Can't Install Quicktime for Firefox under W2K

I am unable to install Quicktime with Firefox. I am running W2K.
The current version doesn't support Quicktime. I'm not able to find a version that does.
Any suggestions?
Fred

http://www.apple.com/support/quicktime/
Click the "Older versions" link and search for 7.1.6. I believe it is the last version to run on your OS.

Similar Messages

  • Can't Install Flash for Firefox

    I was prompted today by Firefox to install the latest version of Flash. Unfortunately, the installer says I have insufficient permissions for the file C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll. As I understand it, that would mean I don't have administrative permissions, but I do. I am on the only account on this computer, an administrator account.
    I downloaded the uninstaller to try to start fresh. It uninstalled successfully, but when I tried to install, I get the same error. Now I have no flash at all for Firefox.
    I tried to use IE instead, and that worked perfectly. I can view flash content in IE now fine. Unfortunately, I guess I have to install it for Firefox separately, because I still can't view flash content in Firefox.
    I am using the latest version of Firefox on Windows 7 64 bit. Does anyone have any idea what to do?

    alliaphagist wrote:
     NPSWF32.dll has a modified date of 7/17/2009.
    That sounds quite old!  Can I assume that all other files in that folder are newer?
    Can you try the following:
    open a Command Prompt (Start | Run | type cmd )
    in the Command Prompt window type this sequence of commands
    cd \
    cd Windows\SysWOW64\Macromed\Flash
    regsvr32 /u NPSWF32.dll
    exit
    (You can copy and paste, or type everything in just lowercase characters.)
    Next open Windows Explorer, go to C:Windows\SysWOW64\Macromed\Flash and delete NPSWF32.dll (also install.txt, as it is probably also old).
    If you cannot delete that file, what error message do you get?
    P.S. there should be no web browsers running when you do all the above.
    P.P.S. see next post...

  • I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

    I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."  I just trying to get the latest version of iTunes.  Thanks

    "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Can we install PowerPivot for SharePoint on a SQL cluster?

    We are going to deploy SharePoint 2013 with PowerPivot for SharePoint (installed from SQL Server media). According to what I've read out there for a small or medium farm, the recommendation is to install PowerPivot for SharePoint on
    every SharePoint application server in the farm. However, accoding to the licensing doc I've pasted below, PowerPivot can be run outside the SharePoint farm. We are going with SQL Server 2012 Enterprise edition. PowerPivot requires a SQL
    Server license for each server. To save money on licenisng, can we install PowerPivot for SharePoint on the 2 SQL Server cluster nodes (as a separate instance of course)?
    Example License Topologies and Costs for SQL Server 2012 Self-Service Business Intelligence
    http://msdn.microsoft.com/en-us/library/dn305848(v=sql.110).aspx
    http://vcollogan.knows.it http://twitter.com/orbhot

    Hi Vincent,
    PowerPivot for SharePoint is an Analysis Services instance in tabular mode. This
    whitepaper mentions that clustering Analysis Services in SharePoint-integrated mode is not supported (page 8 under SSAS Server Modes.) You can, however, install it as a standalone
    instance on the nodes of the cluster and let SharePoint handle the load balancing.
    My apologies for the confusion on installing the SharePoint binaries on the PowerPivot instance. You don't need to install the SharePoint binaries if it is outside of the SharePoint farm. I was looking at my build documentation where I have both Reporting
    Services and PowerPivot on the same machine with the same reason - reduce licensing cost - and similar to the 3-tier topology but with all of the service application and content databases on the database tier.
    Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
    Blog |
    Twitter | LinkedIn
    SQL Server High Availability and Disaster Recover Deep Dive Course

  • Problems after installing Quicktime for java

    Hi
    I just recently installed Quicktime for java on my computer. Previous to this installation I was running j2sdk1.4.2_03 and this was working fine (compiling and running code) for me. But since I installed QTjava all I can do is compile code.
    I have reset my class path back to
    CLASSPTH = .;C:\j2sdk1.4.2_03\bin
    and my path to
    PATH = ........... .;C:\j2sdk1.4.2_03\bin
    When I try to run a simple helloworld programe I get the following error
    Exception in thread "main" java.lang.NoSuchMethodError: main
    I konw that this is something to do with my classpath, but I cann't figure out what is wrong, any ideas would be greatly appricatied
    Donal

    the programe I am running is as follows
    public class hello
    {     public hello ()
         public void main (String [] args)
         {     System.out.println ("Hello world");
    It compiles fine but I get the above error when I run it. It is the same for other more complex programes I have written which contain a main mettod.

  • Can i install quicktime pro on 2 devices

    can i install quicktime pro on 2 devices
    Have upgraded to pro for laptop and now want to install on office PC, do i need to purchase again or can i use on multiple devices on one licence?

    can i install quicktime pro on 2 devices
    See paragraph 2 of the Software License Agreement for Quicktime.
    2. Permitted License Uses and Restrictions. This License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple computers at the same time. You may make one copy of the Apple Software in machine-readable form for backup purposes only; provided that the backup copy must include all copyright or other proprietary notices contained on the original. Except as and only to the extent expressly permitted in this License or by applicable law, you may not copy, decompile, reverse engineer, disassemble, modify, or create derivative works of the Apple Software or any part thereof. THE APPLE SOFTWARE IS NOT INTENDED FOR USE IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL SYSTEMS, LIFE SUPPORT MACHINES OR OTHER EQUIPMENT IN WHICH THE FAILURE OF THE APPLE SOFTWARE COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE.

  • I can`t install drivers for Promise IDE on WINXP.

    Hi, guys. I have a problem. I can`t install drivers for Promise IDE on WINXP. I `ve got an error "This device cannot start. (Code 10)". In Norton Ghost (DOS) drive on Promise work fine. I can`t install WINXP + SP1 on HDD on Promise controller. After pressing F6 and installing driver i `ve got an error Can`t find drive. BIOS 193 beta. Devices: IBM 120Gb 180GXP on primary master, Seagate 120 SATA 26AS on Third master. CD-ROM and DVD-ROM on secondary channel. Drivers 1.00.1.37 from ASUS and 1.00.1.29 from MSI. No result.
    And another one. Why very poor perfomance when copying large files (700Mb). When starting copying speed is 25-27Mb/sec, when finishing 5-8Mb/sec. All drives under NTFS.
    PS. Sorry for my bad english.

    Quote
    Originally posted by Athlon1000
    But if you have selected Promise as: SATA in BIOS shouldn't you then use the ulsata.sys driver instead and if you choose Promise as: RAID in BIOS then you should use the f2tx*.sys, or am I way wrong here ?
    That's correct  
    So if I do not misunderstand you, Windows hangs when accessing the drive?
    Is it only with this drive, then maybe it's an incompatibility between the controller and the ata electronics of the drive.
    Or maybe it's completely broken.. have you tried it on the ICH5 IDE controller?
    If it works there you should use this configuration.
    I've read about problem with some drives ... take a look into the threads on the top of this board (FAQ etc.).
    What I found out yesterday: You can use the Promise in RAID mode and define a RAID0 array with only one single drive. So you could use the Fasttrak driver from MSI, which is up to date.
    I haven't tried this solution (one disk in a RAID0 stripe configuration), but I think it should work...
    Maybe you give it a try  
    PS.: Before you switch to RAID mode, you have to change the Promise Driver... but be careful: windows won't boot with the wrong driver - your last chance would be "last known good" then...

  • I can't install itunes for windows get error message 5

    i can't install itunes for windows get error message 5

    I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
    BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

  • Can't install Reader for Pocket PC on HTC Touch Diamond

    can't install Reader for Pocket PC on HTC Touch Diamond? why?

    Run the installation on your sync pc... the installation application will run only on a pc, then, activesync installs it on your winmobile device on the next connect session.
    Beverly Howard [Microsoft MVP Mobile Devices]
    (MVP Info at http://mvp.support.microsoft.com/mvpfaqs)

  • Can i install Office for Mac on my IPad ??

    Can i install Office for Mac on my IPad ??

    Sorry, no. Different operating systems. You'll need to look in the app store to find an office program.  If you already have a mac, then you may want to look for Pages, or I have a PC and use office and like Documents to go.

  • Can I install siri for i pod touch

    Can I install siri for i pod touch

    There is not a version of Siri available for an iPod...

  • I bought a new macbook, but I can not install Pages for free

    I bought a new macbook air, but I can not install iWork for free. Why?

    So you are saying it is asking you to pay in the App Store?
    Так вы говорите, она просит, чтобы вы заплатили в App Store?
    Вы должны объяснить, что идет не так, мы не можем видеть ваш компьютер.
    Peter

  • Can't install Updates for Cyberlink and SimplePass

    Can't install Updates for Cyberlink MediaSuite 10-desktop SP63340 v10.0.4.2928  ~OR~ Cyberlink LabelPrint SP63286 v2.5.4.6515  ~OR~ HP SimplePass Identity Protection Software SP63224 v6.0.100.276
    Downloads fine just won't install.
    I have an HP ENVY m6 Notebook PC / Windows 8 64-bit / Intel(R) HD Graphics 4000 / C:/671.53 GB (1.07 GB free)
      / D:/26.33 GB (0.99 GB free)
    Help?

    Hi Kristelline and Paul-Armstrong,
    I saw your posts and I will be happy to help.
    @Kristelline
    Do you have the links that you used to download the Cyberlink MediaSuite and Cyberlink LabelPrint?
    Are you getting any errors message when you are trying the installation? Try doing the installation with your anti-virus disconnected. Also try right-clicking on the file and running it as Administrator.
    @Paul-Armstrong
    When do you get that error message about it not being a valid drive during the install or before it starts?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • I can't install Java in Firefox. Intead Java works fine with IE. I preffer Firefox 4 but...I'm running Win 7 64-bit.

    I;m running win7 64-bit and I can;t install Java in Firefox 4. Java works fine with IE.

    On Java, I think we've covered the basics. There are a couple of other articles that might help:
    [http://support.mozilla.com/en-US/kb/Java-related%20issues Java-related issues | Troubleshooting | Firefox Help]
    [http://kb.mozillazine.org/Plugin_scanning Plugin scanning - MozillaZine Knowledge Base] (you would want to make sure it is ''not'' disabled; in about:config, filter on plugin.scan and see whether anything has been changed from its default)
    On Norton, there are a number of recent threads here, but I have not been reading them. Hopefully someone has posted the answer.

  • Can i install whatsapp in firefox device

    can i install whatsapp in firefox os device and use as i can use in android.

    Hi.
    Currently WhatsApp is not directly supported. But you can install various third party apps like '''ConnectA2''', '''OpenWapp''' and '''LoquiIM''' to use WhatsApp.
    You can browse through the marketplace and find these apps, or you can simple type ''WhatsApp'' in your Adaptive Search bar, and you'll get a reccomendation.
    Personally speaking, the verification process in these apps is a littly buggy. I had to eventually use a combination of these apps to get the verification done. I used ''LoquiIM'' to get the WhatsApp 6 digit pin, and then used that pin in ''OpenWapp'' to get verified.

Maybe you are looking for

  • How to give backgound color

    H All : I am using collection in my application for textbox HTMLDB_ITEM.TEXT(2,null,30,500,''style="background-color: RED"'') i am using this which give me the red in color background effect i am using HTMLDB_ITEM.DISPLAY_AND_SAVE(2,null,30,500) how

  • Problem with ALV amount field display

    hi friend!! i have a editable ALv out put and in that i am displaying Amount and quantity field. In O/p if i enter 100 its taking as 100,00 .Please tell me how to correct the same. Plz help me

  • Importing photos into PhotoShop Elements 9

    Hi. Im very new to photoshop software. Any software for that matter I have about 15000 photos in windows gallery that i initially imported into PSE. But since doing that, as PSE was soooo slow, i went back to windows gallery and cleaned up and organi

  • Trasnaction Location is shown  in Expense Location in iExpenses

    Hi All, We are populating the MERCHANT_CITY field of the ap_credit_card_trxns_all table with the relevant transaction location unsing our custom programs. However when an expense report is created it we are facing the below issue. That is of there ar

  • DISK,VM,NETWORk,PROCESS COUNTER INFO

    Hi, 1. For VM I am using the cpu_vminfo_t to collect the VM counters? The value that I get for pages page in is 4605 (pages page in /lbolt_time). The values for pages paged out is 3881 again divided by lbolt time. Are these values correct? What is th