Can't include a particular recipient in text.
I purchased my first iPhone (4-8gb) 2 days ago and have encounted a strange issue - at least I think it's strange.
I can send a text to multiple recipients with no problems as long as my second son is NOT included, if I include him the message fails. I can send a text to him alone with no problems.
Does anyone have any ideas as to how I can "fix" this?
Thanks,
Pam
ok - I give up, now I can't even see my last two replies to this post. I guess I'll just have to wait until Monday and return to my local Verizon store and see if they can help. I purchased the phone at theBoca Park Verizon store in Las Vegas and my sales rep was Sandy - she was absolutely terrific, no kidding, she was helpful, knowledgable and patient.
I did try deleting the offending contact and re-entering with just the phone number - group message failed.
tried deleting the offending contact again and sent a group text by selecting two "good" contacts from my contact list and typing in the phone number of the offending contact directly into the "To" field with the same result - group message failed.
I am so very disappointed as this is an important feature for me.
Thanks to those who tried to help.
Have a great Easter everyone
Similar Messages
-
(How) Can I include Long Texts in Reports or Queries?
Hello,
We need to send our vendors their contract details including some of the long texts data.
So far we were sending excel spreadsheets to the vendors without the long texts. Is there some way we can start sending the spreadsheets to our vendors adding few extra columns for the long texts. Some of the vendors contracts have 20+ lines of data in the long texts.
Are there any better or easier ways than excel spreadsheets?
Is any kind of query development possible where long texts can be included?
Appreciate your time and answers.
Fred.Sorry friends for not communicating my requirement clearly. I am aware of the functions to retrieve the long texts data for purchase orders/contracts.
I need some help in downloading the data to excel sheets. I believe there are restrictions in the number of characters that can be accomodated in a excel column, so I am not sure if very long texts (say >500 lines & 72 chars each) can be wrapped around within a excel column.
Also can a query be written to extract long texts, or can long texts, >500 lines & 72 chars each, be displayed using ALVs?
Thanks a lot for your time. Appreciate your inputs.
Below is a sample of how the report needs to look.
Contract Number Vendor Long Text1 Long Text2
0000000001 ABC Firm Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC'
Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC'
Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC'
Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC'
0000000002 XYZ Firm Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ'
Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ'
Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ'
Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' -
How can I include text lines in Service Invoice?
Dear Experts,
I realized unlike Item Invoice, Service Invoice does not have the "Type" column for me to include Text into the document?
How can I include a free text into 1 row of the Service Invoice? without any GL Account, Qty and Total input?
Thanks!
Warmest Regards,
ChinhoHi Chinho,
Try to use the Description(100 characters) Field
but if you want to add more characters at row level in single field.
Try to add a UDF(500 Characters) on Marketing Documents.
Regards,
Madhan. -
Can we include a table data inbetween a paragraph using a text module
can we include a table data inbetween a paragraph using a text module or standard text.
For eg:
This is the output for purchase order &itab-ebeln& and this purchase order &itab-ebeln& has been released.
I want the purchase order number to be placed inbetween these line as shown above. Can anyone help me on how to do this.
Regards,
Rose.
Edited by: camila phyrose on Feb 18, 2008 11:11 AMHi,
You can do this in the Text module by adding the fields with the 'Insert field' icon (just as you would with a text element). The Text module doesn't understand their content, but at runtime provided your smartform does this will work.
Regards,
Nick -
Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
3° Ive created buttons linking pages..
- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'
- what should i do?
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.stlbbl4u wrote:
Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
You should setup Object Styles - these can also include Paragarph Styles that can be triggered when the Style is selected.
http://help.adobe.com/en_US/indesign/cs/using/WS5CEDB81A-0011-4dc9-9DE8-AC7AD4C80076a.html
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
I'm not sure what you mean - I don't do files with Animations
3° Ive created buttons linking pages..- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
Does it work properly when you export it to the finished file?
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'- what should i do?
InDesign won't link directly to youtube videos. I think your best bet would be to use Downloader to download the video and embed them directly in Indesign.
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.
You can look up how to embed a SWF file into your HTML - but it depends what you mean by "online" there's a dozen ways to get a file "online". -
How can I add a new message(custom text message) to the holiday approval em
How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
TIAThe answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include? -
How can I include a carriage return in a expression
How can I include a carriage return in a expression between text strings eg
Expression 1 = Text1 & text2 & text3 & text4
I need to display it as below
Text1
Text2
Text3
Text4
adjusting the box the size doesn’t work as the text strings are variable lengthsMessage Edited by Ryan.S on 01-04-2007 08:17 PM
Ryan Shi
National Instruments
Attachments:
untitled.JPG 37 KB -
How can i include a vi to help me save all the measurement from 10 to 100000
hi, how can i include a vi that will store my data or save them for each of the step increament , from the starting measurment 10hz to 10000000hz to the last. pls help
good
Attachments:
saving vi.vi 53 KBHi ifyo,
I couldn't run your VI as i dont have all the components of it. But i have attached herewith a vi which will show you how to save continuously acquired data into a text file. The explanations are added on the block digaram. Let me know if this doesn't help and you need more information.
Regards,
Nitzz
(Give Kudos to good Answers, Mark it as a Solution if your problem is Solved)
Attachments:
Untitled 2.vi 9 KB -
How can i include Services and Bindung in a generated WSDL file?
Hi,
i what to use a generated wsdl file from an erp system, to build a web service client with WSDL2Java (org.apache.axis.wsdl.WSDL2Java).
I noticed, that services an bindings are missing, also a policy is included.
How can i include services and bindings in the wsdl and exclude the policy?
Thanks!well, I assume you have SOAMANAGER.
choose your service & "Apply Selection" (very useless button btw)
select a binding in the dropdown box or create on if you do not have one yet
Click button "Show WSDL options" (actually they do not really look like buttons in WD; call it yellow blot)
Some extra config area is thrown onto your screen (without any sense for usability or design); Change the radio button for WSDL format from "WS policy" to "Standard"; make sure the first radio button group is on "True" for monolithic
Now click the link (why is this a link and no blot?) called "Display selected bindings WSDL URL"
an extra text field is again thrown onto your screen somwhere between the dropdown and the WSDL option config area containing an URL (get out your glasses if you don't see the sub-10pt-letters)
hope it helps,
anton -
Can I add a link into a text box with in-browser editing
Is it possible to set up a text box with some text and subsequently change the text to include a hyperlink with in-browser editing with a site hosted on a third party server?
Thanks/RichardHi Richard,
You can add the the link to the text using the Hyperlink manager at the top. You can link it with any internal or external URL.
Regards,
Aish -
How can I initiate a transport of Standard Text over to another client
HI,
I need to re-create all the customized standard text in our new ECC6.0 box. Afte creation, I want to transport it to the QA for testing and eventually to the new ECC 6.0 production.
While creating the text, it does not trigger any transport request.
How can I initiate the Transport request?
I had explored and found that it is also possible to upload to the destination. I would prefer the Transport method.
Can someone advice?
Thanks
ThanksThe program name is RSTXTRAN. run from SE38
detailed documentation is here.
Symptom
This is a brief guide to RSTXTRAN
More Terms
RSTXTRAN, Transport of SAPscript Texts, Standard Texts
Cause and Prerequisites
Solution
Basic Background
You want to transport SAPscript Texts from a source system to the target
system. You can do it in different ways. If you want to copy texts within a
system from one client to the other you can execute the report RSTXTCPY. In
other cases, i.e. transporting the texts between the different systems, you
can use the report RSTXTRAN. This report (RSTXTRAN) itself does not perform
any transporting but is used to prepare a Transport Task (TT). Having
prepared the TT with RSTXTRAN you have then to release it and the
corresponding Transport Request (TR) in a normal way (e.g. with an
assistance of Customizing Organizer - se10).
Please note the Type of Transport Requests (WBO or Customizing) depends on
the system settings.
Working with RSTXTRAN
1. Execute the report RSTXTRAN (e.g. within the transaction se38)
2. On the selection screen appeared you may specify:
2.1. Name of the Transport Task (TT). Make sure you specify the
Transport TASK number, NOT the Transport REQUEST ! You may leave this
field empty if you did not create to this moment the appropriate TT.
Later you will be able to create it within the report.
2.2. Text Key. This composite key consists of four fields: Object,
Name, Id and Language. You may specify these fields also generic
(caution: until Rel.4.6A you have to specify \'*\' if you need a generic
selection; leaving a field empty will cause a search for the blank
field that usually returns no results!). This key serves as
preliminary search restriction only and does NOT mean all the texts
which satisfied the specified key must be included into TT.
3. Having specified some fields on the selection screen you can go
further with \'Execute\'(F8).
4. On the screen appeared you will see the list of texts that satisfy the
specified restrictions. By default all the texts are selected for
including in the TT. You can deselect all the texts or select all of
them again using the function \'deselect all\' or \'select all\'
respectfully. Certainly you may select the texts individually as well.
In order to proceed you have to use function code \'continue\' clicking
on the icon \'OK\' or pressing the button \'ENTER\'.
5. At this stage you get another list of texts that already exactly
defines the list of texts to be included in a Transport Task. You
cannot change this list any more. If you want to change something (add
new texts or exclude any of them) you have to go one step back (F3)
and update your selection. You can now include this list to the TT by
pressing the button in the toolbar \'Transfer texts to correction
request\' and confirming the action.
6. If you have left the field \'Name of Correction\' empty on the first
selection screen you will then be asked to provide the Transport
Request number. You can select it from already existed ones or create
a new one. However if you specify anything(!) in the field \'Name of
correction\' on the first selection screen and the specified TT does
NOT exist (generic input is not allowed there) you will get an error
message \'Request/Task xxx does not exist\' (TR 806). In that case
please go to the first screen and fill out this field correctly, or
leave it completely empty. Then repeat the selection again.
7. When you have performed all the steps properly you get a message the
selected texts were included into TT. Now you can leave the report and
release the appropriate Transport Task/Request in Customizing
Organizer (se10).
Edited by: Henry Hsu on Nov 27, 2010 3:37 AM -
Can we include the customize results in the Open Script Result Summary
hi all
can we include the customize results in the Open Script Result Summary if we include what is the code.
customize result i mean
Scenario: i am checking the concurrent job is completed successfully or not
result:Concurrent Job Completed Successfully
i am want to see the above result in the Open Script Result Summary can anybody help me on this.You want to launch a concurrent program, right? And to check the result, right?
Is that for a functional test script or a load test script?
Let's say it's functional. You have basically 2 options:
* Do it separately. You create a scenario which launches the program and you write the RequestID in a file, then you create a second script which read the file and then go to the concurrent processing dashboard and search for the RequestID and check the status. You have to desynchronize the 2 scripts. Launch the first one. And then, later on, launch the 2nd one when you are sure the program is finish.
* You do it in one single script and you wait til you get the status. See the code below I've written for a customer (for a POC);
This is not the best option in my opinion because you don't know how long you need to wait and therefore you block other scripts execution... But the customer wanted it like this.
do {
delay(5000);
forms
.textField(
"//forms:textField[(@name='JOBS_PHASE_0')]")
.storeAttribute("Batch_Phase", "text");
info("Phase du traitement: {{Batch_Phase}}");
forms
.button(56,
"//forms:button[(@name='JOBS_REFRESH_0')]")
.click();
} while ((eval("{{Batch_Phase}}").equals("Running")));
But wait, after having written all the stuff above, maybe you just want to check the toolbar status, is that correct?
Normally, OpenScript automatically insert a "status bar test".
Then I guess there's a default time-out (30 or 60 sec I think), you can maybe change to adapt.
Well, looping could also be an option as i describe above.
Let me know
JB -
How can i change the particular node color in Jtree?
I have constructed the tree.i dont know how to set the color for the particular node then how can i change the particular node icon depends on some conditions like if we will give the input whether it is available in jtree that node icon only changed.Anyone please help me as soon as possible.
hi,
i saw that tutorial.from that book i dont get the particular node cell renderer.i got a cell renderer for tree only.i attached my code in this mail.pls see and help me if u will do
mport pack.Prop;
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.awt.Container;
import java.awt.Font;
import java.io.BufferedReader;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.Properties;
import java.util.Set;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.Icon;
import javax.swing.ImageIcon;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JScrollPane;
import javax.swing.JTree;
import javax.swing.UIManager;
import javax.swing.text.Position;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeCellRenderer;
import javax.swing.tree.DefaultTreeModel;
import javax.swing.tree.MutableTreeNode;
import javax.swing.tree.TreeCellRenderer;
import javax.swing.tree.TreePath;
public class ReadProperty3 extends JFrame{
String str,key;
static JTree tree;
static Vector v;
StringTokenizer st;
static DefaultMutableTreeNode root;
DefaultMutableTreeNode t;
public Object[] o;
public static void main(String[] args) throws IOException {
ReadProperty3 r = new ReadProperty3();
Prop p=new Prop();
JFrame f=new JFrame();
p.show();
Object[] o=v.toArray();
int startRow = 0;
String prefix =p.s;
TreePath path = tree.getNextMatch(prefix, startRow, Position.Bias.Forward);
//if(prefix.equals(root.getChildAt(0).toString()))
if(prefix.equals("2000"))
System.out.println("Node 2000 found");
else if(prefix.equals("3000"))
System.out.println("Node 3000 found");
else if(prefix.equals("4000"))
System.out.println("Node 4000 found");
else
System.out.println("Node not found");
for(int i=0;i<v.size();i++)
//((DefaultTreeModel)tree.getModel()).reload();
DefaultTreeCellRenderer ren=(DefaultTreeCellRenderer)tree.getCellRenderer();
Icon openIcon = new ImageIcon("C:/apache-tomcat-5.5.12/webapps/jsp-examples/images/execute.gif");
Icon closedIcon = new ImageIcon("C:/apache-tomcat-5.5.12/webapps/jsp-examples/images/execute.gif");
Icon leafIcon = new ImageIcon("C:/apache-tomcat-5.5.12/webapps/jsp-examples/images/read.gif");
if(o[0].equals(p.s))
ren.setBackgroundSelectionColor(Color.MAGENTA);
ren.setBackgroundNonSelectionColor(Color.YELLOW);
//ren.setTextSelectionColor(Color.YELLOW);
//ren.setTextNonSelectionColor(Color.BLUE);
ren.setClosedIcon(closedIcon);
ren.setFont(new Font("Impact",Font.ITALIC,14));
else if(o[1].equals(p.s))
ren.setLeafIcon(leafIcon);
ren.setFont(new Font("Impact",Font.ITALIC,10));
UIManager.put("Tree.leafIcon", leafIcon);
else if(o[2].equals(p.s))
ren.setOpenIcon(openIcon);
ren.setFont(new Font("Dialog",Font.BOLD,9));
public ReadProperty3(){
super("JTree With Properties");
try{
int c = 0;
while(c == 0){
c = 1;
BufferedReader bf = new BufferedReader(new InputStreamReader(System.in));
System.out.print("Enter file name which has properties extension :");
str = bf.readLine();
File f = new File(str + ".properties");
if(f.exists()){
Properties pro = new Properties();
FileInputStream in = new FileInputStream(f);
pro.load(in);
System.out.println("Key: " + pro.keySet());
System.out.print("Enter Key : ");
key = bf.readLine();
String p = pro.getProperty(key);
st = new StringTokenizer(p,"=,");
root=new DefaultMutableTreeNode(key);
v=new Vector();
while(st.hasMoreTokens())
String val=st.nextToken();
v.add(val);
o=v.toArray();
System.out.println(val);
t=new DefaultMutableTreeNode(val);
root.add(t);
tree=new JTree(root);
tree.setEditable(true);
JScrollPane jp=new JScrollPane(tree);
// tree.setCellRenderer(new CellRenderer());
Container content=getContentPane();
content.add(jp,BorderLayout.CENTER);
setSize(250,275);
setVisible(true);
addWindowListener(new ExitListener());
else{
c = 0;
System.out.println("File not found!");
catch(IOException e){
System.out.println(e.getMessage());
} -
How can we include the property value into the News RSS?
We have defined object property u201CDepartmentu201D that is used in News XML creating form. How can we include the property value into the News RSS (set value of the particular RSS XML tag)?
We have solved the issue with NWDS
-
I don't have Internet on my iPhone 4 because I have go phone. Will on the next update fix it so where I can send and get picture in a text message?
What worked before doesn't matter. AT&T does not permit the use of pre-paid SIMs in the iPhone, including Go Phone SIMs. They will disable data on the account if they detect one being used.
The fact is, you can't do that.
Maybe you are looking for
-
Genius Mixes Not Working- On iTunes on Windows 7- 64 bit
I built my iTunes library from my entire collection- of over 10,000 songs (more than 64 gigabytes)- and all songs are organized through iTunes Media folder- all have the proper information required for identification, match etc. These include 90s son
-
Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong
-
Fatal Error with Java ME Device Manager and SDK Updates
I recently installed the Java ME 3 EA SDK Platform which looks promising. Everything seem to work fine. In the process of new updates and the desire to remove some older versions of Java, I installed a new Java versions (1.6.0_11) and removed some ol
-
Concise HOWTO on O/R storage?
Hello all, I am trying (and trying, and trying...) to store elements of an XML document separately for faster access via Index.I am aware of the fact that I can store VARRAYs as a separate table, but it just won't work out for me. After many hours of
-
PJC and database access through JDBC
Hello, I'm trying to access to the database through a PJC via JDBC. conn = DriverManager.getConnection ("jdbc:oracle:thin:@machine:1521:XE", "user", "pwd");It works fine on a XE database, but fails on another XE one: Oracle JInitiator: Version 1.3.1.