Can't get outbound or inbound e-mail to work

My concern is 2013 not 2010. I have installed Exchange Server 2013 with no problems. I can serve e-mail to my internal organization, no problems.
However, the lab now wants to be able to send e-mail to the "outside" and receive e-mail from the "outside". I have gone through all the steps I can find on connecting a Send Connector, but while the e-mail acts like it's being
sent, it never arrives.
Is there anyone that can work through with me on what I might have done wrong or right so I can send to the "outside" world?

Hi ,
1.Please do the message tracking for the messages which you have send to the outside world.
2.Just check is there any messages held up On the queue viewer in exchange 2013.
3.make sure all the required exchange services are up and running.
test-servicehealth | ft -au
4.make sure all the required server components are active in the exchange 2013 server.
Get-ServerComponentState –Identity "server name"
5.make sure you are having an enough space on the disk drive where the exchange transport queue database resides.
6.Just enable the protocol logging on the send connector and check the logs.
7.You would have use either smart host or your exchange server to directly communicate with the mail servers in internet .So please make sure the name resolution part is working fine.
8.Most importantly you need to check the send connector configurations and reach ability to the smart host if you have on your network.
Please feel free to reply me if you have any queries.
Thanks & Regards S.Nithyanandham

Similar Messages

Can't get my PHP test e-mail to work

Hi,
I am trying to set up a form for my website, I am going through http://www.mindpalette.com/scripts/index.php#NMAnchor to help me, I want a Thank's page sent back to the use with the form info sent to my e-mail. The above download instructions gives me a test PHP page (Have placed in my Local root folder and found on by browser) The test page asks me to type my e-mail address in and send. But I cant retreive the e-mail. I have upgraded my IP web pagage so It accepts scripting. But still no luck. Have also tired sending to other e-mail addresses. Tells me there may be a problems with my out going mail account. All my accounts run from Mac mail.
Not sure where to go from here.

LouisaBoyles wrote:
Ok, so not sure is right, will explain what I have done.
Placed the php_mail_test.php in the same root folder as my holding page (which is still connected). Created a new site with the local root as same as my index.html holding page, remote info as same also.
And connected to my remote server.
But when I type www.denotestationery.com/php_mail_test.php in the browser URL it tells me its not found. Do I need to remove my holding page altogether and replace it with the php file? Or is it not found because I have to give it time to show up?
I have taken and attached a snap shot of my dreamweaver PHP test page with browser page behind to show you what's going on.
If you see in the files palette, the PHP page is not on the list. Only the index.html
I created a new site for the php under the name of e-mail.
Not sure what process form is. I have just designed my own form in Dreamweaver. Do I need process form?
If you type www.denotestationery.com/index.html into the browser you get your home page right?
If you type www.denotestationery.com/php_mail_test.php into the browser AND have uploaded the file to the same place as where the index.html file is it should appear in the browser, yes/no?
There is no need to create a new site or anything like that.
Have you actually established that php is running on the server yet by doing a page test?
processForm is the mail progam you downloaded from Mind Palette which you will use to configure the form you have created should you ever get past base camp
Hummm just could be 1-2-3 reg....not sure how they set their servers up

Can I get Apple Store's e-mail address for customers?

Can I get Apple Store's e-mail address for customers? My ipad mini with Retina has been delivered to wrong address.

I do not believe that Apple stores have email addresses - if you are referring to the online store, you can contact them via this link:
http://store.apple.com/us/help/contact
(this is for the US store as you do not have any info listed)

Can I get a Read Receipt with Mail, like in Outlook?

Can I get a Read Receipt with Mail, like in Outlook?
W.W.

It is possible, though not through the GUI. And as Dave points out, asking for a receipt does not mean that you will get one. The magic incantations for requesting receipts are detailed, amongst other places, in this article. It requires using the Terminal, and once set affects all messages you send until you unset it again.
If you search this forum for read receipts (the topic surfaces frequently) you should find a helpful Applescript for turning them on and off, to save using the terminal.
AK

HT1694 My hotmail is showing that I have 32 new emails and I do not have any. Can't get the 32 off the mail icon on the home page. Any suggestions?

My hotmail is showing that I have 32 new emails and I do not have any. Can't get the 32 off the mail icon on the home page. Any suggestions?

I have tried that also, but its still doing the same thing

HT201320 when my phone goes and gets my mail, can i get it to remove the mail from the server.

when my phone goes and gets my mail, can i get it to remove the mail from the server.

Only if it's a POP3 server. IMAP and Exchange synchronize the server and all clients.

Can you get "read receipts" on e mails

Can you get "read receipts" on e mails?

No, which can be prevented by default with the recipient's email client that supports this or by individual message when requested by the sender of a message.

Can I get my HP F4500 wireless printer to work with my Ipad?

Can I get my HP F4500 Wireless Printer to work with my Ipad....It is an IOS 4.3.2

Philip-
I don't see a 4500 HP printer on the list of AirPrint printers, so you will most likely need an alternate way to print to it.
One way is to use an iPad App such as Print n Share. It has its own browser, mail, photo and text programs that can print to some non-AirPrint printers. I don't know if it can print from within other iPad Apps.
Another way is to use a computer to share the printer as AirPrint over WiFi, using a program like Printopia for the Macintosh. For a free solution, search the web for AirPrint Activator.
I recommend you try the free iPad App, HP iPrint Photo.
Fred

How can I get my HP Officejet Pro 8100 to work. I had HP on the phone for over two hours and thought it was fixed. Now it just will not print at all.

How can I get my HP Officejet Pro 8100 to work.
I'm using an iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

Greetings paulr.paulr,
Welcome to the Apple Support Communities!
I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know.
OS X Yosemite: Printing troubleshooting
Cheers,
Joe

I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!

I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!!!

You have posted to the iTunes Match forum, which your question does not seem to be related to. Is your question concerning iTunes Match or syncing with iTunes via USB?

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

I can not get the flash player plug in to work with Internet Explorer

I can not get the flash player plug in to work with Internet Explorer

Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Can't get outbound or inbound e-mail to work

Similar Messages

Maybe you are looking for