Can't hear audio on tracks three and four

Hi,
I'm new to FCP 5. When I go the the audio mix window I can see the audio for tracks 3 and 4, i just can't listen to it. I checked my general settings under real time audio mixing and it says 8 tracks. I don't have any other applications up. Any ideas?
I should also mention that when I turn off tracks 1 and 2 I still can't hear the other tracks
Dual 2GB G5 Mac OS X (10.4.2)

First, check the simple things .. like are those 2 tracks muted? Are both tracks enabled?
Do FCP's meters indicate that there IS audio there? What happens if you load either of those tracks into the Viewer - can you hear them? What happens if you move the clips on those tracks up to track 1 & 2?
-DH

Similar Messages

I can't hear the narration track over the audio, what do I do? And where is the "audio mixer"?

Just downloaded Premiere Elements 12 and lost my favorite audio music (wish I could bring it over from 11 somehow), so I drug a new clip in the audio track and now I can't hear my narration track. Also, can you pull up projects made in 11 with Premiere 12? Should I delete 11 off my computer? Also, where is the audio mixer?

The Audio Mixer is under the Tools menu in Expert view or under the Tools drop-down menu at the top of the interface.

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos?        ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374

Can't hear audio in mac PE 9

I can't hear audio in my sceneline or timeline when playing clips. Makes it really hard to edit!
i capture video/audio from my mini-dv sony cam or from vhs through firewire gadget...
i added an m4v file to the project, couldn't hear audio either
the audio is there, because if i just trim off the ends and create a dvd it has audio....
The problem is on my mac mini... i installed it on my i7 laptop and audio works just fine.
i've checked all the audio settings on both machines and they are the same.
both have vlc and perian installed
just installed the 9.01 patch... no change
does anyone know what might be causing this?
thanks

I've tried changing those to all possible combinations.... System Default, Built-in Output, etc. nothing helps.
on the mini, if you have speakers plugged in, it shows "headphones" as the only output option
i notice in the "audio output mapping" it shows headphones 1 and headphones 2
that seems strange as there is only one set of headphones
i checked my laptop settings ...there was nothing selected on my laptop in audio output mapping
"nothing selected" was not an option on the mini... so i renamed my prefs file and started PE again
then i had nothing selected in the audio output mapping... but it still didn't work
i forgot to mention something.... if i click on the slider/trim thing, and just hold down the arrows on the keyboard to advance the video, it advances at super slow motion and i DO get audio... so i think i have preferences set right.
any other ideas?

Asf file - can only hear audio, no video...

i have been given an asf video and have downloaded flip4mac but can only hear audio of iot, no video...
any idea ?
thanks a lot in advance

Some Windows Media formats are not supported on Mac's.
Check the http://flip4mac.com Site for more answers.

HT1386 Syncing works but can't hear audio with headphones.

Syncing works but can't hear audio with headphones. Works without headphones though.

Have you tried other headphones?
What does syncing have to do with the problem?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

When I enter video in timeline, does not show on monitor. when I play video, can only hear audio.

So within the past couple of days, when I load video into the timeline it does not come up on screen. When I play video, I can only hear audio. If I click on monitor, I get still frame of video. Also received window saying we have detected an incompatible display driver. Not sure why this has happened all of a sudden....

1Communicator
Does your Premiere Elements 10 run on a computer with a NVIDIA GeForce video card? If so, which specific NVIDIA GeForce card? If your computer is not using a NVIDIA GeForce video card, then that Announcement at the topic of the forum does not apply to you. This particular issue is specific for Premiere Elements 10 NVIDIA GeForce.
If all that did apply to you, what version of the driver did you roll back to?
http://www.atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
If you do not have a NVIDIA Ge Force video card, something else, and you have only one video card, then try deleting the BadDrivers.txt file. In your Windows 7 64 bit, the path to it should be
Local Disk C
Program Data
Adobe
Premiere Elements
10.0
and in the 10.0 Folder is the BadDrivers.txt file that you delete. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
Please let us know the outcome.
Thank you.
ATR

Purchased a TV show in itunes...can only hear audio, will not display video

at 1st....
Purchased a TV show in itunes...can only hear audio, will not display video
now...
shows the show is 48 min but then is only 30 seconds once opened

Hello piff316,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

Can not hear the voice of caller and caller can not listen me

hi
i got iphone 4 can not hear the voice of caller and caller can not hear me while head phone and i pod working perfectly.

You may try using a different headphone to isolate the issue. And test your headphone as well with a different device like an iPod or other device, if it works then it's with the phone, that may needs service

I can't hear on Facetime for Mac and other people can't hear me. I recently downloaded Boom and I'm not sure whether it's the problem or not.

I can't hear on Facetime for Mac and other people can't hear me. I recently downloaded Boom and I'm not sure whether it's the problem or not.

Remove it according to the developer's instructions and see whether there's an improvement. Back up all data before making any changes.

Recording Audio...Can't hear over other tracks when recording!!

Hello again and thanks for the help. So why, when I'm recording audio, a guitar for example, is the signal so low I can barely hear it above the other tracks. Then, all of a sudden, when I play back what I recorded it almost knocks me back off my seat it's so loud. How do I turn up a track i'm recording enabled track so that I can hear better what's being recorded? This is a problem I've run into myself and when I'm recording others, like a vocalist. I need some way to turn up a "cue" send level even if it's coming out the same monitors that the rest of the mix/track/song is.
Any tips would be much appreciated. THANKS AGAIN

I understand that this is directly related to my monitoring capability but am assuming there's some way, INSIDE of Logic, that this level adjustment can be made. Why, when recording, can you barely hear a signal and then when a track is automatically set to 0.0 dB it is much much louder. Why the difference.
I, too, have a MOTU 828mkII. Admittedly not as good with it as I should be, I need to work more with my monitor mix but this situation seems to often be used to dodge my real question ^ up above. Any tips or tricks are much appreciated so that's cool, but see if you can at least shed some light on what I'm confused about up there^^^^^^
I DO NOT want to use headphones to record this guitar. Feels more natural for me to record directly into Input 1 of the 828 and hear all the tracks coming out of my monitor while I'm recording the guitar over it. Again, why so quiet when recording and why, then, so loud when no level adjustments have been made when playing back the audio. Again, no level adjustments made on anything and all of a sudden the most recently recording track is louder relative to all others
thanks

I need help I have the m audio m track plus and working out of logic studio 9 and it comes up but I have no sound, but I can here it using garageband. How do I get it to work with logic studio?

How do I use my M Audio M track Plus with the logic pro 9 software? It works with garageband, but I am not getting anything out of Logic. It does show up on list as option and I have done all of the sound preferences to M audio, etc. etc. Please help

I got to that page but clicking on the Subscribe Free had no effect.
Nothing showed in the Podcasts nor the iTunes U.
In fact I also subscribed to Stanford's lectures and despite actually managing to DL them there is still no subscription in iTunes U, just the Intro to Computer Science belatedly.
Peter
I'd like to attach the screen grab of the out of order and randomly DLed selection of Harvard's course, but the forum won't let me attach it even though it is only 456k. Correction, close post and retry and now it lets me. NB how intermittent the DLs are and in no particular order.

Can't Hear Audio - Realtek Audio Device

Hi Guys,
I have an Asus P5Q motherboard with a Realtek Audio Device on board and I can't here any audio. I don't have the tracks muted, I do have the headphones plugged in and I can hear other audio outside of the program. I did have this problem with Premier Pro CS3 but after a reboot one night it just started working...
Is there any particular drivers i need or software or settings to change??
Link to motherboard specs: http://au.asus.com/products.aspx?l1=3&l2=11&l3=709&l4=0&model=2164&modelmenu=2
Many Thanks in advanced,
Tim Raphael

Also download http://www.asio4all.com - a free ASIO driver which will work with at least some RealTek devices which I've come across. This driver will dramatically improve latency (reduce it!), and you can actually work realtime in Audition. In Audition's Audio Hardware Settings you will probably see both the RealTek generic driver and Asio4all, as they can coexist on a system. Select Asio4all everywhere you can.
Now, RealTek audio chips aren't exactly high-end hi-fi, so don't expect crystal clear noise free sound - and certainly do not blame Audition when you somehow can't get it ;-)

Can't hear audio in trim mode.

When I'm in trim mode and I play, in order to move the cut, I can't hear any audio. It has nothing to do with scrubbing on/of because pressing shift+s has no effect. It's also not working when I'm holding down "K" and pressing "L" simultaneously.
DrL

works for me. Have you looked in the view menu to make sure audio scrubbing is checked? It's possible you've reset the keyboard shortcut or your keyboard has somehow or other gotten corrupted. You might try deleting your fcp preferences. Use this:
http://www.digitalrebellion.com/prefman/

Can't hear audio from handheld mic recording

I can hear interviews I recorded with a handheld mic on videos edited in iMovie and uploaded to YouTube only if I access YouTube via a brower such as Safari and Puffin and only if I use my new third generation iPad or an iMac or PC.
If I try to access the videos via YouTube's app on my new iPad, I can hear the nat sound recorded with the video camera but I can't hear the interviews recorded with a handheld mic.
I can't hear the interviews recorded with a handheld mic on my iPhone 4 through YouTube's app or via a browser.
I wasn't having any problem three weeks ago. This just started last week.
What is causing this problem? Is there a workaround or solution?

You're connected to the line-in on the Mac? So set to Line-In or Built-In
http://www.bulletsandbones.com/GB/FAQPages/RecordLineIn.html

Can't hear audio on tracks three and four

Similar Messages

Maybe you are looking for