CAN'T INSTALL AIRPORT 561 ON ML 10.8

I got the old one Airport 802.11 b/g
can't install the app airport 561 on ML 10.8

That is correct. Neither version 5.6 or 5.6.1 can be installed. One option is to use Pacifist to extract the AirPort Utility directly from the disk image (.DMG) file. Once installed this way it runs fine on OS X Mountain Lion.

Similar Messages

  • How can i install airport express A 1264 on os x 10.9.2

    How can i install Airport Express A 1264 on os x 10.9.2

    Hello chawich
    All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
    AirPort Utility software and firmware downloads
    https://support.apple.com/kb/HT1998
    Regards,
    -Norm G.

  • Can't install Airport Utility 5.6 in OSX 10.7.5

    I have a 2005 Airport Extreme that I manage using an iMac running Mac OSX 10.7.5. I recently tried to access my airport to check the IP address. Airport Utility could not access the Airport and told me that I needed to install Airport Utility 5.6 to access the Airport. I installed AU 5.6 and tried to access the Airport, but this time was told that this version of AU does not work with Mac OSX 10.7.5. So I downloaded AU 6.2. On this third attempt to access my Airport, I was told that this version of AU does not work with this Airport  and I need to install version 5.6. I'm stuck. Does anyone have any suggestions (other than buying a new Airport, that is).
    Thanks for the help,
    Paul

    Make sure you download it from this URL
    AirPort Utility 5.6 for Mac OS X Lion
    It should install without any difficulty.
    AU 5.6.1 is for the latest AirPort Base Stations for systems running Snow Leopard.
    NB from the following
    AirPort Base Station: How to set up and configure an 802.11g AirPort Extreme Base Station or AirPort Express in OS X Lion
    If you are using OS X Lion and wish to set up or configure an older 802.11g AirPort Extreme Base Station, or 802.11g AirPort Express, manually download and install AirPort Utility 5.6. AirPort Utility 5.6 can be used to configure earlier 802.11g AirPort Extreme Base Station, and AirPort Express; it can also be used for 802.11n AirPort base stations.
    To obtain and use AirPort Utility 5.6:
    Go to http://support.apple.com/downloads/.
    Search for AirPort Utility 5.6 and download it.
    Allow AirPort Utility 5.6 to install.
    Open AirPort Utility from the /Applications/Utilities folder.
    Note: If you are configuring or setting up a newer AirPort Base Stations that support 802.11n, you should use AirPort Utility 1.0 for iOS or AirPort Utility 6.0 for OS X Lion, or later.
    You can have both AirPort Utility 6.0 and 5.6 in the /Applications/Utilities folder.
    AirPort Utility 5.6 will appear in the /Applications/Utility folder as "AirPort Utility 5.6"
    AirPort Utility 6.0 will appear as "AirPort Utility"

  • Can't install AirPort Express Software

    Help!
    Trying to install AirPort Express Software in my computer. It's an iMac 1.25 GHz PowerPC G4. It was installed with OS X 10.3 with updates through 10.3.9. I recently installed Leopard 10.5 and it is now updated to version 10.5.1. But, when I try to install the software for my new AirPort Express, it says "you cannot install AirPort on this volume. The version of Mac OS X on this volume is not supported." Huh? AirPort express says it can be used by computers working on OS X 10.4 or later. What might be my problem? THANKS!
    Terry

    Duane,
    Thank you for your speedy response!!!!
    When I open the AirPort Utility.app, a window opens called AirPort Utility, the twirly/stopwatch icon goes into motion next to the words"Discovering Base Stations." After this happens for some seconds, these words appear...
    "AirPort Utility was unable to find any AirPort base stations. Please make sure the AirPort base station you want to set up is plugged in and in range of your computer, and then click rescan to try again."
    My express is plugged in five feet from my computer. What to do....?
    Many thanks!
    Terry

  • Can't install AirPort Express Assistant because I already have Utilities

    Just having some annoying trouble here.
    I have a MacBook Pro that came installed with AirPort Utilities, and it has the latest version.
    I bought an AirPort Express so I could stream music to my speakers with AirTunes. I'm not hooking an ethernet cable to the airport, because my wireless already works fine in my house.
    I need to install AirPort Express Assistant in order to set up the network between the express and my computer, but I can't even use the CD it came with because once I get to the part to select where I want to save it, it says "this computer already has a more recent version of AirPort on it etc..." However, I only have Utilities, not the assistant.
    With the Express plugged in, I go to Utilities and it doesn't pick anything up, which makes sense. So basically, what can I do?
    I tried deleting Utilities off my computer so I could just install the whole CD but even that did nothing.
    Thanks.

    Your version of Snow Leopard already had the latest version of AirPort Utility 5.5.1, which is the version that you should use to configure the AirPort Express.
    The disk which came with the AirPort Express was produced some time ago and the version of AirPort Utility on the disk is out of date.
    Not sure what you mean by Assistant. There is a guided setup process in AirPort Utility that is initiated when you click the Continue button. That may be what you are thinking of.
    You made a mistake by deleting AirPort Utility 5.5.1 from your computer. You should download AirPort Utility 5.5.1 and install it so that you can configure your AirPort Express.
    http://support.apple.com/kb/DL955

  • Can't install AirPort Express, and unit is flashing amber

    Hi,
    I've just bought an Airport Express unit, with the aim of playing iTunes remotely (I have a separate wireless connection to the net). I have two problems:
    1) When I try to install the Airport Express software provided, the setup tells me that I have a later version of iTunes and cannot install Airport Express. Does that mean iTunes v7.0 (which I am using) already contains Airport Express?
    2)My Airport Express unit is flashing amber. Resetting the unit makes no difference. I suspect this is due to the problem of 1) but am really stuck on how to progress!
    many thanks in advance!
    Mike

    Duane,
    Thank you for your speedy response!!!!
    When I open the AirPort Utility.app, a window opens called AirPort Utility, the twirly/stopwatch icon goes into motion next to the words"Discovering Base Stations." After this happens for some seconds, these words appear...
    "AirPort Utility was unable to find any AirPort base stations. Please make sure the AirPort base station you want to set up is plugged in and in range of your computer, and then click rescan to try again."
    My express is plugged in five feet from my computer. What to do....?
    Many thanks!
    Terry

  • Can't install Airport 5.0!

    I got two Airport Extremes. Airport 5.0 will not install on my laptop. It says something like "no application to open program" or something like that. I tried "open with disk utility" just on a lark and now it defaults to that and I can't find anything else to start the install. The same disk works on my iMac at work. I can't for the life of me figure out what happened that my MacBook won't properly install this program. Am I missing a program? Is something in the wrong place?

    Insert your computer's original disks or any Mac OS X 10.4 installation disk and look for a copy of the Installer on that disk; if you find it, you can use it to open and install the package. If not, use Pacifist to extract the Installer from the Tiger installation disks, and then run the combo updater for your version of Mac OS X. It is also possible to use Pacifist to install the AirPort software directly, but this shouldn't be done unless you don't have the disks, as any preinstallation and postinstallation scripts may not be run, and the receipt for the installation won't be created.
    (20312)

  • Can't install airport express

    Have a new intel imac running OS X 10.5.2. I've established a wireless network using built-in wireless cards to my powerbook G4 running OS x 10.3.9. This network runs fine, but I'm trying to extend the range of the network using an airport express to make a wireless distribution system (WDS). When I plug the airport express in it flashes amber as expected, but when I run the airport utility on the iMac the airport express is not found. What's wrong?

    If I follow correctly - you are using your iMac to create a wireless network? In other words, you are not using an Airport Base Station but instead you are using your iMac to do this job, correct?
    If so, you cannot create a WDS. Main and remote base stations in a WDS must be Airport Extreme Base Stations (any model) or Airport Express devices. You cannot use a Mac as one of the base stations.

  • Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

    trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

    David Why? wrote:
    ... How do you configure older Airports in OS X 10.7.5??
    Use the technique described in this thread: I can't install airport utility 5.6
    Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
    I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
    Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
    Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

  • Error Installing Airport Utility on OSX 10.8.2

    I can't install Airport Utility on OSX 10.8.2 so that I can install Airport Extreme.  Error message says the version of Mac OS X is not supported.  What can I do? Easily!

    You have to install AirPort Utility from the disc if you're using Windows on your PC, so that's because Apple doesn't say it. Also, you could have bought an old AirPort Extreme that includes an older AirPort version for another Mac OS X

  • Installing Airport Express

    I can't install Airport Express on my Mac. It says "you cannot install Airport on this volume. The Version of Mac OSX on this volume is not supported" The Airport disc says 10.4 or higher is required and I'm running 10.5.6.

    Mac OS X 10.5.6 includes the software for it. You don't need to and shouldn't install anything.
    (41417)

  • Can't find AirPort 4.2 for Mac OS X 10.4.x software for Intel Mac Book

    I have an Intel Mac Book and recently picked up a graphite AirPort on eBay without software. I installed the Installer updaters and Mac OSX 1.4.9 Combo update. I can not install AirPort software 2.0 - the error says I can not install on this machine. I went on the Apple site to find AirPort 4.2 for Mac OS X 10.4.x and can not locate the download. Any ideas?

    Hi Duane!
    Thank you for welcoming me and yur information. I now see that I have the software, but I'm still having issues. I can't get the airport to see the internet. It knows there is an internet connection in the Network Assistant, but fails on the diagnostic. Further, after a restart, the Admin Utility does not list the IP address I the window.
    I wondered if this was because of the software version update becausse it said it fixes an issue with Comcast (my ISP).
    I wanted to use the Admin Utility to configure the Airport from scratch, but how can I if the base station is not in the list?

  • HT1515 Just installed Airport Express on Mac 10.6.8  Can't see base station.  Hard Reset the Airport.  Rebooted machine.  How can I tell if this is a Mac problem or Airport Express Problem?

    I have a Mac 10.6.8.  Just installed Airport Express.  I can't see any base stations.  I did a hard reset on the Airport Express, turned off all devices,  turned them back on.   I see plenty of Airport networks in the neighborhood.  How can I tell if I have a Mac problem or an Airport Express problem?  Airport Express blinks Amber. 

    Obviously,  I'm still using ethernet to be able to reply to this.
    Alright, use the same ethernet cable to plug directly into the airport express. This will FORCE the airport utility to now see it regardless of weak signals & interference. You can set it up that way.
    BTW, what is the original intent on the express?

  • How many airport express can  i install in my home to stream music?

    I plan to buy many airport express in my new Home!
    how many airport express can  i install in my home to stream music?
    Jimmy

    jimmyflo wrote:
    I plan to buy many airport express in my new Home!
    how many airport express can  i install in my home to stream music?
    Theoretically as much as you want but there are technical limitations about the usable bandwidth in the wireless or by the used access point.
    All participants (stations) in a wireless network share the available bandwhith equally and therefore a point will get reached where the throughput in the network became insufficient to stream music.
    Also some routers limit the number of stations could get connected. For instance Apples Airport Extreme have a limit of 50 connected clients and the AP-Express (if used as access point) a limit of 10 simultaneous connections.
    Lupunus

  • I have installed airport express and it lights steady green. But when I use the airport tool, nothing can be found.

    I have installed airport express on my Window 7 and had problem to find the airport express.
    I solved the problem by turning off my AVG firewall and  the airport tool found the airport express and it went steady green.
    I then turned on the AVG firewall again and it continues ok.
    But when I turn off and restarted my laptop I have to follow the same procedure.
    The AVG firewall is set to All Allowed for the airport express.
    Is there anybody out there that can give assistance to solve this problem?

    Hi,
    I solved the problem myself by updating the Wi-fi driver.
    Now it works perfect.

Maybe you are looking for

  • KT6 Delta - Random freezes and LAN Issues

    Just built a new PC, installed Win XP, installed all the drivers etc. I get random freezes - as in the machine will just stop responding totally.  I could run for an hour before a freeze, other times its frozen before I've even logged in. Also the LA

  • Error in running Reports  in Report Bulider 9i

    Whenever I try to run a report in Reports Builder (9i) , I get the following error message. REP-0069 Internal error REP-58102 error sending the request "http://hostname:3000/rwWarmUp.jsp to internal web server "java.net.connectException:Connection Re

  • How to change exchange rate in VA02

    Dear Experts We have sales order which is having around 5 line item and in that 1st line item alone has been invoiced in January and later items still not invoiced In the month of February, the invoice for 1st line item has been cancelled , so to avo

  • Is it possible to remove user interaction in a eventListener ?

    Hi, I am working on two scripts that both need to deal with the user interaction. This following script works just fine. The only matter is that Indesign alerts me that the script prevented the UI dialog from opening. What if I don't want any alert ?

  • Different colors in alv cell

    Hello experts, I use reuse_Alv for displaying my alv. I use this command to color single cells background color   LOOP AT gt_mytab  INTO ls_mytab.     ld_index = sy-tabix.     IF ls_mytab-expstatus = '0000'.       wa_cellcolor-fname = 'EXPSTATUS'.