Can't install LPD Service Role. Error is 0x800f0922

I am trying to install the LPD Service on a 2012 Server.I was also having problems installing the printer server role but managed to install this when I chose it on its own and not to install as well as LPD service.
The error is 0x800f0922.
I tried removing anti virus software and disabling the vNICs.

Hi，
Based on my research, Error Codes 0x800f0922 errors may be caused by missing system files or broken system registry structures. I suggest you run the “sfc /scannow” at the command prompt to see if any system files is missing or corrupted.
The standard LPD port is 515. Please also make sure that no 3rd-party application blocked the LPD Port.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

How Can I install Web Service on Oracle 11g r1?

How Can I install Web Service on Oracle 11g r1?

Hi,
Is necesary install XDB?
Because i have executed;
select * from dba_registry
where COMP_ID = 'XDB'
Oracle XML Database
Regards

Can't install safari extensions, I get the error message "Safari can't install this extension, An error occurred while installing the extension "Pin It Button"." Any suggestions?

Every time I try and install an extension for Safari I get the error message "Safari can’t install this extension, An error occurred while installing the extension “Pin It Button”." I have all the latest updates, working on OS X Yosemite v 10.10.2 / Safari v 8.0.3. Any suggestions?

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to search for an item named "Safari Extensions List". If found, delete it. Quit Keychain Access.
Quit and relaunch Safari.

Can´t install voice over kit (error 32) what to do?????

Can´t install voice over kit (error 32)
please tell me what is it and how can i remove this error?

sono andato su C: ho cercato ipodvoiceoversetup e l'ho installato sul pc. ho riprovato e ha funzionato

Can't instal firefox 4, Gives error that my comupter needs to reboot to uninstall an older vesion. But I have uninstalled the other version and have rebooted 4 times now.

Can't instal firefox 4, Gives error that my comupter needs to reboot to uninstall an older vesion. But I have uninstalled the other version and have rebooted 4 times now.

I have a similar problem installed firefox 4.0 update (x86 en-us) am told to reboot all the time. I cannot uninstall and it has also messed up my email attachments which I cannot now open except if they are microsot office.

Installing Report service role

Hi All
Recently i installed SCCM 2012 R2 - the DB located on remote server
the SQL server also using now as a report server for SCOM 2012
when i tried to install repoert server role on sccm site server ( primary server ) i cannot find reporting server instance at the drop menu
if i install the role on the sql server it's installed but when going to component status i fount it with critical stauts
advise please

Severity,Type,Site code,Date / Time,System,Component,Message ID,Description
Error,Milestone,PR1,4/30/2014 4:16:42 PM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 3:16:42 PM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 2:16:41 PM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 1:16:40 PM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 12:15:43 PM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 11:15:41 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 10:15:32 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 9:15:32 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 8:14:35 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 7:13:46 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 6:12:30 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 5:11:32 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Information,Milestone,PR1,4/30/2014 4:11:10 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,4609,Component Status Summarizer set the status of component "SMS_SRS_REPORTING_POINT", running on computer "sqlserver.domain.com", to Critical.
Possible cause: The component is experiencing a problem. Solution: Diagnose and fix the problem by: 1. Examining the status messages that the component reports. 2. Correcting the problem. 3. Instructing Component Status Summarizer to
reset the counts of Error, Warning, and/or Informational status messages reported by the component. To reset the counts, right-click Reset Counts on the component in the Component Status summary in the Configuration Manager Console. When the counts are reset,
Component Status Summarizer will change the status of the component to OK. This might take some time if site "PR1" is a child site. 4. Delete any unwanted status messages from the site database, if necessary. 5. Monitor the component
occasionally to verify that the problem does not reoccur.    Possible cause: The component is OK and you were unnecessarily alerted because the Component Status Thresholds are set too low for the component. Solution: Increase the Component
Status Thresholds for the component using the Thresholds tab of the Component Status Summarizer Properties dialog box in the Configuration Manager Console.    Possible cause: The component is flooding the status system by rapidly reporting the
same message repeatedly. Solution: Diagnose and control the flood of status messages by: 1. Verifying that the component is actually flooding the status system. View the status messages reported by the component and verify that the same message
is continually reported every several minutes or seconds. 2. Noting the Message ID of the flooded status message. 3. Creating a Status Filter Rule for site "PR1" that instructs Status Manager to discard the flooded status message when
component "SMS_SRS_REPORTING_POINT" on computer "sqlserver.domain.com" reports it.   4. Verifying that your sites' databases were not filled up by the flooded status message. Delete any duplicate
Information,Milestone,PR1,4/30/2014 4:11:10 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,4605,Component Status Summarizer detected that component "SMS_SRS_REPORTING_POINT", running on computer "sqlserver.domain.com", has reported 5 or
more Error status messages during the Component Status Threshold Period.    Possible cause: The count equals or exceeds the Component Status Critical Threshold (5 status messages) for Error status messages for the component. Solution:
Component Status Summarizer will set the component's status to Critical in the Component Status summary in the Configuration Manager Console.
Error,Milestone,PR1,4/30/2014 4:10:35 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 3:10:09 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 2:10:09 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Error,Milestone,PR1,4/30/2014 1:10:08 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,7403,The report server service is not running on Reporting Service Point server "sqlserver.domain.com"; start the service to enable reporting.
Information,Milestone,PR1,4/30/2014 12:10:42 AM,sqlserver.domain.com,SMS_SRS_REPORTING_POINT,4610,Component Status Summarizer set the status of component "SMS_SRS_REPORTING_POINT" running on computer "sqlserver.domain.com" to Warning.

Can't install Acrobat XI. ERROR: DW050. ERROR: 1316. error: 1603. Exit Code: 7.

Having problems installing Acrobat XI from Creative Cloud. I receive a few error messages each time I try.
Can anyone help?
This is the message:
Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {23D3F585-AE29-4670-8E3E-64A0EFB29240} Acrobat Professional 11.0.0.0 -----------
ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroPro.msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroPro.msi
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Hi,
This msi error (1613) usually means previous install is creating problems with this install. Have you tried uninstalling all previous versions of Acrobat?
Regards,
Anirudh

Can´t install voice over kit (error 32)

I can´t install voice over kit in my ipod shuffle 2GB because I received error 32, I downloaded but then I cant install it.
The error message: "iTunes can´t install VoiceOver Kit. An unknown error has occurred (32).

sono andato su C: ho cercato ipodvoiceoversetup e l'ho installato sul pc. ho riprovato e ha funzionato

Can't install any app, unknown error

i installed some apps in a 5800xm, but since yesterday i cant install any app: i got this
http://img713.imageshack.us/img713/2329/234bcjd.jpg
it say Installation failed, unknown error: 2148532241
I tried to reinstall ovi suite beta, and I restored the default settings in the phone but still got that error, I can not install anything even if I install through Pc Suite
what can i do before i try to hard reset?
Solved!
Go to Solution.

2148532241 means that you have 1GB or less of free space on your expandible memory (the SD). You only have to delete some files and get free space. After that, everything works fine.

Can't install N-GAGE update error

I have a second brandnew N96. The first had a fabric failure. A piece of plastic was blocking the speaker. So when i made a phonecall i couldn't here the "other side". On that same N96 the N-GAGE application failed to install. I tried to download it from the N96 connected with GPRS. The result was a UPDATE ERROR. I followed all the instructions on the N-GAGE website and i checked the firmware. Everything seems to go fine but in the final stage the UPDATE ERROR occurs. So i hooked it up with USB to my PC. I downloaded the application and tried to install, resulting in the same UPDATE ERROR.
I can not understand that this expensive and state of the art device is not working like it should. The manual of the TETRIS game from the box with the serial number is just kept in the box... I bought something but i can not use it.
I had to bring the first N96 back to the store. I hoped that everything would be solved with this new N96. But also this new device can not install the N-GAGE application.
Please help me out.
Thanks in advance, greetings Henk

Ok, so I am seriously at wit's end right now... I have the N81 8gb, with v21.0.010, I have been struggling to update my n-gage for the past 3 days... I updated my firmware a few weeks ago, and everything was fine, I updated my n-gage without any hassles, until I decided to format my phone... BIG MISTAKE!! Anyway, now I can't seem to update my n-gage v1.10 (1349)! What happens is, I try to install v1.20 (1459), and then it gives me "update error", but when I check my application manager, it shows that I do, in fact, have v1.20 installed! I then check in the n-gage app itself, and it shows v1.10! What gives?!
I did the soft reset (*#7370#) to no avail; I did the hard reset (*- green call button - 3) to no avail as well! I have absolutely no idea what the problem is! I formatted my mass memory as well, thinking the problem lay there, but nothing! If anyone has any advice on how to sort this out, it will be much appreciated!

Downloaded but can't install - keep getting an error message because I never upgraded Keynote to 9.0, just pages and numbers

Downloads but can't install the upgrade because I never upgraded Keynote, just Keynote and Numbers so I keep getting the error message about Keynote, which I don't use. I just want to upgrade Pages and Numbers.

If you purchased Pages and Numbers from the MAS:
Dock > App Store > Updates (top bar of window) > click update next to the applications
Peter

HT1222 Can't install iOS 6 says error can't install why?

I downloaded the ios6 it even restarted itself but when I clIck install says error can not install :(

I can't install iOS6 on my iPhone 4 neither (OTA).
Installation error: Error Domain=com.apple.softwareupdateservices.errors Code=-1 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-c-o-m-.-a-p-p-l-e-.-s-o-f-t-w-a-r-e-u-p-d-a-t-e-s-e-r-v-i-c-e-s-.-e-r-r-o-r- s -e-r-r-o-r ---1-.-)-" -U-s-e-r-I-n-f-o-=-0-x-1-0-0-7-6-3-2-0 -{-N-S-U-n-d-e-r-l-y-i-n-g-E-r-r-o-r-=-0-x-1-0-1-6-d-e-1-0 -"-T-h-e -o-p-e-r-a-t-i-o-n -c-o-u-l-d-n’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-M-o-b-i-l-e-S-o-f-t-w-a-r-e-U-p-d-a-t-e-E-r-r-o-r-D-o-m-a-i-n -e-r-r-o-r -5 -- -C-o-u-l-d -n-o-t -l-o-a-d -p-a-t-c-h-d -o-p-t-i-o-n-s -f-r-o-m -'-/-v-a-r-/-M-o-b-i-l-e-S-o-f-t-w-a-r-e-U-p-d-a-t-e-/-U-p-d-a-t-e-.-p-l-i-s-t- '-. -e-r-r-n-o-=-2-.-)-"-}
Sep 20 08:37:28 unknown Preferences[94] <Warning>: SU generic error: Error Domain=com.apple.softwareupdateservices.errors Code=-1 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-c-o-m-.-a-p-p-l-e-.-s-o-f-t-w-a-r-e-u-p-d-a-t-e-s-e-r-v-i-c-e-s-.-e-r-r-o-r- s -e-r-r-o-r ---1-.-)-" -U-s-e-r-I-n-f-o-=-0-x-1-0-0-7-6-3-2-0 -{-N-S-U-n-d-e-r-l-y-i-n-g-E-r-r-o-r-=-0-x-1-0-1-6-d-e-1-0 -"-T-h-e -o-p-e-r-a-t-i-o-n -c-o-u-l-d-n’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-M-o-b-i-l-e-S-o-f-t-w-a-r-e-U-p-d-a-t-e-E-r-r-o-r-D-o-m-a-i-n -e-r-r-o-r -5 -- -C-o-u-l-d -n-o-t -l-o-a-d -p-a-t-c-h-d -o-p-t-i-o-n-s -f-r-o-m -'-/-v-a-r-/-M-o-b-i-l-e-S-o-f-t-w-a-r-e-U-p-d-a-t-e-/-U-p-d-a-t-e-.-p-l-i-s-t- '-. -e-r-r-n-o-=-2-.-)-"-}
Sep 20 08:37:28 unknown Preferences[94] <Warning>: SU generic error: Error Domain=com.apple.softwareupdateservices.errors Code=-1 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-c-o-m-.-a-p-p-l-e-.-s-o-f-t-w-a-r-e-u-p-d-a-t-e-s-e-r-v-i-c-e-s-.-e-r-r-o-r- s -e-r-r-o-r ---1-.-)-" -U-s-e-r-I-n-f-o-=-0-x-1-0-0-7-6-3-2-0 -{-N-S-U-n-d-e-r-l-y-i-n-g-E-r-r-o-r-=-0-x-1-0-1-6-d-e-1-0 -"-T-h-e -o-p-e-r-a-t-i-o-n -c-o-u-l-d-n’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-M-o-b-i-l-e-S-o-f-t-w-a-r-e-U-p-d-a-t-e-E-r-r-o-r-D-o-m-a-i-n -e-r-r-o-r -5 -- -C-o-u-l-d -n-o-t -l-o-a-d -p-a-t-c-h-d -o-p-t-i-o-n-s -f-r-o-m -'-/-v-a-r-/-M-o-b-i-l-e-S-o-f-t-w-a-r-e-U-p-d-a-t-e-/-U-p-d-a-t-e-.-p-l-i-s-t- '-. -e-r-r-n-o-=-2-.-)-"-}

Can't install iTunes, gives two errors

Whenever I try to install iTunes, it gives me two error messages:
Error 1325.iPodService.Resources is not a valid short file name.
and
Error: -1603 Fatal Error during Installation.
Does anyone know what's up? I used to use iTunes, but uninstalled it after some problems with my computer, now I can't install it to use my iPod.

Try installing the Quicktime standalone. Find it here:
http://www.apple.com/quicktime/download/standalone.html
Those errors are usually due to a broken Quicktime, which iTunes needs to have in order to run. TURN OFF all your security software, because programs like Norton will interfere with the successful download and install. Also, save it to your harddrive and install it from there instead of running it over the internet.
Good Luck,
Rachyl

Can not install ituns beacause of error 1639

i can't install itunes beacause of error1639
ERRORINVALID_COMMAND LINE
please tell me how to solve.
windows XP professional
thank you.
Windows XP Pro no

Are you installing from a CD or from the internet?

PowerView - Can't install reporting services add-in for sharepoint

hey,
i'm trying to install PowerView on our existing sharepoint server.
i'm following the steps in the deployment document-->
http://msdn.microsoft.com/en-us/library/hh231687%28v=sql.110%29.aspx
i'm stuck now with the installtion of the " Reporting Services Add-in" nothing seenms to work, i've tried to follow the steps in this document -->
http://msdn.microsoft.com/en-us/library/aa905871%28SQL.110%29.aspx
and the error that i'm facing is -->
SSRSCustomActionError: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
i've checked in windows\assembly folder and the Microsoft.ReportingServices.SharePoint.Common version is 11.0.0.0
so, i have a newer version then i need?
what can i do?
Dave

Hello.
After having the same issue like you in a recently installed SahrePoint 2013 SP1 farm, and using the information I found in http://msdn.microsoft.com/en-us/library/aa905871%28v=sql.110%29.aspx, I traced with the tool procmon the operation, and finally solved
the problem after discovering a little bug.
These were the steps I performed:
1.- I installed "Microsoft SQL Server 2012 RS Add-in for SharePoint" with the command
Msiexec.exe /i rsSharePoint.msi SKIPCA=1
2.- I executed PROCMON ...creating a filter of include the Process Name "rsCustomAction.exe"
3.- I executed a elevated Command Prompt, and going to %temp% folder (in my case C:\Users\%username%\AppData\Local\Temp), executed rsCustomAction.exe /i
4.- After execute this command I obtained in the Command Prompt the error:
C:\INSTALL\RS>rsCustomAction.exe /i
2014-09-29 08:59:20: User: sharepoint-farm
2014-09-29 08:59:20: Installing Report Server feature.
2014-09-29 08:59:23: Calling copyappbincontents command.
2014-09-29 08:59:23: Install error: The system cannot find the file specified
2014-09-29 08:59:24: Error details: System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
   at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
   at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
   at RSCustomAction.BaseProcessLaunch.LaunchCommand(String fileName, String arguments, Boolean ignoreExitCode)
   at RSCustomAction.PsconfigCommands.CopyAppBinContents()
   at RSCustomAction.RSFeatureSetup.Install(Boolean repair, Int32 addRetries)
2014-09-29 08:59:24: Uninstalling Report Server feature.
2014-09-29 08:59:24: Stopping W3SVC service.
2014-09-29 08:59:26: Removing Report Server web application files
2014-09-29 08:59:26: Removed file C:\inetpub\wwwroot\wss\VirtualDirectories\80\App_GlobalResources\ReportServer.resx.
2014-09-29 08:59:26: Removed file C:\inetpub\wwwroot\wss\VirtualDirectories\22816\App_GlobalResources\ReportServer.resx.
2014-09-29 08:59:26: Removing Report Server web.config modifications
2014-09-29 08:59:26: web.config file located at C:\inetpub\wwwroot\wss\VirtualDirectories\80\web.config
2014-09-29 08:59:26: web.config file located at C:\inetpub\wwwroot\wss\VirtualDirectories\22816\web.config
2014-09-29 08:59:26: Starting W3SVC service.
2014-09-29 08:59:26: SSRSCustomActionError: The system cannot find the file specified
5.- Tracing the results in PROCMON, I discovered an extrange issue: The installation was looking for the command PSCONFIG.exe but in a in a folder different than standard.
The installation was look for PSCONFIG in
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\BIN\BIN
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\BIN
...instead C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\BIN or C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN
So... the solution which worked for me was to create C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\BIN\BIN and place here PSCONFIG.EXE and PSCONFIG.EXE.CONFIG obtained from C:\Program Files\Common Files\Microsoft Shared\Web Server
Extensions\15\BIN
After doing it, the "Microsoft SQL Server 2012 RS Add-in for SharePoint" was installed fine as you can see en the next Command Prompt capture:
C:\INSTALL\RS>rsCustomAction.exe /i
2014-09-29 09:09:16: User: sharepoint-farm
2014-09-29 09:09:16: Installing Report Server feature.
2014-09-29 09:09:19: Calling copyappbincontents command.
2014-09-29 09:11:56: SharePoint Products Configuration Wizard version 15.0.4569.1503. Copyright (C) Microsoft Corporation 2012. All rights reserved.
Performing configuration task 1 of 3
Initializing SharePoint Products configuration...
Successfully initialized the SharePoint Products configuration.
Performing configuration task 2 of 3
Installing the application content files...
Installing the SharePoint Central Administration Web Application content files...
Installing the SharePoint Web Application content files...
Successfully installed the application content files.
Performing configuration task 3 of 3
Finalizing the SharePoint Products configuration...
Successfully completed the SharePoint Products configuration.
Total number of configuration settings run: 3
Total number of successful configuration settings: 3
Total number of unsuccessful configuration settings: 0
Successfully stopped the configuration of SharePoint Products.
Configuration of the SharePoint Products has succeeded.
2014-09-29 09:11:56:
2014-09-29 09:11:56: copyappbincontents command completed successfully.
2014-09-29 09:12:17: Adding ReportServer feature to farm.
2014-09-29 09:12:18: Installed ReportServer feature.
2014-09-29 09:12:38: Adding ReportServerStapling feature to farm.
2014-09-29 09:12:38: Installed ReportServerStapling feature.
2014-09-29 09:12:58: Adding ReportServerItemSync feature to farm.
2014-09-29 09:12:58: Installed ReportServerItemSync feature.
2014-09-29 09:13:18: Adding ReportServerCentralAdmin feature to farm.
2014-09-29 09:13:21: Installed ReportServerCentralAdmin feature.
2014-09-29 09:13:21: Activating Report Server feature to root level site collections.
2014-09-29 09:13:21: Activating feature in web app 'dev-apps.eg.local - 80'
2014-09-29 09:13:31: Activating feature to root site collection: http://dev-apps.eg.local
2014-09-29 09:13:31: Feature already activated in site collection http://dev-apps.eg.local
2014-09-29 09:13:31: Activating Report Server feature in all admin site collections.
2014-09-29 09:13:31: Activating feature in web app 'SharePoint Central Administration v4'
2014-09-29 09:13:31: Activating feature to root site collection: http://egdevsps-ap1:10000
2014-09-29 09:13:42: Activated feature for root site collection: http://egdevsps-ap1:10000
2014-09-29 09:13:42: Activating feature to root site collection: http://egdevsps-ap1:10000/sites/Help
2014-09-29 09:13:42: Activated feature for root site collection: http://egdevsps-ap1:10000/sites/Help
2014-09-29 09:13:42: Activating Report Server Central Admin feature in root-level admin site collections.
2014-09-29 09:13:42: Activating feature in web app 'SharePoint Central Administration v4'
2014-09-29 09:13:42: Activating feature to root site collection: http://egdevsps-ap1:10000
2014-09-29 09:13:42: Feature already activated in site collection http://egdevsps-ap1:10000
2014-09-29 09:13:42: Calling InstallHelp command.
2014-09-29 09:15:26: SharePoint Products Configuration Wizard version 15.0.4569.1503. Copyright (C) Microsoft Corporation 2012. All rights reserved.
Performing configuration task 1 of 3
Initializing SharePoint Products configuration...
Successfully initialized the SharePoint Products configuration.
Performing configuration task 2 of 3
Installing help collections...
Successfully installed help collections.
Performing configuration task 3 of 3
Finalizing the SharePoint Products configuration...
Successfully completed the SharePoint Products configuration.
Total number of configuration settings run: 3
Total number of successful configuration settings: 3
Total number of unsuccessful configuration settings: 0
Successfully stopped the configuration of SharePoint Products.
Configuration of the SharePoint Products has succeeded.
2014-09-29 09:15:26:
2014-09-29 09:15:26: InstallHelp command completed successfully.
2014-09-29 09:15:26: Stopping W3SVC service.
2014-09-29 09:15:29: Starting W3SVC service.
The command completed successfully
Maybe this is a bug, or maybe a result of failed installation of PowerPivot, but the true is: for me that was the solution
Regards.

Can't install LPD Service Role. Error is 0x800f0922

Similar Messages

Maybe you are looking for