Can't Get Parallels to work? Click here for the answer.
1. Install Parallels
2. Eject BootCamp ( right click on bootcamp an select eject)
3. Click on file select new, select BootCamp as the Operating System Detection source
4. Click continue and enjoy
Do you have the right permissions set?
Again, I'd check the logs. If there is a permissions problem it will show up in the authorization log.
Last edited by rooloo (2008-08-02 03:50:24)
Similar Messages
-
I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.
Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12 -
How can I get a list of active savepoints for the current session?
Hi,
In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
"Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"
So how can I get a list of active savepoints for the current session?
Could you please also let me know if there is any better way to debug this issue.
Appreciate any quick response as the issue is very critical.
Thanks,
Somauser776523 wrote:
Hi,
In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
"Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"It sounds like there's an execution path in the code where the SAVEPOINT is never issued.
There is no way to get a list of active savepoints. Is this your code or a "canned" procedure? If it is your code you can go through the code looking for answers, possibly tracing execution using DBMS_OUTPUT.PUT_LINE or writing messages to a log table. If its a "canned" procedure you may need to open an SR with Oracle -
Can we get a output in different languages for the same configuration
Hi All,
Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
language.
Thanks in Advance.
RajeshA Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
To maintain the translations:
Go to transaction SE63 in R/3.
Go to menu Translation->R/3 Enterprise->Other Long Texts
Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
Madhavi -
Can't get ch2 to work with tktds1k2k for Tek TDS 1002.
Why won't the tktds1k2k "Getting Started vi" display ch2? I modified it so that the Vertical.vi gets the same channel source as the "Read wvfrm to array vi". I am using a tds1002. When I set the source to ch2, the Read waveform to array vi times out. It works fine with source set to ch 1. I am using LabView 6.1 and GPIB-USB-B.
Hey Ed,
Looking at the code for the Getting Started vi it doesn't look like you should change any code for the example to work for channel 2. All you have to do is change the control on the front panel when you open the example from Channel 1 to Channel 2. The Source should look like the screen shot.
If the application doesn't work after making this change then I suggest you redownload the instrument driver incase some of the source files were modified or damaged.
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/20152aede3a9e06786256bfe005ff2df?OpenDocument
I hope this helps out.
JoshuaP
National Instruments
Attachments:
panel.bmp 1040 KB -
Where can i get a 45 Degree angle adapter for the laptop end of the G6 power supply.
I am annoyed by the power cord sticking out at 90 Deg from the right side of my G6 Notebook . the plug obstructs the usb mouse and i am looking for a 45 Degree adapter to solve this problem.
If HP make one of these then where / what site can i get it from .
If HP do not make this type of adapter than can anyone let me know if they have seen a website so i can buy one.What is the exact model of the notebook?
I am not certain about a 45 degree adapater, but most adapters are either straight or 90 degrees.
Here is a list of various adapters.
Even though the adapter you have may be at a 90 degree angle, it should be able to rotate to where the cord is not blocking any necessary ports.
Let me know the exact model and product number so I can give something that is a little more specific.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Possibly a very basic question but I am going nowhere without a solution. I have set up a spreadsheet in Numbers but it won't give me sums for chosen columns. I have viewed the run through videos and used the formula but nothing happens apart from giving a figure of zero or a red arrow. The sum icon in the bottom left hand section of the window does not highlight or show any total as I understand from the video that you can drag whatever total is here onto the relevent position on your spreadsheet. I have Numbers 09 version 2.3 (554). Can anyone advise. Thanks.
Hi Sohojools,
To sum a column, use a formula such as this one in Cell A6
Type this in a cell below your data:
=SUM(A2:A4) or whatever range of cells you want to sum. The easy way is to type:
=SUM(
and then drag or shift-click to select the range of cells. Close the formula with a final bracket ")".
The sum icon in the bottom left hand section of the window does not highlight or show any total
To see the sum (and other simple statistics) in the bottom left, select a range of cells. That tells Numbers which cells you are refering to.
The videos are good, but the Numbers'09 User guide, and the Formulas and Functions User Guide are better. Download them from the Help Menu in Numbers.
Regards,
Ian. -
How can I get BCC to present timestamps localized for the user
I work on an ATG deployment has Internal users accessing a server located in Washington from all over the world. The users want to see all timestamps presented in their timezone (10/18/2011 09:30 Pacific Daylight Time is 10/19/2011 12:30 China Standard Time) not the timezone of the server. How can I get this effect in the BCC?
BobI do not see that form in the page source, so it looks that it the login form gets created via JavaScript and the Firefox Password Manager doesn't work in such cases. Form fill may store the name.
-
How can I get GRC V5.3 Users Guide for the four modules
Hi,
Does anyone know how I can get hold of GRC V5.0 User Guide(s) for Risk Analysis and Remediation, Compliant User Provisioning, Enterprise Role Management, and Superuser Privilege Management? So far I can only get Installation Guide, Configuration Guide, Upgrade Guide, etc. from the SAP Ramp-up website; but not the function modules. Is there a user guide for the four modules?
Also can anyone tell me about their experience with GRC V5.3 ramp-up? Good or bad, what to watch out, etc. Any information will be appreciated.
Thanks.I previously downloaded the documentation of SAP marketplace, but I can't find it again.
A quick google search showed them here as well:
Moderators: If this is not okay to post, please feel free to delete the link...
Edited by: Alexander Obé on Sep 1, 2008 3:46 PM
The Access Control user guides are available on http://help.sap.com, specifically here:
http://help.sap.com/saphelp_grcac53/helpdata/en/45/92C7FA00494714A4162AD707D9B328/frameset.htm
SAP Documentation is regularly updated. I recommend against downloading it from sites that do not maintain the accuracy (and violate SAP copyright). -
Can you get a notification light (flashing led) for the iphone 4s?
Hi, Im a new user got an iPhone 4s. Just windering can you get a LED norification light for this. I've searched the app store but not found anything?
No it works with phone calls too.
I just tried it.
Try restarting the phone -
When I try to download anything from iTunes or the App Store on my iPod Touch, my sister's Apple ID pops up instead of mine. How can I get my iPod Touch to display my Apple ID and ask for my password rather than display my sister's Apple ID?
You can try to tell the iPod to use yours:
1. Tap Settings
2. Navigate to "iTunes & App Store"
3. Tap Apple ID:
4. Tap "Sign Out"
5. Sign in to your account. -
Can I get my iPod touch 4G replaced for the new ipod touch 5G for some fee?
I own an iPod touch (4th Generation) 32gb and after itouch 5g's release, i am willing to buy it but my dad will not buy me the new one, so can i get the new one in exchange of my previous ipod touch with some additional fee ?
Apple will only give you a 10% recycling discount it you turn in an old iPod
-
How can we get Delivery Slip and Invoice number for the SO in custom Report
Hello,
I am developing a new report for the Sales Order.For this , I have to diplay the Deliver slip and Invoice number.
Could you please explain the logic for this.
Thanks and Regards
NTRHi,
Pass sales order number to table VBFA-VBELV. You will get the complete doc flow. VBTYP_N differentiate whether it is delivery,GI or invoice etc. (Check for domain values for more info on this)
Thanks,
Vinod. -
I have bought a Idjay system and I have the App on the 4S phone however the phone is not aknowledging the system. After googling we found that their is an issue with IOS7 for this system. So we tried an Itouch, its on IOS6 but doesnt work. Then tried an Ipad but the first version. Thought we had success when the Ipad seen the system connect to it. However I then went to download the App onto the Ipad but it needs IOS6 onwards and as its the first model of the Ipad the latest version is 5.1.1 so I cant download the App...
Any suggestions? do you know how to get the 4S phone to work with it as that would be the ideal scenario?
Thanks in advanceThey said that there shouldn't be any reason for it not to work. I bought it off ebay and the previous owner used it on the same devices that I am
-
she really never used the icloud on her phone so i do not know what to do
You will need to try to restore your iPhone from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't do the restore then you will need to try Recovery Mode.
Read this: http://support.apple.com/kb/ht1808
Follow the instructions very carefully.
Maybe you are looking for
-
How do i add an external blog to a specific part of my home page?
hi, i am wanting to add a tumblr blog to my home page. within muse, how do i configure exactly where in my site i want this blog to show up? is there a widget or something? i would like the most recent blog post to show up (in a window perhaps?) on t
-
Strange things happened since my mbp 13' (MD-101) was upgraded to 10.8.4 ----------- time icon, battery icon,and language icon (these icons can be moved when held Command key and drag) cannot be loaded on startup, but they still can be loaded when yo
-
Built in camera no longer recognized..
Just installed new hard drive, installed Leopard, iLife and iWork 09 and now my built in camera is no longer being recognized by iChat and other applications... Any advice?
-
I bought a magazine template from Pages Toolbox and it's only showing 2 pages out of 10 why?
This morning I bought a template from the Pages Toolbox Kit. It's a new magazine template and when I viewed it before I bought it there were 10 pages. I procedded to buy it. When I opened it to work on it it is only showing the cover and the first pa
-
Error occurred during initialization of VM Using Whs
RDBMS Version: 9i Operating System and Version: Microsoft Windows 2000 server Service pack 4 Product: Oracle Lite, 9i AS: 9.0.2.3 When I use the wsh.exe in cmd.exe I have the error: D:\oracle\prodotti\Ora9iasfe\Mobile\Server\bin>wsh Error occurred du