Can't get the install CD's to boot.

Dear all,
I've seen topics like this but not quite the same.
I have a Macbook Pro without anny OS on it. I'm trying to get the original version of OS X installed (10.5.2). It however refuses to boot from the CD. Actualy it boots..and restarts.. thats it. The CD i'm using is an original instalation CD. It was most likely not sold with this exact system but with the same model (its a company laptop and we have purchased about 10 at the same time all with their own CD's)
When the macbook starts up it just asks for a bootable cd.
Windows XP will boot/install normaly but we need OS X on the machine (next to windows).
The CD is fine. Windws can read it and so can the mac when booting with the "option" button pressed. But select it will just cause the mac to reboot again.
Annyone have anny ideas how to get the Instalation started?
Kind regards,
Marc
Message was edited by: themac1983

You either need the OS installer disk DVD that came with the MBP or a retail version with an OS version equal or higher than the OS that originally came with the MBP. Apparently the DVD you are using is not the correct one.

Similar Messages

Mac Book Pro, Bad disk but I can't get the install DVD to work

I have a 13" macbook pro that started to have problems with different apps. They would crash immediately when you clicked on them. I ran disk utility repair permissions and everything was ok but when I went to verify the disk it reported that the drive was corrupt. I bought a new drive, installed the drive and inserted the Install DVD that came with the machine. After a few minutes I get a message "You need to restart your computer. Hold down the power button...." I tried using a Leopard install DVD and same problem. Originaly this machine came with SL but I figured since I am using a new disk (unformated I assume) that any OS install DVD would get me formatted and back to a point where I could connect with Time Machine and restore. I swapped out the RAM, HDD cable and DVD drive with another MPP with the same results. Any thoughts would be appreciated.

Thanks OrangeMarlin.
I have several MPP's. The one that is failing originaly came with SL. I don't have an SL disk so I attempted to use a Leopard to install a brand new disk drive. I would have thought that it didn't matter if it was SL or Leopard since it was a new disk (no reference of what was on it before). I could see an issue with compatability between a Intel OS on a G5 but SL vs Leopard on an Intel MPP should be OK. Thoughts?
The install DVD I am using "should" be the correct disk. I understand the sensitivity of using the disk that came with the machine. The reason I think this it is the ocrrect disk is it says 13" MPP and 10.6 for the OS which fits the description of what this machine had on it when it was purchased. I don't believe I have any other 13" machines with SL.
I also ran the diagnostics last eve. All passed.
I'm thinking of putting a working 10.5 disk from another machine into the failing machine and running Verify from the disk utility to see if I get the same error. If so, I would assume my disk controller is bad and need a new motherboard.

Using windows vista I can not get the install to complete and work properly with a usb connection.

I am running Vista (32 bit) and I was trying to update to new HP software. Tried using full software install from file on HP website (release 14.0 full version). When I try to install, it will not recognize the usb connection of the software. I tried going back to version that came with the printer and had a similar problem. Now I am stuck not being able to get either version 12 (which came with the system) or version 14 (new update on website).
I need help trying to figure out how to get the software to go through and connect properly using usb and having the scan function working.......
Any ideas.

Hi,
Have you tried plugging the USB into a differnt port at the back of your PC?
IS the USB directly connected to your PC and not through any USB hub or extention?
Do you see any response while plugging the USB to your computer?
If yes, please clarify.
I would also suggest trying a different USB cord, not longer than 2-3 meters long and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I am just going back to using my iMac. Had to upgrade to snow leopard and not want to upgrade to OSX Mavericks. I can't get the install because it is currently at 10.9.1. Where can I find the 10.9 version so I can upgrade "pre-patch"?

I am trying to install (upgrade to) Mavericks from Snow Leopard (10.6.8). However, the current version of Mavericks is 10.9.1. I'm being told that I can't do this upgrade without 10.9. Any ideas as to where I can find the straight 10.9 (pre-patch) version of Mavericks?

The version on the App Store for Mavericks is 10.9.1 and it's the full installer.
The only time you would need 10.9 is if you were installing the delta download of 10.9.1 from Apple's Software Update Support page.
So, just go to the App Store and you will be able to download/install Mavericks 10.9.1 without the need of 10.9.

Can't get the install from disk Production Premium from cs 5.5 to 6 to recognize my serial #

My install takes the new serial, but says it can't find a qualifying product. SO I enter the serial listed on my account for the 5.5 & it says it is not for a qualifying product, what gives?

For the better assistance I would request you to please contact our Adobe Support , as they will be able to help you with this issue , no one would be able to help you here.
Please go through this link for details :- http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

Why can't I get the "Install App" button in the app store to work for OX Mavericks?

I am trying to install OS Mavericks and I can not get the "Install App" button to work in the App store. When I double click it runs for 2 seconds and then stops. I am running OS Lion 10.7.5 now so I should be able to install and run OS Mavericks. What am I doing wrong or can anyone tell me what I need to do? Thanks!

gwen168 wrote:
... When I double click it runs for 2 seconds and then stops.
Single-click the button.

I am trying to download a book on my ipad. It says I need to install itunes. I have itunes already. I frequently get a message to re-install itunes. I do, but I still get the message, and I still can't get the book on my ipad.

I am trying to download a book on my ipad. It says I need to install itunes. I have itunes already. I frequently get a message to re-install itunes. I do, but I still get the message, and I still can't get the book on my ipad.

you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format. How can I get the Apple Mail format to come up when I click on share?

Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format. How can I get the Apple Mail format to come up when I click on share?

iPhoto preferences - set the email client to Mail
LN

I want to re-install my Pre-Installed Lion Macbook Pro, but I can't get the Lion OS from App Store with my Apple ID. Please help, thanks!

Hi, I want to do a clean re-installation of my end 2011 Macbook Pro which comes with pre-installed Lion OS. I go through the installation steps and after App Store verified my Apple ID, it prompted me that I did not purchase the Lion OS. I am very surprise to see this message which my pre-installed Lion Macbook Pro should have it. Please help and advise how can I get the OS? All other bundle softwares were in the purchase record except the Lion OS.

That was my mistake - sorry - it IS Command-R to boot to the Recovery disk, not Command-D: I either just hit the wrong key or am just now coming awake from my nap.
Let me see if I can just explain it in a few steps - I don't know of any link (but it would make a good User Tip):
Create an up-to-the minute back-up of your internal hard drive using an external hard drive and Time Machine.
Boot to your recovery partion - holding down Command-R on boot.
Use Disk Utility to erase Macintosh HD - use one GUID partition and format as "Mac OS Extended (Journaled)". Unless you're selling the machine, there's no need to do a secure erase (which can take hours).
After you erase the disk, re-install Lion from the same Recovery partition.
After installation is complete, reboot, again holding down the Command-R keys to boot into the Recovery Partition.
Restore your Time Machine back-up. This could take several hours.
Reboot after restore and you're back in business.
That should take care of everything - all you need is an Internet connection.
Call back if I didn't explain things too well - at least I got the Command-R right this time!
Clinton

I have reinstalled mountain lion on my MacBook Pro and can't get the games back App Store says they'll already installed how can i download them can anyone help

I have reinstalled mountain lion on my MacBook Pro and can't get the games back App Store says they'll already installed how can i download them can anyone help

I have eactly the same problem - it seems that the downloaded version on MBA is version 6.0 and on iPad is is version 2.0 -
Issue is when i tried to save the presentation on MBA Keynote 09 - Keynote crashed.
I tried to save is as Powerpoint in MBA and it crashed as well!
Message was edited by: Innovaxin

I Loose my windos xp. Installed windows 7 and get old data. Where (or how) can I get the old Firefox profile where I have my bookmarks? Thanks

I loose my windows xp. Install a new Hard drive with windows 7 and a new Firefox. I have acess to old HD data. Where can I get the Firefox profile with old bookmarks?

See the following article: [[Back up and restore information in Firefox profiles|Back up and restore information in Firefox profiles]]

I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?

I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?

Yes, you can!(:
STEP 1: Open iTunes
STEP 2: Navigate to the "iTunes Store". It can be found under the "STORE" tab.
STEP 3: On the right side of the store there should be a "Quick Links" Section. Click on the "Purchased" link.
STEP 4: Navigate to the "Music" tab and click on "All Songs". Then at the bottom of the screen there will be a button that says "Download All". Click the button and your songs will be begin downloading!
NOTE: This will only work with songs that you bought from the iTunes store, if you imported them from a CD, you will have to do it again.
NOTE: You can also do this with Apps, Movies, TV Shows, and Books.
NOTE: You may have to sign in with your Apple ID to verify the download.
Hope this helped! Enjoy your music!(:

I have firefox 4 Beta installed on my computer and I can't get the new Firefox 4 to install, so some of the functions don't work,such as dropdowns on Google Toolbar? How can I fix this?

I installed Firefox 4 beta when it was available as a tester before Firefox 4 was released, so I had two versions of Firefox on my computer. When Firefox 4 was released this week, I installed it and it replaced Firefox 3.6.15. For some reason it seems it didn't install the full version of Firefox 4, instead it's a similar version to the Beta version. For example, the drop down on Google search doesn't work when you click on an item in the drop down. Also the orange button that is supposed to replace the buttons on the top left of the browser is not there. It still has the 8 buttons, ie File, Edit, etc. How can I get the full version to install on my computer? I've tried uninstalling and reinstalling it and I get the same result. My computer runs Windows XP Media center Edition OS. Please advise me on how to fix this. Thanks.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
I also have a question. Have you ever been able to access these sites from the Firefox on that computer?

I have a MacBook with OS X 10.5.8 and I purchased a Mtn Lion OS up grade and it keeps telling me to install via the Mac App Store, but I can't get the Mac App Store installed on the MacBook it wants at least 10.6.6 so I seem to be stuck . Help

I have a MacBook with OS X 10.5.8 and I purchased a Mtn Lion OS up grade and it keeps telling me to install via the Mac App Store, but I can't get the Mac App Store installed on the MacBook it wants at least 10.6.6 so I seem to be stuck . Help

ChuckPhilyaw wrote:
I have a MacBook with OS X 10.5.8 ...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs > http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

Can't get the install CD's to boot.

Similar Messages

Maybe you are looking for