Can't install final cut pro 5.0/erased my old final cut

I just got final cut studio and the option for installing final cut pro is inaccessible. When it finished installing (said it was successful), my old version of final cut was gone and the new version was not installed.
What do I do because when I go to reinstall it, it wont let me install it (says skip)?

Hi Jerry,
Thank you for your quick response. I called the hotline and it is closed until 6am tomorrow. Below are my specs:
Hardware Overview:
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1.35 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.12 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: SG013CYSHSE
Do you know how I find out what kind of graphics card that I have?
thanks again,
cy

Similar Messages

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5

Hi,
I have a client with both of these installed on the same machine (running 10.4.6).
When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message:
"File Error: A file of this name already exists" "OK"
Clicking "OK" closes the app.
Any idea:
1. What the file in question is?
2. Can it be deleted to let the app run?
3. Can Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5 be used on the same machine?
I'll post this on the Final Cut Express HD 3.5 thread too (but with the order reversed).

What you did was not enough to delete the preferences properly.
This article tells you how. It is for FCE2 but works the same for FCE3 so I assume it is also OK for FCE 3.5:-
http://docs.info.apple.com/article.html?artnum=93690
It's simple to do so try it before reinstalling etc. - You should completely uninstall before reinstalling:-
http://docs.info.apple.com/article.html?artnum=301182
Ian.

I can not install windows 8 pro on my mac , the disc don't allowed be partition

I can not install windows 8 pro because of the hard-disc dont allowed to partition , I used the bootcamp but always the fault pop coming up .

Hi there soranfromorebro,
I would recommend taking a look at the article below.
Boot Camp: "We couldn't create a new partition or locate an existing one" alert during Windows 8 install
http://support.apple.com/kb/ts4560
-Griff W.

Can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid".

Hi, anyone know. can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid". any compatibility issues?

"In addition to TRIM, I just stumbled on this discussion. One of the posters is having some odd difficulties with that combination."
Yup and that's why I've avoided any 3rd party SSDs.
I only deal with:
http://eshop.macsales.com/shop/SSD/OWC
I've done 6 so far and no problems at all; formatting, installing nothing. Total no brainer. I did have a small formatting problem on my last one but I called them and solved the problem before the guy got on the phone. He immediately offered a return sticker (RMA) but I didn't need it and the MBP is running fine.

Can't install Acrobat 9 Pro on Windows XP Home Ed V2002 SP3

Newbie hozer can't install Acrobat 9 Pro on Windows XP Home Ed V2002 SP4. At end of install via CD it hangs restarting Print Spooler (spooler) and Windows Image Acquisition (stisvc) services, err 1920, and all I can do is click Cancel and it uninstalls the whole dad gum thing. I tried kb.adobe.com/cps/403/kb403613.html. Not fixing it.
If I could change the permissions on those services maybe that would help but I can't do it, I don't have a login with enough permissions, I guess...
So after the third time I just hard-crashed the hard drive when it got to the last ("can't start Windows Image Acquisition", cancel/retry) window and I did end up with the files on the HDD but... they won't install or delete now. I'm infested. Try to install in Normal or Vega mode, it now pops up a filled in userid/serial number box, and when you click ok or retype it, it says the s/n is invalid. I keep having to reboot to get Windows Installer to let me start it (another permissions problem). So I'm stuck. UpToDateTrendMicro doesn't find any evil doers... the kb403613 sent me to this forum,
with hopes,
M3/ [that's MEL, or as close as the ScreenNameBouncer would let me get]

Not sure it will help, but try it when logged in as the administrator and with anti-virus turned off. As far as error numbers, must of us have no clue (there seems to be a list at Adobe, but we don't work there.

Which version of Windows XP (SP1, SP2, SP3?) can I install on Mac Pro 2011 using Boot camp

I am planning to install Microsoft XP on my Mac Pro 2011 using boot-camp. Since there are multiple versions available (Home, Professional, Pro with SP1, SP2, and SP3's etc…) I am finding hard to decide which one is the tested and best available option?
Also any other specific features to consider while purchasing this OS.
Please advise…

Gurleen80 wrote:
Thank you guys for your quick response.
However, I am not clear what you guys wanna say here, I simply want to know Which windows XP can I install on Macbook Pro (Laptop) using boot camp?
I will repeat what I already said given that you told us that you are running Lion on a newer MacBook Pro.
You should visit the Boot Camp forum https://discussions.apple.com/community/windows_software/boot_camp
And you should read the Boot Camp Help documents http://www.apple.com/support/bootcamp/
XP, regardless of version, is not going to work on a newer computer nor will it work if you are running Lion OS.

Hi, can I install Adobe Acrobat Pro on 2 devices?

Can I install Adobe Acrobat Pro on 2 devices? I have a desktop running Windows 7 and am thinking of buying a laptop running Windows 8. I would be the sole user and only using one device at a time.

Yes, the license permits installing on two machines at the same time as long as the same software is not being used on both simultaneously.

Can i install my macbook pro anybrand of hdd?

Please help me.. Can i install my macbook pro anybrand of hdd?

Seagate, WD, HGST, Toshiba, various SSDs will work: http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
OWC also provides video installation guides that you can look at to see whether you want to attempt to install a drive yourself.

Buying Final Cut Studio second hand- can I install on Mac Pro?

I'm going to buy Final Cut Studio software from a friend, who has registered the application with Apple. Can I install the software on my Mac Pro without problems? The previous owner had it installed on a MacBook Pro.

As long as they delete it from their computer, you should be fine....
3. Transfer. You may not rent, lease, lend or sublicense the Apple Software. You may, however, make a one-time permanent transfer of all of your license rights to the Apple Software to another party, provided that: (a) the transfer must include all of the Apple Software, including all its component parts, original media, printed materials and this License; (b) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; and (c) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License. All components of the Apple Software are provided as part of a bundle and may not be separated from the bundle and distributed as standalone applications.
http://store.apple.com/Catalog/US/Images/finalcutpro.htm

Can I download final cut pro X trial version and use final cut pro 7 during and after the trial period ?

My company uses Final cut pro 7 and I have to know if we can try Final cut pro X on one of our G5 and, in the case of we can't switch to FCPX, if we can use FCP7 again without re-initialise it. Thanks
sorry for my english. it's not my maternal language.

You cannot use FCPX on a G5. It's Intel only.

Showing a Final Cut Pro project to an audience - from Final Cut or Quicktime?

I've created a 13 min Final Cut Pro project to show at an Awards Ceremony of our college. Is it better to show the video directly from Final Cut or to export it and show it from Quicktime? What's the best quality output?

hi,
its not about quality. Since you can export out at the same quality as prorez. Its about performance. Since fcpx has to combine multiple sources, audio, graphix, video etc, then combine them al into a whole, there is far more that could go wrong. Always export out a finished mastered rendered file and play that. Just make sure that the computer playing the file back can handle it. ie if you chose an uncompressed codec to export out as, the computer may not like playing it back. Choose a prorez or h264 codec, they will be fine.
hth
adam

Can't install Windows 7 Pro x64 - device driver missing - can't eject DVD

Hello,
I am trying to install Windows 7 Pro x64 - I create the partition in boot camp and start windows install process. **During the Windows install process**, it says "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: if the Windows installation media is in the CD/DVD drive, you can safely remove it for this step".
Apparently the drivers are on the OSX install DVD. But, there is no way to eject the windows DVD! Why on earth is there no manual eject on Macs? Is there another way to eject? I tried to put a paperclick in the slot next to where a CD is inserted but it didn't do anything. Is there another way to get Windows to see the correct device drivers?
I am all for clean slick designs, but when it does not have all required functionality, it is kind of useless.
I am talking to Mac Support and they can't help.
Looks like I will have to return this Mac, I also need to boot into full Windows (without Parallels or VMWare) to do my work.
dan
Message was edited by: dbperson

You don't mention what Mac you have, so I'd have to say there is almost no way to help.
IF the 7 Pro x64 came download ISO thru EDU, you have to burn it, and if you use Disk Utility, at 2X reduced burn speed... otherwise it won't work.
A VM isn't fussy and can use ISOs.
If you want both native and VM, to have Windows installed on its own hard drive and use it under OS X, then you have to install it and use Boot Camp Assistant.
I'd say it is all about your DVD media.

Can I install Windows XP Pro 64 bit on this specific Mac Pro?

I have a 2x3GHz Quad-Core Intel Xeon. It's not one of the newest machines. It's from the first rev of dual-quads that came out. I bought it in mid-2007.
I'd love to install Windows XP Pro 64-bit on a second hard drive.
- Can I install Win XP 64 on this Mac?
- If so, what version of Win XP Pro do I need to get?
Thanks,
----------S

Hi Steve,
in theory you can install XP 64-bit Professional, which by the way is the only version of a 64-bit XP avaiable.
There is no 64-bit XP Home.
BUT, since Apple does not provide any drivers for 64-bit XP, you are on your own to look and find the needed drivers for it.
You at least need drivers from Intel (for chipset, SATA and NIC) Realtek (for audio) Microsoft (for support of HD-Audio) and ATI/NVIDIA (for graphics card).
You will still be missing any kind of Apple specifics like Keyboard functions, but should be able to run and work with XP-64.
Good Luck
Stefan

My files from final cut pro trial aren't transferring to final cut pro x - how do I fix this?

I had been making a video in the final cut pro trial and didn't realize my trial was going to run out as soon as it did that day. I downloaded final cut pro x and was planning on finishing up editing tonight, but none of my files from final cut pro trial transferred over to final cut pro x. Everywhere I have read online said they should transfer automatically, but that's not happening. Is there a fix?

you're tried using the 'Open Library' command?
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver217d6e77d
Where are your Projects & Events located?

Can't install final cut pro 5.0/erased my old final cut

Similar Messages

Maybe you are looking for