ASSOC: Interface Dot11Radio0, Station AP-CDC#2 00
13.cefd.48ca Associated KEY_MGMT[NONE]
*Mar 1 00:08:16.737: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station 0013.cefd.48ca Reason: Sending station has left the BSS
*Mar 1 00:08:37.397: %DOT11-6-ASSOC: Interface Dot11Radio0, Station AP-CDC#2 00
13.cefd.48ca Associated KEY_MGMT[NONE]
*Mar 1 00:08:54.732: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
Station 0013.cefd.48ca Reason: Sending station has left the BSS
*Mar 1 00:08:57.193: %DOT11-4-MAXRETRIES: Packet to client 0013.cefd.48ca reach
ed max retries, removing the client
Thanks in advance for your assistance.
Any prompt reply will be greatfully received. I also rate responses.
Thanks again, regards, AdrianHi Ben,
Please find attached AP config, I can access the switch at the moment, but the config is fairly basic, trunk port with two vlans and vlan 1 as the native.
here's the ap config.
AP-CDC#2#sh startup-config
Using 2989 out of 32768 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname AP-CDC#2
enable secret 5 $1$LQ1O$NKYZoYAeiahKw0805kLHg0
clock timezone GMT 0
clock summer-time BST recurring last Sun Mar 1:00 last Sun Oct 1:00
ip subnet-zero
ip domain name wlan.internal
aaa new-model
aaa group server radius rad_eap
server 10.10.10.2 auth-port 1645 acct-port 1646
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 vlan-name dmz vlan 2
dot11 ssid Secure
vlan 1
authentication open eap eap_methods
authentication network-eap eap_methods
dot11 ssid Guest
vlan 2
authentication open
guest-mode
username Cisco password 7 062506324F41
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode wep mandatory
ssid Secure
ssid Guest
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
no preamble-short
channel 2412
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
hold-queue 160 in
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
no bridge-group 2 source-learning
bridge-group 2 spanning-disabled
interface BVI1
ip address 10.10.10.49 255.255.255.0
no ip route-cache
ip default-gateway 10.10.10.253
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server host 10.10.10.2 auth-port 1645 acct-port 1646 key 7 xyz
radius-server vsa send accounting
control-plane
bridge 1 route ip
line con 0
line vty 0 4
end
AP-CDC#2#
Thanks again, regards, Adrian -
Old Apple ID disabled been hacked. Can't get iCloud email to work with new ID
old Apple ID disabled
please helpHey there Tamsin,
If I understand correctly your Apple ID has been compromised. I recommend you reach out to our Account Security team immediately for additional assistance. Please note that you will be asked to verify your account information.
Apple ID: Contacting Apple for help with Apple ID account security
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Is there a way I get can my Dell V305 printer to work with my Mac?
I "inherited" my son's Mac Book Pro but when I tried to hook it up to our printer, Dell V305, it wouldn't work. I tried downloading the software from the Dell site, since we don't have the disks, but it wouldn't work. Is there a way I can get our printer to work with the Mac?
I would start by contacting Dell's tech support to determine if the printer is compatible. They may then be able to suggest what printer driver to use on the Mac.
-
How can I get my iMac to work with scanners?
How can I get my iMac to work with scanners? The scanners scan just fine, but not to my iMac. I've tried Epson and HP all-in-ones; it makes no diffference. I'm becoming extremely displeased, but don't know at whom I should be displeased, the printer guys or Apple. Help?
My Epson is able to do scans using Image Capture without any problems at all.
Allan -
I can't get airport extreme to work with iPad
I can't get airport extreme to work with iPad
Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour. -
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
How can I get my ipod to work with itunes?
When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>
Maybe you are looking for
-
Count is too slow?Any alternatives?
Query is taking forever.The data is against 11 million records.And encountered an error about metadata entry. Any idea? Message was edited by: JAUS
-
I want to change from store USA to store netherlands
I changed from store Netherlands to store USA. But is impossible to return to store Netherlands
-
Why doesn't the "remove from server when deleted from I.nbox" not do it on my Verizon server?
-
Are KEXTs and multitasking architecturally supported in iPhone OS?
Hi Is multitaksing / background execution and support fro KEXTs(NKEs) something which is actually possible in iPhone OS, its just that its not exposed outside of apple (unlike OS X)? Or support for these features just architecturally isn't there (in
-
Connection Error iCloud encountered error while trying to connect to server
I changed my Apple ID. ( App Store and ITunes works fine ) I still have old Apple ID on Mac and Iphone ( ICloud works fine for ICal and Address book sync ). Will changing my Apple ID to new ID on Mac and Iphone fix ICloud error ?