Can't get past user agreement
I can't get past the user agreement in setting up Elements 11on a mac.The window keeps popping open. Can anyone help me?
right click your setup file and click "run as administrator".
Similar Messages
-
Can't get past License Agreement
I just got a new Ipod nano, and for the past three days I've been trying to get it to work. For some reason I can't get past saving the License Agreement. I've done it atleast twenty times. Help?
Are you seeing a Continue button anywhere? Click the little Agree box then the Continue button, there's no need to save the agreement. If you aren't seeing all the buttons try increasing your screen resolution to at least 1024x768 so you can see the whole page: iTunes window does not display all options
-
Can't get past apple agreement to get to use my ipod or itunes...
I am trying to get into itunes, but when i try to register my ipod, the screen will not expand anymore to the right. so i am left choosing "register later". which pops up to the apple agreement. i check the box saying that i agree, and click the save button. and a screen pops up wanting me to store it in my documents. so i do, and then nothing......the middle of the screen that should turn into itunes store, just stays on the apple agreement. frozen like. how do i get past here?????? i've had this ipod for over a month, and i still can't use it, let alone sync it to itunes. please help me...
i'm don't know how to change the resolution. can you please tell me how to do that?
For detailed instructions, see the following document:
iTunes window does not display all options -
I've reset my network settings. I've cleared cache and cookies in the browser. Before yesterday the login screen would appear anytime I attempted to use an app or program that required internet access. Pretty much every program. Now I have a brick tablet at work. I've reset everything I can find. I'm at a dead end.
I've seen other ipads that had the auto login togle and auto join togle under network selection, my ipad does not have those options. Logging in at home is working fine on my private network. This public network is not being reset or forgotten when I choose "forget network" or Safari is blocking the login page and I don't know how to un block it.Well, when I join a public wifi, a log in page displays a few seconds later, displaying the user agreement. But, earlier today, I was trying to connect my friend's 3GS to a public wifi, and it did not show up. So. I don't really know what happen. I think you should toggle the auto Join to on.
-
It won't let me start, I can't get past user name.
When I try to get started it will not accept my username. No matter what I try. I did register through Firefox but that name did not work either. I am seriously hating this app. If I can't get it to work soon I will delete it and try to find a new web browser too.
HELP PLEASE! None of your forums, FAQs or instructions tell you what to do in this situation.
''Edited to remove swearing - TonyE''In Firefox, go to Tools, Options, Security, Saved Passwords.
Look for the entry of chrome://weave (Mozilla Services Password).
You will see a user name field there. Use that as the user name in Firefox Home and it will work.
Very annoying and a pain to setup on the iPhone, but at least it works. My assumption is that Firefox Home needs to update their app so that it asks for your e-mail address instead of this auto-generated user name.
This fixed it for me. -
I am unable to create an account. Can't get past the user name and password bit.
I am attempting to set my my new I-pod touch for the first time. I can't get past the password stage. Also, I have not found how to even connect to get it charged and started. Can anyone help?
Try following the instructions in the iPod Users Guide:
iPod touch User Guide (For iOS 4.3 Software) -
I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.
MacBook Pro
MacBook Pro Apple Support
Apple Support Lion
Lion Mac OS X Communities -
successfully loaded ios7 to iphone 4s.
now iphone asks me to agree to terms and privacy, then it locks up and won't accept my "agree."
goes in a loop and can't get past this screen. Pls help. thanks.Have you tried resetting the device?
Hold down the home and lock buttons until you see an Apple Logo, then release the buttons.
If that doesn't work, you should check to see if you have a backup because you may have to restore your device. -
was forced to install Adobe again (maybe just update it) and can't get past step 3/3 because its forcing me to buy it. now its half installed and i need to agree to terms and conditions..
Let's start with what you are trying to install. Adobe Reader is free, so it won't be forcing you to buy anything. So
- What are you trying to install (full name, please, Adobe make lots of things)
- What system (e.g. Windows 7, Mac OS Lion, iPad...)
- Where do you go (what web address) to start off?
- Why were you "forced" to do this? -
I can not get past the license agreement and term and conditions page after updating my i5 IOS
Restart your phone and if that doesn't help, reboot the device.
Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up. -
i upgraded to IOS 7.0.2 on my ipad and now I can't get past the terms and conditions page to finish the setup. I click agree and then a small box appears to click agree again and I can't choose agree or disagree. I just need my ipad to work... help
Reset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Updated my iPad and can't get past agreeing to T
Updated my iPad and can't get past agreeing to t&c as the part on my screen where u have to agree is broke. Is there any way around this or will it only be resolved when screen is fixed?
Try a device reset and start over again with the setup.
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
Re-reading the post, I now see your issue more clearly...can you rotate the screen (be sure Orientation Lock is disabled) to have the "agree" tap-able section in a different physical place (out of the bad section) on the screen so the bad part of the screen will be in a different area? Give that a try.
Orientation Lock
About the iPad Side Switch - Apple Support -
Can't get past "terms of Use" screen at initial set-up
I'm trying to set up our new Nano, but I can't get past the "Terms of Use/User Agreement" screen. There is just nothing showing up which will allow me to "accept" the terms. When you scroll to the bottom of the terms, there is nothing, and there are no tabs anywhere else on the page which say "accept". I've updated my itunes software, operating system software, and tried several times to eject, then reconnect ipod, but no good. Please help.
Hello Annie0602,
And welcome to Apple Discussions!
Try setting your computer screen resolution to at least 1024x768. For more help, see this Apple support document.
http://support.apple.com/kb/TS1845?viewlocale=en_US
B-rock -
Out of the clear blue - the Premier Elements Organize "Licensing Agreement" shows up on my screen. I click "Accept" - it goes away - and within 5 seconds pops up again. I can't get past it. I've used the program successfully for over 2 years. Anybody else having this problem? I use Win 7 x64, I have TONS of disk space (read over 570 GB free on "C Drive"). I have 12GB of DDR3 Memory. I'm using an AMD 6 Core processor with an ASUS mobo. All other programs work fine including several other Adobe programs.
jazztrptman3
Thanks for the follow up. Sorry the news is not better.
Have you done a Tools/Error Checking for the Local Disk C?
Then, maybe
In your uninstall/reinstall troubleshooting, have you
a. uninstalled using the usual Control Panel route
b. did a ccleaner run through with its regular and registry cleaning parts
CCleaner - PC Optimization and Cleaning - Free Download
c. reinstall with antivirus and firewalls Off.
I have been doing some searches....any chance you have a RAID configuration change in your computer environment?
Can you right clicked the program desktop icon and select Run As Administrator? If so, please do so. Are you still running the program from a User Account with Administrative Privileges?
You might want to take a look at some of my encounters with activating Premiere Elements and see if there is anything in that which applies to your situation.
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Is your input that you can get paid technical advice from Adobe Tech? I am not sure if it offers (even for a fee) troubleshooting for earlier versions.
Please update us on your progress when you get a chance.
Thanks.
ATR -
I signed into my Apple ID on a new phone and I already had it on my iPod. When I signed into the new phone it won't let me buy anything unless I know my old security questions but I don't know the answers to them. How can I get past those or change them?
See Kappy's great User Tips.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
Cheers, Tom
Maybe you are looking for
-
My Imac seems to have a mind of it's own
I put my Imac to sleep over night, but when i go to use it it has shut down, and then my internet stops working on my ipad and phone as well until I restart my Imac and then I have problems with my internet. This has happened about 5 or 6 times now.
-
How to get DocID and Document name
Hi All, I am working on BO XR R3.1 version.i am looking to get DocID by BO SDK.i am able to see there is one fuction to for CUID (getCUID()) in BO sdk) same way can i get DocId like(986752) with single docid and documnet name. or is there any fuction
-
Intermittent "Access to account "(Account Name)" is not permitted."?
A couple times today I got the following message: "Access to account "(Account Name)" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVAccountRefreshQueueableOperation." I replaced the real account name with (Accoun
-
to purchas apps, and music. if you have not done it in a long time you have to hav the anwsers to your security questions. i do not know the anwsers to mine, and there is no way to change them without knowing them. if there is a way to change the s
-
Hi, I am trying to change quantity of a existing Material BOM item using CSAP_MAT_BOM_MAINTAIN function module. I am passing Material, Plant, BOM Usage, Valid from (same as in exisiting BOM), FL_COMMIT_AND_WAIT = X, FL_DEFAULT_VALUES = X and populati