Can't Import Quicktime Files Created in FCP

FCP: Version 4.5
Mac OSX 10.4.7
When finished editing a sequence, I exported it using FILE > EXPORT > QUICKTIME CONVERSION > and selected Quicktime Movie, Broadband Medium. I was very pleased. However, I want to go back and make a minor edit to the footage, but FCP wont let me import the file that was created back into FCP. (It says "Error: Unknown File".) I no longer have access to the original tapes, so these exported files are all I have to work with. Any suggestions on how I can get it back into FCP and do some editing? Thanks.
G4 Mac OS X (10.4.7)

It will cost a bit of picture quality, but seems to me you should be able to open these in QT Pro and export them in an editable format like DV, uncompressed, etc... edit them then recompress.
But keep in mind that theory states there will be a digital generation loss doing this. Better to have kept the media or tapes, but then the loss may be OK...
You should join our users group in Denver! http://www.dfcpug.org Next meeting is this coming Tuesday.
Jerry

Similar Messages

Can't Import Quicktime files

Hello Everyone, This is like the 5th forum where I have posted this problem. Nobody knew an awnser to it.
When I try to import a Quicktime movie Into my After Effects the program Crashes. When I import an .Avi file it works fine.
This is a link to another forum:
http://forums.creativecow.net/thread/202/879809#879809
These are the things that I have tried:
-Downloaded another Quicktime version (3 times,I'm now on version 7.3)
-Reinstalled After Effects
-Installed it on another Disk/Partition
-Installed VLC media player (Because A good guy told me)
-Posted it on 5... No, 6 forums ;)
I hope you guys can help me.
Thank you very much
(screens)
http://www.moviecrew.nl/screens/Import%20video.jpg
http://www.moviecrew.nl/screens/Preview%20IN%20Ae.jpg
http://www.moviecrew.nl/screens/Play%20video.jpg
http://www.moviecrew.nl/screens/VLC%20downloaded.jpg (downloaded VLC ;))

[email protected] wrote:
> Hello Everyone, This is like the 5th forum where I have posted this problem. Nobody knew an awnser to it.
>
> When I try to import a Quicktime movie Into my After Effects the program Crashes. When I import an .Avi file it works fine.
>
> This is a link to another forum:
>
>
> These are the things that I have tried:
> -Downloaded another Quicktime version (3 times,I'm now on version 7.3)
> -Reinstalled After Effects
> -Installed it on another Disk/Partition
> -Installed VLC media player (Because A good guy told me)
> -Posted it on 5... No, 6 forums ;)
>
> I hope you guys can help me.
>
> Thank you very much
>
Simply having a MOV extension does not mean its just a quicktime movie.
Think of the extension like you would a gum wrapper. Lots of different
flavors of gum could be inside that wrapper. Quite likely you have a MOV
file in a flavor that AE simply does not like.

Can't import quicktime

The problem is happening on a PC with Windows 8.1. I can't import quicktime files into my After Effects CC 2014. Some files work, some does not work. I am getting this error:
After Effects error: file 'test.mov' can't be imported -- this '.mov' file is damaged or unsuported or damaged.
I have quicktime installed. I can't even import quicktime movies from my phone. Please help. THANKS!

That should be working. Something is awry on your machine.
Try this: troubleshooting QuickTime errors with After Effects

Can't import .AVI files in QuickTime Player

Hi there - Okay,,I'm a real Noob,,but I can't understand why I can't import .AVI files when apparently I should be able to. I have just purchased a Toshiba Camelio S20 and have taken some test movie shots and when I've tried to open them in iMovie or just open them in finder I get the following message
'The document “IMAG0002.AVI” could not be opened. The movie is not in a format that QuickTime Player understands.'
The Quicktime player I'm using is Version 10 and I'm working with MacOS X V 10.6.4.
What am I doing wrong ?
Pls help ?
Thanx

Heya - thank you so much - have done what you suggested and now i can import the clips into iMovie - no problem!
But,,,,and,,golly,,don't know if I'm being really really stupid but by converting to DV or MOV I lose all audio from any of the clips that I'm importing...
Can you help some more - sore to be pain in buttocks !! Am completely new to iMovie so am struggling a bit!!!
Thanking you

I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer. Any help is appreciated.

Russ and Luis,
I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in. Still no luck. I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support This is where it is supposed to be as far as I can figure out.
Another piece of the puzzle is that footage shot on a Canon C300 in 2013 and I reimported today and it DOES import into FCP10.1.3. Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX. The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
Any ideas? (screen shots below)
Thanks.
Peace, Huey
FYI Here is what Canon says
"There is another trick that works sometimes though. Try uninstalling the plugin and XF Utility. Then, install the latest XF Utility, followed by the plugin, in that order."
I did do this but no results. Otherwise they say I need to wait for a new plugin.
Here's 2014 Canon C300 files does NOT import to FCPX
Here's 2013 Canon C300 files does import into FCPX. I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that.

Can't import quicktime movie made from Keynote into iMovie media browser

I've created a file in Keynote, exported it to quicktime and would like to import into iMovie. iMovie keeps giving me this error message: Unknown error: the file could not be imported. Can someone help?

Rarely am I able to solve my own problems, regardless of how much effort. But I did figure this one out, simply by trial and error. *To recap... I have created a sample slide show to use as a test run through Keynote (to get the best builds and transitions), to Quicktime Pro, into iMovie (to marry the features of iMovie with the Keynote slides) then back to Quicktime Pro as a final product.* It was a crash course with all 3 applications, so a huge learning curve for me.
Quicktime Kirk helped me successfully with my first go round with this. But with so many nested compression windows and so many combinations of choices, I eventually forgot which settings had worked correctly to give me the quality resolution that I had achieved the first time.
So I posted several messages asking for some clue where I was going wrong. Kirk did get back to me, but told me that I needed to create my project entirely without iMovie. Very frustrating because I knew I had done it before with iMovie.
After literally hours of analyzing all the working files and duplicating the exact settings I used before, two scenarios were happening. One, the end product had terrible resolution quality (not even close to the first time around). *Or two, when trying to import the first Quicktime file created from Keynote into iMovie, there was an error message saying that the file could not be imported*.
So, I eventually decided to try the following:
*1. Create Keynote file*
*2. Export to QT with "Full Quality/Large" setting checked, and "Include Transparency" checked.*
*3. Open QT file to check quality. If acceptable, export this QT file as a QT file again using the highest quality settings - preferably ones that match the first export from Keynote to QT.*
*4. Open iMovie file and import this new QT file.*
*5. Do my thing with it.*
*6. Export (Share) iMovie file as a final QT file with "Full Quality" setting checked in the first pop-up compression window.*
This sequence proved to be successful with the same high quality resolution as the very first go round with it. I KNOW, though, that this wasn't the sequence I used the first time because I didn't do step 3.
I am just happy that I got what I needed. Now I can create my full presentation without worrying about the outcome in the end.
*Because I'm on a Mac, and the AIC default is used, my next feat is going to be identifying codec settings that are going to work both on Mac and PC (newer machines AND older machines).*
*So, does anyone have a clue how to do this?*

How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Can't import prores files into Premiere Pro CC or SpeedGrade CC

Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
I also can't export to DNxHD files to an MXF file either.
I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
Conflict?

I only have one account on the computer and it has Administrator priveleges. What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator"). I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator". Also, your answer still does not address the fact that I can't use my jog wheel.
Anyone else have some ideas?

I can't import raw files into lightroom

I have been using lightroom 4. I shoot with a nikon d300s. I recently used a nikon D610 and now it says preview not available. It also says the the raw images aren't able to import. So I recently upgraded to Lightroom 5 and it still says preview not available. I need some suggestions on how to import them.

I don't use nikon software. I just use lightroom. I just got lightroom 5. I tried to update to 5.3 but couldn't find the location where to find it.
Sent from Yahoo Mail on Android
From:"dj_paige" <[email protected]>
Date:Thu, Apr 23, 2015 at 10:22 AM
Subject:[Photoshop Lightroom] I can't import raw files into lightroom
I can't import raw files into lightroom
created by dj_paige in Photoshop Lightroom - View the full discussion
Do you have Lightroom 5.3 or higher?
Did you use Nikon software at any point on these photos?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7470470#7470470 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7470470#7470470
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't import any files or folders into Final Cut Pro 7.0.3 projects

I can't import any files or folders into Final Cut Pro 7.0.3 projects. When I select import and then either files or folders, I am able to navigate to the drive where the media is being stored, but then when I scroll to locate the files or folders the drive disappears. This problem began as an intermittent problem, but now I cannot import any files or folders. This problem started when I upgraded my operating system to Yosemite version 10.10.2 on my mid-2010 Mac Pro running with 16 GB of memory and an ATI Radeon HD 5770 1024 MB graphics card. Can anyone help me figure out and solve this serious problem? Thanks!

Then just drag the files/folders from your hard drive into FCP. Don't use the IMPORT option...just drag and drop.
The problem started when you installed an OS that doesn't support FCP 7. So if you want things to work smoothly, it's best to go back to an OS that did support FCP 7. Yosemite was written without taking FCP 7 functionality in mind, so it isn't fully functional. It might not do one thing for someone...but works for you in that respect. But then you can't do something else. The ways it doesn't work is always random. Or it might work great for some people, because they don't use functions that might no longer work....so they don't notice it.

Importing quicktime file into iMovie 11 resulting in distortion

After having trouble importing Quicktime files into iMovie hd6, I decided to buy iMovie 11. So the file imports without squishing the image into 4:3 as it did in iMovie hd6, but now the movie has a strange strobe like flashing that is not present in the original.
Any ideas?

See if you can open the file in QuickTIme PLayer. Click Command-I (or WINDOW/INSPECTOR) in QuickTime Player. Tell us what is listed by the word FORMAT:

Can't import XDCAM files(.mov) in Premiere for Windows

Hello.
I have some problem using XDCAM file in Premiere Pro.
Actually I captured the XDCAM file(.mov) from MovieRecorder, which is the ingest software for Mac..(http://www.softron.tv/products/movierecorder.html)
The XDCAM file is opened in Premiere Pro for Mac.
And I can play the file in QuickTime player for Win but I can't import the file in Premiere for Windows.
How can I import the XDCAM(.mov) recorded from Mac in Premiere Pro for Windows?
Do I have to install any codec or program?
Please let me know any advice.
Best regards,
Donnie Kim

carz999 wrote:
"This type of file is not supported, or the required codec is not installed."
Any suggestions would be appreaciated.
They have a website with support and a forum. https://www.videocopilot.net/products/action2/
Looks like cool stuff.
They list compatability with Premier Elements. Perhaps if you post a request there, you will find someone that has been down the road before you with the combination of the two products. They may also need to know if an adjustment is necessary for PrE11.
Good luck!

Can I import .MTS files from an external hard drive into Final Cut Pro X?

Can I import .MTS files from an external hard drive into Final Cut Pro X?

Luis Sequeira1 wrote:
b) Use an utility like Clipwrap or MPEG Streamclip to convert the mts file to a quicktime (mov) file
Luis,
Just to clarify one point…in order for Streamclip to convert the MTS I believe a plug-in like the AVCCAM QuickTime importer from Panasonic needs to be installed. (Credit David McClain over at the FCS boards for that info.)
Russ

How can i import mpeg files into iMovie?

how can i import mpeg files into iMovie?

Where are your MPEG stored?
I have hundreds of old MPEGs stored in my nexternal drive, but unfortunatly i was not able import them into iMovie. I did the following trick: I created a new set of a folder and subfolder and called it "Virtual_CAM/DCIM" and saved it on my desktop. Then went to Disk Utilities>File Menue>New>Disk Image from Folder. Then selected the folder on my desktop and clicked enter. I moved the .dmg file to my external (or just keep it on your desktop). I clicked on the .dmg file. It shoud be visible on the Finder. Open your Imovie and import as you do from your camera.

Can't Import Quicktime Files Created in FCP

Similar Messages

Maybe you are looking for