Can't get SSL to work :(
Hi guys,
Little question: I can't get SSL up and running . I used the cer. that was created by the installation of my new mac OSX 10.6 Server. I exported the cer. and have imported it in my Macbook Pro (Mac OSX 10.6.1) now I want to use it with a VPN connection but can't connect (without using the cer. everthing works). Any ideas?? I'm not the Mac OSX expert but I know my way .
Grtz
Sgt Van de Vyver
Belgium - Antwerp
PS: I've tried recreating the SSL certificate to no avail.
If i enable the https server for SDM etc, the SSL certificate works fine.
Similar Messages
-
Can't get SSL to work for WebVPN
Hi all,
I'm trying to get webvpn setup, and have it all configured correctly.... but there seems to be a problem with the SSL part.
I can connect on port 80, it redirects to port 443... but never shows the login box, just keeps trying to load.
I can telnet to port 443 fine and i've disabled all other services using port 443 (like http secure-server).
The status is UP for the gateway and context. I've no idea what to do next. It appears to be trying, but not succeeding. I've tried different IPs, on different sides of the NAT. I've tried with loopback ip, ips on the VLAN, the public IP etc.
Please please help, here's some info...
MD1#sh webvpn gate MD
Admin Status: up
Operation Status: up
Error and Event Logging: Disabled
IP: 192.168.2.199, port: 443
SSL Trustpoint: SSLVPN
FVRF Name not configured
MD1#sh webvpn cont MD
Admin Status: up
Operation Status: up
Error and Event Logging: Disabled
CSD Status: Disabled
Certificate authentication type: All attributes (like CRL) are verified
AAA Authentication List: default
AAA Authentication Domain not configured
Default Group Policy not configured
Associated WebVPN Gateway: MD
Domain Name and Virtual Host not configured
Maximum Users Allowed: 25
NAT Address not configured
VRF Name not configured
MD1#sh webvpn install st svc
SSLVPN Package SSL-VPN-Client version installed:
CISCO STC win2k+ 1.0.0
1,1,3,173
Mon 12/11/2006 18:41:54.43
MD1#sh webvpn install st csd
SSLVPN Package Cisco-Secure-Desktop version installed:
CISCO CSD IOS
3,1,1,45
Mon 10/23/2006 11:18:00.42
Thanks
~MattPS: I've tried recreating the SSL certificate to no avail.
If i enable the https server for SDM etc, the SSL certificate works fine. -
Have entrourage and want to use Mail. Can't get it to work.
I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage.
I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
I am on Charter.net at my office and sbcglobal.net at home.
How can i get this to work. I can receive on Mail, but i can't send.check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption. Verify the setting from your old machine setup.
-
Cisco 1812 wireles setup, can't get it to work
Hello everyone,
I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.
I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):
ip cef
ip tcp synwait-time 10
no ip bootp server
ip name-server <removed>
ip name-server <removed>
crypto pki trustpoint TP-self-signed-1358229530
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1358229530
revocation-check none
rsakeypair TP-self-signed-1358229530
crypto pki certificate chain TP-self-signed-1358229530
certificate self-signed <removed>
quit
username <removed>
bridge irb
interface Null0
no ip unreachables
interface FastEthernet0
description $ETH-WAN$$FW_OUTSIDE$
ip address extip extsubnet
ip access-group 101 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip inspect sdm_ins_in_100 in
ip inspect SDM_MEDIUM out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
interface FastEthernet1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
shutdown
duplex auto
speed auto
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation hdlc
ip route-cache flow
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Dot11Radio0
description 802.11g
no ip address
encryption mode ciphers tkip
ssid <removed>
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 <removed>
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
description 802.11a
no ip address
shutdown
encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key
encryption mode wep mandatory
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Vlan1
description $FW_INSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
bridge-group 1
interface BVI1
ip address <internal router ip> <subnet>
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 <external router IP> permanent
ip flow-top-talkers
top 5
sort-by bytes
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
<bunch of static nats>
<access rules>
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 <removed>
transport input ssh
scheduler allocate 4000 1000
webvpn context Default_context
ssl authenticate verify all
no inservice
endOkay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.
Either that or my WPA-PSK configuration is broken.
I switched over to an open network with no encrpytion and everything works now. -
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
-
HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?
I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???
If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao. -
Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.
Hi,
Is there an iPhone involved ?
If not, what happens if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
Is the Apple ID linked to an iCloud account ?
In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
9:14 pm Friday; April 11, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.
Hello,
You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
http://support.apple.com/kb/HT1619
If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
Best of luck -
I have a go daddy email account and I can't get it to work on my iPad
I have a go daddy email account and I can't get it to work on my iPad
Try turning the email account off and then turn it on again. Settings>Mail, Contacts, Calendars>select your gmail account>Off. Go to the mail app and then come back to the account in the settings and turn it on again.
If you can't find any other way for the iPad to accept the password, delete the email account and then add it back onto the iPad. -
I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?
I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?
The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues. -
Iphone 5 went black. Tried pushing on/off and circle at the same time. Worked yesterday and then did it again today. Can't get it to work.
You need to hold those button longer until you see the apple logo, then release, then wait for the phone to boot back up.
-
I just bought a new computer and had files transferred along with itunes to the new computer. I can't get it to work. It doesn't recognize the extensions for itunes. I also tried downloading Quicktime and couldn't get it to download.
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I bought a DATAPILOT to transfer pictures to my macbook and can't get it to work. Any suggestions please?
Best if you try and explain what you are trying to acheive.
Iphoto is a different paradigm than you're used to. I don't understand why you are trying to transfer your edited photos back to an external disk.
There are tutorials here
http://www.apple.com/findouthow/photos/
Regards
TD -
I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me
I have signed up for adobe conversion to microsoft word and I can not get it to work - can you help me?
Hi Mike,
I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
I apologize for the inconvenience.
Best,
Sara -
Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?
Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?
Welcome to the Apple Community.
The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.
Maybe you are looking for
-
ITunes 9.1.1 - "Encountered an unexpected error and has to close"
Hi I downloaded the latest iTunes upgrade and ever since I've been having problems. iTunes will be fine until I sync my brand new iPod Nano and then I get a Windows message saying "iTunes has encountered an unexpected error and has to close". Then ev
-
How can I list the songs in an album in iTunes without having to do it one by one? Some albums are not numbered or they show 1. 1. 1. 1. 1. 1. 1.
-
OLAP Variable in DTP - Not able to save the selection
Hi Guru's We are on BI 7.0 and supportpack 13. I am facing an issue with the OLAP variable in DTP filter . I am not able to save the selection/filter within DTP via OLAP variable. I am able to test the values of the OLAP variable within DTP screen (
-
How do I get my home page to come up instead of a blank new page.
When I go on line, instead of going to my home page it goes to a blank new tab. I have looked in tools/otions/general and it still does it.
-
Selective and slow syncing in iCal
Today I updated my iPhone and iPad to iOs 5 and my laptop to 10.7.2. The iPhone and iPad have subsribed to iCloud, but not yet for the laptop. I also have an imac running 10.6.8 (can't update it to Lion because I need Rosetta) and a G5 running 10.5.8