Can't install itunes 11.0.1 on windows 7...get a Rolling Back Action message

Hi...I cannot install iTunes 11 on my Windows 7 PC. The installation goes all the way through and I get a "Rolling Back Action" dialog at the end and the progress bar just goes backwards.
Why is this happening?

Not an error that I've seen. What stage of the process are you at when this happens?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • Why i can't install iTunes 10.6.3 on windows vista home premium x86 ???? 1 hour ago

    Why i can't install iTune 10.6.3 on windows vista home premium x86 ????

    What happens when you try, what error messages do you get?

  • Can't install itunes on an acer laptop, windows 7, any uselful ideas???

    Can't install itunes on an acer laptop, windows 7, any uselful ideas???

    http://support.apple.com/kb/HT1926

  • Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"

    Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"

    Have you completed all windows update including service Pack1?  If not, please complete all the windows update then follow steps below to re-install all over.
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime  
    Apple Software Update  
    Apple Mobile Device Support  
    Bonjour  
    Apple Application Support
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • How can i install itunes 11.0.1 on windows xp professional x64 edition

    how can i install itunes 11.0.1 on windows xp professional x64 edition

    I have eventually managed to resolve my issue by:
    1) Installing "Segoe UI" fonts in the C:\Windows\Fonts folder.
    2) Changing my default colour profile to "sRGB Color Space Profile".
    Navigate to My Computer > Control Panel > Display > Settings > Advanced > Color Management.
    Click Add button and select sRGB Color Space Profile.icm from the Add Profile Association pop-up window.
    Select sRGB Color Space Profile.
    Click on the Set as Default button.
    Click on Apply, OK, OK.

  • Every time i try to install itunes on my laptop for windows  i get the message''key not valid for use in specified state''  any clue? '

    every time i try to install itunes on my laptop for windows  i get the message''key not valid for use in specified state''  any clue?

    For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\<User>\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Trying to install iTunes to older laptop running Windows XP, getting message during install "There is a problem with the Windows Installer Package".....

    Trying to install iTunes to older laptop running Windows XP, getting message during install "There is a problem with the Windows Installer Package".....

    Here's the iTunes installation troubleshooter for Windows:
    http://support.apple.com/kb/HT1926

  • Can't install itunes 11.1.3 on Windows 8.1

    Hi, I bought a new toshiba a few days ago, and i need to install itunes. I tried many times, and I can't install it.
    My pc runs windows 8.1 64 bit. It says that exists a problem with this windows installer package. And that is necessary a DLL to conclude this installation that cannot be executed.
    Can anyone help me?

    My pc runs windows 8.1 64 bit. It says that exists a problem with this windows installer package. And that is necessary a DLL to conclude this installation that cannot be executed.
    The following user tip has links to resources on that:
    " ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows
    ("Run as administrator" should also work on Windows 8 systems as well as 7 or Vista.)

  • Can't Install iTunes 6.0.5 on Windows XP

    The newest version of iTunes (6.0.5.20) won't install on my Windows XP system. The install wizard proceeds normally until the very end, where I get the message "The installation was interrupted before iTunes could be completely installed". Happens regardless of the internet connection (at home or at work). I've never had this issue before. Any suggestions?

    "QuickTime failed to initialize (error -2096). QuickTime is required to run iTunes. Please uninstall iTunes, then install iTunes again."
    Even though you're getting this when launching iTunes rather than the QuickTime Player, I'd start with the following document:
    [Error -2096 message when opening QuickTime for Windows in Compatibility Mode|http://support.apple.com/kb/TS1875]
    If you also have to go on to check the Compatibility tab for your iTunes.exe, make sure that no boxes (not just the comptibility mode checkbox) are checked.

  • I can't install itunes on my laptop and i always get an error message

    When I want to update itunes i get an error message which says that i have an runtime error (R6034 An application has made an attempt to load the C runtime library incorrectly. Please contect the applicantion's support team for more information), so I reinstall itunes and now i can't install it anymore. I always become the same error message and that message says (iTunes was not installed correctly. Please reinstall iTunes. Error7 - Windoes error 1114) and (Apple Mobile Device can't started. Check if you have sufficent permittions to start the system service)
    What can I do and what is the problem?
    Please help me!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Can't install iTunes on new notebook with windows 8.1

    First, sorry for my bad english, i hope you can understand what i am trying to say.
    I got a new notebook and wanted to install iTunes. First it worked but then i needed to do a system restore because of a virus.
    So iTunes was no longer on my notebook and i tried to reinstall it, but it does not work. I always get "try to install new, ERROR 7 (Windows error 5).
    I searched through many communities and tried things like activating the Microsoft Frame Network or manual deinstalltion, restarting the computer, ...
    Please help me

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Can't install itunes 10.5, and ipod touch 4g getting 1604 and1601 errors.

    Hi. Okay let me explain my dilemma, and please try to hold on. Alright, so last year when i first got my ipod touch 4g, I jailbroke it with LimeRain from Limerain.com. 3 days ago, i decided to delete a facebook app on my ipod, and then decided to re-install it. While the app was re-installing, it froze. I turned off my ipod, and tried turning it back on, and it got stuck on the limerain skull. I left it for about 20min and nothing happened. I realized that somthing was wrong and I would have to restore it. I went to my computer, and tried to restore it back to factory settings. I first got a 1601 error. I then used IREB to try and fix it, but that didn't work, and I started to get a 1604 error. At the time i had itunes version 10. I was told i needed to update it, so i tried to. It wouldn't let me. It kept giving me this: "An error occured during the installation of assembly'Mircosoft.vc80.crt, type="win 32". Version="8.0.50727.6196", public key token....etc.........". i then uninstalled all of itunes off my computer and tried re-installing it. Now I can't even install itunes whatsoever because i keep getting the same error as before. PLEASE HELP ME! :'(!

    Try this approach as it worked in my situation.  Just a shot-
    I found msicuu2.exe (Windows Installer Cleanup Utility) for free and used that tool to remove iTunes from my machine and then reinstalled iTunes. This fixed my problem.  Microsoft use to have the tool on their site to download and no longer do (I can only assume since it was so easy to use that people removed things they shouldn't have and it became to big a pain for Microsoft to deal with).  With that said, I was able to find the tool at another site.  It was an easy fix after I installed the cleanup utility and I had iTunes reinstalled in minutes.
    Was getting errors due to a previous windows installer package corrupted and not deleted. (last itunes update). Download from the internet and run this program selecting Itunes to be removed.  (you won't lose your music content), then restart your computer.  When you restart re-download Itunes 10.5.3  and reinstall.  It will automatically reload a non corrupted installer package and will go find all your music, files, etc. to restore by itself.  No problems what so ever resinstalling and getting all my stuff to add to my new Touch afterwards. 
    note:  I spent hours researching this issue and it worked in my case.  Hopefully it helps-

  • Can't Install iTunes 10.3.1 on Windows 7

    When I try to install itunes on Windows 7, I recieve an error message that says "Could not access network location %APPDATA%". I followed all the apple support troubleshooting advice but still haven't been able to install it.

    However, I keep getting the error as the itunes installer gets to the point of computing space requirements.
    That one's consistent with disk/file damage (on occasion ... it's not the most common symptom of it, and can be caused by other things). So I'd try running a disk check (chkdsk) over your C drive.
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I can't install itunes 10.6 after download I'm getting error code 2324? and itunes stopped working?

    After downloading the update package and trying to install it, the installation didn't work with error code 2324, and i can't open itunes on my laptop anymore?

    First of, what sort of system have you got. (Right-click My Computer in the start Menu and select properties) There are two flavours of Windows 7 x64 OEM (original equipment manufacture)  One is a total x64 system for the OS and all programs.  The other runs x64 address space for the OS and x32 address space for programs.  I had exactly the same problem with my system and microsoft office. Roll back (using the recovery console to rewrite all the original registry values before you upgraded will give you a clean system for the upgrade).  The upgrade itself should recognise the correct upgrade version for you automatically.  However, sometimes it fails to do this due to data corruption.  Go here-  http://www.apple.com/itunes/download/ and manually download what you need.  after download Right-click the file and select "properties"  and click on "unblock" box in lower right corner. close, Then right click the file again and select "Run as administrator".  If u still have problems, reboot into Safe mode.  Uninstall itunes. Reboot again to safe mode. Disconnect from internet and disable any 3rd party system watch and antivirus programs.  Reinstall itunes, then reboot normally.  If the problem still persists run a system diagnostic check using "Problem Reports and Solutions" from in Control Panel.  Let me know how you get on.

  • HT2311 Can't install iTunes on my PC running Windows 7.

    I recently replaced my computer and now am unable to load iTunes on my PC that runs Windows 7 64 bit system.  I get the following message "There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor."

    Hi there franthonyy,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    -Griff W.

Maybe you are looking for