Can't Install Snow Leopard on external drive

Hey Mac Addicts,
I'm trying to install Snow Leopard on an external drive (Lacie Triple Rugged, FW800 USB3.0) but keep on getting "Installation failed, can't copy the support files.
My drive is partioned in to 5x100GB partitions, GUID partition scheme. I boot from my installation disk, choose my partition and hit install. The DVD spins and spins and eventually give me a failure. I've tried not installing the custom options (Quicktime 7, Rosetta and have even unchecked X11) but still get the same.
The MacBook Pro I'm trying this from is running 10.6.8 and previous successful attempts at doing this were from 10.6.4, I'm thinking this is the issue, but would rather not have to clean install my machine and try again.
If anybody has any idea's that'll be marvellous, as I am a little confused and lost, especially as I've done this before.
All the best and thanks in advance.
BigMik

Two things,
1: Use FIrewire
2: Use Disk Utility to first Erase with Security Option Zero All Data, the entire drive, then setup the partitions
3: If it doesn't work, then increase the size of the 10.6 parittion or reducing the partitions until it works.
4: Also do all this from the Disk Utility on the internal drive, then try again from the 10.6 install disk. Apple might have pulled something.
Also you can clone your present OS X 10.6 partition using the donationware Carbon Copy Cloner, however the external partition needs to be large enough for all the contents (recommended)
https://discussions.apple.com/message/16276201#16276201

Similar Messages

Can't Install Snow Leopard on new drive

I'm having a relatively serious problem with upgrading my hardware. I have a Mac Pro tower with an empty HD slot into which I installed a new drive which mounts properly.
My plan was to simply move everything from the old hard drive to the new one, using Disk Utility's "Restore" function.
That seemed to work fine, but when I restarted and attempted to switch startup disks, selecting the new drive caused an immediate kernel panic (the grey screen saying "You need to restart your computer") which was preceeded momentarily by some very strange dos-like text in the upper left hand corner of the screen.
So after several attempts, I gave up and tried to simply install snow-leopard on the new drive. That never even got started. While the snow leopard installer would happily install the OS on any of my external drives that had enough free space, the new drive (despite the fact that it was mounted on the system) would not even show up in the list of drives to select in the Snow Leopard installer.
I checked the formatting of the drive, and it seems to be the same as both my current startup disk, and the external drive that the OS could be installed on.
How can I move my entire system to this new drive without causing instant kernel panics? Thanks in advance for any help!
Cheers,
Ari

Interesting. Yes, I think that is what macjack had in mind. However, after doing what macjack said, your drive would be erased Mac OS X extended (journaled), and, after shutting down disk utility, you could just continue the install you would have started. At the end of the install, you could restore your files, data, settings, and apps from your other drive. The choice, of course is yours. If I were doing it, I would perfer the first alternative.

Can't boot snow leopard from external drive

I have a copy of snow leopard installed on a separate usb hard drive which I use to run some PowerPC programmes under rosetta. I can attach this USB drive to my Mac Pro and also to an Intel Macbook and choose to start up on this external drive without any issues. However when I try restarting my new 2011 iMac on this external usb drive the machine crashes every time with a kernal panic. Is this problem unique to me or does everyone else have this issue with new iMacs. Mine is a 27" 3.4ghz i& with 12ghb ram installed running 10.72. Is their soemthing I can do to resolve this problem?

I have now solved the problem of being able to boot from either Snow Leopard or Lion on a new Mid 2011 iMac. This is how I did it.
1. Attach an external USB drive to an earlier Mac or borrow one from a friend. In my case I used my 2009 Unibody Macbook (which has Lion installed on it but does allow you to install Snow Leopard on an attached device) Put the Snow Leopard install disc in this machine and tell it to install Snow Leopard on your attached USB Drive.
2. Start up the Macbook (or whatever machine you are using) and get it to restart on the attached USB drive so that it boots up in Snow Leopard. Then when Snow Leopard is up and running on the attached external drive, do a software update to bring it up to 10.68 (the current version). This step is important as I found that if I plugged in the external USB drive into the iMac with only operating system 10.6 installed it would cause a kernal panic on start up when I choose to start up on the external USB drive.
3. With Snow Leopard updated to system 10.68 you can now plug it into your iMac and restart the iMac booting into Snow Leopard from the external USB drive. You do this by either going to System Preferences>Startup disk and choosing the external drive, or by holding down the option key when you restart your Mac and choosing the external USB drive.
4. The next step is to make your iMac dual boot now that you know it can run Snow Leopard successfully from an external USB drive. To do this, go into Utilities>Disk Utility and select your main drive. Select the main disk (with Lion on it) and then choose Partition and choose 2 Partitions. Drag the first partition bundary line down to make the second partition size as small as possible. In my case I had a stock 1TB drive and the smallest partition size it would allow me was 70gb. Create the second partition (assuming you have spare space on your drive to allow this to happen). This will then create a second hard drive icon on your desktop. I renamed mine "Snow Leopard startup".
5. Download the free (and excellent) utility Carbon Copy Cloner and use it to copy your Snow Leopard operating sytem from your attached USB external drive to your new partition.
6. That's it! Now you can choose to start up your iMac from either Lion or Snow Leopard using either method mentioned in 3 above.
7. As a final step I suggest your install your Rosetta only programmes in your new Snow Leopard partition so that you can access them easily and keep them all together.

Cannot install Snow Leopard onto external drive

I'm attempting to install Snow Leopard on a second drive, an external bare drive in an Icy Dock enclosure connected to a MacPro (running 10.6.6) via serial port. Apple Disc Utility confirms that the external drive (a Seagate 325gb) has a partition map scheme GUID Partition Table. SMART Status is not supported. Connection Bus reads as SCSI but it's connected with a serial cable.
I'm able to perform the first part of the install by selecting the external drive but when I have to restart and complete the install from the original Snow Leopard disc (10.6), the external drive no longer shows up. I've tried several times and have restarted the Icy Dock external drive enclosure.
Any ideas? Thank you.

Not necessarily. Use a backup utility so that you can deselect all the data from within your Home folder as well as third-party applications in order to create a bootable disk but without some of the excess. Any of the following should be suitable:
Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Message was edited by: Kappy

Can I install snow leopard on an external hard drive so I can run quicken 2006, and put snow leopard on my imac harddrive

Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?

You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.)

Can I install Snow Leopard with an external disk drive?

I have been trying to update my software to Snow Leopard but I am using an external disk drive and when I try to install the software I get the message "The application 'Install Mac OS X' cannot be used from this volume". Is there any way to fix this problem?

Are you booting your computer from an external drive? If so please say why? How are you trying to upgrade to Snow Leopard? Do you have the 10.6.3 retail Snow Leopard DVD? On what drive are you trying to install Snow Leopard? Are you doing this?
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Install Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with installing OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. Then use Software Update to download and install any other needed updates for Snow Leopard.

Why can't brand new MacBookPro9,1 (OEM Mountain-Lion) boot from Snow Leopard on external drive, or internal partition?

Why can't brand new MacBookPro9,1 (OEM Mountain-Lion) boot from Snow Leopard on external drive, or internal partition?
Is this because of hardware changes? Or firmware changes? Or is it just and Apple Inc. administrative fiat?

@Steve Holton: Sorry Steve, but you're wrong about that one . I'm using 10.8 (purchased and downloaded) on the internal HD of this MBP8,3 (2.2 GHz, 17"), and I am also able to boot into 10.7.4 and 10.6.8 from external FW800 partitions.
However, I DO have problems with my MBP9,1. It came with 10.7.4 installed and ran fine. Then I purchased and installed 10.8. It ran fine but could no longer boot from 10.7.4 on an external partition. I then reinstalled 10.7.4 on the internal HD and discovered that it is still unable to boot (even 10.7.4) from an external FW800 partition.
One of Apple's Senior Support Advisors has done some remote troubleshooting but the case is still open and unresolved. An earlier Apple Support case suggested that when, I installed the downloaded copy of 10.8, there had been a "firmware update" (behind the scenes) that is now causing the problems with booting from my external partition(s). This apparently is "a bug": it is not what is supposed to happen.
So - I believe - "the problem" really has nothing to do with hardware capability. It is strictly about Apple's strategy for "managing its future customer base". If you don't like it - use something else - I am seriously considering Ubuntu as an alternative.
If there's a hidden caveat in all this it's probably "Read Appple's Licence Agreement VERY Carefully".

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck.

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

Can't install snow leopard on partition after upgrading to lion

I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can't install snow leopard.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Install DVD. When I select it a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in snow leopard now have the icon circle saying that it is not supported by lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
How can I install snow leopard on my new partition, then I would go to "Software Updates," to get the latest version, or use one of the versions on my external HD to have both operating system.
Thanks,
DaisyMay

Hi Scottiemn,
As I was trying different things to make a partition on my HD, I made notes as to what I did, and I finally got it to work. I will try to explain what I did.
Before installing “Lion,” I backed up Snow Leopard using Time Machine to my external Seagate HD. I installed “Lion,” and found out that I could not use some of my old apps, so I did the following.
Since I am running “Lion,” I opened up disk utility and selected my MacHD (1TB), then I selected partition, and it showed “Macintosh HD” under the partition information name. I believe I selected the plus, + and it divided my HD space in half, and I named it Snow Leopard.
I then installed the Snow Leopard DVD, and restarted my computer holding down the “C” key, I held it down for about 30 seconds or more and then took my finger off of the key. As I waited I finally saw that I was on the install DVD, and on the top menu bar I saw “Utilities.” I had my external Seagate HD mounted on my desk top before I restarted my computer, I selected the “Utilities,” on the menu bar and it gave me the option to back up from Time Machine, I selected my external Seagate HD to the newly created partition I named Snow Leopard and I said “Yes.” I followed the instructions and after it was done, I went to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with Snow Leopard. On my desktop, I can see two Hard Drives, one is Macintosh HD with “Lion,” and the other is Snow Leopard.
Then, I started up my computer and I was on the Snow Leopard partition and I saw all of my apps working. I then went back to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with “Lion,” and restarted my computer and I was running “Lion.”
I am not sure why I was not able to use the DVD of SL before, but somehow I got it to work, and I hope that I have explained what I did above.
One thing, when I installed “Lion,” from the app store, I did not make a bootable DVD of the application. I went back to the app store and downloaded “Lion” again and kept it in the dock until I got Snow Leopard to work. I burned a DVD of “Lion,” and so I have a backup of it.
Since my Seagate HD has only 250 GB of space and it is an EIDE HD 7,200 rpm using an OWC Mercury Elite FW400/USB2 with the Oxford chipset 911 enclosure which I bought in 2008, I decided that since I now have my 27 inch iMac quad core i5 with 1TB that I needed a larger hard drive.
I researched the web and decided to go back to OWC and just bought a 2.0TB OWC Mercury Elite Pro “Quad Interface” 64MB with eSATA/FW800/FW400/USB2.0 with 7,200 rpm speed for $219.00. I partitioned it for Time Machine, and Carbon Copy Cloner.
I ran Time Machine, and both partitions “Lion, and Snow Leopard” are on the Time Machine partition and both HD’s are under the Carbon Copy Cloner.
I am self taught on my many iMac’s over the years, and I go to the forums to ask questions and follow the helpful hints to resolve my problems. I carefully try different things and write down what I did so I don’t repeat things.
I hope that I have explained what I did, and hopefully it will work for you.
When I want to run SL, I select in the System Preferences to start up from that disk, when I want to run Lion, I go back and select that and start up my computer running Lion.
Since I have many old apps that Rosetta uses to open them up in SL I wanted to keep that operating system. I will go back now that I have everything working and see if I really need them. I won’t rush to remove my SL partition that I created, but in time if I don’t need the older apps then I may clean out my system and just run Lion.
I run Lion now all of the time, but when I need to go back to SL, I now have the option.
Good Luck,
DaisyMay

Can I install Snow Leopard now?

I previously asked a similar question, but can I install Snow Leopard 10.6.3 in a VM, update it to 10.6.8, and then copy files to a partition on my hard drive? I have 10.6.3 retail version. (mid 2011 iMac)

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
1. Create a new partition on the hard drive.
2. Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard
        system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1. Restart the computer and after the chime press and hold down the
               COMMAND and R keys until the menu screen appears. Alternatively, restart
               the computer and after the chime press and hold down the OPTION key until
               the boot manager screen appears. Select the Recovery HD and click on the
               downward pointing arrow button.
          After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.           In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.           Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the USB
flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external drive. Source means the Snow Leopard Mac's
internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the external drive.
You will need a retail copy of Snow Leopard. If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.

Can't install Snow Leopard on a MacBook

Hi guys...
A friend of mine brought me his Macbook to fix it because the hard drive was making sounds and now won't boot.
The drive in fact is bad, it barely mount, makes noises, etc.
I've replaced the internal hard drive for a Toshiba 320gb SATA 3.
The thing is that apparently the DVD doesn't recognize my drive and of course, i can't install Snow Leopard.
My question is, is this a problem with the new drive?. I believe that being a SATA3 could be causing the problem.
Second question... Can i install Snow Leopard (somehow) using my Mac mini?
Thanks so much and i hope you can help me.
Regards.
Francisco.

Hi!!
>I've used another internal hard drive and installs correctly<
Using the DVD installer?
Yes
So it boots with another hard drive in there but ejects when you put the Toshiba in there?
Yes but it only make sense if the DVD would create a temporary partition or something in order to install the OS.
>Could it be that the drive is SATA3? <
Even so it would be downwards compatible.
I though so too
>or maybe the hd is bad?<
That would make more sense.
I'm going to clone the installation that went OK in order to see if it's actually my internal drive the problem.
Could it be the manufacturer?
Thanks so much and i'll let you know.
Regards.
Francisco.

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music and pics? And keep them synced up as I purchase more?

Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

I can't install Snow leopard on my hard disk which has 10.4.11 on and lots of space.

I can't install Snow leopard on my hard disk which has 10.4.11 on it and lots of space, I run the snow Leopard install disk and it says it cant be installed on my hard disk, which has 160 GB of space.

Which iMac? If it's a G5, the highest OS you can run is Leopard. Are you using the full retail copy of Snow, or a grey, machine specific disc from another computer? If it's the latter, that's the reason.
Message was edited by: WZZZ

Can't Install Snow Leopard on external drive

Similar Messages

Maybe you are looking for