Can't import D600 files to Organizer

Elements 11 and Camera RAW 7.3 update loaded. Still can't import Nikon D600 files. What now? Operating system is Windows 7 and I have just upgraded from Elements 9.

Are the corrupted due to using the obsolete Nikon Transfer v 1.x?
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
Try copying the NEFs from the memory card in the card-reader to your hard-drive via Explorer or Finder and see if they work any better?

Similar Messages

  • After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow?  Thank you, Filippo

    On IMac 10.9  After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now?  Anyone know?  Thanks, Filippo

    I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
    I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
    Thanks

  • I can not import 60p files from Sony NEX-FS100U to Final Cut Pro X.

    I can not import 60p files from my Sony NEX-FS100U to Final Cut Pro 10.0.1.  Does Sony offer a plug in?

    I shoot fishing footage of big catches.  Slow motion playback appears to me to be much better when shot it 60p even compared to 60i.  It also blows away all of the other formats for a "still" grab.  Thank you for your help as I did a search and downloaded Clip Wrap which converted the files to .mov and they actually do import the full 60 frames.  Thank you again for your reply. 

  • How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

    How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
    I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
    Simply exporting from Premiere back to final cut is also very complicated.
    Thanks for any ideas.

    First, copy the card to a hard drive connected to your fcp workstation.  I always back up all card based media at least 2 or three times.  All hard drive will eventually fail.  It's a question of when, not if.
    I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files.  You can try importing these directly into fcp.
    If you don't, you can try something like clipwrap
    http://www.divergentmedia.com/clipwrap
    or
    Magic Bullet Grinder
    http://www.redgiantsoftware.com/
    But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy.  HDV is a problematic format.  Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Can't import ISO Files in VM Manager because of empty Server Pool Drop Down

    Hello,
    I have the problem I can't import ISO files to my ressources because in the import mask the Server Pool Name Drop Down is empty. In the Virtual Machine Templates mask the Server Pool Name is available and I have already one VM running with a oracle template.
    The Server is 2.2.1 and the vm manager is 2.2.0. The server is a Pentium 4 3.2 GHz with 4 MB of RAM. The High Availabiliy Mode is enabled for this server pool.
    Has anyone an idea what the problem could be?
    Any help will be appreciated.
    Thx in forward
    Ben

    I am not expert in this area myself, but I believe the issue may be with shared storage changes that are needed for high availability.
    The following reference may help: http://download.oracle.com/docs/cd/E15458_01/doc.22/e15444/ha.htm
    I may of course be misleading you completely.

  • Can I import html files into Buzzword?

    Can I import html files into Buzzword?

    Thank you for your post.
    Buzzword lets you import Microsoft Word (DOC, DOCX), plain text (TXT), Rich Text Format (RTF), Word 2003 XML, and Open Document Format (.odt) files. (Font substitution and other formatting changes sometimes occur on import, depending on the content of the document.) You'll need to convert your HTML file to one of the supported file types before importing to Buzzword.
    Kind Regards,
    Michelle

  • Can't import prores files into Premiere Pro CC or SpeedGrade CC

    Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
    I also can't export to DNxHD files to an MXF file either.
    I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
    Conflict?

    I only have one account on the computer and it has Administrator priveleges.  What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator").  I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator".  Also, your answer still does not address the fact that I can't use my jog wheel.
    Anyone else have some ideas?

  • Can't import AVCHD files since i've updated to  OSX 10.7.

    Can't import AVCHD files since i've updated to FCPX 10.03 and OSX 10.7.  Before it worked ok.
    When I try to import files from the Camera, or the Memory Stick they end up looking like offline files.  On my other mac (iMac intel core duo 27", with OS 10.6) I can still import these files.

    Make sure you don't have Proxy checked in Playback Preferences.
    Andy

  • Can't import .AVI files in QuickTime Player

    Hi there - Okay,,I'm a real Noob,,but I can't understand why I can't import .AVI files when apparently I should be able to. I have just purchased a Toshiba Camelio S20 and have taken some test movie shots and when I've tried to open them in iMovie or just open them in finder I get the following message
    'The document “IMAG0002.AVI” could not be opened. The movie is not in a format that QuickTime Player understands.'
    The Quicktime player I'm using is Version 10 and I'm working with MacOS X V 10.6.4.
    What am I doing wrong ?
    Pls help ?
    Thanx

    Heya - thank you so much - have done what you suggested and now i can import the clips into iMovie - no problem!
    But,,,,and,,golly,,don't know if I'm being really really stupid but by converting to DV or MOV I lose all audio from any of the clips that I'm importing...
    Can you help some more - sore to be pain in buttocks !! Am completely new to iMovie so am struggling a bit!!!
    Thanking you

  • I can't import raw files into lightroom

    I have been using lightroom 4. I shoot with a nikon d300s. I recently used a nikon D610 and now it says preview not available. It also says the the raw images aren't able to import. So I recently upgraded to Lightroom 5 and it still says preview not available. I need some suggestions on how to import them.

    I don't use nikon software.  I just use lightroom. I just got lightroom 5. I tried to update to 5.3 but couldn't find the location where to find it.
    Sent from Yahoo Mail on Android
    From:"dj_paige" <[email protected]>
    Date:Thu, Apr 23, 2015 at 10:22 AM
    Subject:[Photoshop Lightroom] I can't import raw files into lightroom
    I can't import raw files into lightroom
    created by dj_paige in Photoshop Lightroom - View the full discussion
    Do you have Lightroom 5.3 or higher?
    Did you use Nikon software at any point on these photos?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7470470#7470470 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7470470#7470470
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Can you import Dreamweaver files into Muse, how?

    Can you import Dreamweaver files into Muse, how?

    If the images aren't showing up in DW, why do you think they will show in Muse?  Obviously, something is wrong with the paths to those images.  And that will most likely be due to the underlying code.
    Can you post an example of a problem page?
    Nancy O.

  • CS3 - can't import jpg - files grayed out - Mac

    I'm trying to complete a tutorial in Fireworks CS3 on Mac 10.5.6.
    The step I'm stuck on is:
    "Select File > Import and browse to the following folder on your hard disk:
    local_sites/cafe_townsend/fireworks_assets/
    Select banner-mockup.jpg and click Open.
    An insertion pointer appears indicating where the upper-left corner of the graphic will be positioned."
    None of the JPG files are selectable, they're grayed out.
    Other files in that folder, TXT and PNGs are selectable.
    Other JPGs that are not in the folder indicated are also selectable.
    I can drag the file from Finder into the Fireworks document ok.
    I've checked the Sharing & Permissions on the files and containing folders and they all have Read & Write.
    I copied a JPG that was selectable for import elsewhere into the fireworks_assets folder, and it's still selectable (not grayed out).
    The files were copied & pasted in an earlier tutorial step from a different folder (Macromedia Fireworks 8/Tutorial_assets).
    Trying to import them from the original location also fails.
    So it seems there's something specific to these JPGs causing Fireworks to not want to import them.
    I can't figure out what.
    The specific file I can't import is attached.

    Not sure why you can't import the file, I'd suspect something is goofed up with the actual JPEG if you can import other JPEGS with no issues. However, if you can drag and drop or  copy and paste the image into your Fireworks document then you're ending up with the same results the tutorial is aiming for anyway.

  • I can't import orf files ! Could you help me ?  thanks

    Hi
    I haven't any problem to  import nef files on lightroom 5 , but I can't import orf files !  Could you help me ?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

  • I can't import any files or folders into Final Cut Pro 7.0.3 projects

    I can't import any files or folders into Final Cut Pro 7.0.3 projects. When I select import and then either files or folders, I am able to navigate to the drive where the media is being stored, but then when I scroll to locate the files or folders the drive disappears. This problem began as an intermittent problem, but now I cannot import any files or folders. This problem started when I upgraded my operating system to Yosemite version 10.10.2 on my mid-2010 Mac Pro running with 16 GB of memory and an ATI Radeon HD 5770 1024 MB graphics card. Can anyone help me figure out and solve this serious problem? Thanks!

    Then just drag the files/folders from your hard drive into FCP.  Don't use the IMPORT option...just drag and drop.
    The problem started when you installed an OS that doesn't support FCP 7.  So if you want things to work smoothly, it's best to go back to an OS that did support FCP 7. Yosemite was written without taking FCP 7 functionality in mind, so it isn't fully functional. It might not do one thing for someone...but works for you in that respect. But then you can't do something else. The ways it doesn't work is always random.  Or it might work great for some people, because they don't use functions that might no longer work....so they don't notice it.

Maybe you are looking for

  • JFrame not keeping focus

    How can I ensure that a JFrame will always keep focus?. I need it to always remain on top and be visible thanks

  • Calendar travel time location

    When I create a calendar item in Mavericks it is calculating my travel time from work however I will be traveling from home. How do I update the location for the travel time calculation?

  • Why not play some videos macbook air

    why not play some internet videos my mac book air

  • Changing Creator's language..

    im using creator on my japanese windows, so...when i patch it yesterday, many component's label become japanese. but i didnt find the pure english ver of Creator on sun's site. can i start my creator with english?

  • Stop Playing Ring tone

    Dear All, I am playing a ring tone on a certain time to some phones, can the phone stop this ring tone if he needs. i am using "play:myringtone.raw" in the execute object. so can i add a softkey on the ipphone so the ipphone user can stop this ringto